Open until 19:00+7 (778) 746 00 26Call a technician
Tech Service technician next to a refrigerator

Liebherr Refrigerator Repair in Astana

A technician will arrive within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty.

  • 1-year warranty on labor and parts
  • Arrival within 60 minutes anywhere in the city
  • Free diagnostics

Our own technicians4 to 20 years of experience

Yerkimbek S.Vladimir V.Beknur D.Ozat K.

Repair prices

  • Diagnostics0 ₸
  • Filter drier replacementfrom3 000 ₸
  • Drain line cleaningfrom4 500 ₸
  • Door rehanging / adjustmentfrom4 500 ₸
  • Leak detection and repairfrom5 000 ₸
All prices
ours5,06 127 reviews
order database
Common faultsCommon faultsTECH SERVICE02

Common Liebherr refrigerator faults in Astana

The list goes from most to least common, and a single symptom can have several causes.

PricesPricesTECH SERVICE03

How much Liebherr refrigerator repair costs in Astana

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Filter drier replacementrefrigerant not included

1–2 hours

from3 000 ₸

Drain line cleaninglabour only

1–2 hours

from4 500 ₸

Door rehanging / adjustmentlabour only

1–2 hours

from4 500 ₸

Leak detection and repairrefrigerant not included

1–3 hours

from5 000 ₸

Door seal replacementparts not included

1–2 hours

from5 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Liebherr refrigerator repair in Astana

Temperature Not Holding Due to Thermostat

1 visittime

from 6 000 ₸cost

Problem
The Liebherr refrigerator was either over-freezing food or warming up — the compressor was not shutting off on time due to a faulty thermostat.
What we did
The technician opened the thermostat housing in the chamber, replaced the thermostat, connected the wires, and checked the compressor's on and off operation.
Result
The compressor began shutting off on time, the temperature holds steady, and food is neither over-frozen nor warming up.
I want the same
An open white refrigerator with glass shelves in a kitchen with cream-colored cabinets; a technician in an orange shirt holds a new thermostat at the open door, with the wire running into the wall of the chamber.BeforeAfter
01 / 04
All repairs
TECH SERVICE mobile technician with a tool case

How Liebherr refrigerator repair works at your home in Astana

From request to final check, it's five steps. Diagnostics are free.

  1. Requestsame day

    The technician asks about the symptom and model to prepare the right tools.

  2. Arrivalwithin 60 minutes

    The technician arrives anywhere in the city within 60 minutes of your request.

  3. Diagnosticsfree

    The technician inspects the appliance and agrees with you on the scope of work and access to it.

  4. Repairby appointment

    Work starts after you approve it. 1-year warranty on labor and parts.

  5. Checkafter repair

    The technician explains how to start the appliance and which setting to use for the first few hours.

Leave a request

We reply during working hours

Book Liebherr refrigerator repair in Astana

Make sure there's a free outlet and access to the back wall, and keep children and pets away from the work area. Ask the technician about a convenient visit time and payment method.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 746 00 26
Customer reviewsReviewsTECH SERVICE05

Reviews of Liebherr refrigerator repair in Astana

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Геннадий Ж.Order No. 2601-4185 · 28 October 2026

ours

Позвонил в четыре места, тут ответили по-человечески. Открыл — и сразу понял: не морозит. Замена: компрессор. Сравнивал — здесь дешевле. Ни шума, ни запаха, всё штатно.

Repair: refrigerator repair in

Лариса О.Order No. AST-2503-174 · 5 February 2025

ours

Искал, кто работает в субботу, у нас с женой график сложный. С этим и пришёл: намерзает лёд. Вернули — проверил, всё ок!!

Repair: refrigerator repair in

Екатерина К.Order No. TSA-51912 · 4 November 2023

ours

Проблема ровно одна: шумит. Дильмурат С отсоветовал дорогой ремонт, предложил простой. Проверил на всех режимах — держит)

Repair: refrigerator repair in

Людмила Щ.Order No. 96289 · 14 July 2022

ours

Причина обращения — не морозит. Никита М пообещал и сделал, без напоминаний. Сейчас пашет без нареканий

Repair: refrigerator repair in

Любовь Ю.Order No. AST-2210-389 · 11 May 2022

ours

Было важно успеть до конца недели, а то морозы обещали. Привёз на диагностику: холодильник. С чем обратился: намерзает лёд. Никита М отсоветовал дорогой ремонт, предложил простой. По деньгам вышло ровно, без сюрпризов. Перезвонили на следующий день, уточнили детали. Пришлось ставить: модуль. Ни разу не пожалел.

