Open until 19:00+7 (778) 096 59 61Call a technician
Tech Service technician next to a tv

TV Motherboard Repair in Astana

A technician arrives within 60 minutes anywhere in the city. Free diagnostics. 1-year warranty on labor and parts.

  • Free diagnostics
  • Arrival within 60 minutes
  • 1-year warranty

Our own technicians4 to 20 years of experience

Oraza B.Adil S.Alibek I.Vladislav M.
ours5,06 127 reviews
order database

1 yearwarranty on labor and parts

60 minutestechnician arrival across the city

freediagnostics

What the job includesIncludesTECH SERVICE02

What TV motherboard repair includes in Astana

The work includes checking power circuits and voltage regulators, soldering and replacing components, and testing the TV after repair. The price is quoted after free diagnostics. 1-year warranty on labor and parts.

Signs of a faultSigns of a faultTECH SERVICE03

When you need TV motherboard repair in Astana

5

The motherboard controls picture, sound, and Smart TV. If the TV won't turn on, turns off by itself, freezes, or loses network connection, the cause may be the board. Diagnostics gives the exact answer.

  1. Won't turn on

    The TV doesn't respond to the remote or power button, and the indicator light is off or blinking.

  2. Turns off immediately

    After turning on, the screen goes dark within seconds and the TV enters protection mode.

  3. No picture but sound works

    There's sound but the screen stays dark — the signal isn't reaching the panel or backlight.

  4. Freezes and restarts

    The TV restarts by itself, the menu freezes, and remote commands respond with a delay.

  5. Smart TV not working

    Apps won't launch, Wi-Fi won't connect, even though the network is available to other devices.

Symptoms fall into groups: power, picture, Smart TV. This helps the technician find the cause faster.

Describe the symptoms
Parts and materialsPartsTECH SERVICE04

Parts and materials for TV motherboard repair in Astana

The board is selected based on the TV model. An original matches the factory configuration, while an equivalent is compatible in connectors and firmware.

Original

Factory board

Compatibility
Exact match for the model
Selection
By part number or model
Firmware
Factory, no modifications
Delivery time
Confirmed by the technician

Equivalent

Compatible board

Compatibility
By connectors and model
Selection
By TV model
Firmware
May require configuration
Delivery time
Confirmed by the technician
PricesPricesTECH SERVICE05

How much TV motherboard repair costs in Astana

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

IR receiver repairparts not included

1–3 hours

from3 500 ₸

TV dust cleaninglabour only

1–2 hours

from4 500 ₸

Smart TV setuplabour only

1–2 hours

from5 500 ₸

TV firmware updatelabour only

1–2 hours

from6 000 ₸

HDMI port repairparts not included

1–2 hours

from6 000 ₸

Work before and afterBefore and afterTECH SERVICE06

Before and after TV motherboard repair in Astana

Motherboard does not boot

1–2 hourstime

from 10 000 ₸cost

Problem
The TV turned on, the indicator light was on, but there was no picture, menu, or sound, and it did not respond to the remote.
What we did
The technician removed the back cover on site, installed a working main board, connected the ribbon cable and connectors, updated the settings, and checked the inputs.
Result
The TV booted, picture, menu, and sound appeared, the remote works; the technician checked the inputs.
I want the same
Artel TV: motherboard won't boot — after repairBeforeAfter
01 / 03
All repairs

We reply during working hours

Book TV motherboard repair in Astana

Leave a request in the way that's convenient for you — the technician will contact you and agree on a time. Ask them any questions you have about the repair.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 096 59 61
Customer reviewsReviewsTECH SERVICE07

Reviews of TV motherboard repair in Astana

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Екатерина К.Order No. ZK-2026-344 · 8 April 2026

ours

Переезжали в новую квартиру, техника после перевозки захандрила. Проблема ровно одна: слетела прошивка. Функционирует, тьфу-тьфу)

Repair: tv repair in

Валерия А.Order No. AST-2512-833 · 23 July 2025

ours

С чем обратился: полосы. Сергей Архипов показал старую деталь, всё прозрачно. После ремонта — как новое)

Repair: tv repair in

Василий Е.Order No. 2408-3151 · 13 March 2024

ours

Друг из Сарыарки посоветовал это место. Сначала списал на мороз, но нет: зависает. Настройки не слетели, всё как было.

Repair: tv repair in

Эдуард К.Order No. 16276 · 17 May 2023

ours

Заявку оставил через сайт вечером, утром перезвонили. Приехал с дачи, а тут — нет картинки. Все функции проверил — работают.

Repair: tv repair in

Ярослав С.Order No. AS-5835 · 4 October 2018

ours

Офис на Кабанбай батыра, технику туда и повёз. Первое, что заметил: не включаеться. Дамир М всё сделал при мне, за пятнадцать минут. Прошивка та же, ничего не сбросили.

Repair: tv repair in

Вадим Г.Order No. 1806-1262 · 11 August 2018

ours

Друг из Сарыарки посоветовал это место. Было ощущение, что попал на замену целиком. Жалоба одна: слетела прошивка. Дамир М показал старую деталь, всё прозрачно. Приехал без записи, но свободный мастер нашёлся. По факту меняли: плата. По деньгам вышло ровно, без сюрпризов. Вернусь при необходимости. Работает, как будто и не ломалось.

Repair: tv repair in

Анастасия Т.Order No. AS-6963 · 3 February 2018

ours

Знакомый мастер раньше здесь работал, дал номер. Было ощущение, что попал на замену целиком. Больше всего мешало: нет картинки. По факту меняли: подсветка. Всё оформили по договору, с печатью и подписью. По деньгам вышло ровно, без сюрпризов. Рекомендую без оговорок. Сделали так, что и не придерёшься.

Repair: tv repair in

Надежда Ц.Order No. ZK-2017-812 · 10 November 2017

ours

Сергей Архипов отсоветовал дорогой ремонт, предложил простой. Замена: плата. Ни шума, ни запаха, всё штатно.

Repair: tv repair in

Любовь Ю.Order No. AS-8017 · 29 July 2017

ours

Офис на Кабанбай батыра, технику туда и повёз. Утром столкнулся с этим: не включается. Выбирал по карте, Tech-service был ближе всех. Вернули — проверил, всё ок.

Repair: tv repair in

Ярослав С.Order No. TSA-23731 · 14 February 2017

ours

Выбирал между официальным и этим, выбрал этот. Больше всего мешало: слетела прошивка. Сейчас пашет без нареканий.

Repair: tv repair in
See all reviews

Our technicians in Astana

01 / 05
Oraza B., TV screen replacement technicianexperience10 years

Oraza B.

TV screen replacement technician

Adil S., lead electronics repair technicianexperience7 years

Adil S.

Lead electronics repair technician

Alibek I., mobile PC repair technicianexperience10 years

Alibek I.

Mobile PC repair technician

Vladislav M., laptop repair and assessment technicianexperience10 years

Vladislav M.

Laptop repair and assessment technician

Sergey K., digital device repair technicianexperience15 years

Sergey K.

Digital device repair technician

Questions and answersQuestionsTECH SERVICE08

Questions about TV motherboard repair in Astana

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Can a motherboard be repaired?

Yes, a TV board is more often repaired than replaced: the technician resolders burnt components and reflashes the memory. Replacement is only needed if the damage is too severe.

How can I tell if the motherboard is dead?

The board is usually the culprit when the TV won't turn on, turns off immediately, freezes, or can't detect Smart TV. The technician makes an accurate diagnosis after free diagnostics.

How long do motherboards typically last?

The board's lifespan depends on the model and the TV's operating conditions. Overheating and voltage surges noticeably shorten it, so the board may fail before its time.

Do you repair TV motherboards or only replace them?

Usually the board is repaired: components are resoldered and traces are restored. A full replacement is needed for severe damage when restoration is impossible.

The TV turns on, there's sound but no picture—what's broken?

With sound but no picture, the board, backlight, or panel is at fault, and they can look similar from the outside. A technician can tell them apart during free diagnostics.

After a thunderstorm the TV stopped turning on—can the board be repaired?

After a thunderstorm, the board can often be restored: the technician checks the burnt components and replaces them. It depends on the model and the extent of damage; the diagnosis is made after free diagnostics.

Repair guideArticleTECH SERVICE09

TV motherboard repair in Astana by Tech Service

Oraza B., TV screen replacement technician

Author: Oraza B.,TV screen replacement technician

Published
Updated

Tech Service repairs TV motherboards in Astana at your home or in our service center. Our technician arrives within 60 minutes anywhere in the city, diagnostics are free, and we agree on the price before starting work. We restore the board by soldering components or replace it entirely when that makes sense. 1-year warranty on labor and parts.

