Original
Factory power jack
- Selection
- By laptop model and part number
- Fit
- Matches the factory fit
- Material
- Same as the factory-installed part
- Compatibility
- Full for the specific model
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 096 59 61Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
We restore the charging connection: free diagnostics, a technician at your door within 60 minutes anywhere in the city, and a 1-year warranty on labor and parts.
Our own technicians4 to 20 years of experience




1 yearwarranty on labor and parts
60 minutestechnician at your door anywhere in the city
freediagnostics
Power jack replacement restores the connection between the charger and the laptop's motherboard. The technician checks the jack, the cable, and the power circuit, picks a part for your model, and replaces the worn jack. The price is quoted after free diagnostics.
01
Step 1a few minutes
We check the jack, the charger plug, and the contact with the motherboard, and rule out a problem with the power adapter.
02
Step 2a quick step
We remove the bottom cover and access the power jack without touching nearby components.
03
Step 3the main work
We carefully desolder the worn jack and clean the mounting area.
04
Step 4installing the part
We install a part matched to your laptop model and check how the plug fits.
05
Step 5final check
We put the case back together and make sure the laptop charges and holds the connection.
5
Five common signs point to a power jack problem. If your laptop won't charge or the connection cuts out when you move the plug, it's worth having a technician take a look.
The indicator blinks when you move the plug
The charging light turns on and off if you wiggle the cable in the jack.
The connection cuts out
Charging comes and goes when you wiggle the plug in the jack.
The jack is loose
The plug wobbles in the jack and no longer fits snugly.
The jack gets hot
The area around the jack heats up more than usual while charging.
It only runs on battery
The laptop turns on from the battery but doesn't recognize the connected charger.
Before calling a technician, unplug the charger from the laptop and don't try to hold the plug in place with makeshift objects.
Describe the symptomsThe jack is selected by laptop model and part number. An original part matches factory specs, while a compatible one may differ in fit and material.
Original
or
Compatible
The table shows how much it costs to replace a laptop power jack in Astana: the labor price "from," excluding the part and the time frame; the technician confirms the final amount before starting the repair.
1–2 hourstime
from 8,000 ₸cost

BeforeAfterWe reply during working hours
Describe your laptop model and the issue, and the technician will arrange a convenient time and place. Ask about payment options and whether the right jack is available.

