Tech Service is a direct provider of headphone repair in Astana: our technician arrives at your home within 60 minutes anywhere in the city or repairs in our service center. Diagnostics are free, the technician gives you the price after diagnostics, and there is a 1-year warranty on labor and parts. We take wireless, on-ear, over-ear, and wired models.
Which headphones and brands we repair
We accept all main types of headphones—from TWS earbuds to over-ear—and work with popular brands. Below we explain which categories we handle and which brands customers bring most often.
Which types of headphones we repair
- Wireless TWS: earbuds and in-ear models—most often we replace the battery in the earbud and clean the contacts in the case.
- On-ear: with a headband—we fix the headband, replace the ear pads, and restore sound in one channel.
- Over-ear: around-ear cups—we re-cover the headband, replace the ear pads, and eliminate driver distortion.
- Wired: classic with a jack—we resolder the connector and fix a broken cable at the plug.
- With noise cancellation (ANC): we separately check the system microphones and the seal after reassembly.
- Gaming and sports: models with a microphone and water resistance—we clean sweat from the mesh and restore charging contact.
Which brands we work with
Most often people bring us AirPods, Sony, Sennheiser, Beats, and JBL—our technicians have experience with typical failures for these brands. Each brand has its weak spot: with AirPods it's the contacts in the case that stop the earbud from charging; with over-ear Sony and Sennheiser it's the headband and ear pads that wear out with daily use; with Beats it's the flex cable and connector that suffer from sharp pulls on the cable. For JBL, technicians more often see battery wear in portable models and loose hinges on folding designs. We repair headphones in Astana for all these brands, so the technician immediately checks the typical component instead of taking the device apart blindly. In my opinion, it's the brand-specific failures that help you quickly understand whether a particular pair is repairable.
What to do if your model isn't on the list
If your model isn't on the usual list, still submit a request—the technician will look at the headphones during free diagnostics and tell you what work is possible. Rare and discontinued pairs are not a lost cause: some work is done based on inspection rather than a catalog, so the decision is made after checking, not by brand name. Our technicians have been working with headphones for 4 to 20 years and can tell from the housing design, driver mounting, and connector type what can be replaced and what requires a non-standard approach. And diagnostics are free: they are performed before any work, and after the inspection you get a clear list of what makes sense to do. This check saves time—you don't have to figure out in advance from a description whether a particular pair will be accepted for repair.
What breaks in headphones and what the technician does about it
Let's go over the most common complaints—no sound, not charging, distortion, won't connect—and show what usually causes them and what the technician does.
No sound in one earbud
Most often the cause is the flex cable, driver, or contacts—the technician checks both earbuds during free diagnostics and identifies the exact cause. We disassemble the housing and test the flex cable from the board to the driver: a broken wire, loose connector, or cracked solder joint all produce the same symptom of 'silence on one side.' We check the driver separately—on a working channel it sounds clear, while on the problem side it cuts out or distorts. After a fall, sound loss is not due to a burnt driver but to a loose flex cable or cracked solder, so don't rush to replace the driver—diagnostics come first. In my experience, half of such cases are resolved by resoldering the contact without replacing parts. Bring the device along with the cable and case if you have them—that makes the check faster.
Headphones won't charge
- TWS earbuds won't charge in the case: oxidized contacts on the earbud stem or in the case slot — we clean them and check the charge.
- The charging port won't hold the cable: a loose USB-C or Lightning port — a common issue on over-ear models after sudden movements.
- The indicator is on but the charge isn't growing: a worn-out battery or charging board — the technician measures voltage during diagnostics.
- The case won't charge at all: a damaged cable or contacts in the case itself — we check both elements one by one.
- One earbud charges, the other doesn't: dirty contacts on one side or a break in the power circuit — we look into it after cleaning.
Crackling, humming, or Bluetooth connection issues
Crackling and humming are usually related to the speaker or the board, while Bluetooth problems point to the control board or settings, and the technician first checks whether the earbuds are the culprit. We connect the device to another signal source: if the crackling persists on a second phone, the cause is internal — a damaged driver, a detached diaphragm, or a microcrack on the board. If the sound is clean on another source, the issue is in the settings or the phone itself. Humming and whistling during calls are often caused by a microphone with a clogged mesh — it gets cleaned and checked separately. If the earbuds won't connect, it's not always a breakdown — sometimes the phone is to blame, and testing on another signal source during diagnostics separates a settings issue from a repair. Bring the phone the earbuds worked with — it helps the technician confirm or rule out the diagnosis faster.
