Open until 19:00+7 (778) 096 59 61Call a technician
Tech Service technician next to a juicer

Juicer Repair in Astana

A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.

  • 1-year warranty
  • Arrival within 60 minutes
  • Free diagnostics

Our own technicians4 to 20 years of experience

Kairat A.Ruslan S.Nikita O.Kuanysh A.

Repair prices

  • Diagnostics0 ₸
  • Bearing replacementfrom3 000 ₸
  • Motor replacementfrom4 000 ₸
  • Power circuit repairfrom4 500 ₸
  • Leak repair (seal replacement)from5 500 ₸
All prices
ours5,06 127 reviews
order database
Common faultsCommon faultsTECH SERVICE02

Common juicer faults in Astana

Eight common symptoms and their causes, from simple to complex. The technician will pinpoint the exact issue during free diagnostics.

PricesPricesTECH SERVICE03

How much juicer repair costs in Astana

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Bearing replacementparts not included

1–2 days

from3 000 ₸

Motor replacementparts not included

1–2 days

from4 000 ₸

Power circuit repairexact price — after the free diagnostics

1–3 hours

from4 500 ₸

Leak repair (seal replacement)parts not included

1–3 hours

from5 500 ₸

Motor brush replacementparts not included

1–2 days

from6 000 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after juicer repair in Astana

Bowl retaining clip broke

1–2 hourstime

from 6 000 ₸cost

Problem
The citrus juicer stopped starting: the cone would not spin, although the bowl was in place.
What we did
The technician replaced the bowl retaining clip with its axle and checked startup.
Result
The juicer starts, the cone spins, and the bowl stays in place.
I want the same
On the workshop bench, a juicer with a transparent bowl, a technician installs a new retaining clip on the axle at the side of the housing, and the old clip lies nearby on the matBeforeAfter
01 / 03
All repairs
TECH SERVICE mobile technician with a tool case

How juicer repair works at your home in Astana

Five steps from request to performance check.

  1. Requestsame day

    Describe the symptom and model — the technician will prepare for the visit and bring the right tools.

  2. Technician visitwithin 60 minutes

    A technician arrives within 60 minutes anywhere in the city, bringing tools and test equipment.

  3. Preparing the spacebefore work

    The technician checks where the appliance is, whether a table and outlet are available, and what to prepare for disassembly.

  4. Choosing a parton site

    The technician helps choose an original or equivalent part for the specific unit and checks compatibility by model.

  5. Performance checkafter reassembly

    A test run with juice, checking vibration and leaks — the technician makes sure the unit works properly.

Leave a request

We reply during working hours

Book juicer repair in Astana

Describe the symptom and your juicer model — the technician will arrive with tools. Arrival within 60 minutes, free diagnostics, 1-year warranty.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 096 59 61
Customer reviewsReviewsTECH SERVICE05

Reviews of juicer repair in Astana

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Маргарита П.Order No. AST-2602-615 · 14 October 2026

ours

Искал, кто работает в субботу, у нас с женой график сложный. Проблема ровно одна: течёт. Полёт нормальный.

Repair: juicer repair in

Римма Х.Order No. ZK-2026-227 · 7 March 2026

ours

Смотрел, чтобы был свой склад запчастей, а не под заказ. Ни с того ни с сего — течёт. Радик Т не пропал после ремонта, помог с настройкой. Позвонил, объяснил, сказали подъезжать — примут без записи. По факту меняли: фильтр. Внешне не видно, что разбирали!!

Repair: juicer repair in

Геннадий Ж.Order No. 2512-5434 · 25 October 2025

ours

В Астане с сервисами беда, поэтому выбирал по отзывам. Было ощущение, что попал на замену целиком. Основная жалоба — не крутит. Радик Т всё сделал при мне, за пятнадцать минут. 15 000 за работу и деталь, считаю нормально. Обошлось заменой: редуктор. На ресепшене оформили за пару минут, выдали квитанцию. Сейчас пашет без нареканий.

Repair: juicer repair in

Альбина Ю.Order No. 33719 · 24 July 2024

ours

Позвонил в четыре места, тут ответили по-человечески. Позвонил насчёт соковыжималки. Первое, что заметил: течёт. Радик Т объяснял без умных слов, за это спасибо. Цену держали до конца, молодцы. Внутри оказалось: редуктор. На ресепшене оформили за пару минут, выдали квитанцию. Скажу знакомым. Тихо, ровно, без сюрпризов.

Repair: juicer repair in

Георгий З.Order No. AS-4935 · 19 April 2024

ours

Знакомый мастер раньше здесь работал, дал номер. Причина обращения — не крутит. Полёт нормальный.

Repair: juicer repair in

Яна Э.Order No. 2307-1199 · 27 November 2023

ours

Основная жалоба — вибрирует. Радик Т — мастер от бога, если можно так сказать. Дома включил, всё на месте.

Repair: juicer repair in

Вера Э.Order No. TSA-72766 · 11 May 2023

ours

Смотрел, чтобы был свой склад запчастей, а не под заказ. Больше всего мешало: не крутит. Ни разу не пожалел.

Repair: juicer repair in

Римма Х.Order No. 28806 · 2 October 2022

ours

Было важно успеть до конца недели, а то морозы обещали. С утра заметил: течёт. Работает, даже лучше прежнего)

Repair: juicer repair in

Дана И.Order No. 2212-2639 · 22 September 2022

ours

Қыс қатты, техникасыз қиын, сондықтан тез жөндеу керек болды. Құрылғыны әкелдім, бірден қабылдады. Қосымша жұмыс қажет болды, бірақ бағаны көтермеді. Кепілдік берді, бұл маңызды. Рахмет, ұсынамын)

Repair: juicer repair in

Георгий З.Order No. TSA-43135 · 3 December 2021

ours

Было важно успеть до конца недели, а то морозы обещали. Ремонт соковыжималки заказывал впервые. Первое, что заметил: не крутит. Радик Т принял без вопросов, хотя был без записи. Мастер сам предложил забрать технику на следующий день. Ни копейки больше обещанного. Пришлось ставить: фильтр. Достойно сделали. Сейчас пашет без нареканий!!

Repair: juicer repair in

Our technicians in Astana

01 / 08
Kairat A., senior small appliance technicianexperience14 years

Kairat A.

Senior small appliance technician

Ruslan S., on-site coffee machine diagnostics technicianexperience15 years

Ruslan S.

On-site coffee machine diagnostics technician

Nikita O., coffee machine cleaning technicianexperience5 years

Nikita O.

Coffee machine cleaning technician

Kuanysh A., coffee machine diagnostics technicianexperience12 years

Kuanysh A.

Coffee machine diagnostics technician

Aydar A., portafilter coffee machine technicianexperience5 years

Aydar A.

Portafilter coffee machine technician

Serikbay A., vacuum cleaner repair technicianexperience12 years

Serikbay A.

Vacuum cleaner repair technician

Artur G., vacuum cleaner repair technicianexperience15 years

Artur G.

Vacuum cleaner repair technician

Akzhol K., washing machine repair technicianexperience18 years

Akzhol K.

Washing machine repair technician

Questions and answersQuestionsTECH SERVICE06

Questions about juicer repair in Astana

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Can a centrifugal juicer be repaired if the basket is cracked?

Yes, most often the basket and sieve holder are replaced with new ones — this is one of the typical breakdowns of centrifugal models. Whether replacement is possible depends on the model and parts availability; the technician will give you the exact option after free diagnostics.

Do you repair masticating juicers if the plastic gear is broken?

Yes, the gear in the reducer is replaced, and this is one of the most common reasons why the auger stops turning. Sometimes other reducer parts are checked along with it to prevent the breakdown from happening again.

Why is it dangerous to keep using a juicer that sparks and smells burnt?

Sparks and a burnt smell indicate problems with the motor or wiring, and it's dangerous to keep using the appliance. It's best to unplug it immediately and not turn it on until a technician inspects it.

Can I reset the error code on the juicer myself?

Sometimes unplugging the appliance for a few minutes helps, but it doesn't fix the cause if there's a real problem. Error code meanings vary by brand, so it's better to show the appliance to a technician — they'll determine what exactly triggered it.

Do you repair juicers of well-known brands at home in Astana?

Yes, a Tech Service technician comes to your home anywhere in the city and repairs juicers of popular brands on site. If the breakdown is complex and requires service, they'll tell you honestly after free diagnostics.

What does the technician check during juicer diagnostics?

They inspect the housing and components, check the motor, reducer, wiring, and seals to find the real cause of the breakdown. Diagnostics are free, and based on the results, the technician explains what needs to be replaced and why.

Repair guideArticleTECH SERVICE07

Juicer repair in Astana by Tech Service with on-site technician

Kairat A., senior small appliance technician

Author: Kairat A.,Senior small appliance technician

Published
Updated

Tech Service repairs juicers in Astana as a direct contractor: our technician comes to your home or picks up the appliance for service. Diagnostics are free, on-site visits across the city within 60 minutes, and a 1-year warranty on labor and parts. Technicians with 4 to 20 years of experience fix centrifugal, masticating, and citrus models.

Why your juicer stopped working and what to check before calling a technician

A juicer doesn't break suddenly—there's almost always a symptom that tells the technician where to look before disassembly. Below are the six most common complaints and the causes behind them.

Juicer won't turn on or the disc won't spin

The juicer won't turn on or the disc won't spin. If the appliance doesn't respond to the button, we first check the power supply and overheating protection, then the motor—in half of the cases, the culprit isn't the motor but the cord, plug, or a tripped thermal protector. The electric motor drives the cutting disc in centrifugal models and the auger in masticating ones; startup goes through the power button and cord. During free diagnostics, the technician tests the circuit, inspects the plug and switch, and checks whether the overheating protection has tripped after overload. Humming without rotation almost always indicates a jammed gearbox or worn plastic gear, not a burnt-out motor, so don't write off the appliance just yet: with this symptom, it's enough to disassemble the unit and replace the worn part without replacing the motor. Our technician starts juicer repair in Astana with this check—it helps avoid false conclusions about the motor.

Leaking from the bottom, noisy, overheating, or showing an error code

SymptomLikely causeWhat the technician checksAt home or in the shop
Leaking from the bottom or bodyWorn gasket, crack in the juice collectorSeals, body integrityAt home
Very noisy and vibratingCrack in the basket, imbalanceWorking basket, disc seatingAt home
Overheating and shutting offOverload, clogged sieve, motor wearSieve, motor winding, thermal protectionIn the shop
Humming but not spinningGearbox, plastic gearGearbox, gears, augerIn the shop
Won't turn onCord, plug, button, thermal protectionPower, switch, motorAt home
Shows an error codeSensor or control boardElectronics, sensorsIn the shop

What you can check yourself before the technician arrives

  • Power: make sure the plug is firmly in the outlet and the cord isn't pinched by furniture; a loose contact or pinched wire can cause malfunctions and overheating.
  • Thermal protection: let the appliance cool for 15–20 minutes and turn it on again without load; if it works, the overheating protection tripped, not a breakdown.
  • Assembly: ensure the basket, sieve, and lid are clicked into place—otherwise the lock will prevent startup; check each part's seating one by one.
  • Loading: don't fill the basket above the mark on the wall and cut large fruits; excess mass strains the motor and reduces extraction.
  • Error code: check the manual—some codes reset when you turn the appliance back on, but if the code returns, it points to a component; note the number before the technician's visit.

What goes wrong with each type of juicer

Centrifugal, masticating, and citrus models are built differently, so they break in different ways: each design has its own weak points and typical failures. Let's look at what to watch for and which breakdowns are most common.

Centrifugal juicer and its weak points

For centrifugal models, we most often replace the working basket and the grating disc: when the basket is unbalanced or cracked, the machine starts to vibrate and jump across the table. The stainless steel basket spins on the motor shaft at high speed, and any deformation of the mesh immediately causes wobble. The grating disc gets dull from hard fruits and stops grinding the pulp, so the extraction becomes jerky and the load on the motor increases. Vibration gets worse if the appliance stands on an uneven surface or a piece of pulp gets under the basket. The weak points of the centrifugal design are the basket-to-shaft mount and the mesh itself: thin metal eventually cracks along the weld seam. A crack in the basket is easy to mistake for a loose motor, but if vibration appears suddenly after a hard fruit gets in, the cause is almost always the basket — check it before taking the motor apart. Inspect the weld seam and the seat on the shaft to catch a crack in time.

Auger juicer and gearbox

In auger models, the most vulnerable part is the gearbox and plastic gears: if a hard piece gets in or there's an overload, the gear strips and the auger stops turning. The gearbox transfers force from the motor to the auger and works under constant load, especially with carrots, beets, and frozen fruits. Vibration in an auger juicer usually means the auger is misaligned or the shaft bearing is worn, not a motor failure. If the appliance hums but the auger doesn't move, we check the gear engagement and the condition of the shaft. The plastic gear is deliberately made the weak link — it breaks before the motor burns out, so replacing the gear costs less than replacing the motor, and there's no need to replace the whole assembly if the shaft is fine. Practical tip: don't overload the appliance with hard pieces, let the auger work smoothly, and if vibration appears, immediately check the auger alignment and the shaft bearing.

Citrus and combination juicer

  • Citrus press: the lever and cone wear out, and the motor weakens from frequent pressing of dense fruits and long continuous pressing; take breaks between cycles.
  • Combination: one of the sections breaks, while the other may remain fully functional and continue to do its job, so diagnosing each part is important.
  • For hard fruits: the gearbox and grating disc suffer from overload, large pieces, and operation without a pusher; cut fruits smaller and feed them gradually.
  • For soft fruits: the sieve gets clogged, the load on the motor increases, juice yield drops, and a humming noise appears; rinse the sieve more often.

Repair at home or at the service center

Not every breakdown needs to be taken to the workshop — some faults can be fixed right at your place, while others require disassembly and replacement of components. Here's how we divide these cases and what to check before the visit to avoid overpaying for diagnostics.

What can actually be fixed at home

At home, we fix leaks, replace gaskets and seals, check the power supply, the power button, and the overheating protection — anything that doesn't require fully disassembling the housing. Most often, a call is about a leak at the juice collector joint: the old gasket hardens, stops sealing, and juice runs onto the table. On site, the technician removes the lid, inspects the seat, and installs a new seal. We check the button and thermal protection with a continuity test: if the contact is burnt or the protection has tripped falsely, the component is replaced without transporting the appliance. In my opinion, many requests in Astana are solved exactly this way — on site, without transporting the appliance. If replacing the gasket doesn't help and the leak persists, the cause is deeper — a crack in the juice collector, and then the appliance will still have to be taken to the service center. Practical tip: before the technician arrives, wipe the joint dry and mark where the moisture appears — this will speed up diagnostics, and the technician will bring the right seal right away.

When service center repair is needed

Replacing the motor, gearbox, plastic gears, and working basket requires disassembly and on-site inspection—we do this kind of work in the workshop. On screw models, the electric motor can only be removed after taking off the housing and gearbox, and the plastic gears are only accessible from inside the unit. The working basket of a centrifugal juicer is replaced together with the mount: a bent shaft due to bearing wear isn't visible from the outside, but it's exactly what tears the new basket. At the service center, the technician checks the shaft for runout, the condition of the bearings, and how the gears fit—without this, replacing the part won't help. The motor and gearbox are installed only after the other components have been checked; otherwise, the new part will quickly fail for the same reason as the old one. So don't replace the unit blindly: diagnosis first, then repair—this way you avoid repeated disassembly and extra costs.

How to book a technician at a time that suits you

  • Request: a juicer service technician in Astana takes requests by phone or message—describe the symptom so they immediately understand what they're dealing with and prepare the right tools.
  • Visit: anywhere in the city, the technician reaches your address within 60 minutes of confirming the request.
  • Diagnosis: on site, they identify the cause of the breakdown free of charge and agree on the list of work with you, so you know the scope and sequence in advance.
  • Next: minor repairs are done on site, while complex ones are taken to the service center right after diagnosis—you don't need to bring it in yourself.

How diagnosis and repair work

Restoration starts with diagnosis, not disassembly. The specialist identifies the cause of the malfunction, agrees on the list of work and the cost, and only then picks up tools—this order protects you from replacing working components and extra costs.

What free diagnosis includes

Diagnosis is free: we check the power supply, motor, gearbox, basket, and seals to name the exact cause rather than replace parts at random. First, we test the power circuit and the power button—a break in the cord or a burnt contact can mimic motor failure, so it's important to check the entire circuit up to the motor, not just the motor itself. Then the electric motor: winding resistance, brushes, starting torque. On screw models, the gearbox is checked separately—crunching and shaft play indicate gear wear, while the lubricant and bearing condition help clarify the degree of wear. The working basket is inspected for cracks and deformation, the gaskets and seals for hardening and tears, the sieve for clogged cells. Accurate diagnosis saves money: sometimes a "burnt-out motor" turns out to be a clogged sieve, and no motor replacement is needed at all. As a result, we explain which component failed and why.

How repair is agreed and performed

After diagnosis, we state the cause and scope of work, agree them with the client, and only then replace worn components and parts. No hidden operations: the agreement includes the list of parts to be replaced and a description of work on the housing, drive, or basket mount. The owner sees what they're paying for and can decline any item before work begins. The specialist gives the cost after free diagnosis—quoting a sum before that would be unfair, since the cause may be simpler or more complex than expected. The replacement of worn components and parts itself follows the agreed list, without "incidental" extras. We work on the component that failed, not disassemble the whole appliance just to look busy. This order is convenient for the owner too: they know in advance what operations are coming, so they can plan their time and avoid unexpected extra charges during repair.

Checking the work after repair

Performance check after repair Before handing the juicer back, we test it: we turn it on, run it with a test load, and make sure there are no leaks, vibration, or overheating. Just turning it on isn't enough: at idle the unit may spin smoothly, but under load it can leak at the body seam or the seal. A test load simulates real juicing, checking all connections under juice pressure. Vibration is monitored separately: excessive shaking indicates an unbalanced basket or loose fasteners, and it must be fixed before pickup. Overheating is checked by the motor housing temperature after the run. Testing under load reveals hidden defects—for example, a leak under pressure that isn't noticeable when simply turning it on. Practical tip: before testing, make sure the seal is seated evenly and fasteners are tight—this reduces the risk of false leaks and vibration. Only after a successful run is the unit returned to the owner, and the 1-year warranty on labor and parts secures the result.

Warranty and what to do if the problem comes back

A warranty isn't a formality but a commitment to specific work and parts. Here's what it covers, what it means for the technician, and what to do if the problem returns: document your request and keep your paperwork.

What the 1-year warranty covers

We provide a 1-year warranty on labor and parts—if a replaced component fails or a fixed issue reappears within that period, we'll take care of it under warranty. The commitment covers exactly the parts and operations the technician performed: replacement of worn components, gaskets, the auger model's gearbox, the power button. If the same element fails again a few months later, we cover the repeat work and part, so keep the service report—it makes it easier to confirm what was replaced. The warranty doesn't turn into indefinite maintenance for the entire juicer—it's tied to the specific intervention. That's why it's so important to establish the cause during free diagnostics rather than guessing: then, in a warranty case, it's clear which component to check and replace. In my view, an honest statement about a year on labor and parts answers more questions than general promises and keeps the technician accountable—they're responsible for the result, not just the visit.

What to do if the juicer leaks again

If the leak returns after service, we revisit the cause—most often it's not the replaced gasket but a crack in the housing or juice collector that wasn't visible at first. Gaskets and seals keep juice inside the housing, but with a microcrack or misaligned seating, liquid finds a path around them. So on a repeat visit, the technician checks not only the replacement seal but also the geometry of the juice collector, how tightly the lid fits, and the condition of the fasteners. If you're in the capital, just describe when it leaks—during juicing, washing, or idle: that significantly narrows the search. A repeat leak in the same spot is a signal to check the seating of all seals, not just the replaced one, otherwise the problem will keep coming back. Neglecting neighboring seals often leads to returns—the part is new, but it still leaks. Practical tip: before handing it in, describe all leak points and include a photo of the lid seating—it helps the technician find the cause faster.

Payment and acceptance of work

  • Payment: we accept Kaspi QR, Kaspi Red, card, cash or bank transfer convenient for the client—settled on the spot without extra steps, bank trips, or waiting for confirmation.
  • Check: the equipment is turned on and run with a test load to ensure no leaks, vibration, or overheating; it's best to be present during the check and ask questions right away.
  • Warranty: 1 year on labor and parts—a commitment to the specific work performed and parts replaced, so keep your documents.
  • Questions: if anything is unclear after service, the technician explains which components were replaced and why—this helps you understand the cause of the issue.

Repair or buy a new juicer

When the breakdown is serious, the question arises: repair or replace? The decision depends on the component, the model, and which other part might fail in the coming season, so weigh the repair cost and parts availability.

When repair makes sense

Restoration makes sense when a single component fails—a gasket, gear, button, or basket—while the motor and housing remain in working order. Replacing worn components and parts of the juicer in such cases gets the appliance back in service: new gaskets and seals restore tightness, plastic reduction gears transmit force without slipping again, and a working basket maintains balance during spinning and doesn't hit the shaft. Our technicians with 4 to 20 years of experience most often replace these wear parts—they wear out first with regular use, while the electric motor and housing last noticeably longer. If diagnostics show only one component is worn, replacing the part gets the appliance back in service, whereas a new model would require the full amount—and the old housing and motor will still serve for more than one season. Practice shows: timely replacement of wear parts extends the juicer's service life and maintains its usual operation.

When it's easier to buy a new one

Buying a new juicer is wiser when several key components are worn at once—motor, gearbox, and housing simultaneously. An electric motor with burnt windings, a slipped gearbox, and a cracked juice collector add up to such a set of replacements that restoration loses its point: the appliance has already served its life, and the next breakdown will follow the first. Signs of this condition are the smell of burnt insulation after switching on, metallic grinding under load, cracks in the plastic near the housing mounts, and shaft play. The longer you delay a decision with this combination of symptoms, the higher the risk that the next start will cause a short circuit or shaft seizure. Moreover, even with a serious breakdown, it's worth getting a free diagnostic first—sometimes 'several components' turn out to be one part causing the other symptoms, and then replacement solves everything without buying new equipment. Rushing to buy in such a situation costs more than one visit from a technician.

Prevention so the juicer doesn't break down

  • Rinsing: immediately after spinning, rinse the sieve and working basket, don't let juice dry in the holes and on the mesh, otherwise hardened fibers clog the cells and reduce juice yield.
  • Loading: feed fruit gradually, don't fill the basket to the brim—the motor doesn't like jerks and overload, and even feeding maintains speed and protects the shaft from impacts.
  • Hard fruits: cut large and hard fruits into pieces before loading to avoid overloading the disc and shaft and prevent housing vibration.
  • Drying: after washing, dry the components so moisture doesn't accumulate in seals and bearings, causing corrosion and seizure.
  • Pauses: let the appliance cool between long spins—overheating shortens the motor winding's life, take a break after each cycle.

Juicer repair and what to keep in mind

We've covered the key points that determine the outcome of a juicer repair: from accurate diagnostics to choosing between a technician visiting your home and bringing the unit into the shop. Describe the problem in advance so the technician arrives prepared and the repair doesn't drag on.

  • The symptom points to the cause: a leak, vibration, overheating, or an error code indicates a specific component, not the entire appliance, so it's important to pinpoint the source of the failure first.
  • The type determines the breakdown: centrifugal juicers suffer from basket issues, auger juicers from the gearbox, and citrus juicers from the lever and motor, so the design itself hints at the likely weak spot.
  • Home or shop: minor work can be done on-site, but replacing the motor or gearbox requires disassembly in a workshop with the right tools and access to the components.
  • Diagnostics come first: an accurate diagnosis saves money and prevents replacing working parts, reducing the risk of repeat repairs.
  • Warranty and care: a 1-year warranty on labor and parts plus regular cleaning extend the juicer's life and maintain its performance.

34brands

Which juicer brands we repair in Astana

We source parts by model and part number. Choose a brand to see what we work with.

We also repairWe also repairTECH SERVICE08

Besides juicer repair, we fix other equipment in Astana

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE09

Worth reading before juicer repair in Astana

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp