Open until 19:00+7 (778) 046 88 00Call a technician
Tech Service technician next to a vacuum cleaner

Vacuum Cleaner Filters in Astana

Filter selection and replacement for your vacuum model. Free diagnostics, technician arrives within 60 minutes across the city.

  • A clogged filter is a common cause of weak suction.
  • The technician checks the filter, motor compartment, and seals.
  • The price is quoted after free diagnostics.

Our own technicians4 to 20 years of experience

Kairat A.Ruslan S.Nikita O.Kuanysh A.
ours5,06 127 reviews
order database

1 yearwarranty on labor and parts

60 minutestechnician arrival across the city

freediagnostics

What the job includesIncludesTECH SERVICE02

What vacuum filter replacement includes

The technician checks the filter and motor compartment, selects the part for your vacuum model, and replaces it. The price is quoted after free diagnostics, once it's clear whether only replacement is needed or cleaning as well.

Signs of a faultSigns of a faultTECH SERVICE03

Signs of a clogged filter

4

A clogged filter lets less air through, and the vacuum suctions worse. Often the owner notices this by the fine dust that has to be gone over twice.

  1. Filter sits loosely

    The seal doesn't fit snugly against the housing, dust is visible at the joint, and there's play.

  2. Dust flies back out

    Fine dust is blown out from the housing or the filter gap.

  3. Housing overheats

    The housing gets hotter than usual, and there's a smell of dust during operation.

  4. Noise has changed

    The sound has become higher or a whistling has appeared at the air outlet.

  5. Deposit on the exhaust grille

    Gray deposit on the exhaust grille and a smell when blowing out after cleaning soft surfaces.

The filter has darkened, is deformed, or the sealing frame doesn't fit against the housing.

Describe the symptoms
Parts and materialsPartsTECH SERVICE04

Original filter or aftermarket

Original and aftermarket filters are selected by part number or vacuum model. Price — after diagnostics: it depends on the model and filter type.

Original

Filter by part number

Selection
by part number or model
Fit
exact fit for the model's housing
What to check
part number and model
When chosen
if exact compatibility is needed

Aftermarket

Compatible filter

Selection
by vacuum model
Fit
checked on site
What to check
filter type and dimensions
When chosen
if a budget-friendly option is needed
PricesPricesTECH SERVICE05

How much does vacuum cleaner filter replacement cost in Astana

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Filter replacementfilter not included

1–2 hours

from1 500 ₸

Cord rewind mechanism repairparts not included

1–2 hours

from2 500 ₸

Motor brush replacementparts not included

1–2 days

from2 500 ₸

Vacuum cleaner disassembly and cleaningexact price — after the free diagnostics

1–2 hours

from3 000 ₸

Electrical circuit repairparts not included

1–3 hours

from3 000 ₸

Work before and afterBefore and afterTECH SERVICE06

Work before and after

Cracked filter frame

1–2 hourstime

from 1 500 ₸cost

Problem
After the vacuum cleaner fell, the plastic frame of the exhaust filter cracked, the filter stopped fitting snugly, and the vacuum cleaner blew out fine dust.
What we did
The technician in the workshop removed the compartment grille, took out the filter with the cracked frame, and installed a new filter.
Result
The technician checked that the air at the outlet is clean; 1-year warranty on the work and on the parts.
I want the same
In the workshop on a mat stands a dark blue vacuum cleaner with a hose, the filter compartment is open; the technician's hands are inserting a new white pleated filter, next to it lie the old filter and a broken piece of its frameBeforeAfter
01 / 02
All repairs

We reply during working hours

Request a filter replacement

Specify your vacuum model and a convenient time — the technician will bring the right filter and arrive with the needed part.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 046 88 00
Customer reviewsReviewsTECH SERVICE07

Customer reviews

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Мерей Р.Order No. AST-2512-571 · 25 April 2025

ours

Досым осы сервисті ұсынды, сеніммен келдім. Құрылғыны әкелдім, бірден қабылдады. Ризамын, рахмет.

Repair: vacuum cleaner repair in

Степан Я.Order No. 2407-6509 · 5 August 2024

ours

Зимой без техники никак, поэтому тянуть было нельзя. Жалоба одна: не всасывает. Стоит, работает, радует.

Repair: vacuum cleaner repair in

Валерий Д.Order No. TSA-98844 · 13 July 2024

ours

Живу в Есиле, искал сервис, чтобы не тащиться через весь город. С этим и пришёл: не всасывает. В техсервис попал случайно, возвращаться буду. Вернули — проверил, всё ок

Repair: vacuum cleaner repair in

Виолетта Д.Order No. TSA-61577 · 4 July 2024

ours

Смотрел, чтобы был свой склад запчастей, а не под заказ. Проверил всё, что мог: не всасывает. Пользуюсь и вспоминаю добрым словом.

Repair: vacuum cleaner repair in

Шолпан Ш.Order No. ZK-2023-183 · 13 November 2023

ours

Құрылғыны әкелдім, бірден қабылдады. Достарыма айтамын. Жұмыс істеп тұр, шағым жоқ.

Repair: vacuum cleaner repair in

Аркадий Я.Order No. 66709 · 18 August 2023

ours

Искал, кто работает в субботу, у нас с женой график сложный. Разозлился, конечно. Вещь не старая. Причина обращения — не всасывает. Смета — 18 500, чек дали. Сделали так, что и не придерёшься.

Repair: vacuum cleaner repair in

Иван Н.Order No. TSA-17234 · 6 November 2022

ours

Больше всего мешало: не включаеться. Дамир М принял без вопросов, хотя был без записи. Сделали так, что и не придерёшься.

Repair: vacuum cleaner repair in

Григорий И.Order No. ZK-2022-220 · 1 September 2022

ours

С чем обратился: шумит. Дома включил, всё на месте. Сейчас пашет без нареканий.

Repair: vacuum cleaner repair in

Алихан Ю.Order No. AS-9621 · 18 October 2018

ours

Әйелім «таста» деді, мен көрсетуді жөн көрдім. Жұмыс істеп тұр, шағым жоқ.

Repair: vacuum cleaner repair in

Софья Ц.Order No. AST-1709-195 · 26 May 2017

ours

Смотрел, чтобы был свой склад запчастей, а не под заказ. Основная жалоба — не включается. Работает, как будто и не ломалось)

Repair: vacuum cleaner repair in
See all reviews

Our technicians in Astana

01 / 08
Kairat A., senior small appliance technicianexperience14 years

Kairat A.

Senior small appliance technician

Ruslan S., on-site coffee machine diagnostics technicianexperience15 years

Ruslan S.

On-site coffee machine diagnostics technician

Nikita O., coffee machine cleaning technicianexperience5 years

Nikita O.

Coffee machine cleaning technician

Kuanysh A., coffee machine diagnostics technicianexperience12 years

Kuanysh A.

Coffee machine diagnostics technician

Aydar A., portafilter coffee machine technicianexperience5 years

Aydar A.

Portafilter coffee machine technician

Serikbay A., vacuum cleaner repair technicianexperience12 years

Serikbay A.

Vacuum cleaner repair technician

Artur G., vacuum cleaner repair technicianexperience15 years

Artur G.

Vacuum cleaner repair technician

Akzhol K., washing machine repair technicianexperience18 years

Akzhol K.

Washing machine repair technician

Questions and answersQuestionsTECH SERVICE08

Questions about vacuum cleaner repair

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Why shouldn't you wash a HEPA filter?

When HEPA filter fibers get wet, they clump together and stop trapping fine dust, so after washing it no longer cleans the air like it used to. This kind of filter is replaced, not washed, even if it looks intact.

How is a HEPA filter different from a regular one?

HEPA traps the tiniest particles, including allergens, while a regular foam filter mostly catches large dust. HEPA can't be washed and needs to be replaced more often, but it protects the motor and the air in the room better.

Can a clogged filter cause the vacuum motor to break down?

Yes, a clogged filter blocks airflow, the motor overheats and wears out faster. If you put off replacing it, it can lead to motor repair, so the filter should be changed on time.

Can you put a filter from a different vacuum model in?

Usually not: filters differ in size and mounting, and the wrong one doesn't fit tightly, letting dust slip past. It's best to pick the part by vacuum model or part number, depending on the model.

The vacuum started smelling of dust while running, is it because of the filter?

Often yes: a clogged filter traps dirt, it gets musty, and a dusty smell appears. But the cause can also be debris in the hose or container, so it's best to have a technician look at the vacuum during free diagnostics.

How can you tell the vacuum filter is clogged if it looks fine on the outside?

Shine a flashlight through it: a clogged filter barely lets light through, and it feels dense and dusty to the touch. Another sign is weak suction and an overheating body, but a technician will give a more accurate answer during diagnostics.

Repair guideArticleTECH SERVICE09

Vacuum cleaner filters in Astana with at-home replacement by Tech Service

Kairat A., senior small appliance technician

Author: Kairat A.,Senior small appliance technician

Published
Updated

Tech Service selects and replaces vacuum cleaner filters in Astana with a technician visiting your home within 60 minutes. Diagnostics are free, there is a 1-year warranty on labor and parts, and technicians have 4 to 20 years of experience. The technician gives you the price after diagnostics, and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies.

How to tell it's time to replace the vacuum cleaner filter

A consumable rarely shows wear on the outside. Here's what signs technicians use to determine it's time for a replacement, and why you shouldn't put it off.

Signs that the filter is clogged

  • Loss of suction power: the vacuum stops picking up large debris from the carpet and leaves streaks of sand on hard floors.
  • Dusty smell during operation: a musty odor comes from the body — trapped particles settle in the fibers and release the smell back into the room.
  • Suction doesn't return after emptying the container: you emptied the bin but the power stayed the same — meaning the filter unit itself is clogged.
  • Increased noise and body heating: the motor lacks air, RPMs rise, and the body gets hotter than usual.
  • Gray edge when held up to light: hold the HEPA filter against a lamp — a dense dark border along the edge means particles have penetrated deep inside.

Why a clogged filter is dangerous for the motor

During our diagnostics, a clogged filter regularly turns out to be the cause of motor overload: air doesn't pass through the fibers, the motor runs under increased load and heats up. Some particles bypass the barrier and settle on the winding and impeller — hence the drop in RPMs and the characteristic hum. When visiting, a Tech Service technician opens the body and checks the entire unit, not just replaces the consumable, because a clogged element often masks already-started motor wear. Experience shows: the longer you ignore the symptom, the longer the list of related work when opening the unit. Our diagnostics are free, and a technician arrives within 60 minutes anywhere in the city. If you delay replacement, the savings turn into motor repair, which is a different category of work and different timelines.

Types of filters and how to choose the right one for your model

We break down the types of replacement elements for vacuum cleaners and explain why selection is based on the mounting slot and device markings, not on guessing by appearance.

Filter types and their differences

TypeWhat it capturesCan it be washedSelection
HEPAfine dust and allergensno in most devicesfor a specific model
Fine filtrationlarger particlesdepends on the designby mounting slot
Washablelarge debris and pet hairyes, rinse with waterby slot size
Originalas intended by the deviceper regulationsfor one model
Universalbasic dust particlesdepends on materialonly if size matches exactly

Why the element is selected by mounting slot

We select the part by the vacuum cleaner's markings and brand and by the mounting slot — lines from Samsung, LG, Bosch, Xiaomi, and other manufacturers differ in size and attachment type. Even within one brand, the slot changes from series to series: the frame, latches, and seal thickness are not interchangeable between neighboring devices. A universal product fits another slot only if the dimensions match exactly; otherwise, a gap remains along the edge. You can't trim or bend the element to size: a loose fit lets dust bypass the filter, and it stops protecting the motor. Before ordering a vacuum cleaner consumable, check the number on the body's nameplate and the slot shape — this way the technician brings a part that fits without gaps on the first try, and the 1-year warranty on labor and parts applies from the moment of installation. If you're unsure about the choice, you can order a vacuum cleaner filter by model number — the technician will verify the markings and bring the right element.

How often to change the filter and whether you can wash HEPA

The frequency depends on the type of consumable and how often you clean. We explain when washing actually helps and when replacement is the only working option.

Replacement frequency under different loads

  • Daily cleaning: check the replaceable element every two to three weeks, and weekly if you have pets, because pet hair clogs the cells faster than dust.
  • Cleaning once a week: inspecting once every one to two months is enough, and replacement is based on a drop in suction power, not on the calendar.
  • Wet-dry vacuum: rinse the compartment after each wet cleaning, but change the consumable itself when the housing becomes cloudy or a persistent odor appears.
  • Unit older than five years: if suction drops even after cleaning, it's time to replace the part — worn fibers don't recover.
  • Models with a turbo brush: a clogged element makes itself known by a whistle at high speeds before a noticeable drop in suction.