How the repair goes from request to pickup
We'll walk you through the earbuds' journey from first contact to pickup: each stage, what the free diagnostics include, and when the technician names the final price.
Request and free diagnostics
- Taking your request: you describe the symptom — no sound, won't charge, crackling — and the specialist records the model and complaint.
- Home visit: our technician arrives within 60 minutes anywhere in the city, or you can bring the earbuds to the service center yourself.
- Free diagnostics: we check sound, charging, and Bluetooth connection — no charge for this.
- Disassembly and inspection: the case is opened, the board, contacts, and cables are checked to find the real cause.
- Preliminary findings: after the inspection, it's clear what work is needed and which parts affect the final price.
Approval of work and pricing
The technician names the price after the free diagnostics — before any work starts, you understand what operations are needed and why. The technician lists the faults found, explains which parts will need replacing, and states the price for labor and parts. Approval happens before the case is opened: you decide whether to proceed or stop at diagnostics, and no action begins without your answer. If opening reveals a different cause — say, a cable instead of the speaker — the specialist comes back to you with an update rather than doing it "as is." This approach protects you from surprises at the end: the price you heard and the price you pay match, and any questionable parts are discussed in advance. In our experience, most refusals happen when the client wasn't told upfront what they're paying for — so we go over every item before work begins.
Repair and pickup
After approval, the technician performs the work — battery replacement, speaker replacement, cable soldering, or contact cleaning — and you get your earbuds back with a 1-year warranty on labor and parts. The scope of work depends on the operation: cleaning contacts and replacing ear tips differ from replacing a TWS battery or soldering a cable, so the list of operations is named after diagnostics, not in advance over the phone. At pickup, you check the sound in both earbuds, the microphone, and the connection to your phone — all done in your presence before handover. The 1-year warranty covers both the work and the installed parts: if the fault returns within this period, we review the case. Payment is accepted in any convenient way — cash, card, or transfer. Keep the description of the work performed: it makes it easier to match your request to a warranty case if one arises.
On-site repair or at the service center
Let's look at when it's more convenient to call a specialist to your place and when it's better to bring your headphones to the workshop. Below are two scenarios and their differences.
When the technician comes to your home
The specialist reaches the client within 60 minutes anywhere in the city — this is convenient if you need your headset daily and don't want to part with it for long. This format is popular with Almaty residents who work from home or spend the whole day on calls: the visit saves you from traveling across town and waiting in line. At home, we mostly perform work that doesn't require disassembling the case or special tools: cleaning contacts in the case and on connectors, replacing ear tips, repairing a frayed wire on wired models. If full headphone repair with complex disassembly is needed, the specialist takes the device to the workshop to avoid opening it mid-air. If you're unsure whether a home visit is enough, describe the problem when you request service: the technician will tell you in advance what can realistically be done on-site and what requires a workshop setting.
When you need repair at the service center
If you need a battery replacement in TWS, ribbon cable soldering, or board repair, the headphones are fixed in the workshop — there are conditions for precise work. The case of a TWS model is held together by adhesive seams and latches, and it's easier to open it on a stable surface with good lighting, not on the edge of a table in the hallway. The control board and ribbon cables require care: incorrect heating damages the traces, after which noise cancellation (ANC) and synchronization between earbuds suffer. The workshop format doesn't mean "longer": the technician immediately sees what's needed and doesn't waste time on a second visit — for complex work, this is faster than trying to do everything at home. Moreover, diagnostics are free with us, so even if you decide not to proceed after the inspection, you lose nothing.
Comparison of options
| Situation | Where it's more convenient | What the technician does |
|---|
| Cleaning contacts, replacing ear tips | At home | Arrives within 60 minutes |
| Wire repair | At home | Arrives within 60 minutes |
| Battery replacement in TWS | At the service center | Opens the case, replaces the battery |
| Ribbon cable soldering, board repair | At the service center | Precise work with the board |
| Headband reupholstery | At the service center | Removes and reupholsters the headband |
Warranty and why a direct contractor is more reliable than an intermediary
Let's look at what protection a one-year warranty provides, how a direct contractor differs from an aggregator, and how this affects headphone service.
What the 1-year warranty covers
We provide a 1-year warranty on labor and parts — if something goes wrong after service, you come back to us instead of looking for a new technician. The protection covers two different things: the soldering performed, connector replacement, or headband reupholstery, and separately the installed parts. If the battery or speaker fails prematurely, the replacement is covered by the warranty, not at your expense. The owner more often sees a part failure rather than a work error: the connector is soldered correctly, but the battery loses capacity. In our practice, the warranty on parts means no less than the warranty on labor — when you contact us, the technician first checks which component failed and only then decides what to replace. Keep the description of the work performed: it makes it easier to match the failure to a specific replacement.
How a direct contractor differs from an aggregator
Tech Service is a direct provider: our technicians have 4 to 20 years of experience, and we don't pass your request to a third party. The technician comes to you and is responsible for the result — from diagnostics to handover. With an aggregator, you don't know who will actually fix the device or what warranty that specific technician will give. With a direct provider, one company is responsible for the work and the warranty: if something goes wrong, you go back to the same place that did the repair instead of starting your search over. The difference also shows when a refusal is discussed: our technician who did the service remembers the device and its weak spots. So when choosing a contractor, ask who physically performs the work and who issues the warranty — that eliminates half the disputes before work even begins.
How to pay for the repair
You can pay via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies — you don't have to adapt to a single way of paying. The technician gives you the price after free diagnostics, once the cause of the failure and the scope of work are clear. Payment is taken after the work is agreed, so you pay for the agreed scope, not for a preliminary estimate. This is convenient when the fault turns out to be different from what was expected: you see upfront what you're paying for and can decline unnecessary steps. If headphone service in Astana is done at your home, payment is handled there too — the technician carries everything needed to accept payment. For in-shop service, the procedure is the same. So ask about payment methods in advance — that way you won't face any inconvenience at handover.
Individual services and what to know about each
Let's go over individual services — battery replacement, speaker replacement, headband re-covering, and housing restoration — and what to know about each. Some of these are done on-site, while others require in-shop conditions.
Battery and speaker replacement
We replace the battery in TWS earbuds and the speaker when cleaning and adjustment don't help and the technician confirms the need during diagnostics. In wireless models, the battery sits in the stem or the cup and loses capacity over time: the earbud holds a charge for less and less time, cuts out mid-track, or won't turn on at all after a night in the case. The speaker fails for a different reason — overload at high volume, moisture ingress, or membrane wear; then the sound becomes quieter on one side or you hear rattling. Before replacing, the technician checks the flex cable and contacts: an oxidized connector produces the same symptoms as a dead driver. Not every crackle requires a speaker replacement — sometimes cleaning the mesh or adjusting the flex cable is enough, so we rule out simple causes first and then suggest replacement. Diagnostics are free, and afterwards it's clear which part needs replacing.
Headband re-covering and earpad replacement
We re-cover headbands and replace earpads for over-ear and on-ear models — this restores comfort and appearance. Over time, the faux leather on the headband cracks and flakes, and the earpads lose their elasticity: headphones start pressing on the top of your head, slip when you walk, and the foam crumbles right onto your ears. We remove the old coating, install a new soft base, and secure it along the entire arch so the material doesn't bunch up. We replace earpads with ones that match the mounting diameter — both the fit and sound isolation depend on them: a loosely fitting pad weakens the bass and lets outside noise in. Re-covering extends the life of headphones where only the coating has "failed": you don't need to replace the headphones because of a worn headband — the housing, drivers, and electronics stay the same. The work is done at our facility, and the technician selects the material for your model.
Housing repair and water damage recovery
We can restore a cracked housing, but after water exposure we start with diagnostics — your chances of saving the headphones depend on how quickly they reach the technician. A crack in the ear cup or a split seam in the headband affects the fit and causes creaking when you move; the technician repairs the damaged areas and restores the housing's rigidity. Water is trickier: moisture reaches the control board, charging ports, and speaker contacts, and corrosion on the board doesn't show up right away — it appears a day or two after a 'successful' drying. Our technicians disassemble the housing, assess the condition of the board and contacts, and tell you what can be restored. After water exposure, it's important not to turn the headphones on — trying to 'check if they work' often finishes off the board, so it's best to bring them in for free diagnostics right away. Restored components are covered by a one-year warranty.
Headphones repair tips for better sound
Here's a quick summary: which breakdowns are most common, why diagnostics are essential, and what to look for when choosing a technician to restore your headphones.
- Restoration instead of replacement: lost sound, charging issues, distortion, and Bluetooth problems can usually be fixed — you don't need to replace the entire headphones.
- Diagnostics first: a free check reveals the exact cause; without it, you might replace a working part and still not solve the problem.
- Format suited to the task: simple jobs can be done at home, complex ones at the service center; the choice depends on the type of breakdown, not on convenience.
- Warranty as a criterion: a year on labor and parts says more about a technician than a promise to work quickly.
- Direct contractor: such a specialist is responsible for the result themselves, while an intermediary merely forwards the request.