Repair: refrigerator repair in

Альбина Ю.Order No. AST-2001-960 · 27 April 2020

ours

Заявку оставил через сайт вечером, утром перезвонили. Думал, попал на дорогой ремонт. Симптом как на ладони: шумит. В другом месте просили на треть больше. Полёт нормальный.

Repair: refrigerator repair in

Юрий М.Order No. AS-9458 · 7 May 2018

ours

Искал, кто работает в субботу, у нас с женой график сложный. Заявку оставил на всякий случай, а зря время тянул. Первое, что заметил: шумит. Никита М сам позванил и сказал, что готово. Созвонились, уточнили модель, срозу сказали по запчасти. По факту меняли: модуль. Tech-service посоветовали в домовом чате. Пользуюсь и вспоминаю добрым словом.

Repair: refrigerator repair in

Инна Н.Order No. 1709-5286 · 30 October 2017

ours

Симптом как на ладони: шумит. Дильмурат С пообещал и сделал, без напоминаний. Работает, даже лучше прежнего.

Repair: refrigerator repair in

Валентина Р.Order No. TSA-79156 · 30 January 2017

ours

Заявку оставил через сайт вечером, утром перезвонили. Не хотел везти, думал, проще новое взять. С чем обратился: не морозит. Никита М — мастер от бога, если можно так сказать. В 26 000 уложился, как и обещали. Приняли вечером, хотя до закрытия оставалось минут десять. Пришлось ставить: модуль. Пять баллов. Тихо, ровно, без сюрпризов.

Repair: refrigerator repair in

Инна Н.Order No. AS-5681 · 20 August 2016

ours

Больше всего мешало: намерзает лёд. Дильмурат С объяснял без умных слов, за это спасибо. Выбрал techservice, потому что близко к работе. Сейчас пашет без нареканий.

Repair: refrigerator repair in
See all reviews

Our technicians in Astana

01 / 08
Vladimir V., senior washing machine technicianexperience10 years

Vladimir V.

Senior washing machine technician

Beknur D., stove and oven repair technicianexperience11 years

Beknur D.

Stove and oven repair technician

Ozat K., freezer repair technicianexperience11 years

Ozat K.

Freezer repair technician

Adilkhan N., washing machine installation technicianexperience16 years

Adilkhan N.

Washing machine installation technician

Daulet D., dishwasher technicianexperience8 years

Daulet D.

Dishwasher technician

Temirlan B., washing machine repair technicianexperience12 years

Temirlan B.

Washing machine repair technician

Miras O., washing machine board repair technicianexperience10 years

Miras O.

Washing machine board repair technician

Questions and answersQuestionsTECH SERVICE06

Questions about Liebherr refrigerator repair in Astana

Didn’t find the answer? Message us on WhatsApp.

Ask a question
What are the most reliable refrigerators right now?

Among premium brands, Liebherr, Miele, and Bosch stand out for consistency. But reliability depends on operating conditions and care, not just the brand.

Which refrigerator brands are best avoided?

There are no bad brands, but premium appliances like Liebherr require a technician who knows their components. For the owner, the condition of the unit and the quality of service matter more.

Which refrigerators break down most often?

We get more calls about models with inverter compressors and complex electronics, which includes Liebherr. Reliability depends on operating conditions and care, not just the brand.

Water is leaking inside the refrigerator compartment of a Liebherr — what should I check before the technician arrives?

Check if the drain hole is clogged and if the refrigerator is level. If water appeared after defrosting, let the unit run and observe.

A Liebherr refrigerator isn't cooling after defrosting — what could have broken?

Often the defrost sensor, timer, or refrigerant leak after a long idle period is to blame. A free on-site diagnostic will pinpoint the exact cause.

