Original
Manufacturer part
- Selection
- By part number or machine model
- Compatibility
- Exact fit for your model
- Warranty
- 1 year on labor and parts
- When chosen
- If the part is available to order
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 746 00 26Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
We'll connect the machine to water and drainage, then check the fill and drain cycles. A technician arrives within 60 minutes anywhere in the city, and diagnostics are free.
Our own technicians4 to 20 years of experience




1 yearwarranty on labor and parts
60 minutestechnician arrival anywhere in the city
4 to 20 yearstechnician experience
The technician connects the machine to the water supply and drainage, levels it, and checks the fill and drain cycles. The price is quoted after free diagnostics, and payment is made after the work is done.
01
Step 1—
Checks for a grounded outlet, water supply valve, drain, and a level floor.
02
Step 2—
Attaches the inlet hose, checks the filter screen and connections for leaks.
03
Step 3—
Secures the drain hose to the siphon or hook, checks the height and ensures there are no kinks.
04
Step 4—
Adjusts the feet to level the machine so it doesn't vibrate or move during the spin cycle.
05
Step 5—
Checks the fill, drain, and spin cycles, and shows how to use the filter and emergency drain hose.
8
The service is ordered when buying new appliances, moving, or replacing an old machine. The technician will unpack the unit, level it, connect it to water and drainage, check its operation, and explain the main modes.
Buying a new machine
After delivery, the appliance needs to be unpacked, the shipping bolts removed, leveled, and connected to utilities.
Moving to a new place
When changing apartments, the technician will disconnect the machine from water and electricity, prepare it for transport, and install it at the new location.
Replacing old appliances
The old machine is disconnected and removed, and a new one is put in its place and connected.
Relocating to another room
If the machine is moved to another room or floor, the technician will prepare the space and reconnect it to utilities.
Built-in furniture installation
When installing in a niche or cabinet, the technician adjusts the connections so the appliance sits level and does not interfere with the door opening.
The drain filter is usually at the bottom front behind the service cover. Drain the water through the emergency hose; it may be hot.
Describe the symptomsThe part is selected by part number or machine model; for Bosch, by the E-Nr on the rating plate inside the door. Price is quoted after diagnostics.
Original
or
Analog
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
Installation and connection of washing machineexact price — after the free diagnostics
1–2 hours
from6 000 ₸
Installation of built-in washing machineexact price — after the free diagnostics
2–4 hours
from10 500 ₸
We reply during working hours
When booking, please provide the machine model, floor, and whether a water supply valve and drain are available so the technician can prepare in advance.

Warranty question? Call us
+7 (778) 746 00 266 127 reviews of repairs at TECH SERVICE in total
Ульяна Ч.Order No. AS-5524 · 13 February 2026
oursС левого берега ехать далеко, поэтому искал поближе к дому. Было ощущение, что попал на замену целиком. Основная жалоба — течёт. Ораз разрулил всё быстро. Смета — 14 500, чек дали. Нагрев в норме, посторонних звуков нет.
Василий Е.Order No. 2306-8854 · 13 March 2023
oursЗимой без техники никак, поэтому тянуть было нельзя. Причина обращения — течёт. Работает, даже лучше прежнего
Семён Ш.Order No. TSA-99469 · 19 February 2023
oursРаньше обращался в другой сервис, там очередь на две недели. Первое, что заметил: ошибка на дисплее. Сейчас пашет без нареканий.
Иван Н.Order No. AS-3287 · 17 August 2021
oursПричина обращения — не сушит. Дима всё сделал при мне, за пятнадцать минут. Сейчас пашет без нареканий.
Жамиля В.Order No. 59032 · 14 December 2019
oursБұрын басқа жерде жөндегенмін, бірақ бұл жолы осында келдім. Алдымен интернеттен қарадым, кейін осында келдім. Жұмыс істеп тұр, шағым жоқ.
Инна Н.Order No. AS-5574 · 2 December 2019
oursВ Астане с сервисами беда, поэтому выбирал по отзывам. Думал, показалас, ан нет: не отжимает. Приняли, объяснили, что и почему, без спешки. Вытащили и показали: тэн. По деньгам вышло ровно, без сюрпризов. Скажу знакомым. Функционирует, тьфу-тьфу!!
Валерия А.Order No. ZK-2018-673 · 23 October 2018
oursИскал, кто работает в субботу, у нас с женой график сложный. Ремонт стирально-сушильной машины заказывал впервые. Больше всего мешало: ошибка на дисплее. Приговор — тэн. Всё быстро, но без суеты. Гудит ровно, не перегревается.
Анастасия Т.Order No. ZK-2018-535 · 20 March 2018
oursБыло важно успеть до конца недели, а то морозы обещали. Первое, что заметил: течёт. Полёт нормальный.