Warranty question? Call us
+7 (778) 096 59 616 127 reviews of repairs at TECH SERVICE in total
Яна Э.Order No. TSA-39122 · 26 September 2024
oursВыбирал между официальным и этим, выбрал этот. Больше всего мешало: артефакты на экране. Внешне не видно, что разбирали.
Алим В.Order No. AS-8862 · 31 May 2023
oursҚыс қатты, техникасыз қиын, сондықтан тез жөндеу керек болды. Құрылғы ескі, бірақ жақсы қарайды екен. Кешігу болды, бірақ ескертті.
Анастасия Т.Order No. 36723 · 19 May 2023
oursИскал, кто работает в субботу, у нас с женой график сложный. Основная жалоба — шумит вентилятор. Работает, даже лучше прежнего.
Айша О.Order No. 2109-3587 · 9 August 2021
oursЖұмыстан кейін баруға болатын жер іздедім. Бұл жерге бірінші рет келдім. Ескі бөлшекті көрсетіп, қайтарып берді. Қосымша жұмыс қажет болды, бірақ бағаны көтермеді. Түскі үзіліске қарамастан қабылдады. Кепілдік берді, бұл маңызды. Жұмысты сол күні аяқтады. Қайта жүгінуден тартынбаймын.
Вадим Г.Order No. 85118 · 27 July 2019
oursДмитрий Радионов посмотрел и честно сказал: менять не надо. Сравнивал — здесь дешевле. Дома включил, всё на месте.
Фёдор Б.Order No. 20992 · 19 April 2019
oursСмотрел, чтобы был свой склад запчастей, а не под заказ. С этим и пришёл: артефакты на экране. После ремонта — как новое.
Олег Х.Order No. ZK-2017-442 · 28 December 2017
oursС левого берега ехать далеко, поэтому искал поближе к дому. Была мысль починить самому, но руки не дошли. Проблема ровно одна: отвалился чип. Раис Мирзахметов всё сделал при мне, за пятнадцать минут. Вышло из строя: видеочип. Приехал без записи, но свободный мастер нашёлся. Отдал 25 500 и не жалею. Спасибо, что выручили. Вернули — проверил, всё ок
Галина Ф.Order No. ZK-2017-333 · 29 October 2017
oursС левого берега ехать далеко, поэтому искал поближе к дому. Основная жалоба — отвалился чип. Тихо, ровно, без сюрпризов.
Олег Х.Order No. AS-4837 · 16 March 2017
oursВыбирал между официальным и этим, выбрал этот. Жалоба одна: отвалился чип. Нашёл Tech-service в Астане по отзывам. Работает, даже лучше прежнего.
Оксана Т.Order No. TSA-99954 · 29 January 2017
oursДруг из Сарыарки посоветовал это место. Записался на ремонт ультрабука. Жалоба одна: шумит вентилятор. Роман Мигунов отсоветовал дорогой ремонт, предложил простой. Пришлось ставить: материнская плата. За такую работу 31 500 — адекватно. Все функции проверил — работают.
experience10 yearsLaptop repair technician
experience7 yearsPC and network repair engineer
experience11 yearsSenior mobile computer technician
experience9 yearsMotherboard repair technician
experience16 yearsPrinter repair technician
Didn’t find the answer? Message us on WhatsApp.
Ask a questionIf the plug is loose, charging cuts out when you move it, or the laptop only charges in one position, the port is worn. Other signs of damage include the port heating up and the charging indicator not responding.
Sometimes yes: if the contacts are intact and the problem is oxidation or a loose fit, the technician can tighten the contacts and clean the port. If there is heavy wear or mechanical damage, the part is replaced.
A loose jack causes voltage spikes and sparking, which heats the contacts and damages the board's power circuits. If you delay the repair, you may need to restore the traces.
Yes, this can be fixed, but it requires skilled soldering and trace repair. The complexity and scope of work depend on the laptop model and the extent of the board damage.
Technically yes, but it requires soldering skills and the right tools, and inexperienced handling can easily damage the board. Without experience, it's better to let a technician do the job so you don't make the problem worse.
The connection will cut out more and more often, the port will start to heat up and spark, and voltage spikes can damage the motherboard. The sooner you show the laptop to a technician, the simpler and cheaper the repair will be.

