Open until 19:00+7 (778) 746 00 26Call a technician
Tech Service technician next to a refrigerator

Hansa Refrigerator Repair in Astana

A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.

  • Arrival within 60 minutes
  • Free diagnostics
  • 1-year warranty

Our own technicians4 to 20 years of experience

Yerkimbek S.Vladimir V.Beknur D.Ozat K.

Repair prices

  • Diagnostics0 ₸
  • Filter drier replacementfrom3 000 ₸
  • Drain line cleaningfrom4 500 ₸
  • Door rehanging / adjustmentfrom4 500 ₸
  • Leak detection and repairfrom5 000 ₸
All prices
ours5,06 127 reviews
order database
Common faultsCommon faultsTECH SERVICE02

Common Hansa refrigerator faults in Astana

Symptoms are grouped by component — pick the one that matches your case.

PricesPricesTECH SERVICE03

How much Hansa refrigerator repair costs in Astana

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Filter drier replacementrefrigerant not included

1–2 hours

from3 000 ₸

Drain line cleaninglabour only

1–2 hours

from4 500 ₸

Door rehanging / adjustmentlabour only

1–2 hours

from4 500 ₸

Leak detection and repairrefrigerant not included

1–3 hours

from5 000 ₸

Door seal replacementparts not included

1–2 hours

from5 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Hansa refrigerator repair in Astana

Temperature does not hold due to thermostat

1 visittime

from 6,000 ₸cost

Problem
The Hansa refrigerator either over-froze food or warmed up: the compressor did not turn off on time due to a faulty thermostat.
What we did
The technician opened the thermostat housing in the chamber, replaced the thermostat, connected the wires, and checked the compressor turning on and off.
Result
The temperature holds, and the compressor turns on and off on time. 1-year warranty on labor and parts.
I want the same
An open white refrigerator with glass shelves in a kitchen with cream-colored cabinets; a technician in an orange shirt holds a new thermostat at the open door, with the wire running into the wall of the chamber.BeforeAfter
01 / 04
All repairs
TECH SERVICE mobile technician with a tool case

How Hansa refrigerator repair works at your home in Astana

From request to performance check — five steps.

  1. Requestsame day

    Submit a request and a technician will arrive within 60 minutes anywhere in the city.

  2. Diagnosticsfree

    The technician agrees on the time and records the list of components to check.

  3. Approvalafter inspection

    You approve the scope of work and the part.

  4. Repairafter approval

    The technician performs the work and checks the refrigerator.

  5. Order completionafter check

    We check the refrigerator together with you and hand over the paperwork.

Leave a request

We reply during working hours

Book Hansa refrigerator repair in Astana

Describe the symptom in the form or by phone and choose a convenient time for the technician to visit. Diagnostics are free, 1-year warranty on labor and parts.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 746 00 26
Customer reviewsReviewsTECH SERVICE05

Reviews of Hansa refrigerator repair in Astana

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Валентина Р.Order No. AS-6222 · 15 September 2025

ours

Знакомый мастер раньше здесь работал, дал номер. Жалко было, подарок всё-таки. Жалоба одна: течёт. Никита М — мастер от бога, если можно так сказать. Отдал 19 000 и не жалею. Вернули — проверил, всё ок.

Repair: refrigerator repair in

Валерия А.Order No. AST-2312-338 · 25 September 2023

ours

Друг из Сарыарки посоветовал это место. Записался на ремонт холодильника. Проблема ровно одна: течёт. Никита М подобрал аналог дешевле, не навязывал оригинал. Пришлось ставить: модуль. Сказали 25 000 по телефону, столько и вышло. На ресепшене оформили за пару минут, выдали квитанцию. Дома включил, всё на месте.

Repair: refrigerator repair in

Василий Е.Order No. 2305-7586 · 14 February 2023

ours

Основная жалоба — течёт. Дильмурат С разрулил всё быстро. Ни шума, ни запаха, всё штатно.

Repair: refrigerator repair in

Денис Л.Order No. 1905-8876 · 13 February 2019

ours

Сосед по площадке хвалил, решил проверить. Больше всего мешало: не морозит. Работает, как будто и не ломалось.

Repair: refrigerator repair in

Екатерина К.Order No. ZK-2018-608 · 13 November 2018

ours

Техника на балансе ТОО, нужен был чек и акт. Симптом как на ладони: шумит. Проверил на всех режимах — держит.

Repair: refrigerator repair in

Леонид П.Order No. AS-4872 · 1 August 2018

ours

Техника на балансе ТОО, нужен был чек и акт. Причина обращения — течёт. Третий месяц — никаких проблем.

Repair: refrigerator repair in

Сымбат Х.Order No. AS-6261 · 1 May 2018

ours

Мастер бірден қарап шықты. Диагностика тегін болды. Рахмет, ұсынамын. Достарыма айтамын.

Repair: refrigerator repair in

Леонид П.Order No. TSA-62458 · 27 March 2018

ours

Жалоба одна: шумит. Никита М сам позванил и сказал, что готово. Дома включил, всё на месте.

Repair: refrigerator repair in

Григорий И.Order No. 12682 · 25 September 2016

ours

Переезжали в новую квартиру, техника после перевозки захандрила. Жалоба одна: течёт. Дома включил, всё на месте.

Repair: refrigerator repair in

Каусар Ф.Order No. TSA-72741 · 16 January 2016

ours

Мастер бірден қарап шықты. Бөлшек қоймада бар екен, күтпедік. Рахмет, ұсынамын

Repair: refrigerator repair in
See all reviews

Our technicians in Astana

01 / 08
Vladimir V., senior washing machine technicianexperience10 years

Vladimir V.

Senior washing machine technician

Beknur D., stove and oven repair technicianexperience11 years

Beknur D.

Stove and oven repair technician

Ozat K., freezer repair technicianexperience11 years

Ozat K.

Freezer repair technician

Adilkhan N., washing machine installation technicianexperience16 years

Adilkhan N.

Washing machine installation technician

Daulet D., dishwasher technicianexperience8 years

Daulet D.

Dishwasher technician

Temirlan B., washing machine repair technicianexperience12 years

Temirlan B.

Washing machine repair technician

Miras O., washing machine board repair technicianexperience10 years

Miras O.

Washing machine board repair technician

Questions and answersQuestionsTECH SERVICE06

Questions about Hansa refrigerator repair in Astana

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Why does my Hansa fridge click and not start?

The clicking usually comes from the start relay trying to kick the compressor on, but it can't due to wear or seizing. Less often the issue is the compressor itself or the wiring. A technician will check the relay and compressor on site.

How can I tell if my Hansa fridge has a refrigerant leak rather than a faulty thermostat?

With a leak, the fridge hums and runs nonstop but the compartments don't get cold, and there may be frost on the evaporator or pipes. With a faulty thermostat, the compressor either won't start or won't shut off on time. A technician can tell the difference during diagnostics.

Can the Hansa control board be repaired, or is it replaced entirely?

It depends on the model and the type of fault: sometimes the board is repaired, sometimes it's replaced with a new one. A technician opens the unit, checks the components, and offers the option that will keep your Hansa fridge running longer.

What's included in the free diagnostics for a Hansa fridge?

A technician inspects the appliance, checks the compressor, relay, thermostat, sensors, and defrost system, and looks for a refrigerant leak if needed. Afterward, they explain the cause and the cost of work, and you decide whether to go ahead with the repair.

Do technicians repair old Hansa fridges?

Yes, technicians repair Hansa fridges of various ages, including older models. Before starting work, they run diagnostics and assess whether the unit can be restored or is better replaced with a new one.

What should I do if ice builds up in the freezer of my Hansa fridge?

First, defrost the fridge completely and turn it back on. If ice appears again, the defrost sensor, timer, or heating element is likely faulty, and diagnostics are needed. A technician will check the defrost system and fix the cause.

Repair guideArticleTECH SERVICE07

Hansa Refrigerator Repair in Astana by Tech Service Technicians

Yerkimbek S., dishwasher repair technician

Author: Yerkimbek S.,Dishwasher repair technician

Published
Updated

Tech Service repairs Hansa refrigerators in Astana with its own technicians who have 4 to 20 years of experience. A technician arrives at your home within 60 minutes anywhere in the city, diagnostics are free, and we provide a 1-year warranty on labor and parts. We quote the price after diagnostics and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies.

What the Flashing Indicator and Hansa Error Codes Mean

The Hansa panel and the appliance's behavior themselves hint at where to look for the cause. Let's break down what the indicators mean and the typical symptoms before the technician arrives.

Why a Hansa Refrigerator Doesn't Cool but the Light Is On

If the light is on but there's no cold, the appliance is receiving power, and the cause is almost always in the cooling circuit or the compressor, not the electricals. The compressor may hum without effect or be silent, while the evaporator stays warm and the temperature in the compartments rises quickly. In this situation, the thermostat doesn't send a start command, and sometimes keeps the compressor running nonstop. A refrigerant leak in the foamed part or at the pipe joints shows up gradually: first, food thaws in the upper compartment, then there's no cold at all. Separately, check whether the fan in No Frost models is spinning — its stop gives a similar picture without an obvious compressor failure. If the appliance doesn't cool but the light is on, Hansa refrigerator repair in Astana begins with checking the cooling circuit and compressor. Before the technician arrives, don't fully defrost the compartments and don't move the appliance — this way it's easier to preserve the picture of the failure and pinpoint the leak more accurately.

Decoding Hansa Indicators and Error Codes

  • Alarm indicator: flashes when the compartment is warmer than normal for longer than a set time — after loading warm food or a door not closed tightly.
  • Flashing after defrosting: stays on until the appliance reaches operating temperature; if it doesn't go off within a day, look for a refrigerant leak.
  • Constant signal without cold: points to the compressor, start relay, or control board, which is checked by continuity testing.
  • No panel response: with the light on, indicates a control board fault, not a failure of the cooling itself.
  • Recording the sequence: note which indicators flash and in what order — this saves diagnostic time and helps the technician bring the right part.

Clicking, Humming, and Not Turning Off — What It Indicates

SymptomProbable causeWhat the technician does
Clicks and won't startStart protection relay, compressorTests the relay with a multimeter, checks the windings
Hums continuously, won't turn offThermostat, temperature sensorChecks the thermostat circuit
Ice builds up on the back wallNo Frost system, defrostInspects the heater and timer
Door doesn't hold the coldGasket, sealChecks the fit around the perimeter
Won't start after defrostingCompressor protection, relayLets it sit, then tests the circuit with a multimeter

What Types of Hansa Refrigerators Exist and What Breaks in Each Line

The design of a refrigerator depends on the line, and the line also determines which components fail more often. Let's go over the main configurations and their weak points — this helps you understand in advance what to look for when a breakdown occurs.

Models with Bottom and Top Freezer

In Hansa refrigerators with a bottom freezer, cold flows upward from the freezer, so if refrigerant leaks, the top compartment warms up first. In models with a top freezer, the opposite happens. In two-compartment designs, the evaporator is connected to both compartments through the cooling circuit, and the location of the leak shows up in the compartment temperatures: bottom-freezer models affect the refrigerator section, while top-freezer models affect the opposite. The difference is also noticeable in maintenance: in models with a bottom freezer, the condenser and compressor are often hidden behind the rear panel, while in the classic layout, access to the motor-compressor is easier. By which compartment warms up first, the technician can understand where to look for the leak even before disassembly — this speeds up diagnostics and reduces the amount of disassembly. If you need Hansa refrigerator repair in Astana, the technician will determine the cause based on the nature of the breakdown and choose the appropriate repair method.

No Frost vs. drip defrost — different repair logic

In Hansa models with No Frost, ice buildup is controlled by the heating element, timer, and defrost sensor, while in drip models, ice is more often related to the door seal and thermostat. The No Frost system circulates air with a fan through the evaporator, and a failure of any defrost cycle component produces a characteristic picture: frost buildup on the evaporator, weak cooling, sometimes water at the bottom of the compartment. Drip defrost works differently — moisture flows down a groove into the drain, and if it's clogged or the door seal doesn't fit tightly, ice and a puddle under the drawers appear. In such models, the thermostat directly controls the compressor, so if it sticks, the motor runs continuously. If frost builds up in a No Frost model with a working compressor, look for a fault in the defrost cycle, not in the cooling circuit — these are different repairs and different parts.