Can you wash a HEPA filter and put it back

In most models, a HEPA filter requires replacement rather than washing — when exposed to water, the fibers lose their structure and trap dust less effectively. The part may look intact, but fine particles start passing through and settling on the vacuum motor. A washable version should be rinsed strictly according to the model's instructions and fully dried before installation, otherwise moisture gets into the motor. Do not dry it on a radiator or with a hair dryer — hot air warps the plastic housing, and the seat no longer holds the part. On models with two stages of cleaning, washing the first stage is acceptable, but the fine filter is replaced. If after washing and complete drying the suction hasn't returned to its previous level, the issue isn't moisture but damaged fibers — then the consumable needs replacement.

If the vacuum still has weak suction after replacing the filter

A new part doesn't always restore suction: the cause of weak airflow may lie elsewhere. We explain what a technician checks before replacing the consumable.

What else can cause weak suction

Weak suction can be caused not only by a clogged membrane but also by a clogged hose, worn turbine, or a faulty motor. The corrugated hose of a vacuum accumulates dust, hair, and small debris at the bends — the passage narrows, and airflow drops even with a clean consumable. The turbine impeller loses speed over time due to bearing wear, and then the unit hums louder but sucks noticeably weaker. The power unit, when overheated or with worn brushes, runs intermittently, loses power, and shuts off after a few minutes. The foam seal on the dust container lid dries out and lets air bypass the chamber — suction drops for no apparent reason. A clogged dust bag and an overfilled container produce the same effect: air has nowhere to go, and the motor runs idle. Therefore, replacement without checking other components doesn't guarantee results — you first need to find the real cause, otherwise the consumable is replaced in vain.

What free diagnostics includes

Our diagnostics are free: the technician checks the consumable, suction, hose, and motor, and based on the results tells you whether only replacement is needed or a component repair. A Tech Service specialist measures suction at the inlet, inspects the corrugated hose against the light, listens to the impeller, and tests the power unit under load. The fit of the part in its seat is checked separately: misalignment or a loose installation disrupts airflow no worse than a clogged membrane. A technician arrives within 60 minutes anywhere in the city, and there is a 1-year warranty on labor and parts. We accept payment via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies, and the technician provides the cost after inspection. This approach sets a service center apart from a parts store: there they sell you a part, while here we first find out whether it will help.

How filter replacement with a technician visit in Astana works

We explain how the service works from the first request to checking the result: specialist visit, on-site diagnostics, selecting the part for your model, replacement, and warranty on the work performed.

How the technician visit works

We come to your home within 60 minutes anywhere in the city: a technician runs free diagnostics, picks the right part for your vacuum model, and replaces it on the spot. You can request a visit by phone or in chat—just tell us the brand and the symptoms, like weak suction, odor, or a whistling sound during use. At your address, the technician opens the housing and checks the mounting seat, the condition of the part, and the surrounding seals. If the needed part isn't on hand, they note the exact specs and bring it on a follow-up visit. The job takes less time than a trip to the service center and back. If diagnostics show the issue isn't the part, the technician tells you right away what else needs to be done—so you don't have to haul the vacuum to the service center and back.

Warranty and terms of service

We provide a 1-year warranty on labor and parts, and our technicians—with 4 to 20 years of experience—work directly with you, no middlemen. The same technician who comes to your call is responsible for vacuum filters in Astana: they run diagnostics and install the part. The price is quoted after free diagnostics, once it's clear which part is needed and what work is involved; you can pay via Kaspi QR, Kaspi Red, card, cash or bank transfer. The warranty covers both the part itself and the quality of installation—if you contact us again for the same issue, there's no extra call-out fee. In our experience, a common cause of repeat requests is a part chosen by appearance rather than by mounting seat, so we verify the specs before installation.

Caring for vacuum cleaner filters

Here are the key things to keep in mind when replacing a vacuum part—from the first signs of wear to situations where the problem isn't the part itself.

  • Signs of wear: loss of suction, a dusty smell from the exhaust, and visible buildup on the part's housing are signals it's time to replace it.
  • Motor load: a clogged part makes the motor work under overload, so don't put off replacement.
  • Choosing the part: pick a consumable by mounting seat and device model—don't trim it to size, or it won't hold dust.
  • HEPA filters: these are usually replaced rather than washed—after washing, the fibers lose density.
  • If suction doesn't return: the cause is in another component—the hose, turbine, or corrugated tube—and that calls for diagnostics.
BlogBlogTECH SERVICE10

Useful articles

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp