Геннадий Ж.Order No. 2601-4185 · 28 October 2026
oursПозвонил в четыре места, тут ответили по-человечески. Открыл — и сразу понял: не морозит. Замена: компрессор. Сравнивал — здесь дешевле. Ни шума, ни запаха, всё штатно.
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 746 00 26Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician will arrive within 60 minutes. Diagnostics are free.
Our own technicians4 to 20 years of experience




Repair prices
Below are typical symptoms and their likely causes. The technician will pinpoint the exact cause during diagnostics.
Refrigerant leak, compressor failure
from5 000 ₸
Clogged drain, worn seal
from4 500 ₸
Compressor wear, vibration
from16 000 ₸
No power, burnt control board
from10 500 ₸
Defrost sensor, clogged capillary
from5 500 ₸
Refrigerant leak, compressor wear
from5 000 ₸
Code points to a component
from5 500 ₸
Clogged capillary, refrigerant leak
from5 000 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1 visittime
from 4 500 ₸cost

BeforeAfter5 steps

Five steps from request to performance check. Diagnostics are free.
Describe the symptom and your refrigerator model. The technician will confirm the visit time.
The technician arrives with tools and starts with an inspection.
The technician checks the components and identifies the cause.
You learn the cost of repair and parts. Work begins after approval.
The technician checks the refrigerator's operation. 1-year warranty on labor and parts.
We reply during working hours
Leave a request — the technician will arrange a convenient visit time and identify the fault after inspection.

Warranty question? Call us
+7 (778) 746 00 266 127 reviews of repairs at TECH SERVICE in total
Геннадий Ж.Order No. 2601-4185 · 28 October 2026
oursПозвонил в четыре места, тут ответили по-человечески. Открыл — и сразу понял: не морозит. Замена: компрессор. Сравнивал — здесь дешевле. Ни шума, ни запаха, всё штатно.
Лариса О.Order No. AST-2503-174 · 5 February 2025
oursИскал, кто работает в субботу, у нас с женой график сложный. С этим и пришёл: намерзает лёд. Вернули — проверил, всё ок!!
Борис В.Order No. 2502-4413 · 17 January 2025
oursЖалоба одна: шумит. Никита М сам позванил и сказал, что готово. Ни разу не пожалел.
Екатерина К.Order No. TSA-51912 · 4 November 2023
oursПроблема ровно одна: шумит. Дильмурат С отсоветовал дорогой ремонт, предложил простой. Проверил на всех режимах — держит)
Людмила Щ.Order No. 96289 · 14 July 2022
oursПричина обращения — не морозит. Никита М пообещал и сделал, без напоминаний. Сейчас пашет без нареканий
Любовь Ю.Order No. AST-2210-389 · 11 May 2022
oursБыло важно успеть до конца недели, а то морозы обещали. Привёз на диагностику: холодильник. С чем обратился: намерзает лёд. Никита М отсоветовал дорогой ремонт, предложил простой. По деньгам вышло ровно, без сюрпризов. Перезвонили на следующий день, уточнили детали. Пришлось ставить: модуль. Ни разу не пожалел.
Альбина Ю.Order No. AST-2001-960 · 27 April 2020
oursЗаявку оставил через сайт вечером, утром перезвонили. Думал, попал на дорогой ремонт. Симптом как на ладони: шумит. В другом месте просили на треть больше. Полёт нормальный.
Юрий М.Order No. AS-9458 · 7 May 2018
oursИскал, кто работает в субботу, у нас с женой график сложный. Заявку оставил на всякий случай, а зря время тянул. Первое, что заметил: шумит. Никита М сам позванил и сказал, что готово. Созвонились, уточнили модель, срозу сказали по запчасти. По факту меняли: модуль. Tech-service посоветовали в домовом чате. Пользуюсь и вспоминаю добрым словом.
Инна Н.Order No. 1709-5286 · 30 October 2017
oursСимптом как на ладони: шумит. Дильмурат С пообещал и сделал, без напоминаний. Работает, даже лучше прежнего.