Built-in models and Hansa repairability

We service built-in Hansa refrigerators on site, but access to components is more difficult, so our technician first assesses whether the unit can be removed from the niche without damaging the furniture. The body is attached to the facade and cabinet, the compressor and condenser are often covered by panels, and the ventilation gap is limited — all this lengthens preparation for work on the motor-compressor and circuit. Repairability depends on how easily the unit comes out of the niche: in some models, it's enough to remove the facade and move the cabinet, while others require partial disassembly of the body. If a built-in model cannot be carefully removed from the cabinet, we move some of the work to the service center — this way the furniture stays intact and servicing doesn't stretch out with extra disassembly.

How Hansa refrigerator repair at home works

Our work follows a clear order — from request and free diagnostics to warranty. Let's go through each stage and what it includes.

Request, technician visit, and free diagnostics

We take your request and send our technician to your home; travel across the city takes up to 60 minutes, and diagnostics are free. A Tech Service specialist comes to you, not an intermediary: they inspect the unit, find the cause, and suggest a solution. During the inspection, the thermostat, start relay, compressor, and control board are checked; the technician listens to how the motor runs and assesses the condition of the door seal and door alignment. In Astana, visits are organized to all districts, so you don't need to take the appliance to a workshop yourself or look for movers. For diagnostics, describe in advance what symbols the panel shows and how the refrigerator behaves — the specialist will come with the right tools and get to the cause faster. The more accurately you describe the symptoms, the less time it takes to find the fault and the less often a component has to be disassembled again.

Cost approval and on-site work

The technician gives you the price after a free diagnostics, and only starts work once you approve it — at your home or at the service center if it can't be fixed on site. You know in advance what will be done, and the decision is yours: from replacing a relay to repairing the control board. Some faults are fixed right in your kitchen — the start relay, thermostat, door seal, defrost sensor, electronics. Complex cases involving the compressor or a sealed circuit are taken to the service center, where the circuit is checked for leaks and charged with refrigerant by weight. You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. If the fridge stops cooling again after the repair, don't wait — let us know right away; a follow-up visit under warranty will show whether it was an incomplete job or a new issue. Staying silent only muddies the picture: fresh symptoms point to the source of the problem more accurately than a week-old memory.

1-year warranty on labor and parts

  • Technician's work: one-year warranty on the performed operations — from relay replacement to board repair and circuit charging.
  • Parts: installed parts carry the same 1-year warranty as the labor.
  • Repeat visit: if a fault is due to our work, the technician comes back and fixes it at no extra charge.
  • What we need from you: tell us which part was replaced and what symptoms you're seeing — this speeds up the follow-up diagnostics.
  • After-repair check: make sure the appliance gets cold and cycles off before the technician leaves.

Which Hansa components we repair and replace

Like any brand, Hansa refrigerators have components that fail more often than others. Here's what we restore and how it's done in practice.

Compressor, relay, and refrigerant charging by weight

If there's a leak, we locate it with a pressure test, vacuum the circuit, and charge R600a or R134a refrigerant strictly by weight; if the compressor is worn out, we install a new one along with a filter drier. Nitrogen pressure testing shows exactly where the circuit is leaking — in the foamed section, at a pipe joint, or at the evaporator. After fixing the leak, the circuit is vacuumed to remove moisture and air, and only then is refrigerant added by weight according to the model's nameplate. We check the start relay separately: if it fails, the motor hums but won't start, and replacing the part restores starting without touching the circuit. Refrigerant doesn't get used up on its own — if it's low, there's a leak, and a simple top-up without finding the cause will bring the problem back later.

Control board, thermostat, and electronics

We first check the Hansa control board for repairability and only install a new one when it can't be restored; the thermostat and sensors are replaced only after a confirmed failure. The electronics control the fridge's modes and indicators, so diagnostics start with voltage measurements and circuit continuity checks, not with random part swapping. The thermostat turns the compressor on based on the chamber temperature, the temperature sensor sends readings to the board, and the wiring connects it all into one circuit. A broken or oxidized contact gives the same symptom as a failed board, so we check the whole chain. Don't rush to replace the electronics because of a single blinking indicator — often the sensor or wiring is to blame, and a new board isn't needed at all.

Door, seal, and defrost system

ComponentSign of wearWhat we do
Door sealIce buildup around the perimeter, door doesn't close tightInstall a new seal
Hinges and bushingsDoor sags, rubs against the bodyAdjust hinges, replace bushings
Defrost heaterIce buildup on the evaporatorReplace the heating element
TimerDefrost cycle doesn't startInstall a new timer
SensorDefrost is off, ice keeps growingReplace the sensor

When repairing a Hansa refrigerator isn't worth it

Restoring a unit isn't always worth it, and it's fair to say so upfront. Here are two cases where we advise against putting money into a repair and suggest putting it toward a new appliance instead.

Foamed-in section and multiple leaks

If the leak is in the foamed-in part of the cabinet or there are several at once, we say so directly after diagnostics and don't push work that won't pay off. Pressure testing the circuit shows exactly where refrigerant is escaping: in an accessible line, at joints, or in the hidden polyurethane foam layer. The first two spots can be fixed locally — the technician reaches them without taking the cabinet apart. A hidden cavity requires opening the insulation, replacing a section of tubing, and refilling, and the tightness of the restored assembly remains questionable. With two or more independent leaks, the pattern repeats: each new spot means another teardown, and labor costs add up. What's more, the foamed-in section isn't a separate part — you can't swap it out from a catalog like a relay or thermostat. In my view, in such a situation it's more important to understand how long the rest of the appliance will last — sometimes replacing it with a new one makes more sense than fighting recurring leaks. We show the pressure test results and explain exactly what we found so the decision is based on facts.

Compressor wear and refrigerator age

With severe compressor wear on an old Hansa refrigerator, restoration can cost about the same as replacing the appliance, and then it makes sense to consider a new unit. The compressor is the key component of the cooling system: it creates the pressure without which refrigerant won't circulate through the circuit. When the motor hums in fits, trips the overload protector, or fails to build the required pressure, it's not a minor adjustment — it's a full compressor replacement. Plus, a worn compressor under load often brings related faults — a clogged capillary, a failed start relay, or a loss of circuit tightness. The check takes just minutes: the technician measures inlet and outlet pressure, listens to startup, and checks current draw. Age alone isn't a verdict — the condition of the compressor and circuit is what matters, so the conclusion is made after diagnostics, not by year of manufacture. Sometimes an appliance has run for many years but the component still holds its parameters, and then restoration is justified.

What to remember about Hansa refrigerator repair

Here's a quick summary on Hansa refrigerator repair — from decoding indicators to deciding when restoring the appliance no longer makes sense.

  • Error codes and a blinking indicator: they narrow down the likely causes, but the exact diagnosis is made by a technician after inspecting the components.
  • Product line design: bottom or top freezer, No Frost, and a built-in cabinet hint at which component to look at for the fault.
  • Workflow: request, free diagnostics, cost approval, repair, and a 1-year warranty on labor and parts.
  • Refrigerant leak: refrigerant doesn't get used up on its own — when it's low, we look for the leak rather than just topping off the circuit.
  • When it's not worth it: with a leak in the foamed-in section or severe compressor wear, it's more honest to assess whether the repair will pay off.

90brands

Besides Hansa, we repair other refrigerator brands in Astana

We work with every brand sold in Kazakhstan — from Samsung, LG and Atlant to Biryusa, Indesit, Stinol and rare imported makes. Can’t find yours in the list? Call anyway — a technician will come and take a look.

We also repairWe also repairTECH SERVICE08

Besides Hansa refrigerator repair, we fix other equipment in Astana

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE09

Worth reading before Hansa refrigerator repair in Astana

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp