Open until 19:00+7 (778) 096 59 61Call a technician
Tech Service technician next to a hoverboard

Hoverboard Repair in Astana

Technician visit within 60 minutes across the city. Free diagnostics.

  • 1-year warranty on labor and parts
  • 4 to 20 years of experience
  • Kaspi QR, Kaspi Red, card, cash, or bank transfer

Our own technicians4 to 20 years of experience

Kairat A.Ruslan S.Nikita O.Kuanysh A.

Repair prices

  • Diagnostics0 ₸
  • Contact solderingfrom2 000 ₸
  • Calibration and balancingfrom2 500 ₸
  • Lighting replacementfrom2 500 ₸
  • Battery replacementfrom3 500 ₸
All prices
ours5,06 127 reviews
order database
Common faultsCommon faultsTECH SERVICE02

Common hoverboard faults in Astana

Symptoms owners most often report. The cause in each card is listed from most likely and simple.

PricesPricesTECH SERVICE03

How much hoverboard repair costs in Astana

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Contact solderingexact price — after the free diagnostics

1–2 days

from2 000 ₸

Calibration and balancingexact price — after the free diagnostics

1–3 hours

from2 500 ₸

Lighting replacementparts not included

1–3 hours

from2 500 ₸

Battery replacementparts not included

1–2 hours

from3 500 ₸

Power button replacementparts not included

1–2 hours

from3 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after hoverboard repair in Astana

Play and knocking in the steering column

1–2 hourstime

from 2,000 ₸cost

Problem
The hoverboard developed play and knocking in the steering column when turning the handlebar due to worn bushings.
What we did
The technician replaced the steering column bushings and adjusted the assembly.
Result
The steering became smooth, without knocking; the technician checked the controls on site.
I want the same
A black hoverboard with a steering column stands on a workbench in a workshop, a technician's hand in an orange sleeve rests on the wheel housing.BeforeAfter
01 / 03
All repairs
TECH SERVICE mobile technician with a tool case

How hoverboard repair works at your home in Astana

From request to performance check — five clear steps.

  1. Requeston the day of request

    Describe the symptom and model — the technician will prepare for the visit.

  2. Technician visitwithin 60 minutes

    The technician comes anywhere in the city, visit time is agreed in advance.

  3. Work approvalbefore repair

    The technician specifies which parts are needed and what to clarify about the model.

  4. Repair and paymentafter work

    Payment is made after the work is done, using a convenient method.

  5. Check and warrantyafter repair

    You check the work, 1-year warranty on labor and parts applies.

Leave a request

We reply during working hours

Book hoverboard repair in Astana

Specify the model and symptom in your request so the technician brings the right parts.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 096 59 61
Customer reviewsReviewsTECH SERVICE05

Reviews of hoverboard repair in Astana

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Леонид П.Order No. 81003 · 28 October 2026

ours

Дмитрий Радионов посмотрел и честно сказал: менять не надо. Нашёл Tech-service в Астане по отзывам. Внешне не видно, что разбирали

Repair: hoverboard repair in

Константин О.Order No. AS-7880 · 27 July 2025

ours

Максим Снегирев объяснял без умных слов, за это спасибо. Итог — 35 000 тенге, ничего сверху. После ремонта — как новое.

Repair: hoverboard repair in

Василий Е.Order No. TSA-66266 · 6 July 2025

ours

Максим Снегирев посмотрел и честно сказал: менять не надо. Проверил на всех режимах — держит.

Repair: hoverboard repair in

Денис Л.Order No. 2512-3995 · 10 April 2025

ours

Позвонил в четыре места, тут ответили по-человечески. В работе было: гироскутер. Основная жалоба — дёргаеться. Диагностику провели при мне, ничего не унесли в подсобку. Смета — 6 500, чек дали. Ни шума, ни запаха, всё штатно.

Repair: hoverboard repair in

Любовь Ю.Order No. 2501-1973 · 26 February 2025

ours

Основная жалоба — дёргается. Дмитрий Радионов отсоветовал дорогой ремонт, предложил простой. Разъёмы на месте, ничего не люфтит.

