Фёдор Б.Order No. ZK-2026-788 · 31 August 2026
oursС чем обратился: не греет. Радик Т не пропал после ремонта, помог с настройкой. Сделали так, что и не придерёшься.
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 096 59 61Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.
Our own technicians4 to 20 years of experience




Repair prices
Below are typical symptoms and likely causes. The technician will pinpoint the exact cause during free diagnostics.
plug, cord, thermal fuse
from3 500 ₸
heating element, thermostat, relay
from3 000 ₸
fan, bearing, mount
from3 000 ₸
motor, impeller
from3 000 ₸
motor, impeller
from3 000 ₸
control panel, ribbon cable
from3 500 ₸
seal, insulation
from6 000 ₸
carbon buildup, wiring
from4 000 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1–2 hourstime
from 4,000 ₸cost

BeforeAfter5 steps

Five steps from your call to checking the repair.
We note your model and symptoms and arrange a visit.
The technician arrives anywhere in the city within 60 minutes of your request.
The technician confirms your address, agrees on a visit time, and checks access to where the appliance is set up.
You approve the price, and the technician performs the work.
The technician hands the air fryer back to you and explains how to use it after the repair.
We reply during working hours
Leave a request — a technician will arrive within 60 minutes anywhere in the city. Diagnostics are free, with a 1-year warranty on labor and parts.

Warranty question? Call us
+7 (778) 096 59 616 127 reviews of repairs at TECH SERVICE in total
Фёдор Б.Order No. ZK-2026-788 · 31 August 2026
oursС чем обратился: не греет. Радик Т не пропал после ремонта, помог с настройкой. Сделали так, что и не придерёшься.
Оксана Т.Order No. TSA-37178 · 29 August 2026
oursВ Астане с сервисами беда, поэтому выбирал по отзывам. Оставил заявку на ремонт аэрогриля. С этим и пришёл: не крутится вентилятор. Радик Т подобрал аналог дешевле, не навязывал оригинал. Ни копейки больше обещанного. Ни разу не пожалел.
Лариса О.Order No. ZK-2026-169 · 26 August 2026
oursПроблема ровно одна: не греет. Дамир М пообещал и сделал, без напоминаний. Сейчас пашет без нареканий
Василий Е.Order No. AS-5254 · 8 May 2026
oursОсновная жалоба — не греет. Радик Т провозился, но сделал. Тихо, ровно, без сюрпризов.
Олег Х.Order No. TSA-17328 · 9 March 2026
oursБыло важно успеть до конца недели, а то морозы обещали. Разозлился, конечно. Вещь не старая. Первое, что заметил: не греет. Дамир М сам позванил и сказал, что готово. Вытащили и показали: двигатель. Диагностику провели при мне, ничего не унесли в подсобку. Цену держали до конца, молодцы. Работает, даже лучше прежнего.
Геннадий Ж.Order No. AS-4443 · 7 December 2025
oursИскал, кто работает в субботу, у нас с женой график сложный. После скачка напряжения — не крутится вентилятор. Перезвонили на следующий день, уточнили детали. Смета — 5 000, чек дали. Приговор — двигатель. Вернули — проверил, всё ок)
Екатерина К.Order No. 2406-6454 · 12 July 2024
oursВ Астане с сервисами беда, поэтому выбирал по отзывам. Уже представлял, как объясняю домашним, что техника всё. Причина обращения — не греет. Цену держали до конца, молодцы. Сказали, что позвонят, и действительно позвонили. Пользуюсь и вспоминаю добрым словом.
Пётр Ч.Order No. AST-2411-122 · 19 January 2024
oursПозвонил в четыре места, тут ответили по-человечески. Проблема ровно одна: не греет. Третий месяц — никаких проблем.
Маргарита П.Order No. ZK-2023-393 · 17 November 2023
oursЖиву в Есиле, искал сервис, чтобы не тащиться через весь город. Я обычно такое не пишу, но тут пусть будет. Причина обращения — не греет. Вышло из строя: двигатель. Не пришлось стоять в очереди, хотя народу было. Заплатил бы и больше, если честно. В Техсервис привёл знакомый, у него тут чинили. Тихо, ровно, без сюрпризов.
Денис Л.Order No. AST-2211-348 · 5 July 2022
oursЗаявку оставил через сайт вечером, утром перезвонили. Я обычно такое не пишу, но тут пусть будет. Причина обращения — не крутиться вентилятор. Сказали, что позвонят, и действительно позванили. Приговор — тэн. Заплатил бы и больше, если честно. Проверил на всех режимах — держит.
Людмила Щ.Order No. AS-6018 · 24 January 2021
oursЗнакомый мастер раньше здесь работал, дал номер. Расстроился сильнее, чем следовало. Больше всего мешало: не крутится вентилятор. Радик Т принял без вопросов, хотя был без записи. Внутри оказалось: двигатель. Посмотрели, назвали срок, уложились. Итог — 10 500 тенге, ничего сверху. Пять баллов. Третий месяц — никаких проблем)
Валентина Р.Order No. ZK-2021-544 · 11 January 2021
oursПозвонил в четыре места, тут ответили по-человечески. Позвонил насчёт аэрогриля. С чем обратился: не крутится вентилятор. Дамир М показал старую деталь, всё прозрачно. Созвонились, уточнили модель, сразу сказали по запчасти. 16 500, и гарантия в комплекте. После ремонта — как новое.
Вера Э.Order No. 2008-2485 · 11 October 2020
oursОсновная жалоба — не греет. Радик Т не пропал после ремонта, помог с настройкой. Проверил на всех режимах — держит.
Ярослав С.Order No. TSA-36929 · 5 August 2020
oursДамир М сам позванил и сказал, что готово. Замена: двигатель. Полёт нормальный.
Иван Н.Order No. AS-4745 · 24 July 2020
oursПервое, что заметил: не греет. Радик Т посмотрел и честно сказал: менять не надо. Пользуюсь и вспоминаю добрым словом.
Валентина Р.Order No. TSA-13966 · 15 July 2020
oursС чем обратился: не греет. Радик Т объяснял без умных слов, за это спасибо. Тихо, ровно, без сюрпризов.
Дархан А.Order No. ZK-2018-827 · 1 February 2018
oursҚыс қатты, техникасыз қиын, сондықтан тез жөндеу керек болды. Алдымен интернеттен қарадым, кейін осында келдім. Кешігу болды, бірақ ескертті
Зоя М.Order No. AS-2002 · 17 March 2017
oursВ Астане с сервисами беда, поэтому выбирал по отзывам. Думал, придётся ждать неделю. Первое, что заметил: не греет. Дамир М сам позвонил и сказал, что готово. Вышло около 11 000, точнее не считал. Техсервис в Астане, район Есиль, — вот туда и поехал. Работает, даже лучше прежнего.
Альбина Ю.Order No. AS-1217 · 23 February 2017
oursС чем обратился: не крутится вентилятор. Дамир М посмотрел и честно сказал: менять не надо. Ни шума, ни запаха, всё штатно.
Борис В.Order No. AST-1605-640 · 29 August 2016
oursВ Астане с сервисами беда, поэтому выбирал по отзывам. Больше всего мешало: не греет. Полёт нормальный.
experience14 yearsSenior small appliance technician
experience15 yearsOn-site coffee machine diagnostics technician
experience5 yearsCoffee machine cleaning technician
experience12 yearsCoffee machine diagnostics technician
experience5 yearsPortafilter coffee machine technician
experience12 yearsVacuum cleaner repair technician
experience15 yearsVacuum cleaner repair technician
experience18 yearsWashing machine repair technician
Didn’t find the answer? Message us on WhatsApp.
Ask a questionMost likely, the fan motor, its impeller, or the winding's power circuit has failed. The heating element still works, but without airflow the appliance overheats, so it's best not to use it until it's repaired.
If the coil doesn't heat at all and doesn't glow when inspected, the issue is usually the heating element; if heating is intermittent, the thermostat is suspected. The technician makes the final call after free diagnostics, since behavior varies by model.
Yes, we repair air fryers in Astana even after the factory warranty, and the appliance's age isn't a problem. We provide a 1-year warranty on labor and parts.
Note the code and the model: the same error means different things across brands, and the manual has the decoding. If the code reappears after a restart, you need a technician—a single code isn't enough for an accurate diagnosis.
Light smoke and odor on first use are common due to factory lubricant on the heating element and usually go away after warm-up. If the smoke doesn't stop or smells like plastic, it's better to unplug the appliance and have a technician look at it.
If the thermal fuse has tripped and the appliance shut off, turning it back on without fixing the cause of overheating can melt the housing or cause a fire. A technician will check why the protection tripped and replace the burnt-out component.
Tech Service repairs air fryers in Astana as a direct provider: our technician comes to your home within 60 minutes anywhere in the city or takes the appliance to our service center. Diagnostics are free, you get a 1-year warranty on labor and parts, and our technicians have 4 to 20 years of experience. We give you the price after diagnostics.
An air fryer fails in a few typical ways, and the symptom itself immediately narrows down the suspect components—from the heating element to the fan and thermostat.
When the fan spins but the air stays cold, we first check the heating element and its power circuit. The heating element is responsible for heating the air in the air fryer, and its break or short is the most common cause of this picture. Next to it are the thermostat and thermal fuse: the first opens the circuit on overheating, the second trips once and after tripping no longer passes current. Checking the power circuit shows whether voltage reaches the heating element or is lost at contacts and connectors. The difference between a burned-out heating element and a tripped thermal fuse is only visible with a continuity test, so replacing parts by eye often sends the unit back to service again—test both components with a multimeter before replacing a part. A continuity test immediately shows both a broken coil and the residual resistance of a working element, so blind part swapping is ruled out.
Self-shutdown is most often related to the thermostat or temperature sensor, which incorrectly read the heat and open the circuit. The thermostat controls the temperature and turns off the heat when the sensor reports exceeding the threshold; if the signal is distorted, the appliance shuts down prematurely. We also check the control board: burned traces and oxidized contacts give false shutdown commands. The connectors between the board and the heating unit are also in the spotlight—they loosen from vibration and heat. If the appliance turns off at the same temperature every time, it's almost always the sensor; if it happens at random moments, check the control board and contacts. Note at what setting and after how many minutes the shutdown occurs: this detail cuts troubleshooting time in half.
We associate smoke and the smell of plastic with overheating wiring or melted connectors, and a growing hum with wear of the fan motor. The fan ensures hot air circulation, and when its bearing wears out, the housing starts to hum and vibrate more than usual. Melted contacts and connectors, a burned power cord, and a door seal that has lost its elasticity give the same set of external signs—smell, smoke, whistling. A slight smell when you first turn on a new air fryer goes away on its own, but a recurring smell every time you start it is a reason not to heat it further and to show the appliance to a technician. Our advice: don't try to "burn off" the appliance at maximum—it accelerates wiring melting and increases the scope of work. Whistling or metal grinding from inside usually means the motor bushing is already worn and lubrication won't help.
The signal on the screen is not a verdict but a hint about which component to start diagnostics with. The interpretation depends on the model and control type: electronics and mechanical controls report a fault differently.
We use the signal on the display as a pointer to a group of components, and we confirm the exact cause by testing continuity and checking the power circuit. Behind a code like "E1" or "E3", different manufacturers hide different components: on one model it's a temperature sensor, on another it's an electronic module. So the technician first cross-checks the code with the model and control type, then checks the contacts, wiring harnesses, and sensor readings with a multimeter. Only after that does it become clear which component to replace — the thermostat, heating element, or a section of wiring. The same code on different models often means different things, so copying a decoding from the internet and replacing parts at random is a path to unnecessary costs. In our experience, half of the "complex" cases are resolved by checking contacts, not by replacing a component.
| Signal type | What it indicates | What the technician checks |
|---|---|---|
| Heating error | Heating element, thermal fuse | heating circuit and protection |
| Sensor error | temperature sensor | sensor readings and contacts |
| Timer error | electronic module, timer | module logic and buttons |
| Panel flashing | control panel, connectors | contacts and wiring harnesses |
| Device won't start | power supply, power circuit | plug, cord, connectors |
If the code returns after a reset and restart, we recommend not running the device in circles but calling a technician for diagnostics. A one-time failure can be due to a voltage spike or a loosely inserted plug — then a restart goes smoothly. But when a sensor or heating fault signal appears again, the issue is in a specific component: a blown thermal fuse, oxidized contacts, or drifted sensor readings. Repeated starts with such a signal stress the protection and wiring, so waiting for it to "go away on its own" makes the subsequent repair more expensive. We provide free diagnostics at your home: the technician records the code, checks the circuit, and names the cause before any work. If the signal repeats after a reset, don't delay the call — each new start stresses the protection and wiring, and the cause doesn't disappear. The technician will confirm the faulty component by testing continuity and explain exactly what needs replacing.
Some breakdowns are fixed on the spot, while others require disassembly and electronics testing in the workshop. Let's break down which issues are resolved at home, which are taken away, and how a home visit works.
At your home, we provide free diagnostics and replace accessible components — the heating element, thermostat, temperature sensor, fan, contacts, and connectors. The heating element is replaced when the coil is broken, when the appliance heats unevenly, or doesn't reach the set temperature. The fan is replaced if it hums, scrapes with its blades, or doesn't spin at all — without airflow, food cooks on top and stays raw inside. The thermostat and temperature sensor are responsible for shutting off during overheating, and replacing them restores proper operation. Contacts and connectors are checked for burning and poor terminal fit. The technician performs such air fryer repair in Astana on site if the component is accessible without disassembling the housing. If the air fryer behaves unstable after replacing a component, the specialist doesn't leave it "for later" but immediately checks the result with a test run — so you don't have to call them a second time.
We replace control boards and perform work that requires disassembling the case and checking the electronics at our service center, where our technician delivers the appliance. The control board is the brain of the device: it distributes power between the heater and the fan, reads sensor data, and displays codes on the screen. If it fails, the device may not turn on, may shut off spontaneously, or show an error on the panel. The power supply is checked separately—the stability of the entire circuit depends on it. In the workshop, it's easier to test the traces, inspect the solder joints, and confirm that the issue is indeed in the electronics and not in the wiring. The decision "on-site or at the service center" is made after diagnostics, not in advance, so the client doesn't pay for unnecessary transportation.
We send our specialist to your home within 60 minutes anywhere in the city; they perform free diagnostics and agree on the work before it starts. This timeframe is possible because our own employee travels to the address, not a courier intermediary who first picks up the appliance and only then passes it on for repair. On site, they inspect the device, check heating, airflow, and the control panel's response, and identify the cause and scope of work. Approval happens before any work begins—you know in advance which component is being replaced and why. A direct contractor means our technician arrives, not an intermediary, so one service center is responsible for the work and the warranty. We handle Almaty addresses in the order requests are received.
A few safe checks help rule out simple causes, but you shouldn't open the case—let's clarify where the do-it-yourself zone ends and when a technician is needed.
It's best not to open the case, because replacing the heating element, thermostat, and control board requires disassembly and testing the circuit under load. The heating element is responsible for heating the air, the thermostat monitors the temperature and turns off the heating when the set temperature is reached, and the control board connects them to the panel and timer. To reach any of these components, you need to disassemble the case and test the power circuit with a multimeter under load—without this, replacing a part blindly is pointless. Additionally, the thermal fuse, which breaks the circuit on overheating, and the terminal contacts are checked: oxidation there can give a false picture of a malfunction. In the city, technicians perform such work on-site or at the service center, depending on the component. Replacing a part yourself without testing the circuit often masks the real cause, and the appliance breaks down again after the "repair".
If the air doesn't heat at all, it's most likely the heating element or its circuit. If there is heat but the unit shuts off, it's more likely the thermostat or sensor. When the fan spins but the air stays cold, the search narrows to the heating element, its contacts, and the thermal fuse, which breaks the circuit on overheating. When the unit heats but turns off too early or won't hold temperature, the thermostat and temperature sensor are to blame—they control the heating and send the shut-off signal. The thermal fuse in this case is usually intact, so it's checked last. The opposite case—the device shows no signs of life and won't start—means the power circuit is checked first. The appliance's behavior can only narrow things down; the exact answer comes from testing the components, so don't buy a part before diagnostics.
There are no prices in this article—they're set by the inspection. Let's break down the logic: when the technician quotes a price, what affects the scope of work, and when repair is more cost-effective than buying a new appliance.