How to tell if your TV's motherboard is faulty

The motherboard controls everything your TV does, so when it fails, it can look like a broken screen or lost sound. Here's what symptoms point specifically to the motherboard and how to tell its failure apart from matrix and backlight issues.

Symptoms that indicate a faulty board

  • Red light with a black screen: standby light is on, but the TV won't start — a sign of a fault in the board's power circuits.
  • Random reboots: the TV turns on and off without command, stuck in a restart loop.
  • Smart functions don't work: the menu loads with errors, apps won't open, even though the antenna picture is fine.
  • TV doesn't respond to the remote: power and volume buttons don't react, but the indicator light is on.
  • Sound disappears while the picture is fine: the image is stable, but audio is silent or crackling on all sources.
  • Chaotic artifacts in the menu: stripes and freezes specifically in the interface, not in the broadcast picture.

How a board failure differs from matrix, backlight, and T-CON problems

SymptomLikely componentWhat we check
No sound, Smart won't loadMotherboardPower and firmware
Picture gone, sound presentBacklight, matrixBacklight and cables
Image with stripesT-CON boardCable and T-CON itself
Black screen, indicator onBoard or power supplyStandby voltages
Menu freezes, channels playMotherboardProcessor and memory

Repair or replace the board: what it depends on

Whether to restore the circuit by soldering individual components or install a new module entirely is decided by the type of damage and whether the work is worthwhile — not by the service center's desire to sell a part.

When the board is repaired by soldering and when it's replaced entirely

  • Soldering for a pinpoint failure: we replace capacitors, power chips, connectors, and cables when one component is damaged and the rest of the circuit is intact.
  • Replacement for processor failure: if the processor or video processing chip has failed, soldering doesn't give a lasting result — we install a working module.
  • Soldering for local damage: we restore a broken trace or burnt area with a jumper and protective coating, leaving the whole module untouched.
  • Replacement for extensive damage: when a large area is burnt out from liquid damage or a power surge, restoration is more expensive and riskier than installing a working module.
  • Decision after diagnostics: the technician first finds the cause, then agrees with us on soldering or replacement before work begins — no surprises on the bill.

When restoring the board isn't worth it

Recovery makes no sense if the module is rare and replacing it costs as much as a new TV, or if the liquid damage has affected the traces and the processor. For rare models, a working donor is hard to find, and restoring the processor and traces takes a lot of time and doesn't guarantee stable operation. After extensive liquid damage, corrosion goes deep into the circuit, and even a thorough cleaning doesn't help: the failure comes back within a few weeks. Being honest about this is part of the job: the technician will explain the situation and won't push work that isn't justified. Sometimes it's smarter to put money into a new device than to restore a circuit that will fail again — but for spot soldering on an otherwise working board, we provide a 1-year warranty on labor and parts.

How diagnostics and board repair at home work

TV motherboard repair in Astana is usually done at your home, and the equipment is brought to the service center only in certain cases. Here's what the specialist does on-site and how to prepare for the visit.

What the technician checks during board diagnostics

  • Power circuits: uses a multimeter to test voltage lines and look for deviations from the nominal values that prevent the device from turning on.
  • Components: inspects capacitors, traces, and connectors for bulging, cracks, and heat discoloration.
  • Response to controls: checks whether the board receives the remote signal and exits standby mode.
  • Smart functions: tests system and app loading, distinguishing firmware failure from hardware failure.
  • Soldering: if necessary, opens up the suspect unit and repairs it on the spot.
  • Outcome: diagnostics are free, so based on the results you get an accurate conclusion about the unit and scope of work, not a guess over the phone.

How to prepare your TV for the technician's visit

  • Access to the panel: move the screen about half a meter away from the wall so the specialist can easily reach the back cover.
  • Remote control: keep it handy with working batteries — the signal is checked first.
  • Breakdown circumstances: recall if there was a power surge, thunderstorm, or liquid spill — this narrows down the causes.
  • Power: leave the TV plugged in so the circuits can be tested under voltage right away.
  • No disassembly: don't remove the case yourself — this complicates diagnostics and can damage the ribbons that are carefully disconnected during disassembly.

Causes of board failure and what to do after a power surge or liquid spill

Most often, electronics are damaged by power surges, thunderstorms, and liquid spills. Let's go over what to do in each case and when there's still a chance for recovery.

Power surge and thunderstorm

After a power surge or thunderstorm, the board most often suffers in the power circuits, and soldering repair is possible if the processor hasn't burned out. The impulse passes through the unit's input and reaches the secondary circuits: capacitors, fuses, diode assemblies burn out, sometimes the traces around the PWM controller. If the damage is limited to this area, replacing the elements brings the device back to life. When the impulse damages the processor or video core, recovery makes no sense — these units are not replaced separately. Don't turn the device on again: a second power-up can finish off the surviving components and increase the scope of work. Unplug the device from the outlet and call a technician — with arrival within 60 minutes, they will remove the cover and test the circuits on site.

Liquid spill

After a spill, the board can often be saved if you unplug the TV right away and don't try to turn it on before diagnostics. Moisture alone rarely kills components instantly — what's left after it dries is more dangerous: salts and minerals from the water settle on the contacts and trigger electrochemical corrosion. The traces thin out, microcracks appear, and neighboring conductors short together. The longer the board sits with these deposits, the deeper the damage and the fewer areas can be saved. Liquid causes trace corrosion over time, so even a "dried out" device is better shown to a technician rather than waiting for it to start working on its own. A specialist will open the panel, clean the board, and check the contacts — early cleaning stops corrosion before it reaches the processor.

Cost, warranty, and terms of service

When a TV board fails, owners care about two things — how much it will cost and what happens if the unit fails again. Here's how we set the price and what exactly the warranty covers.

How the price is determined and when you're told

The technician gives you the price after free diagnostics, once the faulty unit and scope of work are clear, and confirms it with you before starting. First, the specialist opens the case, tests the power circuits, and checks the board for burn marks and bulging capacitors — these measurements determine which parts need soldering and which components to replace. Diagnostics are free with us whether you agree to the repair or not. Then you get a clear sum for a specific list of operations, not for "TV repair" in general. This approach protects you from surprise charges on the bill: we know upfront what we're paying for and can decline if the work isn't justified. In my view, it's more honest to name the price once before picking up the soldering iron than to add to it during disassembly.

What the 1-year warranty covers

  • Technician's work: if the repaired unit fails again due to our fault, we fix it under warranty at no extra charge.
  • Installed parts: the same 1-year warranty applies to the parts we install during board repair.
  • Warranty claims: keep the records of the work performed — they make it easier to confirm the claim and the date.
  • Signs of outside interference: a new spill, impact, or attempted DIY soldering after our work is a new fault, not a warranty case.

Technician visit and TV brands in Astana

We cover the whole city and work on TV boards from various brands. Here's how to call a specialist, how fast they'll arrive, and which brands we see most often.

How to call a technician and how soon they'll arrive

Our technician arrives within 60 minutes anywhere in the city, and you can request a visit at any time. Diagnostics are free, so you decide on the repair after the board is inspected on site. A Tech Service technician comes with their own tools and works directly, without middlemen or handing the device to third parties. When you call, just give the brand, approximate screen size, and describe what's happening with the screen, sound, and power circuit. The more precisely you describe the symptom — won't turn on, keeps restarting, no sound — the faster the technician will bring the right tools and won't have to make a second trip. The same person who visits your home handles the device afterward, so you don't have to retell the story of the breakdown.

Which brands' boards we service

  • Samsung: the most common brand we work on, power modules and main boards of popular series.
  • LG: we repair power supply units and main boards of LED-backlit models.
  • TCL: we handle units from popular screen sizes, including Smart models.
  • Hisense: we diagnose and repair main boards and power units.
  • Mystery: we service budget models, where the power supply circuit is more often affected.
  • Rare models: component availability is decided individually after diagnostics, not over the phone.

Key points on TV motherboard repair

A quick summary for TV owners whose board has failed: which signs to look for, which route to take, and what helps save time.

  • Board symptoms: no picture with working sound, stripes, spontaneous shutdowns and reboots point to a board fault, not the panel or backlight.
  • Choosing the method: soldering makes sense for a local defect in a single component, while board replacement is the way to go when multiple circuits are damaged or repair isn't worth the labor.
  • After a power surge: don't turn the unit back on before checking — this makes damage to the switching power supply and board circuits worse.
  • Diagnostics and warranty: free diagnostics come before any work, and the 1-year warranty covers labor and parts.
  • Technician visit: a specialist arrives at your home within 60 minutes in the city, so don't put off an inspection when symptoms are clear — early intervention reduces the risk of a full component replacement.
Other servicesOther servicesTECH SERVICE10

Other services besides TV motherboard repair in Astana

If you ask, the technician will check other parts during the same visit.

BlogBlogTECH SERVICE11

Worth reading before TV motherboard repair in Astana

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp