Open until 19:00+7 (778) 046 88 53Call a technician
Tech Service technician next to a watch

Smartwatch Repair in Astana

A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.

  • 1-year warranty
  • 4 to 20 years of experience
  • Kaspi QR, Kaspi Red, card, cash, or bank transfer

Our own technicians4 to 20 years of experience

Adil S.Alibek I.Vladislav M.Sergey K.

Repair prices

  • Diagnostics0 ₸
  • Battery replacementfrom1 000 ₸
  • Quartz clock repairfrom3 000 ₸
  • Watch glass replacementfrom4 500 ₸
  • Wall and floor chiming clock repairfrom5 500 ₸
All prices
ours5,06 127 reviews
order database
Common faultsCommon faultsTECH SERVICE02

Common smartwatch faults in Astana

Below are typical symptoms and likely causes. The technician will confirm the exact cause and price after free diagnostics.

PricesPricesTECH SERVICE03

How much smartwatch repair costs in Astana

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Battery replacementparts not included

1–2 hours

from1 000 ₸

Quartz clock repairexact price — after the free diagnostics

1–3 hours

from3 000 ₸

Watch glass replacementparts not included

1–2 hours

from4 500 ₸

Wall and floor chiming clock repairexact price — after the free diagnostics

1–3 hours

from5 500 ₸

Mechanical clock repairexact price — after the free diagnostics

1–3 hours

from6 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after smartwatch repair in Astana

Cracked smartwatch glass after impact

1–2 hourstime

from 19 000 ₸cost

Problem
After hitting a door frame, the top glass of the smartwatch cracked, while the display and touch sensor still worked.
What we did
The technician removed the display module, cut off the cracked glass on a heating separator, glued on a new one, and tested the sensor.
Result
The glass has been replaced, the sensor and display have been tested — the watch works as before, with a 1-year warranty on the work and on the parts.
I want the same
Watch: cracked smartwatch glass after impact — after repairBeforeAfter
01 / 03
All repairs
TECH SERVICE mobile technician with a tool case

How smartwatch repair works in Astana

Five steps from request to checking your watch after repair.

  1. Requestsame day

    Submit a request on the website or by phone, describe the symptom and your watch model.

  2. Technician visitwithin 60 minutes

    A technician will arrive anywhere in the city within 60 minutes after your request is confirmed.

  3. Approval of workbefore disassembly

    The technician discusses the scope of work and price with you before starting the repair.

  4. Preparationafter inspection

    The technician records the model and serial number and checks key functions so the right modules aren't affected.

  5. Watch handoverafter repair

    You and the technician check the screen, buttons, and charging against a short checklist.

Leave a request

We reply during working hours

Book smartwatch repair in Astana

Submit a request — a technician will arrive within 60 minutes anywhere in the city. Tell us the model and symptom so the technician brings the right tools and parts.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 046 88 53
Customer reviewsReviewsTECH SERVICE05

Reviews of smartwatch repair in Astana

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Ангелина Я.Order No. AST-2610-998 · 17 January 2026

ours

Искал, кто работает в субботу, у нас с женой график сложный. Было ощущение, что попал на замену целиком. Причина обращения — не включается. После ремонта — как новое.

Repair: watch repair in

Дархан А.Order No. AS-9083 · 7 December 2025

ours

Қыс қатты, техникасыз қиын, сондықтан тез жөндеу керек болды. Мастер бірден қарап шықты. Диагностика тегін болды. Бөлшек қоймада бар екен, күтпедік. Екі күннен кейін өзі қоңырау шалды. Жұмыс істеп тұр, шағым жоқ

Repair: watch repair in

Яна Э.Order No. AST-2211-706 · 28 July 2022

ours

Друг из Сарыарки посоветовал это место. Проблема ровно одна: не синхронизируются. Работает, как будто и не ломалось.

Repair: watch repair in

Екатерина К.Order No. ZK-2022-210 · 12 July 2022

ours

Турарбек Кайрош пообещал и сделал, без напоминаний. Итог — 17 500 тенге, ничего сверху. Третий месяц — никаких проблем.

Repair: watch repair in

Маргарита П.Order No. TSA-12488 · 8 August 2021

ours

Смотрел, чтобы был свой склад запчастей, а не под заказ. Основная жалоба — перестали считать пульс. Тихо, ровно, без сюрпризов.

Repair: watch repair in

Семён Ш.Order No. TSA-28427 · 18 November 2020

ours

Искал, кто работает в субботу, у нас с женой график сложный. Основная жалоба — перестали считать пульс. Ни шума, ни запаха, всё штатно

Repair: watch repair in

Галина Ф.Order No. TSA-74570 · 22 January 2019

ours

Причина обращения — разряжается за день. Турарбек Кайрош показал старую деталь, всё прозрачно. Проверил на всех режимах — держит.

Repair: watch repair in

Мария Р.Order No. TSA-69216 · 14 March 2018

ours

Хотел вызвать на дом, но в ЖК не пускают без пропуска. Вечером включил — не включаеться. Работает, даже лучше прежнего

Repair: watch repair in

Фёдор Б.Order No. AS-6872 · 17 September 2017

ours

Смотрел, чтобы был свой склад запчастей, а не под заказ. Ни с того ни с сего — разряжается за день. Сейчас пашет без нареканий)

Repair: watch repair in

Римма Х.Order No. 1605-6097 · 22 July 2016

ours

Дамир М посмотрел и честно сказал: менять не надо. Сначала думал, что нужен паспорт, но обошлось. Третий месяц — никаких проблем.

Repair: watch repair in
See all reviews

Our technicians in Astana

01 / 07
Adil S., lead electronics repair technicianexperience7 years

Adil S.

Lead electronics repair technician

Alibek I., mobile PC repair technicianexperience10 years

Alibek I.

Mobile PC repair technician

Vladislav M., laptop repair and assessment technicianexperience10 years

Vladislav M.

Laptop repair and assessment technician

Sergey K., digital device repair technicianexperience15 years

Sergey K.

Digital device repair technician

Kirill L., laptop and all-in-one repair technicianexperience15 years

Kirill L.

Laptop and all-in-one repair technician

Oraza B., TV screen replacement technicianexperience10 years

Oraza B.

TV screen replacement technician

Baurzhan I., backlight replacement technicianexperience9 years

Baurzhan I.

Backlight replacement technician

Questions and answersQuestionsTECH SERVICE06

Questions about smartwatch repair in Astana

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Can a smartwatch be repaired if it won't turn on after a fall?

Yes, in many cases the watch can be brought back to life: after a fall, the flex cable, contact, or display module is usually damaged. Free diagnostics will pinpoint the exact cause, and it depends on the model.

What should I do with a smartwatch that got wet and won't turn on?

Don't try to charge it or press any buttons — let the device dry first and don't turn it on. It's best to show the watch to a technician right away: the sooner work begins, the higher the chance of saving the board.

Why did a Samsung smartwatch stop charging and show zero battery?

Most often the battery, contact group, or power controller is to blame, but dirty charging contacts can also be the cause. Diagnostics will show exactly what failed — it depends on the model.

Can a smartwatch be fixed if the screen is cracked but everything works?

Yes, this repair is done: the glass or display module is replaced so moisture and dust don't get inside through the crack. Leaving a damaged screen for long isn't a good idea — the touch sensor may suffer over time.

The Xiaomi Mi Band stopped syncing with the phone — is it a breakdown or a setting?

First check Bluetooth, update the app, and reconnect the band — often it's a settings issue. If syncing doesn't come back, there may be a faulty communication module, and diagnostics will identify it.

Do you repair Huawei and other brand smartwatches at home in Astana?

Yes, a Tech Service technician comes to your home in Astana within 60 minutes and takes on Apple Watch, Samsung, Huawei, Xiaomi, and other brands. On-site diagnostics are free, and the warranty on labor and parts is 1 year.

Repair guideArticleTECH SERVICE07

Smartwatch repair in Astana with on-site technician and 1-year warranty

Author: TECH SERVICE editorial team

Published
Updated

Tech Service repairs smartwatches of all brands in Astana: a technician arrives at your door within 60 minutes or the work is done at our service center. Diagnostics are free, you get a 1-year warranty on labor and parts, and the technician gives you the price after diagnostics. We are a direct service provider with our own technicians, not a middleman.

Why smartwatches break and what each symptom means

Owners come with a specific symptom, not the name of the fault. Each symptom has a limited set of causes — let's break them down by group so it's clear which fault is developing in the device.

The watch won't turn on or charge

Most often, "won't turn on" means a completely drained battery, oxidized contact pads, or a damaged board after a drop. Devices handle a full discharge differently: the charging controller goes into protection mode and stops accepting current, while the contacts on the case oxidize from sweat and moisture, so power simply doesn't reach the battery. If the device has been dropped, you can add a microcrack in the board solder or a loose display flex cable — the case looks intact, but the power circuit is broken. Smartwatch repair in Astana starts with free diagnostics: a specialist checks the charging circuit, pads, and flex cables and tells you the cause. If the device shows no signs of life after a drop, don't try to force-charge it — a short circuit in the damaged board can finish off the power controller, and diagnostics will show a different picture.

Fast battery drain, overheating, and touchscreen issues

Fast battery drain and overheating during charging almost always point to a degraded battery or a faulty power controller, while a "dead" touchscreen points to a damaged digitizer or oxidized flex cable. A lithium-ion cell loses capacity after two or three years of daily charging: the device holds a charge for less than a day, shuts down in the cold, and the case gets noticeably warm when plugged in. If not only the battery area but also the board area heats up, the problem is the power controller — it stops distributing current correctly. The touch layer fails for another reason: after moisture or an impact, the flex cable oxidizes, and part of the screen stops responding to touches or registers phantom taps. Overheating during charging is more dangerous than it seems: a lithium-ion battery degrades faster in this mode, so don't put off diagnostics even if the device still works.

Moisture and a cracked screen

Moisture causes oxidation of contacts and the board, and cracked glass, even with a working display, compromises the case's water resistance. The seals are rated for immersion up to 50 m according to the standard, but after swimming in a pool or shower, the seal is compromised: chlorinated and soapy water gets inside and settles on the contacts, and corrosion eats away the board traces within days. Cracked glass breaks the same protection differently — through the crack, moisture and dust get directly to the OLED matrix, and gradually spots, lines, or dark areas appear on the display. Technicians see such cases regularly around the city: the device keeps working, the owner isn't in a hurry, but oxidation is already underway inside. Cracked but working glass is no reason to wait: moisture and dust get inside through the crack, and in a few weeks, board cleaning will be added to the glass replacement.

On-site technician or repair at the service center

Two service formats solve different problems. Let's look at when it's more convenient to call a specialist and when it's better to bring the device to the workshop, and how each option works.

How an on-site technician visit works

We send a technician to your home within 60 minutes anywhere in the city, and on site they run a free diagnostic and then quote the cost of the work. The visiting specialist arrives with their own tools and handles tasks that don't require soldering: charging port, strap mount, frozen firmware, settings knocked off after a drop. In our experience, most call-outs are exactly these kinds of issues — you don't go a single day without your watch and you know right away what the repair will involve. This format works well when you can't leave the device for a few days or the fault doesn't need complex equipment: everything is sorted right at your place, and the 1-year warranty on labor and parts applies regardless of location. Before the visit, clear a table and keep the watch at least partially charged — that way the diagnostic takes less time.

When you need in-shop service

Board soldering, contact restoration and display replacement require service equipment, so we do these jobs in the workshop, not on site. In the workshop we do a full case teardown, work with water protection and check modules after the repair — that scope can't be replicated at home. This format is chosen when the watch won't turn on after water, the screen has cracks or the board needs contact re-soldering. The visiting specialist will determine which work can be done on site and which requires stationary conditions — you don't need to guess the complexity of the fault in advance. Our experience of 4 to 20 years across different technicians helps quickly tell a simple case from one that requires stationary conditions.

Comparison of formats

FormatWhen it suitsWhat happensWhat we check
Technician call-outYou don't want to part with your watchTechnician arrives within 60 minutesOn-site diagnostics
In-shop repairSoldering or display replacement neededDevice stays in the workshopFull diagnostics
DiagnosticsCause of the fault is unclearFree in any formatCause identified before work starts

Which smartwatch brands and models we repair

We work with smartwatches and fitness bands from various brands. Below we explain how the approach differs for different lines and what owners should pay attention to when something breaks.

Apple Watch, Samsung Galaxy Watch and Huawei Watch

We accept Apple Watch Series, SE and Ultra, Samsung Galaxy Watch and Huawei Watch, including Watch GT models. These lines most often suffer from battery and screen glass issues: battery capacity drops after two or three years of daily charging, and the glass cracks from impact on a hard surface. Disassembly requires care with the water-protection gaskets and the adhesive layer around the case — careless opening breaks the seal and the watch starts letting moisture in. After reassembly we close the case carefully so the device isn't damaged by sweat or rain in the first days. In my opinion, owners of these models should replace the battery before the case starts heating up during charging: overheating accelerates wear on the power controller, and then a second fault is added to the battery.

