Original
Manufacturer case
- Selection
- by model and part number
- Fit
- like the factory part
- Color
- matches the original
- Availability
- depends on the model
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 096 59 61Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
We replace lids and full cases after cracks, chips, and torn hinges. Diagnostics are free, and a technician arrives within 60 minutes anywhere in the city.
Our own technicians4 to 20 years of experience




1 yearwarranty on labor and parts
60 minutestechnician arrival anywhere in the city
from 4 to 20 yearstechnician experience
The case is replaced when cracks and chips prevent the lid from closing, hinges have torn out their mounts, or the bottom base is damaged. The technician inspects the laptop, checks the model and part number, moves the internal components into the new case, and verifies the fit of the hinges and latches.
01
Step 1
We check for cracks, hinges, mounts, and the condition of the display to determine whether you need a lid or a full case.
02
Step 2
We match the model and part number, confirm the color, and check the layout of the ports on the bottom panel.
03
Step 3
We remove the display lid and bottom panel, disconnect the cables, and transfer the components.
04
Step 4
We install the new part, snap the latches, and check the hinge fit and gaps.
05
Step 5
We reconnect the cables, turn on the laptop, and check the lid, screen, and ports.
5
Case damage is often confused with a hinge or display fault. An inspection shows exactly where the crack is and how it affects the lid misalignment.
Crack near the hinge
A crack near the hinge causes the lid to misalign when closing; the technician checks the hinge movement and the fit of the parts.
Damaged mounting points
Stripped threads or torn-out screw bosses on the bottom panel mean the base won't tighten.
Gap at the bottom panel
The gap between the lid and the base grows when closing — a sign of broken mounts on the bottom part.
Latch wear
The lid won't stay closed, but there's no misalignment — the latch and guides are checked.
Damaged screen bezel
Peeling or a crack in the bezel around the display, causing a visible gap between the glass and the lid.
If the lid is loose when open but the casing is intact, the hinge attachment to the case is checked.
Describe the symptomsThe top lid assembly includes the screen bezel and hinge mounts; the bottom base includes the mounting points for components. The display and boards are transferred.
Original
or
Analog
The table shows the cost of laptop case replacement: a starting labor price without the part and the turnaround time; the technician confirms the final amount before any repair work begins.
1–2 hourstime
from 8 500 ₸cost

BeforeAfterWe reply during working hours
Tell us the laptop model and what exactly is damaged: the lid, the bottom panel, or the screen bezel. The technician will confirm part compatibility and give you the replacement cost before starting work.

Warranty question? Call us
+7 (778) 096 59 616 127 reviews of repairs at TECH SERVICE in total
Иван Н.Order No. TSA-90991 · 30 May 2024
oursХотел вызвать на дом, но в ЖК не пускают без пропуска. Причина обращения — перегревается. Про тех сервис узнал от коллеги из офиса. Сделали так, что и не придерёшься.
Регина Ф.Order No. ZK-2023-265 · 23 July 2023
oursИскал, кто работает в субботу, у нас с женой график сложный. Уже представлял, как объясняю домашним, что техника всё. Причина обращения — не включаеться. Приговор — контроллер питания. В другом месте просили на треть больше. Не пришлось стоять в очереди, хотя народу было. Третий месяц — никаких проблем.
Ярослав С.Order No. AS-5924 · 12 December 2022
oursДруг из Сарыарки посоветовал это место. Расстроился сильнее, чем следовало. С этим и пришёл: не включается. Сергей Москоленко принял без вопросов, хотя был без записи. Оплату взяли после ремонта, а не вперёд. Нужна была новая деталь: матрица. В 19 000 уложился, как и обещали. После ремонта — как новое.
Василий Е.Order No. AST-2102-626 · 25 July 2021
oursСимптом как на ладони: перегреваеться. Сергей Москоленко провозился, но сделал. Дома включил, всё на месте.
Юрий М.Order No. AST-2107-227 · 4 July 2021
oursБыло важно успеть до конца недели, а то морозы обещали. Больше всего мешало: выгорела плата. Работает, как будто и не ломалось
Людмила Щ.Order No. AST-2012-370 · 18 July 2020
oursС чем обратился: выгорела плата. Сергей Архипов разобрался в редкой модели. Прошивка та же, ничего не сбросили.
Константин О.Order No. AST-2011-647 · 30 June 2020
oursБыло важно успеть до конца недели, а то морозы обещали. Приехал с дачи, а тут — отвалился чип. Тихо, ровно, без сюрпризов.
Геннадий Ж.Order No. AST-1910-867 · 23 March 2019
oursИскал, кто работает в субботу, у нас с женой график сложный. Жалоба одна: отвалился чип. Все функции проверил — работают
Галина Ф.Order No. ZK-2018-599 · 9 January 2018
oursСмотрел, чтобы был свой склад запчастей, а не под заказ. Расстроился сильнее, чем следовало. Жалоба одна: выгорела плата. Приговор — батарея. Созвонились, уточнили модель, сразу сказали по запчасти. 15 500 за работу и деталь, считаю нормально. Не разочаровался. Прошивка та же, ничего не сбросили!!
Мария Р.Order No. AS-3396 · 14 August 2017
oursСимптом как на ладони: шумит вентилятор. Сергей Архипов сам позванил и сказал, что готово. Проверил на всех режимах — держит
experience10 yearsLaptop repair technician
experience7 yearsPC and network repair engineer
experience11 yearsSenior mobile computer technician
experience9 yearsMotherboard repair technician
experience16 yearsPrinter repair technician
Didn’t find the answer? Message us on WhatsApp.
Ask a questionBack up important files to a separate drive and delete personal data if possible. The technician will check the contents with you and record the condition before repair so everything stays in place after the case replacement.
Most often the case is replaced after a drop: the plastic around the hinges cracks, mounts break out, and chips appear on the lid. Less often—due to worn latches or damaged screw seats.
At Tech Service: a technician can come to you or you can bring your laptop to the service center. Diagnostics are free, and based on the results the technician will tell you whether a case replacement is needed or restoration is enough.
Yes, if the bottom part is intact and the mounts are not damaged. The technician will select the right part for your laptop model to ensure compatibility and appearance.
Yes, doing it yourself can easily damage cables, hinges, or latches, and disrupt the board mounts. It's better to let a technician handle it so you don't have to replace more parts.
Yes, Tech Service provides a one-year warranty on labor and parts. If a defect caused by our work appears during this period, we will fix it free of charge.

Author: Azim K.,Laptop repair technician
Published
Updated
Tech Service replaces laptop cases in Astana as a direct provider, with no middlemen or aggregators. A technician arrives within 60 minutes anywhere in the city, or we work at our service center. Diagnostics are free, and you get a 1-year warranty on labor and parts. The technician gives you the price after free diagnostics.
Case damage isn't just about looks. Let's break down when a full replacement is needed, when restoration is enough, and why delaying the repair is risky.
| Situation | What we do | What we check |
|---|---|---|
| Cosmetic scratch, paint wear | Restoration | Integrity of edges and seams |
| Crack near hinge, mounting points intact | Lid replacement | Condition of screen mounts |
| Wobble and crunch when opening | Hinge replacement | Mounting sockets |
| Broken mounts, misalignment | Case replacement | Base geometry |
A crack near the hinge and a damaged edge gradually transfer stress to the matrix, cables, and motherboard — over time this leads to screen failure and costly repairs. The plastic around the hinge acts like a lever: each time you open the lid, the force goes not into the hinge but into the thin PCB and the cable connector. A gap in the edge seam lets dust and moisture in — they reach the motherboard and cause contact oxidation. Taping or gluing doesn't restore geometry, so the stress on components remains, and within a few weeks the lid becomes even more misaligned. If you need a laptop case replacement, Astana is a city where this work is done with checks on base geometry and mounting points. In my opinion, it's cheaper to replace one part now than to replace the matrix along with the hinges later.
Case replacement involves disassembling the laptop, transferring components, and reassembling on a new base. Let's go through the steps and see what happens to parts, stickers, and data on the drive.
Data on the drive is not affected when replacing the case, and we transfer the stickers and serial numbers from the old base to the new one. The motherboard and storage stay the same — only the case changes, so the system, programs, and files remain in place. We carefully remove the stickers with the serial number and barcode and stick them on the new base in the same order so that the device identification is not lost. The laptop case replacement price depends on the model and scope of work, and the technician quotes it after free diagnostics. During the transfer, we check the condition of the display and touchpad cables: if they are already worn, the technician will say so right away. Before the work, it's worth saving important files to an external drive — not because the procedure threatens the disk, but just in case of any service work. It's calmer for both you and the technician.
If the lid doesn't close after replacement, the cause is usually the hinge fit or a skewed frame — we check the geometry and adjust the mounts until it closes completely. The hinges on the new base may be offset relative to the old one, and then the lid hits the case sooner than it should. The technician loosens the screen mounts, sets equal gaps on both sides, and tightens the screws evenly without skewing. This situation more often occurs during self-assembly when the hinges are tightened unevenly, so it's better to entrust the fit check to a technician who is responsible for the result. We provide a 1-year warranty on labor and parts — if the lid starts sticking again, we'll return to adjust it without arguments or unnecessary explanations.
You can get a case replacement in two ways — a specialist comes to you or the device is repaired at the service center. Let's break down how each format works and which one to choose for your situation.
We travel to the client within 60 minutes across the city — the specialist inspects the device on site, performs free diagnostics, and either takes the equipment for case replacement or arranges to work on site. This format covers laptop case repair in Astana without trips: you show the damage — cracks at the corners, broken hinges, chips on the screen frame — and immediately hear the verdict on whether a full replacement is needed or a partial one will do. Then he removes the lid and records the condition of the matrix and cables so that nothing gets pulled during transport. A visit saves time if you need the device for work: on-site diagnostics immediately shows the scope of work, and you don't lose a day traveling to the drop-off point.
Repair at the service center is chosen when a full disassembly and complete case replacement are needed — that way all components are at hand, and after assembly we check the lid fit and hinge operation. On site, it's easier to lay out the board, keyboard, touchpad, and screen in separate zones without risking touching neighboring components during the transfer. The second argument is complex cases: deformation of the power frame, a crack around the hinge mount, separated seams at the base. The service format does not affect the warranty: both on-site and at the service center, it is 1 year on labor and parts, and the specialist quotes the cost after free diagnostics. We accept payment via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. In my opinion, for expensive equipment it's more reasonable to bring the device to the service center, where disassembly is done on a stable table.
The buyer is concerned about three things — how much laptop case replacement costs, how long it will take, and what the warranty covers. We answer in order.
The cost depends on the model, the scope of work, and the type of housing — full body, lid only, or hinges — and the technician gives you a quote after a free diagnostic once they see the condition of the laptop. A full replacement is the most extensive scenario: the base is disassembled, and the motherboard, keyboard, touchpad, and screen are transferred. Installing a top lid requires less disassembly but demands careful transfer of the matrix and cables. Hinges are a separate job if the plastic itself is intact but the screen mounts are torn out. How much a laptop housing replacement costs in each case also depends on the availability of the part for the specific model. Giving an exact price before inspection is misleading: the same crack might require replacing only the lid or the entire base, and the difference in disassembly affects the final cost — that's why we don't quote a figure over the phone.
We provide a 1-year warranty on labor and parts — it covers the replacement of the housing, hinges, and mounts that we installed. If after a few months the hinge starts to loosen again or the lid no longer sits tightly in place, you come back to us, and we fix the defect under these terms. The warranty covers both the part itself and the quality of its installation: a crack along the mount seam or a torn-out threaded insert is a reason for a repeat visit, not for a new charge. The terms are the same for on-site repairs and in-service work, so the format of service doesn't affect the duration and scope of warranty obligations. The only thing that matters is keeping proof of your request: with it, we can find the record of your laptop and the batch of parts. In our practice, warranty cases most often involve hinges — they are the most stressed point of the housing.
A separate question is which part to install if the laptop has long been discontinued, and why it's better to trust the work to a direct contractor. We cover both points.
| Housing type | When it fits | What we check |
|---|---|---|
| Original | Model is still on sale, exact shade matters | Part number and revision match |
| Compatible | Device is discontinued | Lid fit and hinge holes |
| Donor | Rare revision, original plastic needed | Condition of mounts and cables |
| Restoration | Cracks without geometry damage | Rigidity and hinge movement |
Here's a quick recap of what to keep in mind before you reach out: when to replace the case, how the work is done, what formats it comes in, and what to look for when choosing a technician.
If you ask, the technician will check other parts during the same visit.

If your laptop screen is broken, turn the device off first, don't press on the display, and check the picture through an external monitor.
12 March 2026 · 11 minutes read
If your laptop freezes, the first thing to do is restart it and check Task Manager to see what's loading the CPU and memory.
25 January 2026 · 12 minutes read
If your laptop won't boot, first determine which of two states you're in: the device doesn't respond to the power button at all…
13 December 2025 · 12 minutes read
If your computer won't turn on, start simple: check the outlet, power cable, switch on the power supply, and the power button.
19 January 2026 · 13 minutes read