Repair: hoverboard repair in

Виолетта Д.Order No. ZK-2025-370 · 23 February 2025

ours

Офис на Кабанбай батыра, технику туда и повёз. Уже представлял, как объясняю домашним, что техника всё. Симптом как на ладони: не включается. Максим Снегирев сам позвонил и сказал, что готово. Нужна была новая деталь: плата. Функционирует, тьфу-тьфу

Repair: hoverboard repair in

Юрий М.Order No. TSA-10469 · 1 June 2024

ours

Заявку оставил через сайт вечером, утром перезвонили. Скепсис был, признаю. Проблема ровно одна: не включается. Выдали номер заказа и сказали, как отслеживать. Вышло из строя: датчики. Выбирал по карте, Tech-service был ближе всех. После ремонта — как новое.

Repair: hoverboard repair in

Елизавета Л.Order No. 2308-8488 · 13 May 2023

ours

Позвонил в четыре места, тут ответили по-человечески. С чем обратился: не включается. После ремонта — как новое!!

Repair: hoverboard repair in

Константин О.Order No. AST-2212-931 · 25 March 2022

ours

Основная жалоба — не включается. Максим Снегирев посмотрел и честно сказал: менять не надо. Третий месяц — никаких проблем.

Repair: hoverboard repair in

Ангелина Я.Order No. AS-4375 · 6 January 2022

ours

Живу в Есиле, искал сервис, чтобы не тащиться через весь город. Проблема ровно одна: не включается. Нашёл Tech-service в Астане по отзывам. Тихо, ровно, без сюрпризов.

Repair: hoverboard repair in

Our technicians in Astana

01 / 08
Kairat A., senior small appliance technicianexperience14 years

Kairat A.

Senior small appliance technician

Ruslan S., on-site coffee machine diagnostics technicianexperience15 years

Ruslan S.

On-site coffee machine diagnostics technician

Nikita O., coffee machine cleaning technicianexperience5 years

Nikita O.

Coffee machine cleaning technician

Kuanysh A., coffee machine diagnostics technicianexperience12 years

Kuanysh A.

Coffee machine diagnostics technician

Aydar A., portafilter coffee machine technicianexperience5 years

Aydar A.

Portafilter coffee machine technician

Serikbay A., vacuum cleaner repair technicianexperience12 years

Serikbay A.

Vacuum cleaner repair technician

Artur G., vacuum cleaner repair technicianexperience15 years

Artur G.

Vacuum cleaner repair technician

Akzhol K., washing machine repair technicianexperience18 years

Akzhol K.

Washing machine repair technician

Questions and answersQuestionsTECH SERVICE06

Questions about hoverboard repair in Astana

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Can a hoverboard be fixed at home, or does it need to be brought to a service center?

The technician can do a lot right at your place: diagnostics, calibration, replacing the power button, charging port, or battery. The hoverboard is taken to the shop when complex board soldering or a motor-wheel replacement is needed. The exact option is determined by the technician after inspection.

How can you tell what's wrong with a hoverboard that won't turn on?

First, the battery charge and power button are checked, and only then the board. If the battery shows voltage but the hoverboard stays silent, the cause is more often in the control board. The technician will tell you for sure after free diagnostics; it depends on the model.

Why does the hoverboard beep and flash red when turned on?

This is how the hoverboard signals an error: most often it's a low battery, calibration failure, or a faulty sensor. The interpretation of the signals depends on the model, so there's no universal code. The technician will read the error and name the cause after inspection.

Why does one wheel of the hoverboard spin and the other doesn't?

Usually the issue is in the motor-wheel itself, its wiring, or the control board channel that drives it. Sometimes the position sensor is to blame. Hoverboard repair in Astana starts with diagnostics to avoid replacing a working unit.

The hoverboard jerks and vibrates while riding—is it the gyroscope or the motor?

Shaking and jerking can come from both a misaligned gyroscope calibration and worn motor-wheel or bearing. They first try calibration, and if that doesn't help, they check the mechanics. What exactly to replace will be shown by disassembly; it depends on the model.

What are the dangers of continuing to ride a faulty hoverboard?

A broken hoverboard can suddenly cut out, tip over, or lose balance while riding, which is a fall risk. If it sparks, heats up, or smells burnt, it's best to stop using it immediately. It's safer to start hoverboard repair in Astana with diagnostics.

Repair guideArticleTECH SERVICE07

Gyroscooter repair in Astana by Tech Service with a technician visit

Kairat A., senior small appliance technician

Author: Kairat A.,Senior small appliance technician

Published
Updated

Tech Service repairs gyroscooters in Astana directly, without middlemen: our technician arrives at your home within 60 minutes anywhere in the city or accepts the device at the service center. Diagnostics are free, the technician gives you the price after diagnostics, and we provide a 1-year warranty on labor and parts. Our technicians have 4 to 20 years of experience.