Xiaomi Mi Band, Amazfit and Garmin

We also service Xiaomi Mi Band fitness bands, Amazfit watches and Garmin devices, and they have their own typical faults. With Mi Band and Amazfit, some requests turn out to be a synchronization failure with the phone rather than a breakdown: firmware and sensor calibration solve it without replacing parts, so there's no need to rush into disassembly. Garmin more often has issues with buttons, strap and glass, as well as battery drain in the cold — in winter in Astana the band loses charge faster than usual due to low temperatures. The cases of these models are compact, the strap mounts are fragile, and an unsuccessful attempt to open the band at home often ends with broken latches. In our experience, diagnostics pays off especially well here: it rules out software failures before the technician picks up a tool.

What's common in the approach to different brands

Regardless of the brand, service starts with free diagnostics that identify the cause of the problem before any work begins. The brand affects parts availability and how difficult it is to disassemble the device, but not the diagnostic logic — first the cause, then the work, not the other way around. Apple Watch and Galaxy Watch are harder to open, Mi Band has a densely packed board, and Garmin has sealed buttons, but the procedure is the same: check power, test sensors, inspect the glass and case. Components are replaced only after the cause is confirmed; otherwise you might replace a working part and still not fix the issue. For residents of the capital, this saves time: the technician arrives with a clear work plan. The approach is the same for any lineup, whether it's a flagship watch or a simple band.

What to do before the technician arrives

While the technician is on the way, a few simple steps can help you avoid making the damage worse. Here are three common scenarios: water exposure, overheating during charging, and a drop with a cracked screen.

If the watch gets wet

  • Don't turn it on: powering a wet board speeds up oxidation of traces and contacts.
  • Don't charge it: connecting a damp device to power puts the charging controller and battery at risk.
  • Don't heat it: a hair dryer or radiator accelerates contact corrosion instead of helping.
  • Blot the outside: remove droplets from the case, buttons, and charging contacts with a dry cloth.
  • Let it dry: leave the watch in a dry place at room temperature until the technician arrives.

If the watch heats up while charging

Heating during charging signals a faulty battery or charging controller, and you shouldn't keep charging such a watch. Disconnect the charger as soon as you feel the case getting hot: in this mode a lithium-ion battery loses capacity faster than usual and in rare cases swells and deforms the case. After that, don't leave the device charging unattended and don't put it under a pillow or on a soft surface — heat dissipates poorly there. Remove the strap so the case cools evenly, and place the watch on a hard, non-flammable surface away from papers and fabric. If a bulge appears on the back cover or it has come loose, don't press on it or try to fix it: it's best not to touch the damaged component until diagnostics.

If the watch was dropped or the screen cracked

After a drop, don't try to "test" the device by turning it on repeatedly — that puts extra stress on the damaged board. From a fall, the OLED matrix often cracks not only outside but also inside, and the thin display flex cables detach from the contacts — each power-on sends current through them and the break grows. If the screen shows lines, spots, or partially doesn't respond to touch, don't press on the glass trying to "push" the image. If the glass is cracked but the screen works, it's better to replace it before moisture gets inside: water penetrates through the crack to the board, and then the repair becomes a board cleaning instead of just glass replacement. Remove the strap and put the watch in a dry place, and don't blow the shards off the case — tiny glass crumbs scratch the sensor.

Warranty and how to tell a reliable technician

A warranty and transparent work distinguish a service center from a private ad. Here's what our warranty covers and what details to look at when choosing a technician.

What the 1-year warranty covers

We provide a 1-year warranty on labor and parts, meaning we stand behind both the quality of work and the installed components. Our technicians have 4 to 20 years of experience, so every job is backed by practice, not a one-time side gig. If the watch starts acting up again after the repair, you return to the same technician who knows the device's history instead of looking for a new one. The parts warranty matters separately: if a part fails, replacement is covered by the warranty, not at your expense — ask about this before work begins. In my opinion, a one-year term is a fair benchmark: during this time, soldering defects, battery flaws, and the quality of the seal after water damage all show up. So make sure the terms are confirmed by the technician during diagnostics, not just in a chat message.

The watch is still under the manufacturer's warranty

If the device is under the manufacturer's warranty, first check whether your issue is covered — mechanical damage and moisture usually aren't. A cracked screen, a chipped case, or traces of liquid on the board are considered non-warranty cases by the manufacturer, and the inspection can take weeks of back-and-forth. Our diagnostics are free: the technician identifies the cause before any work begins, and you see exactly what fault has been found. Decide whether to repair after diagnostics: it will show the cause, and you can compare what's more worthwhile — waiting for the manufacturer's warranty or fixing it right away. In our experience, watches with a cracked glass are more often repaired on the spot, because waiting doesn't change the cause. And diagnostics can be done without disassembly — based on the symptom and how the screen behaves.

What to look for when choosing a technician

  • Cause before work: the technician explains what broke before disassembly, not after.
  • Scope of work: it's clear what will be replaced and what will be repaired, with no vague wording.
  • Warranty: on labor and parts, not just a single phrase "on everything."
  • Direct contractor: the work is done by the person who quotes it, not an intermediary.
  • Diagnostics: free and before you decide on repair, with no conditions.

Cost, timeline, and how to get started

The cost of repairing a smartwatch depends on the cause of the breakdown and the parts needed, so it's quoted after free diagnostics. Below is what makes up the price, when repairs make sense, and how the process works from request to finished device.

What the cost consists of

The technician quotes the cost after free diagnostics, because it depends on the cause of the breakdown and the parts needed. In our experience, the same complaint "won't hold a charge" can mean either a battery replacement or a power controller repair — these are different jobs in terms of labor and parts. Three things affect the final amount: the component that failed, whether it needs replacement, and how difficult it is to access inside the case. That's why we don't give a figure over the phone — without an inspection it would be a guess. Don't rely on the "average price in the city": the same symptom on two models can mean either a battery replacement or a power controller repair, and therefore a different scope of work. Our diagnostics are performed by technicians with 4 to 20 years of experience — they determine what exactly needs attention.

Repair or buy new

The decision to repair or replace depends on the nature of the breakdown: replacing the battery or glass usually extends the device's life, while a dead board can make repairs impractical. The battery and protective glass are consumable components with clear repairability: they get replaced, and the watch keeps working. The board is another matter: if key circuits are damaged, restoration takes more time and parts, and sometimes it's wiser to put the money toward a new model. Repairability is also affected by the case design: on some models the back cover comes off without heat, while on others the component is sealed with adhesive, making access harder. Compare not "repair versus a new watch" but the cost of work against the residual value of your model — after diagnostics, you can assess this objectively. Then the decision is based on facts, not on the emotion of a sudden breakdown.

How the process works

  • Request: you describe the symptom, and the technician clarifies details and the likely cause.
  • Visit or service: the technician arrives within 60 minutes in the city, or you bring the watch yourself.
  • Diagnostics: free, shows the cause of the breakdown and the parts needed.
  • Approval: the technician quotes the cost and scope of work before starting.
  • Repair and warranty: work with a 1-year warranty on labor and parts.
  • Payment: we accept Kaspi QR, Kaspi Red, bank card, cash or bank transfer; you decide knowing the cause and scope.

Smartwatch repair choices that last

Smartwatches break in a few typical ways, and almost every one of them can be fixed with a predictable set of repairs. Here's what's worth knowing before you hand your device over to a technician.

  • A symptom isn't a diagnosis: "won't turn on" or "gets hot" can have only a limited set of causes, and the only way to pin them down is to open the device and run diagnostics.
  • The type of repair depends on the job: simple cases can be handled on-site, while board soldering and display replacement require a service center.
  • The brand doesn't change the approach: Apple Watch, Samsung, Xiaomi, Huawei, and Garmin are all checked the same way — from cause to specific repair.
  • First aid matters: with moisture, overheating, or impact, the wrong moves can make the damage worse before the technician even arrives.
  • Warranty and transparency are key: check what the warranty covers and whether the specialist identifies the cause before starting work.

48brands

Which smartwatch brands we repair in Astana

We repair smartwatches from popular brands. Choose a brand to learn about common issues and services.

We also repairWe also repairTECH SERVICE08

Besides smartwatch repair, we fix other equipment in Astana

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE09

Worth reading before smartwatch repair in Astana

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp