Геннадий Ж.Order No. 2601-4185 · 28 October 2026
oursПозвонил в четыре места, тут ответили по-человечески. Открыл — и сразу понял: не морозит. Замена: компрессор. Сравнивал — здесь дешевле. Ни шума, ни запаха, всё штатно.
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 746 00 26Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.
Our own technicians4 to 20 years of experience




Repair prices
Note the error code from the display, the interval between shutdowns, and the temperature in the compartments — this information will help the technician arrive prepared.
refrigerant leak, clog, compressor
from5 000 ₸
thermostat, start relay, wiring
from5 500 ₸
drain, seal, cracked tray
from4 500 ₸
defrost timer, defrost heater, sensor
from5 500 ₸
compressor, fan, body vibration
from6 500 ₸
code indicates the component
from5 500 ₸
thermostat, temperature sensor, damper
from6 000 ₸
seal, hinges, body misalignment
from5 500 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1 visittime
from 4,500 ₸cost

BeforeAfter5 steps

Five steps from request to checking the refrigerator's operation.
Leave a request, the technician will coordinate the visit time and clarify the refrigerator model.
The technician arrives anywhere in the city to inspect the refrigerator on site.
The technician starts the component and measures the temperature in both compartments to ensure it works.
You approve the scope of work and parts, after which the technician begins the repair.
The technician cleans up and, if desired, hands the removed component to the owner.
We reply during working hours
The Goldstar model and serial number are on the nameplate inside the compartment or on the back wall. With them, the technician can select the part in advance.

Warranty question? Call us
+7 (778) 746 00 266 127 reviews of repairs at TECH SERVICE in total
Геннадий Ж.Order No. 2601-4185 · 28 October 2026
oursПозвонил в четыре места, тут ответили по-человечески. Открыл — и сразу понял: не морозит. Замена: компрессор. Сравнивал — здесь дешевле. Ни шума, ни запаха, всё штатно.
Наталия С.Order No. AS-4046 · 24 August 2025
oursПереезжали в новую квартиру, техника после перевозки захандрила. С утра заметил: не морозит. Сейчас пашет без нареканий.
Лариса О.Order No. AST-2503-174 · 5 February 2025
oursИскал, кто работает в субботу, у нас с женой график сложный. С этим и пришёл: намерзает лёд. Вернули — проверил, всё ок!!
Наталия С.Order No. 53082 · 25 January 2025
oursСмотрел, чтобы был свой склад запчастей, а не под заказ. Причина обращения — шумит. Дильмурат С всё сделал при мне, за пятнадцать минут. Нагрев в норме, посторонних звуков нет.
Борис В.Order No. 2502-4413 · 17 January 2025
oursЖалоба одна: шумит. Никита М сам позванил и сказал, что готово. Ни разу не пожалел.
Любовь Ю.Order No. AST-2210-389 · 11 May 2022
oursБыло важно успеть до конца недели, а то морозы обещали. Привёз на диагностику: холодильник. С чем обратился: намерзает лёд. Никита М отсоветовал дорогой ремонт, предложил простой. По деньгам вышло ровно, без сюрпризов. Перезвонили на следующий день, уточнили детали. Пришлось ставить: модуль. Ни разу не пожалел.
Инна Н.Order No. 2103-1609 · 26 May 2021
oursПричина обращения — течёт. Никита М посмотрел и честно сказал: менять не надо. Ни разу не пожалел.
Юрий М.Order No. AS-9458 · 7 May 2018
oursИскал, кто работает в субботу, у нас с женой график сложный. Заявку оставил на всякий случай, а зря время тянул. Первое, что заметил: шумит. Никита М сам позванил и сказал, что готово. Созвонились, уточнили модель, срозу сказали по запчасти. По факту меняли: модуль. Tech-service посоветовали в домовом чате. Пользуюсь и вспоминаю добрым словом.
Инна Н.Order No. 1709-5286 · 30 October 2017
oursСимптом как на ладони: шумит. Дильмурат С пообещал и сделал, без напоминаний. Работает, даже лучше прежнего.
Инна Н.Order No. AS-5681 · 20 August 2016
oursБольше всего мешало: намерзает лёд. Дильмурат С объяснял без умных слов, за это спасибо. Выбрал techservice, потому что близко к работе. Сейчас пашет без нареканий.
experience11 yearsDishwasher repair technician
experience10 yearsSenior washing machine technician
experience11 yearsStove and oven repair technician
experience11 yearsFreezer repair technician
experience16 yearsWashing machine installation technician
experience8 yearsDishwasher technician
experience12 yearsWashing machine repair technician
experience10 yearsWashing machine board repair technician
Didn’t find the answer? Message us on WhatsApp.