How is Liebherr different from a regular refrigerator, and why is it harder to repair?

Liebherr uses inverter compressors, precise sensors, and NoFrost electronics, so you need a technician who knows the brand. Regular refrigerators are simpler in design.

Repair guideArticleTECH SERVICE07

Liebherr Refrigerator Repair in Astana by Tech Service Technicians

Yerkimbek S., dishwasher repair technician

Author: Yerkimbek S.,Dishwasher repair technician

Published
Updated

Tech Service repairs Liebherr refrigerators in Astana with its own technicians who have 4 to 20 years of experience. A technician arrives at your home within 60 minutes anywhere in the city, diagnostics is free, and we provide a 1-year warranty on labor and parts. We give you the price after diagnostics.

Why Liebherr Refrigerators Need a Specialist Technician

Liebherr is premium equipment with an inverter compressor and BioFresh and NoFrost Plus electronics. We explain how these refrigerators differ from mass-market models and why a general technician risks making things worse, while brand knowledge saves time.

How Liebherr Differs from Mass-Market Models

Liebherr refrigerators are equipped with inverter compressors, a control module with a separate inverter board, and NoFrost Plus, BioFresh, and DuoCooling systems that mass-market models don't have. The inverter compressor runs smoothly, without constant starts and stops, so it lasts longer and is quieter. The electronics control cooling, defrosting, and sensors, while the inverter module handles the rotation speed. The BioFresh system maintains a separate zone with higher humidity, and DuoCooling separates the refrigerator and freezer compartments into independent circuits so odors don't mix. Because the inverter runs smoothly, a breakdown rarely looks like 'the compressor won't start'—more often it's a sensor or electronics fault, and without reading error codes, replacing the compressor would be a waste of money.

Why Liebherr Requires a Brand-Savvy Technician

Our technicians have been working with Liebherr for years and start by decoding the error code on the display, not by disassembling the compressor—this immediately eliminates unnecessary work. The Liebherr electronic module controls cooling, defrosting, and sensors, and one incorrectly read code leads away from the real cause: instead of the defrost sensor, they check the motor; instead of the inverter module, they replace the relay. At Tech Service, our specialists have 4 to 20 years of experience, and for each code on the display, we refer to the logic of the specific model line, not a generic list of faults. Ask the technician before they arrive which Liebherr codes they've seen and how they test the inverter board; if the answer is vague, it's better to look for a specialist.

Which Liebherr Models We Service

Liebherr Equipment TypeWhat We Check Most OftenHow We Work
Freestanding Refrigeratorcompressor, sensors, electronicson-site visit
Built-in Modelelectronics, door seal, hingeson-site or in the workshop
Fridge-Freezer CombinationNoFrost, defrost sensor, heating elementon-site visit
Side-by-Side and Multi-Doorhinges, bushings, DuoCoolingon-site or in the workshop
Freezer and Chest Freezercompressor, relay, door sealon-site visit

Symptoms and Error Codes in Liebherr Refrigerator Repair

We explain what the most common complaints from Liebherr owners mean—from 'not cooling but the light is on' to an error code on the display—and what you can check before the technician arrives.

Liebherr Refrigerator Not Cooling but the Light Is On

If the light inside is on but there's no cold, it's most often a refrigerant leak, a failed temperature sensor, or a control board fault, not the compressor itself. Temperature sensors send readings to the control board, and if they don't match the actual compartment temperature, the board either doesn't turn on the compressor or runs it idle. A refrigerant leak shows up differently: the compressor runs continuously, the condenser on the back wall stays slightly warm, and the compartments gradually warm up. A control board fault causes erratic behavior—the freezer stays cold but the upper compartment doesn't. After defrosting, cold may not return due to a stuck NoFrost fan—listen to see if it's running; this will narrow down the cause for the technician.

What an Error Code on the Liebherr Display Means

An error code on a Liebherr display points to a specific component or sensor, and we decode it before the visit so the technician arrives with the right part. The combinations of symbols on the panel are tied to the circuit: some codes lead to the evaporator sensor, fridge sensor, freezer sensor, NoFrost fan, or the connection between the control board and the display module. The same code can mean different things on different series, so we check it against the model of the appliance, not just the text on the screen. Our technicians have worked with the brand for 4 to 20 years and can tell from the code which components to check first. Take a photo of the code and note when it appeared — after defrosting, a power surge, or on its own; this detail is often more important than the code itself.