We quote a price after free diagnostics, once the cause and scope of work are clear—not before inspecting the appliance. First the technician checks the heating circuit, thermostat, and control board, then explains which component failed and how to fix it. Diagnostics are free, so the inspection doesn't add a separate line to the bill. Then comes approval: the client hears the cause, the list of work, and the final amount, and only then decides whether to proceed or decline. Work doesn't start without the client's consent. This order protects the client from surprises: first the cause and plan, then approval, and only then the work. If diagnostics reveal a second faulty component, we stop and get approval for the addition separately, rather than silently adding it to the bill.
| What happened | Likely scope of work | What's confirmed after diagnostics |
|---|---|---|
| Not heating | replace heating element or fuse | condition of heating circuit |
| Shuts off | replace thermostat or sensor | sensor readings |
| Won't turn on | check power and board | condition of connectors |
| Noisy | replace fan | motor wear |
| Error on display | repair board or sensor | signal type |
You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies, and the client decides "repair or replace" after diagnostics, once they know the cause and scope of work. Payment is made after the work is approved. Repair usually makes sense when it's a single component: replacing the heating element, thermostat, or fan gets the appliance working again. But if several key parts have failed at once—the heating block, board, and motor—the cost of work and parts adds up, and buying a new air fryer may be the smarter choice. The technician will tell you honestly before work begins, not after. We provide a 1-year warranty on labor and parts, so choosing repair doesn't mean you'll be back with the same breakdown a month later.
Warranty on labor and parts, and service after the manufacturer's warranty ends—two questions we hear most often before an order. Let's cover both: how long our one-year warranty lasts and why you don't necessarily need to replace the appliance.
We give a 1-year warranty on labor and parts, so we stand behind both the quality of our work and the part we install. If the appliance stops heating again after a heating element replacement, or the fan starts making noise a couple of months later, you come back to us for a warranty inspection instead of looking for a new technician. The warranty period is the same for any component — the heating element, the fan motor, or the control board replaced as a whole. If a replaced component fails, the customer doesn't buy the part again: we investigate the case, find the cause, and fix it within the year. In my view, it's the warranty on parts, not just on labor, that separates a proper service from one that swaps parts at random. Before handing over the appliance, ask which specific part was replaced — that makes it easier to prove the cause if you need to come back.
After the manufacturer's warranty ends, we service air fryers like any other appliance, and our work is again covered by a 1-year warranty. Many people put off calling, thinking that since the manufacturer no longer covers the appliance, it's cheaper to buy a new one. In practice, it's usually one worn-out component — a thermostat, a heating element, or a fan bearing — that gets replaced, and the appliance keeps working. Our diagnostics are free, so it makes sense to have the appliance checked even if it's getting on in years: the technician names the cause and the scope of work, and the decision is yours. In our experience, an appliance that has run for several years usually needs one part replaced, not a full overhaul. The end of the manufacturer's warranty doesn't mean it's time to replace the appliance: first find out which component has failed.
We service air fryers with mechanical controls, with electronics and a display, including models from Philips, Tefal, and Redmond. Mechanical versions with rotary knobs are found in budget and older lines, while electronic ones with a touch panel and screen are found in current families from the same manufacturers. The control type determines the diagnostic logic: in mechanical models, the regulator contacts and thermostat fail more often, while in electronic ones, it's the board and temperature sensors. We confirm the control type when you call, so the technician doesn't have to guess what they'll be dealing with on site. If you have a rare model or a non-standard panel, just give us the model number when you call — we'll know in advance what equipment is needed. For residents of the capital, there's another important point: our city call-out takes 60 minutes, so the inspection doesn't stretch into days of waiting.
Put together, the symptoms, codes, and stages of work add up to a short summary — what to keep in mind before and after calling a technician.
24brands
We source parts and repair air fryers from popular brands. Tell us your model and the technician will check compatibility.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
The easiest way to remove scale from a kettle is with citric acid: 1–2 tablespoons per liter of water, boil for 5–10 minutes, then drain and rinse.
17 March 2026 · 13 minutes read
If your laptop screen is broken, turn the device off first, don't press on the display, and check the picture through an external monitor.
12 March 2026 · 11 minutes read
Air conditioner errors are codes on the display or flashing indicators that show which component has failed.
5 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read