Вера Э.Order No. AST-1703-745 · 15 July 2017
oursС чем обратился: не греет воду. Дима сам позвонил и сказал, что готово. Гудит ровно, не перегреваеться.
Олег Х.Order No. AS-1493 · 18 June 2017
oursОфис на Кабанбай батыра, технику туда и повёз. Привёз на диагностику: стиральная машина. С чем обратился: шумит при отжиме. По деньгам вышло ровно, без сюрпризов. Обошлось заменой: помпа. Диагностику провели при мне, ничего не унесли в подсобку. Скажу знакомым. Ни шума, ни запаха, всё штатно.
experience10 yearsSenior washing machine technician
experience16 yearsWashing machine installation technician
experience12 yearsWashing machine repair technician
experience10 yearsWashing machine board repair technician
experience11 yearsDishwasher repair technician
Didn’t find the answer? Message us on WhatsApp.
Ask a questionYou need a level spot with a solid floor, a grounded outlet, a cold water supply with a shutoff valve, and a drain connection. The technician removes the shipping bolts — without that, the first run is not allowed.
It's better to leave a small gap: the hoses and plug need room, and the body needs ventilation. If it's right up against the wall, the machine may rub against it during the spin cycle and make more noise.
Yes, if the model has a removable top cover and fits under the countertop in height. The space should be ventilated, and the hoses and outlet should remain accessible.
They must be removed before the first run, otherwise the drum hits the body and the machine breaks down. During installation, the technician does this and checks that all bolts are unscrewed.
Water is drained into the sink siphon, a sewer pipe, or a riser through a check valve. The main thing is to secure the hose with a bend so dirty water doesn't get pulled back into the machine.
Connecting is just water, drain, and electricity, while installation is broader: removing the bolts, leveling the body, checking clearances, and doing a test run. The technician combines both steps in one visit.

Author: Vladimir V.,Senior washing machine technician
Published
Updated
Tech Service installs washing machines in Astana with home visits: a technician arrives within 60 minutes anywhere in the city, removes the shipping bolts, levels the machine, connects it to water and drain, and runs a test cycle. Diagnostics are free, and there's a 1-year warranty on labor and parts.
Buyers often confuse installation and hookup — that's where vibration on the first spin and arguments about who's to blame come from. The difference is fundamental: hookup is only part of the installation. Let's separate the concepts and explain when you need a technician and when connecting to existing utilities is enough.
Hookup is just connecting the inlet and drain hoses to water and sewer, while full installation also includes removing shipping bolts, leveling the cabinet, and a test run. The bolts secure the drum during transport: until they're removed, the drum doesn't cushion and bangs against the cabinet during rotation. Leveling is needed so all four feet rest on the floor with equal force — tilting causes knocking and leads to drum misalignment. A test run shows whether the connections hold pressure, whether water drains properly, and whether the electronics throw an error. If the machine was just hooked up but the bolts weren't removed and it wasn't leveled, it vibrates and jumps on the first spin — the most common cause of damage after DIY installation.
We come out both to install a new machine from the store and to move existing equipment to a new location — in both cases the work starts with free diagnostics. A technician arrives within 60 minutes anywhere in the city, and washing machine installation services include removing bolts, leveling, hookup, and a test run check. You should only do it yourself if the utilities are already installed and tested, and the machine stays in the same place. Moving is more complex than installation: before moving, you need to drain the water through the emergency drain hose behind the service panel at the bottom front, placing a towel underneath — the water can be hot. Our warranty on labor and parts is 1 year, so on a repeat visit the technician rechecks all installation steps.
We break down step by step what the technician does from arrival to test run — so you understand what you're paying for and how each stage is checked.
Our work from scratch takes less time than you might think: a specialist arrives within 60 minutes anywhere in the city, and on site goes through all steps in sequence without pauses. Installation begins with removing shipping bolts and leveling the cabinet, then we connect the inlet hose to the tap and route the drain to a siphon or sewer. Washing machine installation in Astana follows the same sequence, just with a test run check. After that we run a short cycle and watch how the machine fills, drains, and behaves during the spin: vibration, drips under the cabinet, and drain errors on the display show up right here. During the test run we confirm all connections are leak-free and the feet are stable. You can tell the job was done wrong by the first signs — drum shaking, moisture under the machine, or a drain error code; the technician catches all of this immediately rather than leaving it for the "first wash".
We explain how to prepare the site before the technician arrives — floor, water, drain, power, and clearance from walls — and how a typical bathroom differs from a kitchen.
| What you need | Why | What it looks like in practice |
|---|---|---|
| Level floor | The machine can be leveled | Concrete or tile with no slope |
| Dedicated water tap | Stable pressure for washing | Tapping into the water supply near the machine |
| Drain point | Water drains without leaks | Siphon, dedicated pipe, sewer |
| Grounded outlet | Safety when working with water | Dedicated circuit or nearby outlet |
| Clearance from walls | Ventilation and less vibration | 3–5 cm from the back and side walls |
We install machines in both the bathroom and the kitchen — the choice of location depends not on the room but on whether water, drainage, and grounded power are nearby. If the bathroom already has a sewer pipe and a water supply tap, installation goes faster. In the kitchen there's usually no floor drain, so water is routed to the sink siphon through a hose with the correct slope — without it, liquid stagnates and odors appear. In both cases we use a grounded outlet and don't place it directly above the machine. Washing machine installation price depends on on-site conditions, so the technician quotes after free diagnostics. Before the visit we check where the sewer goes and where the power point is — so the technician knows in advance what utilities they'll be working with. If drainage only goes through the sink siphon, check that it's not clogged: otherwise the first spin will leave water on the floor.
We break down three typical post-installation symptoms — vibration, leaks, and a drain error — and explain where the cause is in the technician's work and where a component failure begins.
Vibration during spin is most often due to an unleveled body or shipping bolts that weren't removed, while a leak from the bottom points to hoses, the pump, or connections. Check the feet: the machine should stand level, without rocking on the floor, otherwise the drum at high speeds (usually 800–1600 rpm depending on the model) hits the walls and "walks" out of place. Shipping bolts must be removed completely — leaving even one makes the machine hum and jump on every spin. A leak from the bottom indicates loosely tightened inlet hose connections, a loose hose clamp, or a clogged filter causing water to overflow. If it leaks at the front near the door rather than the bottom, that's the door seal, not the connections; this symptom points to worn parts, not a technician error.
For us, error E18 or F18 (d02 on some models) after installation usually means a clogged filter or a kinked hose, not a pump failure. Check the line for bends behind the machine — it shouldn't be routed under the machine or pinched by a foot. The filter is at the bottom front behind the service panel — unscrew it first, placing a towel underneath, because the water may be hot. On Samsung the same symptom shows as 5E (SE, E2), on Electrolux E20, on Indesit and Hotpoint F05, but the code meaning depends on the model, and the technician checks it against the table for your machine. If the filter is clean, the hose is clear, and the pump hums without draining — check the impeller by hand: a seized pump won't show on a multimeter. A Tech Service technician arrives within 60 minutes in the city, diagnostics are free, and the warranty on labor and parts is 1 year.
We explain exactly what the installation warranty covers, how free diagnostics work, and why the work is done by a direct contractor rather than an intermediary from an aggregator.
We provide a 1-year warranty on labor and parts. If the door seal leaks after installation or the machine shows a heating error, that's a separate issue: it gets diagnosed from scratch rather than blamed on the technician's work. Before the visit, ask the specialist whether your problem falls under warranty or regular repair. Failures of components not related to installation are separate issues and are handled through the standard repair process. If the machine doesn't behave as expected after installation, the technician first checks the connections and leveling, and only then concludes that a part has failed. This approach helps separate the effects of installation from wear or a manufacturing defect and choose the right procedure to fix the problem.
Our washing machine installation technician will come to you — a Tech Service specialist, not a middleman from a marketplace — and a visit anywhere in the city takes 60 minutes. Our technicians have 4 to 20 years of experience, so they work with machines bought from any store and with models that have already been in use. Diagnostics are free: before starting work, the specialist inspects the location, checks the water supply and drain connections, assesses the condition of the utilities, and only then quotes the price. The technician gives the cost of washing machine installation based on the inspection. You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. He gives the final amount after the free diagnostics, once he has inspected the location and assessed the scope of work. A direct contractor means the same person who came is responsible for the result: you won't have to hunt for someone to blame in the dispatch office.
Here are the key points that determine the outcome of installation, from preparing the space to the warranty on labor. Below is a short list of the main takeaways for equipment owners.
If you ask, the technician will check other parts during the same visit.
Refrigerator Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
Washing machine error codes are self-diagnostic codes that point to a specific component: drain, water fill, heating, motor, or door lock.
29 January 2026 · 13 minutes read
If your washing machine won't spin, it's usually an unbalanced load, a clogged drain filter or hose, and less often the pump, belt…
19 January 2026 · 12 minutes read
If your washing machine isn't heating water, the heating element or temperature sensor is usually to blame, less often the control board or wiring.
25 December 2025 · 12 minutes read
If your washing machine won't turn on, first check the outlet, extension cord, and the circuit breaker in your panel, then the plug and power cord.
24 November 2025 · 13 minutes read