Ask a questionUsually the thermostat or defrost sensor is to blame: the unit isn't getting the signal that it has reached the right temperature and runs nonstop. It depends on the model, but these parts are replaced more often than the compressor.
First make sure the door closes tightly and the seal isn't coming loose, and check that the control isn't set to minimum. If there's no cold after a few hours, the problem is inside the system and you need a technician.
Check whether the refrigerator has shifted or the drain hole is clogged. If water appears again, the cause may be the door seal or the defrost system, and a technician will identify it.
Humming and clicking are often related to the start relay or compressor wear. It depends on the model: sometimes replacing the relay is enough, but if the motor is faulty, more serious repairs will be needed.
If the body is punctured or the circuit has rusted through, or if several expensive faults combine, the repair may not pay off. After free diagnostics, the technician will honestly tell you what's more cost-effective in your case.
Yes, if there's a refrigerant leak or a faulty compressor, the appliance may run overloaded and overheat. It's better to unplug it and wait for the technician so you don't make the breakdown worse.
Tech Service repairs Goldstar refrigerators in Almaty at your home or in our service center, using our own technicians. Diagnostics are free, a technician arrives within 60 minutes anywhere in the city, and we provide a 1-year warranty on labor and parts. The technician gives you the price after diagnostics, and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies.
Goldstar symptoms are rarely random—by the outward signs, a technician can narrow down the faulty components before even stepping inside. Let's go over common complaints and display codes.
If the light is on but there's no cold, the unit is receiving power, and the cause is almost always in the circuit or the component that controls the motor. The Goldstar start relay kicks on the compressor motor: if the winding is broken, it clicks but the rotor doesn't spin, and after a minute the protector opens the circuit. Meanwhile, the thermostat may "think" the temperature has been reached and not send a start command. Refrigerant is checked separately: a leak shows up as a gradual loss of cooling over several days, not a sudden failure. A multimeter is used to test the windings, temperature sensor contacts, and sensor circuit—this rules out working parts without disassembling the unit. It's best to start with the start component and thermostat: they're cheaper than the compressor and fail more often, and the technician tests them with a multimeter before recommending a motor replacement. If DIY diagnostics don't solve it, Goldstar refrigerator repair in Astana is performed by a technician after a free on-site check.
| Code | Meaning | What the technician checks |
|---|---|---|
| E1 | Fridge compartment sensor failure | Thermistor circuit, board connector |
| E2 | Freezer sensor failure | Continuity of wiring and sensor |
| E3 | Defrost heater malfunction | Heater resistance, timer |
| E4 | Evaporator fan error | Fan blade, motor winding, ice buildup |
| E5 | No signal from control board | Board power and harnesses |
| E7 | Temperature deviation in compartment | Thermostat, refrigerant leak |
The weak spots in a Goldstar depend on the model type—No Frost, drip defrost, electronic or mechanical controls fail differently. Let's break it down by component and what the technician checks first.
| Model type | Weak components | What we check first |
|---|---|---|
| No Frost | Defrost heater, evaporator fan | Ice on evaporator, airflow |
| Drip defrost | Thermostat, door seal | Shut-off cycle, door fit |
| Electronic control | Control board, sensors | Error codes, board connectors |
| Mechanical thermostat | Thermostat, start relay | Thermostat contacts, motor startup |
On our Goldstar service calls, the start relay and thermostat fail noticeably more often than the compressor, so the technician rules them out first before talking about the motor. The start component is responsible for engaging the winding, and the thermostat opens and closes the contact based on temperature — both wear out from constant on-off cycles. The compressor fails less often, and its failure is confirmed by measuring winding resistance with a multimeter and checking the starting current. Moreover, the pattern of "click — silence — click" usually points to the start component, not the motor. This part is cheap compared to the compressor, but it's the one that most often causes clicking on startup — don't agree to a motor replacement until the start assembly has been checked. Our technicians have worked with Goldstar for 4 to 20 years and can often identify the culprit by the sound of startup before even opening the unit.
After a power surge, Goldstar models with electronic controls usually suffer damage to the board's power supply first, while mechanical models typically get away with a burnt-out thermostat. The surge punches through the input stage, varistor, and fuse, and an error appears on the display or the fridge doesn't turn on at all. Mechanical models have minimal electronics, so the thermostat contacts take the hit — they burn and stop closing the circuit. The technician opens the control board and tests the input stage with a multimeter before giving a verdict on the board. If the fridge is completely dead after a surge, don't rush to replace the board — first check the fuse and input stage, as often that's all it takes. The varistor is replaced together with the fuse, otherwise the next surge will damage the electronics again.
Diagnostics for Goldstar is a step-by-step elimination of components, not guesswork based on symptoms. Here's what the technician actually does, in what order they check the circuit, and why this work is free for you.
Our technicians follow the circuit from simple to complex: first they test the start component and thermostat, then check the motor windings, and only then draw a conclusion about the motor. The start relay costs pennies compared to the power unit, and the symptoms of failure are similar — the fridge clicks but doesn't start. A multimeter shows the winding resistance: if the numbers are normal, the motor is fine, and the cause is in the start relay, thermostat, or wiring. Next, they check the capillary tube and circuit pressure — a clog produces the same signs as a failing power unit. This order protects the customer from unnecessary replacements: if the start relay is fine but the motor won't start, a verdict to replace the unit without checking the circuit would be premature.
If the windings are intact, we restore the power unit; if there is an interturn short circuit or a jam, we replace it — the decision is made after checking the circuit and pressure in the loop. The technician measures the winding resistance, evaluates the starting current, and checks whether the system holds refrigerant. If the motor works but there is no cooling, they look for a leak or a clog in the capillary tube — sometimes it's enough to clean the circuit and recharge the refrigerant. When replacing the unit, the circuit must be vacuumed with a manifold gauge station before charging: without vacuum, moisture and air in the system kill the new unit within weeks. Replacing the power unit is the most expensive job in Goldstar servicing, so the technician must show you the measurement results before approval, not just announce a verdict.
Most Goldstar breakdowns are fixed at home, but some jobs require a workshop. Let's look at when a home visit is needed and when the unit is taken to the service center, and how the request process is organized.
At home, we restore the start relay, thermostat, sensors, seal, control board, and most work with the circuit, while equipment is taken to the service center when compressor replacement or pipe soldering in stationary conditions is needed. Goldstar refrigerator repair in Astana is more often done at home, and only some jobs require a workshop. The start relay and thermostat are replaced in one visit right in the kitchen — a power outlet and access to the back panel are enough. The control board is removed, checked with a multimeter, and replaced on site if the new part is available. Compressor replacement requires vacuuming the system and charging refrigerant — such operations are done only in a workshop with stationary equipment. Pipe soldering is also a stationary job: the required circuit cleanliness cannot be ensured at home. If the specialist during diagnostics says the work can be done on site, there is no need to transport the unit — this saves you a day without the appliance and eliminates the risk of damage during transportation.
Most Goldstar jobs at home take one visit, and the time depends on which part is being replaced and whether it is available. Replacing the start relay or thermostat takes 20-30 minutes after a short diagnostics. The control board and seal require a bit more time for disassembly and reassembly, but everything fits into one visit. If the necessary part is not available, the specialist will arrange a second visit with you — do not leave the equipment disassembled, ask to reassemble it before the visit with the part. After compressor replacement at the service center, cooling and thermostat operation are checked before returning the unit. In our practice, the longest wait is for a rare board for a specific model — the work itself takes less time than delivering the part.
There are many contractors in Astana, but not everyone knows the specifics of Goldstar. Let's look at what to check in the warranty and what questions to ask a specialist before calling.
We give a 1-year warranty on both labor and parts — if the same issue comes back after a Goldstar service, the technician will return under warranty. This covers the full scope of work: replacing the start relay, thermostat, compressor, and other components. Our technicians have 4 to 20 years of experience, and over that time they've worked on dozens of Goldstar models with different control systems. The parts warranty matters more than it seems: a faulty relay or thermostat doesn't always show up right away, and without a warranty you'd pay for a second visit. Before you book, ask whether the promise covers just labor, just the part, or both — saying "there's a warranty" without details means nothing. One more thing: ask them to put the warranty period in writing specifically for the start relay and thermostat — these components are the first to fail.
Tech Service is a direct contractor with its own technicians, not an aggregator: you work directly with the person who will do the job, and they provide the warranty. With an aggregator, one person takes the request and another shows up — with different tools and different accountability. With a direct contractor, there's no one else to file a warranty claim with, and that keeps things disciplined: the technician has a stake in making sure the component lasts the entire warranty period. Our technicians arrive within 60 minutes anywhere in the city, diagnostics are free, and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. For Almaty residents, it's worth asking who exactly will come before you book — it saves time and hassle. Also ask whether the contractor warrants the visit itself and a follow-up diagnostic if the issue returns.
Goldstar refrigerator repair follows a clear logic: read the symptom correctly, check simple components before complex ones, choose the right format for the work, and get the warranty in writing. Below is a short summary to help you make a balanced decision.
90brands
We work with every brand sold in Kazakhstan — from Samsung, LG and Atlant to Biryusa, Indesit, Stinol and rare imported makes. Can’t find yours in the list? Call anyway — a technician will come and take a look.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
If your refrigerator isn't cooling but the light is on, the cause is usually one of the components in the cooling circuit: the compressor, thermostat…
10 December 2025 · 13 minutes read
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read