Humming, clicking, and gurgling in a Liebherr fridge

A steady hum from the inverter compressor is normal, but rhythmic relay clicks, gurgling from a leak, or NoFrost Plus running nonstop without shutting off indicate a fault. The inverter compressor runs smoothly without constant starts and stops, so sharp metallic clicks with pauses point to the start relay or the compressor trying to start in vain. Gurgling and hissing in the circuit along with a warm back wall are signs of a refrigerant leak, where gas escapes through a microcrack in the evaporator or a connection. A droning NoFrost Plus fan without pauses and water inside the compartment indicate a defrost failure: the drain is clogged, ice builds up on the evaporator, and the system doesn't return to a normal cycle. Record the sound on your phone for a couple of minutes — the technician can often identify the component before the visit and bring the right parts.

Common Liebherr breakdowns and what we repair

Below are the Liebherr components that fail most often and what we do with each: from weighing in refrigerant to restoring the control board and NoFrost system.

Inverter compressor and refrigerant leak

Liebherr inverter compressors are more often replaced entirely than repaired, and we recharge R600a refrigerant by weight only after nitrogen pressure testing and vacuuming the system. R600a is isobutane, used in the brand's household refrigerators, and requires precise dosing: underfilling gives weak cooling, overfilling overloads the unit. Before recharging, the circuit is pressure-tested with nitrogen to find microcracks in the evaporator or foamed section, then evacuated and the filter-drier is replaced — without it, moisture remains in the system and destroys it from the inside. In my experience, half of the calls about a fridge that stopped cooling end not with a motor replacement but with finding a leak in the circuit. Refrigerant itself isn't consumed — if it's low, there's a breach of seal, and topping it up without finding the leak will only restore cooling temporarily.

Control board, sensors, and NoFrost system

We repair Liebherr control boards at the component level, and in the NoFrost system we check the defrost heater, timer, and sensor — these are most often the cause of an error code. The inverter board controls compressor speed, so we inspect its traces and power components under magnification and test them. The heater melts frost on the evaporator, and the timer sets the cycle: if one element fails, the evaporator ices up and cooling stops reaching the compartments. The sensor may then show the wrong temperature and disrupt the entire logic of the unit. A power surge hits the inverter board before the compressor, so after a power outage it's worth checking the electronics first rather than looking to replace the unit.

What we check on Liebherr components

Liebherr componentWhat we checkWhat we do
Inverter compressorstart-up, windings, smooth operationdiagnostics, replacement if failed
Control boardcomponents, traces, inverter unitcomponent-level repair
Temperature sensorsresistance, readings on the boardsensor replacement
NoFrost systemheating element, timer, sensordefrost repair
Refrigerant circuittightness, pressurepressure testing, evacuation, recharge by weight
Side-by-Side doorshinges, bushings, gasketadjustment, replacement

How Liebherr refrigerator repair at home works

We start Liebherr refrigerator repair in Astana with a request and free diagnostics at your home, then decide whether to fix it on site or take it to the service center.

From request to technician arrival

After you submit a request, a Tech Service technician arrives at your home within 60 minutes anywhere in the city, and on-site diagnostics are free. First, he listens to how the appliance behaves: whether the compressor hums, the display blinks, or the upper chamber stays cold while the lower one works. Then he removes the back panel and checks the sensors, control board, and refrigerant circuit pressure. Based on the inspection, the owner immediately gets an explanation of the cause and how to fix it — no vague wording. Our technicians have 4 to 20 years of experience, so they recognize typical Liebherr faults by the first sign. Clear access to the refrigerator in advance and note the error code — this speeds up diagnostics and lets the technician bring the right parts.

Repair at home or at the service center

We fix most Liebherr breakdowns at your home, and take the appliance to the service center when complex work on the refrigerant circuit or board is needed. On site, the technician replaces sensors, thermostats, door gaskets, NoFrost system fans, and clears simple drain clogs. If circuit soldering, evacuation, and refrigerant recharge are required, or deep control board soldering, the appliance is transported to the workshop — where it's easier to ensure cleanliness and precision. Built-in models and Side-by-Side units more often require service due to access to components — the technician will tell you right after inspection so you don't wait unnecessarily. He will also explain which parts are needed and how long each stage will take before work begins.

What to do before the technician arrives

  • Check the power: make sure the outlet and circuit breaker are working and the plug is firmly in the socket.
  • Defrost the chambers: if there's ice, let the refrigerator thaw without tools or a knife to avoid damaging the evaporator.
  • Note the code: take a photo of the error on the display and write down when it appeared.
  • Don't disassemble the board: accessing the electronics yourself and trying to test contacts often complicates the repair.
  • Clear access: move the refrigerator away from the wall so the technician can inspect the back panel and compressor.
  • Don't restart: if a refrigerant leak is suspected, repeated start-ups stress the compressor and damage the unit.

Diagnostics, warranty, and service terms

Here you'll find information about free diagnostics, pricing, warranty, and payment, so you understand what you're paying for and what you get after service.

Free diagnostics and cost of work

Diagnostics for a Liebherr refrigerator is free with us, and the technician gives you the price after it — before any work starts. During the visit, they check one component at a time: the inverter compressor, control board, temperature sensors, NoFrost system, and refrigerant circuit. Based on the inspection, you get a clear picture — which part has failed, what work is needed, and how much it will cost. The decision is yours: you can agree right away, take time to think, or decline the service. There are no hidden fees for the visit or inspection. If the check shows no intervention is needed, you only pay for the work already agreed upon — the amount is discussed before the technician picks up a tool.

Warranty and payment

We provide a 1-year warranty on labor and parts and you can pay via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies. It covers both the replaced component and the procedure itself: if within a year the repaired Liebherr refrigerator fails again for the same reason, the technician will come and sort it out with no additional conditions for you. There are no payment restrictions — cash, bank card, or transfer all work, and you can choose the convenient method on site once the work is accepted. Our technicians have 4 to 20 years of experience with appliances, so they often understand where to look for the cause already during the inspection. The warranty applies to the specific completed order, so keep the work information — if you contact us again, the technician will quickly understand where to look for the fault.

Where to find Liebherr service in Astana

Tech Service is a direct provider: our own technician comes to your home or takes the appliance to the service center, without intermediaries or aggregators. A visit within the city takes up to 60 minutes, so you won't have to wait half a day. Direct service means the same person who performed the diagnostics and service is responsible for the result — you don't need to retell the breakdown story through another company's dispatcher. When choosing a Liebherr service in Astana, ask whether the technicians work with inverter compressors and BioFresh electronics — this determines whether the job will be completed right the first time. Also ask if they provide a warranty on parts: ours is one year for both labor and parts.

When a Liebherr refrigerator repair makes sense

Here are the key things a Liebherr refrigerator owner should know before calling a technician: from decoding an error code to choosing between repairing at home or at the service center.

  • Liebherr is not mass-market: the inverter compressor and BioFresh/NoFrost Plus electronics require a technician who knows the brand, not a generalist.
  • The error code is the first clue: decoding the code on the display narrows down the cause to a specific component or sensor and saves diagnostic time.
  • Typical breakdowns are predictable: refrigerant leaks, control board failure, defrost sensors, and Side-by-Side hinges are the most common reasons for calls.
  • More often at home: complex work on the circuit and board is done at the service center after inspection, while simple faults are fixed on site.
  • Diagnostics and warranty matter more than speed: free diagnostics and a warranty on labor and parts reduce the risk of needing to call the technician again.

90brands

Besides Liebherr, we repair other refrigerator brands in Astana

We work with every brand sold in Kazakhstan — from Samsung, LG and Atlant to Biryusa, Indesit, Stinol and rare imported makes. Can’t find yours in the list? Call anyway — a technician will come and take a look.

We also repairWe also repairTECH SERVICE08

Besides Liebherr refrigerator repair, we fix other equipment in Astana

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE09

Worth reading before Liebherr refrigerator repair in Astana

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp