R410A
Common refrigerant
- Application
- Split systems and multi-splits
- Recharge
- Weight only, accurate to the gram
- Note
- Must not be mixed with other refrigerants
- Filter drier
- Replaced when the circuit is opened
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 746 00 26Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city, and diagnostics are free. We recharge refrigerant by weight and check the circuit for leaks.
Our own technicians4 to 20 years of experience




1 yearwarranty on labor and parts
60 minutestechnician arrival anywhere in the city
Freediagnostics
Recharge starts with diagnostics: the technician checks the pressure, looks for leaks, and only then adds refrigerant. We provide a 1-year warranty on labor and parts. A technician arrives within 60 minutes anywhere in the city.
01
Step 1quick
The technician connects gauges to both lines and compares the readings with the standard for your model.
02
Step 2quick
They inspect connections and flare fittings, check joints with soap bubbles, and pressure-test with nitrogen if needed.
03
Step 3quick
Before recharging, the circuit is vacuumed to remove air and moisture — this is important for stable operation.
04
Step 4quick
Refrigerant is added on a scale exactly as specified on the outdoor unit's nameplate.
05
Step 5quick
The technician measures the temperature at the indoor unit outlet and makes sure the AC is cooling.
5
Five signs point to low refrigerant. Diagnostics confirm the exact cause: similar symptoms can occur with clogged filters or a faulty compressor.
Compressor runs nonstop
The AC runs without pauses or frequently shuts off on protection — a separate symptom unrelated to icing or electricity bills.
Frost on pipes and unit
Frost or ice appears on the copper pipes, indoor or outdoor unit — a sign of pressure drop in the circuit.
Oily residue
An oily trace is visible at joints and flare fittings — oil can escape along with refrigerant, indicating a leak.
Hissing or bubbling
You hear sounds in the pipes that weren't there before — this can indicate a refrigerant leak.
Higher electricity bill
Under the same load, the AC consumes more electricity due to continuous operation.
Note the outdoor temperature and mode when the problem occurs — this will help the technician find the cause faster.
Describe the symptomsHousehold ACs most often use R410A and R32, less commonly other types. The type is indicated on the outdoor unit's nameplate and is selected by the marking.
R410A
or
R32
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
Diagnostics and pressure check before refillexact price — after the free diagnostics
1–2 hours
from4 500 ₸
Full refill of split system 07–12 000 BTU (up to 1 kg)exact price — after the free diagnostics
2–4 hours
from10 000 ₸
1 visittime
from 10 000 ₸cost

BeforeAfterWe reply during working hours
A technician will arrive within 60 minutes in the city, and diagnostics are free. 1-year warranty on labor and parts.

Warranty question? Call us
+7 (778) 746 00 266 127 reviews of repairs at TECH SERVICE in total
Ескендір Т.Order No. AST-2612-488 · 16 May 2026
oursКеңседегі құрылғы, чек пен акт керек еді. Құрылғыны әкелдім, бірден қабылдады.
Римма Х.Order No. TSA-32418 · 23 June 2025
oursС чем обратился: ошибка. Дамир М отсоветовал дорогой ремонт, предложил простой. Пользуюсь и вспоминаю добрым словом.
Инкар Д.Order No. AS-8192 · 15 June 2025
oursҚабылдау тез болды, кезек жоқ. Кепілдік берді, бұл маңызды. Мастер бәрін түсіндірді. Қосымша жұмыс қажет болды, бірақ бағаны көтермеді. Диагностика тегін болды. Жұмысты сол күні аяқтады. Түскі үзіліске қарамастан қабылдады. Ризамын, рахмет
Олег Х.Order No. TSA-26501 · 10 October 2024
oursИскал, кто работает в субботу, у нас с женой график сложный. Заявку оставил на всякий случай, а зря время тянул. Симптом как на ладони: шумит. Всё оформили по договору, с печатью и подписью. 23 500, и гарантия в комплекте. Замена: дренаж. Тихо, ровно, без сюрпризов.
Виолетта Д.Order No. AS-1933 · 21 February 2023
oursС левого берега ехать далеко, поэтому искал поближе к дому. Уже представлял, как объясняю домашним, что техника всё. Симптом как на ладони: ошибка. Дамир М сам позванил и сказал, что готово. По факту меняли: компрессор. Вернули — проверил, всё ок)
Борис В.Order No. TSA-62079 · 17 February 2023
oursБольше всего мешало: ошибка. Никита М посмотрел и честно сказал: менять не надо. Ребята из techservice сидят в Астане давно. Сейчас пашет без нареканий.
Мерей Р.Order No. AS-1585 · 18 July 2022
oursӘйелім «таста» деді, мен көрсетуді жөн көрдім. Барлығы ресми, чек берді. Екі күннен кейін өзі қоңырау шалды. Қосымша жұмыс қажет болды, бірақ бағаны көтермеді. Жақсы сервис.
Денис Л.Order No. AS-7412 · 15 July 2022
oursВыбирал между официальным и этим, выбрал этот. Расстроился сильнее, чем следовало. Жалоба одна: не холодит. Тихо, ровно, без сюрпризов.
Мария Р.Order No. AS-5190 · 8 June 2018
oursРаньше обращался в другой сервис, там очередь на две недели. С этим и пришёл: не холодит. Внешне не видно, что разбирали.
Ангелина Я.Order No. 1702-5906 · 9 October 2017
oursПозвонил в четыре места, тут ответили по-человечески. После скачка напряжения — не холодит. Внутри оказалось: вентилятор. По деньгам вышло ровно, без сюрпризов. Позвонил, объяснил, сказали подъезжать — примут без записи. Вернусь при необходимости. Работает, даже лучше прежнего)
experience10 yearsAir conditioner refill technician
experience2 yearsAir conditioner cleaning technician
experience14 yearsAir conditioner chemical cleaning specialist
experience15 yearsMobile air conditioner technician
experience15 yearsLead HVAC specialist
Didn’t find the answer? Message us on WhatsApp.
Ask a questionConsumption depends on the model, room size, and mode: on average, a household split system uses little for cooling, but with constantly open windows and worn-out refrigerant, the load increases. The exact kilowatt figure is given in the specification sheet of the specific model.
Open windows cancel out the cooling: the unit runs non-stop, and the cold air escapes outside. This drives up your electricity bill and wears out the compressor faster.
You can't recharge a split system on your own without equipment and skills: you need gauges, a vacuum pump, and the exact refrigerant weight. Without vacuuming and finding the leak, the new refrigerant will escape just as quickly.
The amount depends on the model and is indicated on the nameplate of the outdoor unit — usually a few hundred grams plus an allowance for the line length. The technician calculates grams using gauges and scales, not by eye.
The refrigerant itself doesn't get used up: if cooling is lost after a couple of years, there's likely a leak in the connections or the circuit. The technician finds and fixes it; otherwise, recharging again will only give a temporary effect.
The technician measures the pressure in the circuit with gauges and compares it with the air temperature at the inlet and outlet of the unit. If the pressure is normal but there's no cooling, they check the compressor and electrical system — recharging won't help here.

Author: Erlan Zh.,Air conditioner refill technician
Published
Updated
Tech Service provides AC refill in Astana with a technician visiting your home or office within 60 minutes anywhere in the city. Diagnostics are free, we give a 1-year warranty on labor and parts, and our technicians have 4 to 20 years of experience. The technician gives you the price after diagnostics, and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies.
The split system hums and blows, but the room doesn't get cold — freon isn't always the culprit. Let's break down how to tell a leak from clogged filters, a dirty heat exchanger, or compressor wear — and why the cause isn't always the refrigerant.
In our diagnostics, about half of the "not cooling" calls turn out to be clogged filters, a dirty heat exchanger, or compressor wear rather than a leak. A dust-clogged filter blocks airflow, the indoor unit's heat exchanger gets coated, and the cold simply doesn't reach the room — while the circuit pressure is normal. A worn compressor hums but doesn't create the needed difference between the high and low pressure circuits, and adding refrigerant won't change that. During the free diagnostics, the technician measures pressure on both circuits, checks the compressor current, and inspects the heat exchanger. If cooling doesn't fully return after a top-up, the technician checks the compressor and pressure circuits — adding freon without fixing the cause only delays another call. An AC refill with a technician visiting your home starts with exactly this check, so you don't pay for extra freon.
Let's look at which refrigerants are found in household splits, how they differ in properties, and why mixing two different types is unacceptable during service.
| Freon type | Where it's found | Feature |
|---|---|---|
| R410a | Most household split systems | Operates at high pressure |
| R32 | Newer AC models | Not compatible with R410a |
| R22 | Older units | Being phased out |
For a standard 7–9 BTU residential split system, we charge the amount of refrigerant specified by the manufacturer on the nameplate — a Tech Service technician fills by weight, not by eye. The exact mass is taken from the model's data sheet: it depends on the line length and pipe diameter, so if the line is extended, the norm is recalculated. The price for air conditioner refilling depends on the amount of refrigerant and the model, and the technician quotes it after a free diagnostic. Before adding refrigerant, the high- and low-pressure circuits are checked with gauges for leaks — a leak at this stage makes the procedure pointless unless the cause is fixed. Superheat at the compressor inlet is also checked separately: it shows how much liquid refrigerant returns to the unit and whether there is a risk of slugging. The correctness of the work is confirmed by the pressure in the circuits and superheat: if the pressure is normal but there is no cooling, the cause is in another component, and the technician continues diagnostics. In my opinion, it is the superheat check that distinguishes careful service from a quick job — pressure alone doesn't tell the whole story.
We break down the technician's steps on site — from free diagnostics to the final system test. This way you'll understand what stage you're paying for and when each operation is performed.
Our technician arrives with his own equipment, starts with a free diagnostic, looks for leaks, vacuums the system, and only then fills it with refrigerant. First, he measures the pressure in the circuit, checks the temperature at the indoor unit outlet, and inspects the connections for oil traces — they usually show where refrigerant is escaping. Then he connects a station with gauges and a vacuum pump, evacuates the remaining refrigerant, and holds the line under vacuum to remove moisture and air from the circuit. After that, he fills refrigerant by weight or by superheat — the method depends on the system type — starts the air conditioner, and compares the parameters with the factory specifications. Vacuuming before adding refrigerant is mandatory — without it, moisture and air remain in the line, causing the compressor to wear out faster.
For a residential split system in an apartment, we refill on site in one visit, while office and semi-industrial systems require more refrigerant and access to the lines. In an apartment, there is usually one indoor and one outdoor unit with a short line — a standard kit and one connection point are enough for the technician. In an office, it could be a multi-zone system or a cassette unit with long inter-unit communications: refrigerant is needed many times more, and sometimes there is no free access to the line, so part of the work is moved to the outdoor unit. We perform air conditioner refilling in Astana both at home and in the office — Tech Service arrives as a direct contractor, without intermediaries. Washing the air conditioner before refilling is not mandatory, but if the heat exchanger is clogged, the technician will suggest cleaning — otherwise cooling won't return fully even after refilling.
Before the technician arrives, it's enough to clear access to the equipment and prepare a power outlet. We'll explain what steps are needed before the visit, how many minutes it takes for the mobile technician to arrive, and whether there are seasonal restrictions on service.
Our technician arrives within 60 minutes anywhere in the city, but in winter we only perform the work when weather conditions allow — in severe cold the procedure is limited. AC refills at home are done on site, without removing the unit or taking the blocks away. The technician comes to you with their own diagnostic equipment, so you don't need to buy anything extra. If it's below freezing outside, they first assess whether the procedure is suitable for your specific split-system model. Sometimes it's postponed to a warmer period to avoid damaging the compressor — low temperatures change the pressure in the circuit and make it hard to dose the refrigerant correctly. In our experience, inverter compressor models require especially precise pressure control during winter service, and the technician checks the manufacturer's specifications before connecting the cylinder.
This section covers what our warranty includes, why working directly saves you time and money, and what makes up the final service price.
Our 1-year warranty covers both the technician's work and the parts, if a component had to be replaced during repair. The responsibility for the result lies with the same service that came to your site, not a third party. If the cooling stops again after service, the technician returns under warranty and looks for the source of the problem again, rather than just topping up the refrigerant. Most repeat leaks are caused by a bad flare, a cracked nut, or a worn valve core — these are checked before the visit so we don't have to come back a month later. The warranty on the compressor and other expensive components only applies when we replaced them ourselves. AC refill prices are transparent: the technician quotes them after free diagnostics, and the warranty then covers the work performed. In my view, a repeat warranty visit is the most honest indicator of quality: it shows how the technician looked for the fault rather than just treating the symptom.
Tech Service is a direct contractor, not an aggregator: our own technician comes to you and quotes the price after free diagnostics. Diagnostics is included in the visit and isn't charged separately — first they measure pressure, inspect the circuits, and find the leak, then they give you the price. The total depends on how much refrigerant needs to be added and the condition of the system: if a valve core or flare needs replacing, that work is added to the list. Direct contracting means no middleman markup, and Kaspi QR, Kaspi Red, card, cash or bank transfer are accepted on site. Our prices are based on the actual inspection, with no hidden fees for traveling within the city. Our experience shows that when the technician is personally invested in the result, they won't just top up refrigerant in a system with a leak — they'll fix the defect first.
Here's the key information about AC refills — a quick summary to help you decide.
If you ask, the technician will check other parts during the same visit.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Air conditioner errors are codes on the display or flashing indicators that show which component has failed.
5 March 2026 · 12 minutes read
If your air conditioner is leaking, first turn it off and cut the power, place a container under the drip, and move any wiring away from the water.
19 October 2025 · 12 minutes read
Gas boiler errors are codes on the display or a flashing indicator that point to a specific component: ignition, pressure, draft, sensor, or control board.
10 February 2026 · 11 minutes read