Author: Azim K.,Laptop repair technician
Published
Updated
Tech Service replaces laptop power jacks in Astana with a technician visiting your home within 60 minutes or at our service center. Diagnostics are free, there's a 1-year warranty on labor and parts, and you can pay via Kaspi QR, Kaspi Red, bank card, cash or bank transfer for companies. The technician gives you the price after free diagnostics. We work with laptops of all brands, and our technicians have 4 to 20 years of experience.
A laptop stops charging for various reasons—the jack, the power adapter, or the battery could be at fault. Before replacing a part, it's important to figure out what exactly has failed.
A faulty power jack usually shows itself when the laptop only charges with the plug in one position or stops charging altogether. Take a close look at the port: if the charger plug wiggles, requires force to insert, or the port noticeably moves when you gently rock it, the contact is already compromised. In such cases, the charging indicator blinks, goes out when you move the cable, or doesn't light up at all. On the motherboard, these symptoms gradually worsen—first the laptop stops charging while plugged in, then it stops recognizing the adapter. The longer you put off fixing a loose port, the higher the risk of a short circuit in the power circuit and damage to the board's traces—that's no longer a jack replacement but a motherboard repair.
During free diagnostics, we check the entire power circuit step by step—the power adapter, the jack, the battery—and pinpoint the culprit instead of replacing parts at random. First, the technician measures the adapter's output voltage: a sagging or fluctuating reading points to the laptop's power adapter, not the port. Then we check the power jack itself and the contacts on the board, and test the laptop battery separately—its wear can also cause the "not charging" symptom. If the plug charges another laptop normally but the indicator on yours doesn't respond, the problem is almost certainly in the jack or contacts, not the charger. This step-by-step approach saves you money: you pay only for the part that actually failed.
Not every broken jack needs replacement—sometimes restoring the contacts is enough, but there are cases where only a new part will do. Let's look at the line between the two.
We restore contacts if the port is intact and can be tightened and cleaned, and we install a new part when the port is ripped out, cracked, or the board traces are damaged. In practice, two scenarios are most common: a loose port with weakened grip and a mechanically ripped-out jack after yanking the cable. In the first case, the technician removes the case, bends the contact tabs, and removes oxidation—this power jack repair restores normal charging without installing a new part. In the second, soldering the jack to the board is required: the old housing is desoldered, a new one is installed, and the plug fit is checked. If the part is ripped out along with the traces, simple re-soldering won't help—the conductive layer of the board must be restored first, otherwise the new component won't hold. Before agreeing to the work, ask to see the condition of the traces under a magnifying glass: cracks in the board layer are only visible that way, and they determine whether soldering alone will suffice.
| Jack type | Mounting method | What's needed for replacement |
|---|---|---|
| Cable-mounted | separate wire | case disassembly, cable replacement |
| Motherboard-mounted | soldered to the board | soldering station, temperature control |
| Combined | cable and soldered contacts | disassembly and soldering |
Replacing a jack involves disassembling the case, careful soldering, and checking charging after reassembly. Let's break down how the work on your laptop proceeds at each stage and how the result is verified.
After the work, we check charging on the spot, and if the laptop doesn't charge, we look further for the cause — in the power circuit, the power adapter, or the battery. Diagnostics are free, so we check the adapter and battery before the technician quotes the cost of work. Sometimes the old jack really was worn out, but charging fails due to damaged board traces or a power controller — then we change tactics and work on a deeper part of the circuit. Power jack replacement in Astana isn't just about installing a new part: it's important to make sure the entire power circuit works together. In my view, it's the final check under load that separates a real repair from a formal part swap. A new jack may be fine, but the problem may lie deeper, so we make checking charging with the adapter connected mandatory before handing the laptop back to the owner — that way you get a working device, not a part you have to test yourself.
You can replace the jack either at home or at the service center — the choice depends on the laptop's design and what's convenient for the client. Here's how we do it.
We travel to homes across the city and replace the power jack on site, and if the work requires a stationary setup, we repair it at the service center. We have our own specialist — he arrives with his own tools and immediately inspects the mounting spot, the board, and the cable. At home, we most often replace parts on the cable and external jacks where there's no need to disassemble the case down to the motherboard. When the contact is soldered directly to the board and the layout around it is tight, we suggest bringing the laptop to the workshop: there, soldering is done on a secured board, under good lighting, and without rushing. On-site is more convenient when you need the device urgently, but for complex cases involving board soldering, we may suggest the stationary option — that way the work is done more carefully.
A specialist arrives within 60 minutes anywhere in the city after your request to perform free diagnostics and quote the price. Diagnostics are included in the visit: he checks the connector itself, the contacts on the board, and the power circuit, then explains what exactly failed and what repair is needed. If the problem isn't the jack but the power adapter or battery, we'll tell you right away — you won't pay for unnecessary work. Residents of remote areas get the same timeframe: the visit covers the whole city, not just the center. The sooner our technician inspects the jack, the lower the risk that a loose contact will short the power circuit and damage the board — so speed of arrival here helps preserve the laptop.
After jack repair, it's important to understand what diagnostics include, what the warranty covers, and how to avoid breaking the new jack again. Let's go over the terms of work and habits that keep the jack intact.
Diagnostics are free at our shop, and the work on the connector and the part come with a 1-year warranty — this covers both the labor and the installed component. During the free diagnostics, the technician checks the jack, the contacts on the board, the ribbon cable, and the power supply to pinpoint the cause of the discharge — whether it's the jack, the battery, or the charger. Our technicians work with laptops of all brands and have 4 to 20 years of experience, so they can tell contact wear from a broken ribbon cable just by looking at the jack and the way it wobbles. If your laptop is still under the manufacturer's warranty, our repair doesn't void that warranty for other components. Before the repair, ask the technician to show you exactly which part failed — that way you'll know what you're paying for and which components remain untouched.
Here's the key info on power connector replacement: when the jack is replaced and when the contact is restored, and why being careful with the plug matters more than repair speed.
If you ask, the technician will check other parts during the same visit.

If your laptop screen is broken, turn the device off first, don't press on the display, and check the picture through an external monitor.
12 March 2026 · 11 minutes read
If your laptop freezes, the first thing to do is restart it and check Task Manager to see what's loading the CPU and memory.
25 January 2026 · 12 minutes read
If your laptop won't boot, first determine which of two states you're in: the device doesn't respond to the power button at all…
13 December 2025 · 12 minutes read
If your computer won't turn on, start simple: check the outlet, power cable, switch on the power supply, and the power button.
19 January 2026 · 13 minutes read