Инна Н.Order No. AS-5681 · 20 August 2016
oursБольше всего мешало: намерзает лёд. Дильмурат С объяснял без умных слов, за это спасибо. Выбрал techservice, потому что близко к работе. Сейчас пашет без нареканий.
experience11 yearsDishwasher repair technician
experience10 yearsSenior washing machine technician
experience11 yearsStove and oven repair technician
experience11 yearsFreezer repair technician
experience16 yearsWashing machine installation technician
experience8 yearsDishwasher technician
experience12 yearsWashing machine repair technician
experience10 yearsWashing machine board repair technician
Didn’t find the answer? Message us on WhatsApp.
Ask a questionYou can submit a request at any convenient time, and a technician will come during business hours. In Astana, arrival takes about 60 minutes after the time is confirmed, and diagnostics are free.
The price depends on the model, type of refrigerant, and system volume, so the technician quotes it after free diagnostics. The work and materials are agreed with you in advance.
Doing it yourself is dangerous and requires special equipment, so it's better to leave it to a technician. A specialist will come to your home, find the leak, replace the filter drier, and refill the system to the correct level.
Yes, the technician fixes most Electrolux breakdowns on site: relays, thermostats, sensors, fans, boards, and leaks are repaired at home. The appliance is taken to the service center only in certain cases, depending on the model and component.
Most often the start relay is to blame: it clicks trying to start the motor but can't. Less often the compressor itself is the issue; an at-home diagnostic will pinpoint it, depending on the model.
A slight hum is normal, but a sharp increase in noise, vibration, or clicking indicates a fault. It's better to have a specialist look at the appliance so the component doesn't need replacing.
Tech Service repairs Electrolux refrigerators in Astana as a direct service provider: our technician comes to your home or takes the appliance to our service center. Diagnostics are free, we arrive within 60 minutes anywhere in the city, and you get a 1-year warranty on labor and parts. The technician gives you the price after diagnostics.
An Electrolux refrigerator stops cooling for a few common reasons—from a sensor to the compressor. Let's break down what the indicator lights and error codes mean and how to tell from the symptom which component has failed.
A flashing temperature indicator on an Electrolux refrigerator is the control board signaling a fault in a specific component—a sensor, the defrost system, or the electronics—not a breakdown of the entire appliance. The board reads the temperature sensors in the fridge and freezer compartments, and when a value goes out of range, it triggers the flashing or shows a code on the display. An Electrolux error code encodes the zone and type of fault: certain combinations point to the evaporator sensor, a defrost failure, or an open circuit in the fan. Without a code, the technician can only tell there's a fault; with the code, they know the exact component. During diagnostics, we match the code against the code table for your model—different Electrolux series use different numbering. The error code narrows the search to one component, so the technician checks the right sensor immediately instead of testing the whole circuit—this saves time during the visit. If the indicator is confusing, Electrolux refrigerator repair in Astana starts with free diagnostics: the technician will match the code and tell you the cause.
If your Electrolux refrigerator isn't cooling but the light inside is on and you hear clicking from the unit without it starting, the technician first checks the start relay, then the compressor and thermostat. The light being on means power is reaching the appliance and the control board is working—so the cause is in the cooling circuit or the motor start circuit. The start relay sends a pulse to the compressor winding; when its contacts wear out, it clicks but doesn't start the motor. The compressor itself may be fine, and the thermostat may not be sending the turn-on command. The technician tests the relay, measures the resistance of the compressor windings, and checks the thermostat circuit. Clicking without starting is more often caused by a worn start relay than by the compressor itself, so don't assume an expensive repair right away—diagnostics will show the exact cause.
After defrosting, an Electrolux refrigerator may not get cold due to a faulty defrost sensor, timer, or refrigerant leak—not because of the defrosting itself. The defrost sensor controls the evaporator heater on and off; if it gives false readings, the defrost cycle doesn't finish and cooling doesn't resume. A faulty timer doesn't switch modes, so the compressor doesn't get the cooling command. A refrigerant leak shows up differently: the motor runs, the condenser on the back wall is only partially warm, and the evaporator gets uneven frost. The technician checks the sensor and timer circuit, inspects the evaporator and circuit for oil traces, and measures system pressure. If the compressor hums but there's no cold for more than a few hours after turning on, it's not a settings issue—wait for diagnostics and don't take the circuit apart yourself.
Electrolux has its own electronics, inverter compressors, and No Frost system. Here's which components fail most often and what the technician checks on-site.
We service compressors, including inverter types, thermostats, and control boards on Electrolux refrigerators, matching parts to the specific model. The inverter unit in these models runs off the control board and has no classic start relay — diagnostics begin with checking power circuits and sensor signals. The thermostat or temperature controller turns cooling on and off, and if it sticks, the compartment either runs continuously or stops completely. The electronics combine the controller, display, and wiring harnesses: oxidized contacts after a leak or power surge cause erratic errors. An inverter compressor adjusts power smoothly, without constant on-off cycling, so its hum doesn't always mean a breakdown — a technician distinguishes normal operating sound from a fault and won't replace a working unit.
Ice buildup in a No Frost Electrolux refrigerator usually points to a failed defrost heater, timer, or defrost sensor, not to incorrect settings. The No Frost system removes moisture through the defrost heater, timer, and defrost sensor, and if one of these elements fails, ice forms on the back wall — that's the first clue for a technician. The evaporator gets covered in frost, the air duct gets blocked, and cold stops reaching the compartment even though the compressor keeps running. The timer doesn't start the defrost cycle on schedule, the sensor reads too high, the heater burns out — each case shows its own pattern during testing. We check the defrost circuit element by element rather than replacing parts at random, so No Frost service doesn't cost extra parts. At the first signs of frost on the back wall, call a technician before the compartment fails completely.
| Component | Symptom it causes | What the technician checks | Repair type |
|---|---|---|---|
| Compressor | not cooling, humming | start-up and operation | on-site or at the service center |
| Thermostat | not holding temperature | activation | on-site |
| Start relay | clicking without starting | contact and wear | on-site |
| Temperature sensors | indicator flashing | readings and circuit | on-site |
| No Frost system | ice buildup | heater, timer, defrost sensor | on-site or at the service center |
| Seal and hinges | loose door seal | door fit | on-site |
Here's how a technician visit works step by step — from arrival to checking the result — and why some jobs are done on-site while others are done at the service center.
A Tech Service specialist arrives at your home within 60 minutes anywhere in the city and starts with free diagnostics of your Electrolux refrigerator on-site. The service covers all of Astana, including new residential complexes on the left bank and older neighborhoods on the right. On-site, the specialist checks what can be assessed without disassembling the circuit: compressor start-up, indicators, sensor operation, and door fit. Based on the inspection, they name the cause and scope of work, and quote the price after free diagnostics — before any work begins. The decision whether one visit is enough or the technician needs to take the refrigerator to the service center is made on the spot, so you don't have to guess whether it will be taken away or fixed in your apartment.
Some work we do on-site, while complex cases involving the circuit or electronics we take to the service center so we don't have to disassemble the refrigerator in the apartment. On-site we handle tasks that don't require deep disassembly: replacing the start relay, thermostat, sensors, checking wiring and door seal. If it's a refrigerant leak, compressor replacement, or circuit soldering, it's more convenient to service the appliance on-site with the equipment—there it's also easier to check tightness and pressure after the work. The client can leave the refrigerator at home or bring it to the service center, and the choice depends on the unit, not on the technician's convenience. Therefore, the decision is made after diagnostics, when the cause is already known, not over the phone.
Let's break down how free diagnostics, work approval, and payment work, and what parts we select for a specific Electrolux model—so the owner knows the entire service path in advance.
Diagnostics for an Electrolux refrigerator is free with us, and the technician gives the price after it, when the cause is clear. During the visit, the specialist checks the compressor, thermostat, sensors, and control board, measures the pressure in the circuit, and records which unit has failed. He announces the findings right away, not later in a message. Then comes work approval: the specialist explains what exactly needs to be replaced or restored and gives the amount before any intervention. At this point the client decides whether to proceed or first weigh the alternative. In my opinion, this step removes the owner's main worry: you don't have to pay blindly. Approval before work starts lets you calmly compare repairing the unit with replacing the appliance and avoid paying for work whose essence is unclear.
We select original or compatible parts for the Electrolux refrigerator model and explain the difference before installation. We verify the part number against the marking on the unit itself—it's more accurate than the series name in the documents. For the Swedish brand, common items are compressors, thermostats, defrost sensors, control modules, and the filter drier, which is replaced every time the circuit is opened. Original parts match factory specifications exactly; a compatible analog costs less and, with the right specs, performs just as well. A compatible part isn't always worse—it's important that its parameters match the unit, so the technician checks mounting dimensions, voltage, and performance, not just the model name. Before installation, ask which exact part number is being installed and why it fits—this keeps both the technician and the process accountable.
Kaspi QR, Kaspi Red, card, cash, or bank transfer and payment procedure. You can pay via Kaspi QR, Kaspi Red, bank card, cash or bank transfer for companies, and the client learns the final cost after free diagnostics and work approval. Cash, bank card, transfer—the owner chooses the payment method once the amount is agreed. Diagnostics remains free. The clear order of "diagnostics → approval → work" lets you know in advance what the client is paying for, with no hidden extra charges along the way. The amount quoted during approval stays the same as discussed before work started. Practical tip: record the agreed amount and list of work before starting—it's easier to verify the result and avoid disagreements. In our practice, this transparent scenario saves nerves on both sides—you see the logic of the calculation, and we don't waste time arguing after the work is done.
Warranty and who does the work decide where a fridge owner turns when the same fault comes back. Here's what a 1-year warranty on labor and parts covers and how a direct service with its own technician differs from an aggregator or a freelancer.
We give a 1-year warranty on labor and parts, so if the same unit fails again, the customer comes back to us instead of looking for a new technician. The year covers both components at once: the work performed and the part installed. If the same unit fails again, we fix the problem under the warranty on labor and parts. This matters especially for inverter compressors and control boards in Electrolux fridges, where a diagnostic mistake costs more than on mechanical parts. A warranty on labor and parts together means the technician is fully responsible for the result, rather than responsibility being split between the parts supplier and the technician.
Tech Service is a direct service: our own technician comes to the customer, not a middleman who passes the request to a third party. The same service takes the request and its specialist later opens the Electrolux fridge in the customer's kitchen. A middleman usually doesn't know who will show up or which parts will be installed, while an aggregator distributes orders among contractors, so quality depends on whoever happens to take the job. With us, the specialist is responsible for the whole cycle — from the initial inspection to installing the unit and providing warranty support after the work. A visit within the city takes up to 60 minutes, and the same specialist who handled the request by phone does the work on site. When the service itself does the job, responsibility for diagnostics, the part, and the warranty isn't spread among contractors: the customer talks to the person doing the work and makes claims to the right place.
Tech Service technicians have 4 to 20 years of experience, and before starting work we discuss the scope of the job with the customer. Branded appliances require understanding of the specific model line: No Frost models with inverter compressors have their own self-diagnostic algorithms and their own error codes on the display. A specialist with years of Electrolux experience can tell a sensor fault from a control board problem faster than a generalist, and is less likely to replace a working part blindly. On inverter models the cost of a mistake is higher: a wrong diagnosis leads to a repeat visit and an unnecessary part. Technician experience matters most on branded appliances, where electronics and inverter components require understanding of the specific model rather than a one-size-fits-all approach.
Here are the key things an Electrolux fridge owner should keep in mind before calling a technician: from decoding signals to who is responsible for the result.
90brands
We work with every brand sold in Kazakhstan — from Samsung, LG and Atlant to Biryusa, Indesit, Stinol and rare imported makes. Can’t find yours in the list? Call anyway — a technician will come and take a look.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
If your refrigerator isn't cooling but the light is on, the cause is usually one of the components in the cooling circuit: the compressor, thermostat…
10 December 2025 · 13 minutes read
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read