Why your gyroscooter stopped working and what the error codes mean

A breakdown almost always shows up as a symptom — it won't turn on, it tilts, it hums, the indicators blink. We explain what's behind it and what our specialist checks.

Gyroscooter won't turn on — battery, power button, or control board

Most often the device won't turn on because of a discharged or worn-out battery, less often because of the power button or controller; our technician identifies the cause during free diagnostics. The battery powers the electronics and the hub motors, so when voltage drops under load, the device simply won't start. The power button loses contact over time from moisture and dust, and the control board goes into protection after a voltage spike during charging. The specialist checks the charge and internal resistance of the battery cells, tests the button circuit, and inspects the electronics for signs of overheating. If the indicator doesn't respond at all after a full charge, don't keep pressing the button — that can finish off the controller; it's better to show the device to a technician right away. The cost of gyroscooter repair depends on the fault: the technician gives you the price after free diagnostics.

Gyroscooter tilts and won't hold balance

Tilting to one side or forward is usually related to the gyroscope, tilt sensors, or out-of-sync hub motors, and we check these components first. The gyroscope is responsible for keeping balance: it reads the body position and sends a signal to the controller, which adjusts the speed of each wheel. When one sensor gives a false reading or a wheel lags in speed, the device pulls to one side even on flat pavement. Our technician connects diagnostic equipment, reads the sensor data and compares it with factory values, then checks calibration and motor synchronization. We also inspect the bearings and axle play — wear in this assembly can also throw off balance. Before the visit, try to remember if there was a fall or impact — that detail immediately narrows down the likely causes.

Table of symptoms and likely causes

SymptomLikely causeWhat the technician checks
Won't turn onBattery, power buttonBattery charge, button circuit
Tilts to one sideGyroscope, tilt sensorsCalibration, sensor readings
One wheel doesn't spinHub motor, wiringMotor winding, cables
Hums and vibratesBearings, wheelsPlay, bearing condition
Beeps and flashes redError code, boardCode decoding, controller
Sparks or smells burntWiring, control boardInsulation, signs of overheating

Battery and charging — the most common reason for a service call

The battery is a wear item that degrades faster than other parts of a gyroscooter. We explain why the device won't charge or drains quickly and how battery replacement works.

Why your gyroscooter won't charge

A hoverboard won't charge because of battery wear, a damaged charging port, or faulty wiring, and we check the entire charging circuit during free diagnostics. The indicator on the charger is on, but the device isn't charging — that means the problem is either in the battery itself or in the port contacts, oxidized after exposure to moisture and dust. The technician opens the case, tests the wiring, and measures the voltage on each cell, distinguishing a depleted cell from a broken wire. The control board is checked separately: if there's a short circuit in the charging circuit, it also blocks charging. Sometimes it's the opposite — the charger doesn't output the required voltage, and then the charger is to blame, not the device. If the device has been sitting discharged all winter, deep discharge of Li-ion cells is often irreversible — then only a battery replacement will help.

Fast discharge and capacity loss

If the hoverboard discharges in just a few minutes, the battery capacity is worn out, and we offer a replacement battery with a 1-year warranty on the new part. A lithium battery loses capacity with each cycle and from heat: in summer, the case heats up a lot in the sun, and the cells age faster than the manufacturer's stated lifespan. The second factor is storage with a full or zero charge: both extremes accelerate the chemical degradation. The third is riding over bumps with constant current surges, when the controller draws energy in peaks. The mileage per charge drops gradually, so it's easy to miss the moment for replacement — pay attention to how far you used to ride. If your usual route to the park is now too much, the battery is worn out and it's time to replace it.

How battery replacement works

  • Diagnostics: the technician checks the battery, port, and charging circuit, making sure the issue is with the battery and not the power supply.
  • Approval: the cost and replacement option are discussed with you before work begins — you decide without pressure or extra expenses.
  • Replacement: a new battery is installed, contacts and wire insulation are checked along the entire length to prevent voltage drops.
  • Testing: the device is tested under load — this shows stable operation and correct indicator readings on the display.
  • Warranty: the new part and labor are covered by a 1-year warranty, and the technician records the results of the load test.

Repair at home or at the service center — how we work

Some breakdowns can be fixed right at your home, while others require workshop conditions. We explain which issues can be solved on-site and which need a workshop, and how the home visit works.

What a technician can fix at home

At home, we fix most common breakdowns — from battery replacement to restoring wiring and the power button — and a specialist arrives within 60 minutes anywhere in the city. The on-site format covers cases when the hoverboard won't turn on due to a worn-out battery, doesn't respond to the power button, loses contact in the power circuit, or shows a sensor error. The technician brings tools and checks the device in its usual conditions — on a flat floor and with your outlet voltage, which is important for correctly assessing charging. Battery replacement, wiring soldering, and power button restoration make up the majority of on-site calls. This format is convenient because you don't have to disassemble and transport the device yourself: the specialist has everything needed for testing on hand.

When a workshop is needed

Complex cases — control board soldering, water damage recovery, motor-wheel replacement — we perform in the workshop, where there are conditions for precise work. The control board requires soldering small components under magnification, and after water exposure, complete drying and checking traces for corrosion are needed — this can't be done properly at home. Motor-wheel replacement is also a workshop procedure: it requires disassembling the unit, checking the winding, and balancing. If during a home visit the technician sees that the breakdown is more serious, they will honestly say so rather than rush a repair on-site. The 1-year warranty on labor and parts applies regardless of where the work was done. This approach saves your time: you don't pay for a visit that ends with a referral to the workshop.

How the home visit and diagnostics work

  • Request: you describe the symptom, a staff member clarifies the details and arrives within 60 minutes in the city.
  • Inspection: on site, the technician checks the components and identifies the likely cause of the breakdown.
  • Diagnostics: a free check shows which component has failed.
  • Approval: the staff member quotes the cost of labor and parts, and work begins after your consent.
  • Testing: after completion, the device is tested to make sure it works properly.

Repair cost and when repair is not worth it

The amount depends on the breakdown and parts, so the technician gives the exact figure after diagnostics. Let's break down what goes into hoverboard service, the price, and when investing in the device is no longer justified.

What makes up the repair cost

The cost of hoverboard service in Astana consists of the technician's labor and parts, and we give the exact amount after free diagnostics. During the check, we see which component has failed: the control board, motor wheel, battery, or power button. We disassemble the device, check each component, and show which part needs replacement and which can be restored. We agree on the final amount before work begins — you decide whether to proceed or not, and there will be no surprises at the end. We also take on unknown brands: the difficulty is not in the brand but in the availability of a specific component, and this is clear already during diagnostics. Our technicians have 4 to 20 years of experience, so rare models are not a problem for us.

When repair is not advisable

If the breakdown affects several expensive components at once — the control board, motor wheels, and battery — we will honestly say that restoration may not be worthwhile. In such a case, replacement is done in blocks, and the total scope of work approaches the overall lifespan of the device. During free diagnostics, the technician checks all three components and shows which part has already reached its limit and which can still serve. Sometimes it is wiser not to invest in old equipment, and we say so directly rather than pushing work. In our practice, it happens that a person comes with one symptom, but in fact half the body needs attention. An honest refusal here is part of the service, not a lost customer.

What affects the final amount

FactorHow it affects the amountComment
Type of breakdownSimple or complexDetermined during diagnostics
Number of componentsMore replacements — higher amountVisible after inspection
Repair or replacementReplacement is usually more expensiveThe technician will suggest an option
Access to the componentComplex disassembly adds laborDepends on the model

Warranty and why a direct contractor is more reliable than an aggregator

When someone unknown from a classifieds board fixes your device, there is no one to answer for the result. We explain what the warranty provides and why a direct contractor means responsibility.

What warranty applies to the repair

We provide a 1-year warranty on labor and parts, including replacement of the control board and battery. This period covers typical failures of hoverboard electronics — from battery cell degradation to controller failure after a failed firmware update. The warranty is issued for the specific component that was replaced or restored, not for the entire device: if a bearing in the motor wheel starts leaking after six months, that is a separate malfunction and separate work. The conditions fully apply to a replaced control board or a new battery. Let us clarify what the year covers: repeated failure of the same part, soldering defect, incorrect BMS operation after replacement. The warranty applies to both labor and the part — if something goes wrong, the same contractor will handle it, not a third party.

Why a direct contractor is responsible for the result

Tech Service is a direct service provider with its own technicians, not an aggregator or a middleman, so we are responsible for the result, not a third-party contractor. Our technician comes to your home or accepts the device at the service center, performs diagnostics, and is responsible for the quality of soldering, connector replacement, or battery repacking. With an aggregator, a platform stands between you and the technician, and when there's a dispute about quality, often no one is accountable — with a direct provider, responsibility is unified at every stage. This is also noticeable in warranty claims: the client returns to the same specialist who knows the history of the specific device, rather than opening a new order from scratch. In our practice, this is exactly how work is structured — from the first visit to the warranty case, one provider handles everything. We accept Kaspi QR, Kaspi Red, card, cash or transfer, but this does not affect the warranty terms: it is tied to the work and the part, not to the payment method.

Technician experience and free diagnostics

Our technicians have from 4 to 20 years of experience, and diagnostics before service is free, so you only pay for the agreed work. Our specialization is electric transport: hoverboards, segways, unicycles, electric bicycles, so the technician understands controllers, BMS boards, and hub motors, not just general electronics. The technician quotes the cost of work after free diagnostics, when the cause of the breakdown and the scope of intervention are clear. A technician visit within the city takes up to 60 minutes, and the same specialist who later handles the device under warranty comes. An experienced technician can often identify the likely component from the symptom right away — this saves time both during diagnostics and during the service itself, and also helps you understand in advance which part is under suspicion.

Difficult cases — water, falls, storage after winter

Water, impact, and long storage are the three scenarios after which a hoverboard most often stops working. We explain what can be done about this and when a technician is needed.

Hoverboard after water or rain

Water ingress most often damages the control board and wiring, and we restore such devices after checking for corrosion and short circuits. Moisture penetrates inside through body gaps and lingers at connectors, where it oxidizes contacts and gradually destroys board traces. During diagnostics, we open the body, inspect the cables, check the power circuit for short circuits, and test each connector — often a device that looks dry on the outside already has green corrosion on the contacts inside. If oxidation has affected only the connectors and traces, they are cleaned, tinned, and resoldered; with deep corrosion, when the metal layer is eaten down to the base, the board is replaced entirely. We also check the power button and sensors separately — they also suffer from moisture and give false signals. From our practice: the sooner the device is shown to a technician after the first signs of moisture, the higher the chance of avoiding board replacement — corrosion grows with every day of delay.

Consequences of a fall and impact

An impact usually damages the body, wiring, and component mounts, and we check the device for hidden damage, not just external. A crack in the platform or a torn cable causes malfunction even when only a scratch is visible outside. A separate risk area is the tilt sensors: from an impact they shift, and the device starts to tilt, jerk, or pull to the side while moving. Wheel bearings also suffer: after a hard landing, they develop play, and during movement — humming and vibration. During diagnostics, we check the platform geometry, wiring integrity, connector seating, and gyro sensor readings, then fix the consequences of the impact — from replacing mounts to calibrating components. A device that looks intact after such an impact may behave unstable due to a shifted sensor — that's why checking internal components is important, not judging by appearance.

Hoverboard won't charge after winter

Winter storage often leads to devices not charging due to deep battery discharge, and we check whether the battery can be restored or needs replacement. Li-ion cells lose voltage below the operating threshold after months of sitting discharged, and the controller simply won't start charging. Sometimes the charging port is to blame: oxidized contacts don't let current through even though the battery itself is fine, and sometimes it's the power adapter that no longer outputs the required voltage. We measure voltage on the cells, at the port output, and on the power adapter to pinpoint where the break is, and based on the results we choose restoration or replacement. To avoid this, devices in storage should be charged periodically — Li-ion doesn't like long periods of sitting discharged, and charging once every couple of months extends its service life.

Keeping hoverboards balanced and safe

A hoverboard fails in a few typical scenarios, and the device's behavior usually makes it clear which component to check first.

  • The symptom is a clue. How the hoverboard behaves gives a rough idea of which component is at fault, but the exact diagnosis is made by a technician.
  • The battery is a common cause. Won't turn on, drains quickly, or won't charge after winter — the battery is checked first.
  • The repair format depends on the breakdown. Typical faults are fixed on-site, complex ones — at the service center.
  • The cost becomes clear after diagnostics. The exact amount is quoted based on the free check, not in advance.
  • Warranty and a direct provider mean accountability. When one provider is responsible for the repair, dealing with the consequences is easier.

8brands

Which hoverboard brands we repair in Astana

List of brands with dedicated pages on the site. If your model isn't listed, ask the technician.

We also repairWe also repairTECH SERVICE08

Besides hoverboard repair, we fix other equipment in Astana

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE09

Worth reading before hoverboard repair in Astana

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp