Open until 19:00+7 (778) 096 59 61Call a technician
Tech Service technician next to a blender

Blender Repair in Astana

Free diagnostics, a technician arrives within 60 minutes anywhere in the city. 1-year warranty on labor and parts.

  • 1-year warranty
  • 4 to 20 years of experience
  • Pay any way you like

Our own technicians4 to 20 years of experience

Kairat A.Ruslan S.Nikita O.Kuanysh A.

Repair prices

  • Diagnostics0 ₸
  • Button replacementfrom3 000 ₸
  • Power cord replacementfrom3 000 ₸
  • Motor replacementfrom3 500 ₸
  • Bowl leak repairfrom3 500 ₸
All prices
ours5,06 127 reviews
order database
Common faultsCommon faultsTECH SERVICE02

Common blender faults in Astana

Below are the typical symptoms blender owners come to us with. One symptom can point to several causes, and the technician pinpoints the exact one during inspection.

PricesPricesTECH SERVICE03

How much blender repair costs in Astana

Select your symptom in the tab to see the matching price line.

Button replacementparts not included

1–2 hours

from3 000 ₸

Power cord replacementparts not included

1–2 hours

from3 000 ₸

Motor replacementparts not included

1–2 days

from3 500 ₸

Bowl leak repairparts not included

1–3 hours

from3 500 ₸

Control board replacementparts not included

1–2 days

from3 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after blender repair in Astana

Unresponsive to buttons due to cracked solder joint

1–2 daystime

from 5 000 ₸cost

Problem
The blender did not respond to buttons, only occasionally twitching briefly.
What we did
The technician removed the bottom, resoldered the control board at the button connector, and checked all modes.
Result
The blender turns on again and works in all modes, 1-year warranty on labor and parts.
I want the same
Blender: unresponsive to buttons due to cracked solder joint — after repairBeforeAfter
01 / 03
All repairs
TECH SERVICE mobile technician with a tool case

How blender repair works at your home in Astana

Five steps from request to checking the blender after repair.

  1. Requestsame day

    Describe the symptom and your blender model so the technician brings the right tools.

  2. Technician visitwithin 60 minutes

    The technician comes anywhere in the city to inspect the blender on site.

  3. Scope approvalbefore work starts

    The technician records the list of work and parts that need replacing in the request.

  4. Part selectionby model

    The technician identifies a compatible part based on your blender's model and modification.

  5. Cleanup after repairafter work

    The technician cleans up the workspace, and you check that no extra parts or debris are left behind.

Leave a request

We reply during working hours

Book blender repair in Astana

The technician comes to your home: no need to take the blender to a service center. Tell us which symptoms they should check on site. Technicians have 4 to 20 years of experience, and there's a 1-year warranty on labor and parts.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 096 59 61
Customer reviewsReviewsTECH SERVICE05

Reviews of blender repair in Astana

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Валерий Д.Order No. ZK-2026-766 · 24 April 2026

ours

Техника на балансе ТОО, нужен был чек и акт. Я обычно такое не пишу, но тут пусть будет. Основная жалоба — течёт. Дамир М принял без вопросов, хотя был без записи. Вскрытие показало: щётки. Мастер вышел, послушал, сразу забрал в работу. Пользуюсь и вспоминаю добрым словом)

Repair: blender repair in

Михаил У.Order No. ZK-2026-313 · 28 March 2026

ours

Переезжали в новую квартиру, техника после перевозки захандрила. Вчера работало, сегодня уже течёт. Работает, даже лучше прежнего!!

Repair: blender repair in

Семён Ш.Order No. 2503-5177 · 15 April 2025

ours

Жалоба одна: грееться. Радик Т показал старую деталь, всё прозрачно. Полёт нормальный.

Repair: blender repair in

Фариза Л.Order No. 70959 · 8 February 2025

ours

Техника көшіру кезінде істен шықты. Күтуге уақытым аз еді, сол күні бітірді. Келесіде де осында келемін.

Repair: blender repair in

Надежда Ц.Order No. 2411-2174 · 11 June 2024

ours

Друг из Сарыарки посоветовал это место. Причина обращения — течёт. Тихо, ровно, без сюрпризов.

Repair: blender repair in

Наталия С.Order No. AST-2305-426 · 18 October 2023

ours

Живу в Есиле, искал сервис, чтобы не тащится через весь город. Утром столкнулся с этим: не крутится. Дамир М провозился, но сделал. 9 500 за работу и деталь, считаю нормально. Нужна была новая деталь: щётки. Сделали так, что и не придерёшься.

Repair: blender repair in

Семён Ш.Order No. ZK-2023-369 · 28 June 2023

ours

Позвонил в четыре места, тут ответили по-человечески. Больше всего мешало: течёт. Пользуюсь и вспоминаю добрым словом

Repair: blender repair in

Ангелина Я.Order No. AS-7672 · 4 April 2023

ours

В Астане с сервисами беда, поэтому выбирал по отзывам. Привёз на диагностику: блендер. С чем обратился: течёт. Радик Т показал старую деталь, всё прозрачно. Нужна была новая деталь: двигатель. Сначала думал, что нужен паспорт, но обошлось. Ни копейки больше обещаного. Пользуюсь и вспоминаю добрым словом.

Repair: blender repair in

Михаил У.Order No. AS-7800 · 8 November 2021

ours

Первое, что заметил: греется. Радик Т всё сделал при мне, за пятнадцать минут. Пользуюсь и вспоминаю добрым словом)

Repair: blender repair in

Леонид П.Order No. AST-2104-420 · 2 October 2021

ours

Техника на балансе ТОО, нужен был чек и акт. Настроение было — хуже некуда. Больше всего мешало: течёт. Дамир М провозился, но сделал. За такую работу 4 000 — адекватно. Привезли на такси, приняли без вопросов. Работает, даже лучше прежнего!!

Repair: blender repair in

Our technicians in Astana

01 / 08
Kairat A., senior small appliance technicianexperience14 years

Kairat A.

Senior small appliance technician

Ruslan S., on-site coffee machine diagnostics technicianexperience15 years

Ruslan S.

On-site coffee machine diagnostics technician

Nikita O., coffee machine cleaning technicianexperience5 years

Nikita O.

Coffee machine cleaning technician

Kuanysh A., coffee machine diagnostics technicianexperience12 years

Kuanysh A.

Coffee machine diagnostics technician

Aydar A., portafilter coffee machine technicianexperience5 years

Aydar A.

Portafilter coffee machine technician

Serikbay A., vacuum cleaner repair technicianexperience12 years

Serikbay A.

Vacuum cleaner repair technician

Artur G., vacuum cleaner repair technicianexperience15 years

Artur G.

Vacuum cleaner repair technician

Akzhol K., washing machine repair technicianexperience18 years

Akzhol K.

Washing machine repair technician

Questions and answersQuestionsTECH SERVICE06

Questions about blender repair in Astana

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Why is my blender humming but the blades aren't spinning?

Most often the issue is with the gearbox or coupling that transfers rotation from the motor to the blades. Less commonly, the motor itself is to blame. A technician will run free diagnostics and pinpoint the exact cause.

What should I do if the blender leaks where the jar attaches?

The gasket may be worn out or the jar body may have a crack. Don't use the appliance to keep liquid from getting into the motor. A technician will identify the cause on site and replace the seal or the jar.

Can a blender with electronic controls and a display be repaired?

Yes, we repair these models: we diagnose the control board and replace buttons and displays. If the module needs replacing, the technician will select the right one for your model.

Why does my immersion blender smell like something is burning?

A burning smell usually points to motor overheating or worn brushes, and sometimes to a short circuit in the wiring. Stop using the appliance and call a technician: continued use could cause a fire.

Do you repair blender attachments and blades separately?

Yes, we repair and replace attachments, blades, and other removable parts separately from the main unit. This restores functionality without replacing the entire appliance.

Is there a warranty on a replaced blender motor?

Yes, we provide a 1-year warranty on the replaced motor and other parts, as well as on labor. That means if the same issue happens again due to our work, you can contact us again.

Repair guideArticleTECH SERVICE07

Blender repair in Astana by Tech Service with a technician visit

Kairat A., senior small appliance technician

Author: Kairat A.,Senior small appliance technician

Published
Updated

Tech Service repairs blenders in Astana as a direct contractor: our technician comes to your home within 60 minutes anywhere in the city or takes the appliance to our service center. Diagnostics are free, the technician gives you the price after diagnostics, and we provide a 1-year warranty on labor and parts.

Why the blender stopped working and what broke

A symptom alone rarely points to one specific component. Let's look at typical complaints and what usually causes them.

The blender won't turn on, even though the outlet works

Most often the culprit is the power cord, the power button, or the control board, not the motor. The cord and plug are checked for kinks at the base and signs of melting — that's where the contact breaks from constant bending when carrying. The power button on household models withstands a limited number of presses, and after several years of daily use the contact inside burns out. The control board fails due to moisture getting inside the housing or a voltage spike: the traces and triac stop supplying power to the winding. We check the power cord and plug first, then test the button circuit and inspect the board. If the appliance is silent after a fall, the button may be mechanically stuck — don't press it repeatedly, as that finishes off the contact. If your own checks don't help, a technician performs blender repair in Astana after free diagnostics.

It hums but the blades don't spin

The sound of the motor without blade rotation almost always indicates the gearbox, shaft drive, or attachment coupling. The gearbox transmits rotation from the motor to the shaft, and its plastic gears wear out from overload — for example, when hard foods are put in the bowl without liquid. The coupling or clutch of the attachment connects the shaft to the blade and is designed to break when jammed to protect the electric motor; after it triggers, it spins freely. The motor itself is often intact with this symptom, and that's good news: restoration costs less by replacing the worn unit rather than the winding. We check the gearbox and shaft drive for the complaint "hums but doesn't spin" and separately assess the condition of the coupling. If the humming is accompanied by a burning smell, the motor is already under load — don't keep turning it on, as this accelerates winding wear.

Leaking, overheating, sparking, and showing an error code

  • Leaking from the bowl: worn gasket or seal, less often a crack at the base of the jug.
  • Overheating and shutdown: the thermal fuse tripped from long operation without a pause or from blades clogged with food.
  • Sparks and burning smell: damaged wiring inside the housing or a blown control board.
  • Error code on the display: some codes signal overheat protection and clear when the appliance cools down.
  • Vibration and knocking: unbalanced blades or a loose shaft mounting to the housing.

What to check yourself before the technician arrives

Some breakdowns are resolved on the spot without repair, and a few simple checks will save you a call and time — it's worth doing them before calling the workshop.

Checking the outlet, cord, and button

  • Outlet and extension cord: plug another appliance into the same point — if it works, power is fine and the issue is with the blender itself.
  • Plug and cord: inspect the cable along its entire length for kinks at the plug and at the housing — that's where the wire most often frays, and it's not visible from the outside.
  • Power button: press it several times with force — a stuck contact under the wedge won't close.
  • Lid and lock: many models won't start without a tightly closed lid and correctly inserted bowl — check the latches.

Overheating and restart protection

If your blender shuts off after a minute of use, let it cool down completely and don't turn it back on right away. There's a thermal fuse inside the housing: when the motor winding overheats, it breaks the circuit and protects the motor from burning out. Different models behave differently — some reset automatically after cooling, while others have a one-time fuse that needs to be replaced. Thick mixtures, running on high speed for more than two or three minutes straight, and filling the jar above the mark are common triggers. Turning it back on while it's still hot doesn't diagnose the cause — it just puts more stress on the thermal fuse and motor winding. In my opinion, letting it cool for 20–30 minutes is the most honest test: if it starts working after the pause, the issue is the protection, not the electronics.

When it's best not to touch it yourself

If you see sparks, smell burning, or the blender has been dropped and the housing is damaged, it's best not to turn it on until a technician has looked at it. Sparks point to a problem in the power circuit or a short in the motor winding, and a burning smell means the control board has overheated and the insulation is melting. Every attempt to start it in this condition causes more damage: a blown triac on the board takes neighboring components with it, and a seized motor shaft ruins the winding. Taking the housing apart without experience often ends with broken clips and a damaged board — that makes the repair more expensive than the original problem. In such cases, blender repair shops offer free diagnostics before restoration: it shows exactly what failed and helps you decide whether it's worth fixing.

How repairs work at home or in the shop

The format depends on the part: some work the technician can do on-site, some requires the shop. Let's break down how the process works and what affects the timeline.

What the technician does on-site

On-site, we perform free diagnostics, tell you the cause and the cost, and if the job allows, fix the issue right there. Most often, home visits cover replacing a button or switch, fixing a leaky gasket, cleaning contacts in the power connector, and checking the power cord for kinks. The on-site technician arrives with their own tools and tester, opens the housing, checks the power circuit and motor winding, and tests the board and power button. If the problem is in the electronics or a new motor is needed, they note it in the diagnostic report and explain why the part is replaced in the shop, not in your kitchen. A 60-minute visit anywhere in the city means all you need is a power outlet and some free space for the inspection — a table or the edge of a countertop will do.

When the blender is taken to the shop

Control board repairs, motor replacement, and complex electronics cases are usually done in the shop, not at home. A board with a display and microcontroller isn't soldered in your kitchen: that kind of work needs shop conditions and load testing after reassembly. The motor is replaced with the housing and gearbox disassembled — that can't be done neatly on-site, and without checking the shaft for runout, the new unit will fail quickly. Moreover, some models with electronic control require additional testing after a board replacement, and that's also done in the workshop. If the technician suggests taking the appliance in, ask exactly which jobs require the shop — that helps you understand the scope and avoid agreeing to unnecessary work.

How long the repair takes and what it depends on

The timeline depends on the part and how much disassembly is needed, so we give you an exact time after diagnostics. Replacing a button or switch requires less disassembly of the housing, and fixing a leaky gasket stays in the same range because the housing is only partially opened. Motor replacement involves disassembling the gearbox and checking the shaft, so it takes more time. The timeline is also affected by how deeply the housing needs to be taken apart: the fewer parts to remove, the faster the job is done. The cost is quoted after free diagnostics, along with the cause and the list of work — so you see what you're paying for before disassembly begins. If the needed part isn't in stock, the technician tells you in advance and agrees on the delivery time, so you're not left in the dark.

Which blenders we repair

Blenders vary in design and electronics, so let's break down what actually gets repaired—from immersion models to units with a control board and display.

Types of blenders and what breaks in them

Blender typeCommon failure pointsRepair format
ImmersionAttachment coupling, button, cordMore often at home
CountertopJar gasket, gearbox, motorOften at the service center
Blender-mixerDrive, jar mountAt home or at the service center

Brands Bosch, Philips, Braun, ST and others

We repair blenders from Bosch, Philips, Braun, ST, and devices from unknown Chinese brands—based on inspection. Service shops for such devices often turn away brands without documentation, but we take the device apart and identify the cause by its components. With branded appliances, it's easier to find a compatible part using the model catalog; with unknown brands, we sometimes have to select a component by specifications—shaft diameter, coupling fit, motor speed. Our technicians have been working with blenders for 4 to 20 years, so by the sound and behavior when turned on, they often understand the nature of the breakdown before disassembly. In our experience, budget models more often fail at the attachment coupling, while expensive ones—in the electronics. If you don't know the brand of your device, the technician will identify it by the housing and nameplate during inspection. A technician visit takes 60 minutes anywhere in the city, and diagnostics are free.

Blenders with electronic controls and display

We also service blenders with a control board and display, including cases with an error code on the screen. The electronics control speed, locks, and motor protection, so during a failure the device may not turn on or may run erratically even with a working motor. The technician checks the board, contacts, and ribbons, and if necessary replaces failed components. An error code on the display helps narrow down the search but doesn't replace diagnostics—the same signal on different brands points to different components. Electronics are sensitive to voltage spikes—if the blender is plugged into a cheap extension cord, it's worth replacing it to avoid repeating board repairs. During free diagnostics, we identify the cause of the failure and explain what exactly needs replacement, and we provide a 1-year warranty on labor and parts.

Repair of attachments, blades, and individual components

You don't always need to repair the entire blender—sometimes it's enough to replace one component or attachment. Let's look at three typical situations where a part is replaced rather than the whole appliance.

Replacing blades and attachments separately from the housing

We replace blades and attachments separately from the housing if the motor and board are working. Most often, the blade mount needs replacement: the bushing wears out, the shaft starts to wobble, and the jar stops holding up under thick puree. Blender attachments—whisk, shredding disc, dough hook—fail in their own way: the whisk splines wear out, disc edges dull, plastic couplings lose teeth. We replace them individually, without buying a new set, and select the part for the specific model—mounting dimensions differ between Bosch, Philips, and Braun, so there's no universal attachment that fits all. Before replacement, the technician checks shaft play by hand and runs the motor without load—this shows that the issue is indeed the attachment. Dull blades can't be 'fixed' by sharpening at home—they are replaced, otherwise the appliance continues to work under overload and heats the motor more than usual.

Fixing leaks and replacing the gasket

Leaks from under the jug are usually fixed by replacing the gasket and seal, not the entire jug. The rubber ring at the junction of the jug and motor block hardens and cracks over time and stops fitting tightly—liquid runs down the shaft to the motor. We remove the jug, inspect the seat, check the integrity of the shaft and the condition of the bearing, then replace the gasket and seal with new ones. The jug itself remains original: cracks and chips on it are a separate case, then the entire jug is replaced. During inspection, the technician also checks the motor block seat: if liquid has already reached the motor, a gasket alone won't fix it. If a leak appears after washing in hot water, the cause may be deformation of the seal—replacement solves this without touching the housing.

Prevention and cleaning as an addition to repair

We provide prevention and cleaning as a separate service or together with maintenance if the unit is already disassembled. Fibers, starch, and smoothie residue accumulate in the blade area and under the seal—they clog the seating gaps and prevent the shaft from rotating freely. We clean the disassembled unit, remove carbon deposits and old lubricant traces, and check the thermal fuse: it trips on overheating and after reset does not always return to working condition. The technician also checks the condition of the motor brushes and button contacts—on a disassembled housing this takes a couple of minutes. Regular cleaning of the blade area and seal reduces the load on the motor—some overheating cases are due to contamination, not a breakdown, and after prevention the device heats up noticeably less under the same load.

Warranty, diagnostics, and payment procedure

Let's explain what the warranty covers, how diagnostics are performed, and when the cost is quoted. These three things are what blender owners most often want to know before work begins.

What the 1-year warranty on labor and parts means

We provide a 1-year warranty on labor and parts—it covers both the replaced motor and other components. If the same unit fails again after a few months, you come back to us instead of starting the search for a technician anew. The condition is simple: labor and the part are one package, so replacing the motor, button, or gearbox is covered by the same term. If the same unit fails again, we replace it under the same obligation. A warranty only makes sense when it is given by the same provider who performed the work: when dealing through an intermediary, responsibility is blurred between the dispatcher, contractor, and parts supplier, and proving the cause of failure becomes difficult.

Free diagnostics and when the cost is quoted

Diagnostics are free, and the technician quotes the cost after them—when the cause and scope of work are clear. No one guesses the amount before inspection: a blender with a cracked coupling and a device with a burnt-out motor require different sets of operations, and guessing here is pointless. The technician checks the power supply, motor winding, blade assembly, and jug seal, then explains what exactly failed, what intervention options exist, and how they differ in scope. If after diagnostics you decide not to repair the device, you don't need to pay for the inspection itself—diagnostics are free. For residents of Astana this is convenient: the decision is made on the spot, without obligations or pressure. This procedure saves time and money for those who first want to understand the extent of the breakdown.

Payment and direct provider without intermediaries

Payment and a direct contractor, no middlemen — you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies, and we work as a direct contractor, without aggregators or intermediaries. The technician who comes to your home or takes in your blender at the service center is our employee, not an outside subcontractor, so they are also responsible for the quality of the repair and the warranty. In practice, this means that if there's a dispute, you don't have to look for a third party or send complaints back and forth between a dispatcher and a workshop: responsibility for the result lies with the same person who did the work. This approach removes unnecessary approval steps, shortens resolution times, and lets you discuss all repair details with the technician right on the spot. Our experience ranges from 4 to 20 years among our specialists, and a technician arrives at your home within 60 minutes anywhere in the city. Practical tip: when accepting the work, ask what was done and what the warranty covers — this locks in the agreements without middlemen.

What to remember about blender repair

Here's the key things to keep in mind before calling a technician: what determines the cause of a breakdown, which checks you can realistically do before the specialist arrives, and how the whole process works.

  • The symptom points to a specific component: won't turn on — power cord, button, or board; hums without spinning — gearbox or coupling; leaks — gasket.
  • Some checks can be done before calling a technician: outlet, cord, letting it cool after overheating; if there are sparks or a burning smell, it's best not to turn the appliance on.
  • The type of work depends on the component: attachments and gaskets are replaced on-site, while electronics and motors are more often taken apart at the service center.
  • A 1-year warranty on labor and parts works when it's given by a direct contractor, not an intermediary.
  • The cost is quoted after free diagnostics, so you decide with a clear understanding of the cause, not blindly.

37brands

Which blender brands we repair in Astana

Technicians with 4 to 20 years of experience work with popular household blender brands. Find your model in the list.

We also repairWe also repairTECH SERVICE08

Besides blender repair, we fix other equipment in Astana

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE09

Worth reading before blender repair in Astana

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp