Open until 19:00+7 (778) 021 11 78Call a technician
Tech Service technician next to a oven

Oven Repair in Astana

A technician arrives within 60 minutes anywhere in the city. Diagnostics are free.

  • 1-year warranty on labor and parts
  • Technicians with
  • 4 to 20 years of experience

Our own technicians4 to 20 years of experience

Beknur D.Yerkimbek S.Vladimir V.Ozat K.

Repair prices

  • Diagnostics0 ₸
  • Door seal replacementfrom3 000 ₸
  • Temperature sensor replacementfrom4 500 ₸
  • Heating element replacementfrom5 000 ₸
  • Mode switch replacementfrom5 000 ₸
All prices
ours5,06 127 reviews
order database
Common faultsCommon faultsTECH SERVICE02

Common oven faults in Astana

The symptoms people call about most often and the likely causes — from simplest to most complex.

PricesPricesTECH SERVICE03

How much oven repair costs in Astana

The table shows the "from" labor cost excluding parts and the timeframe; the technician will confirm the final amount with you before starting the repair.

Door seal replacementparts not included

1–2 hours

from3 000 ₸

Temperature sensor replacementparts not included

1–2 hours

from4 500 ₸

Heating element replacementparts not included

1–3 hours

from5 000 ₸

Mode switch replacementparts not included

1–2 hours

from5 000 ₸

Wiring repairparts not included

1–3 hours

from5 000 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after oven repair in Astana

Restarting and display flickering

1 visittime

from 7 500 ₸cost

Problem
The oven would turn on and then turn itself off in the middle of cooking, the display flickered and reset the time.
What we did
The technician removed the control module, replaced the bulging capacitors in the power circuit, checked the supply voltages, reinstalled the module, and tested operation in different modes.
Result
The oven operates without spontaneous shutdowns, the display does not flicker and does not reset the time. 1-year warranty on labor and parts.
I want the same
On a gray cloth on a white kitchen island lies a removed oven control module — a green circuit board in a black tray with relays and capacitors; a technician's hands in orange sleeves solder with a soldering iron at the edge of the board.BeforeAfter
01 / 04
All repairs
TECH SERVICE mobile technician with a tool case

How oven repair works at your home in Astana

Five steps from request to checking the work after repair.

  1. Requestsame day

    Leave a request, describe the symptom and your oven model.

  2. Technician visitwithin 60 minutes

    The technician brings tools and common parts for your model.

  3. Diagnosticsfree

    The technician asks about symptoms and records the inspection results for approval.

  4. Work approvalbefore disassembly

    If you decline the repair, the technician offers options and agrees on the timing of the work.

  5. Checkafter repair

    The owner accepts the work: watches a demonstration and asks the technician questions.

Leave a request

We reply during working hours

Book oven repair in Astana

A technician arrives within 60 minutes anywhere in the city. Describe the symptom and your oven model — the technician will come and identify the cause of the breakdown.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 021 11 78
Customer reviewsReviewsTECH SERVICE05

Reviews of oven repair in Astana

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Айжан Б.Order No. 2610-7479 · 2 October 2026

ours

Бұл жерге бірінші рет келдім. Түскі үзіліске қарамастан қабылдады. Бағасы мен сапасы сай.

Repair: oven repair in

Амир Р.Order No. TSA-81383 · 9 April 2026

ours

Алдымен интернеттен қарадым, кейін осында келдім. Барлығы ресми, чек берді. Бөлшекті екі күн күттім!!

Repair: oven repair in

Зоя М.Order No. AS-4124 · 11 February 2026

ours

Было важно успеть до конца недели, а то морозы обещали. Диагностика духовки — с неё и начал. Жалоба одна: не держит температуру. По факту меняли: тэн. Сравнивал — здесь дешевле. Привезли на такси, приняли без вопросов. Не разочаровался. Работает, как будто и не ломалось.

Repair: oven repair in

Айбек А.Order No. TSA-49239 · 12 November 2025

ours

Қыс қатты, техникасыз қиын, сондықтан тез жөндеу керек болды. Құрылғы ескі, бірақ жақсы қарайды екен. Ризамын, рахмет.

Repair: oven repair in

Валерия А.Order No. TSA-47143 · 4 June 2024

ours

Офис на Кабанбай батыра, технику туда и повёз. Нужен был ремонт духовки. Первое, что заметил: не закрывается. Выдали номер заказа и сказали, как отслеживать. Обошлось заменой: уплотнитель. Смета — 18 000, чек дали. Шум ушёл, роботает мягко

Repair: oven repair in

Римма Х.Order No. AS-7246 · 24 May 2023

ours

Хотел вызвать на дом, но в ЖК не пускают без пропуска. Жалоба одна: не греет. Дамир М провозился, но сделал. Третий месяц — никаких проблем.

Repair: oven repair in

Айжан Б.Order No. 2307-4703 · 4 May 2023

ours

Жұмыстан кейін баруға болатын жер іздедім. Күтуге уақытым аз еді, сол күні бітірді. Ақауын тез анықтады, қажетсіз нәрсе ұсынбады. Түскі үзіліске қарамастан қабылдады. Екі күнен кейін өзі қоңырау шалды. Келесіде де осында келемін.

Repair: oven repair in

Оксана Т.Order No. AS-5024 · 26 April 2023

ours

Раньше обращался в другой сервис, там очередь на две недели. Открыл — и сразу понял: не держит температуру. Третий месяц — никаких проблем

Repair: oven repair in

Акжол Э.Order No. TSA-77371 · 26 February 2023

ours

Телефонмен кеңестім, кейін апардым. Бөлшек қоймада бар екен, күтпедік. Жұмыс істеп тұр, шағым жоқ.

Repair: oven repair in

Лариса О.Order No. 23889 · 14 October 2022

ours

Знакомый мастер раньше здесь работал, дал номер. Вчера работало, сегодня уже не закрывается. Выдали номер заказа и сказали, как отслеживать. Цену держали до конца, молодцы. Тихо, ровно, без сюрпризов.

Repair: oven repair in

Our technicians in Astana

01 / 05
Beknur D., stove and oven repair technicianexperience11 years

Beknur D.

Stove and oven repair technician

Vladimir V., senior washing machine technicianexperience10 years

Vladimir V.

Senior washing machine technician

Ozat K., freezer repair technicianexperience11 years

Ozat K.

Freezer repair technician

Adilkhan N., washing machine installation technicianexperience16 years

Adilkhan N.

Washing machine installation technician

Questions and answersQuestionsTECH SERVICE06

Questions about oven repair in Astana

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Can a built-in oven be repaired at home in Astana?

Yes, the technician fixes most issues right in your kitchen without removing the cabinet. The oven only needs to be taken out if the problem is with the wiring behind the unit or the mounting, which is determined after diagnostics.

Why doesn't the oven heat up but the light and fan still work?

Most likely the heating element has burned out or a terminal connection has come loose, while the light and fan are still working. The technician will pinpoint the exact cause after free diagnostics; it depends on the model.

How can you tell if the oven's heating element has failed rather than the thermostat?

If there's no heat at all, or only the top or bottom heats, the heating element is usually the culprit. When the oven turns on but the temperature doesn't match the setting, the thermostat or sensor is suspected.

Why is it dangerous to keep using an oven that keeps tripping the breaker?

Repeated shutdowns point to faulty wiring, insulation breakdown, or a short circuit, which is a fire risk. Until the technician arrives, it's best not to turn the oven on and to cut power to it at the breaker panel.

Are gas ovens repaired at home in Astana?

Yes, we service gas ovens at home, but the technician will definitely check the gas control and the tightness of connections. Work on the gas part requires certification, so leave it to a specialist.

How can you tell a direct oven repair technician from an intermediary?

A direct contractor comes for diagnostics and repair themselves, and you can ask who exactly will do the work. An intermediary usually resells the request and doesn't take responsibility for the quality of the work.

Repair guideArticleTECH SERVICE07

Oven Repair in Astana by Tech Service Technicians

Beknur D., stove and oven repair technician

Author: Beknur D.,Stove and oven repair technician

Published
Updated

Tech Service repairs electric and gas ovens in Astana at your home with our own technicians. Diagnostics are free, a technician arrives within 60 minutes anywhere in the city, and we provide a 1-year warranty on labor and parts. The technician gives you the price after diagnostics, and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies.

Why the oven won't heat and other common symptoms

A symptom is not a diagnosis. You can't name a specific part from one sign, but you can narrow down the likely causes. Here are the most common complaints and what usually lies behind them.

Oven doesn't heat, but the light and fan work

If the light and fan work but there's no heat, the heating element is usually to blame — the top or bottom element, less often the thermostat or heating relay. The element is responsible for heating the cavity, and its coil is the first to burn out during voltage spikes and long operation at maximum. The convection fan keeps spinning — it's on a separate circuit and doesn't affect heating. The thermostat and temperature sensor fail less often: then heating turns on and off rather than disappearing completely. You can check the element visually — cracks, bulges, and breaks in the coil are visible without tools, but only a multimeter continuity test confirms the coil is intact, so we don't condemn a part by sight alone. In such cases, oven repair in Astana starts with checking the heating circuit, not with replacing parts at random.

Doesn't hold temperature and burns on top or bottom

Uneven heating and burning usually point to a faulty element in one of the zones, a thermostat that has drifted, or a clogged convection fan. The thermostat maintains the set temperature in the cavity, and when its readings diverge from actual, the appliance heats more or less than set. If the top bakes while the bottom stays raw, the circle narrows to the bottom heater and its circuit. A clogged convection fan wheel causes imbalance throughout the cavity — hot air doesn't distribute evenly. If only the bottom burns, check the bottom element and door seal first — heat loss through a loose seal causes more imbalance than it seems. On a visit, our technician first compares the temperature sensor readings with the actual heat in the cavity.

Trips the breaker, sparks, or smells like burning

If the oven trips the breaker in the panel, sparks, or smells like burning, the cause is sought in the wiring, an element with a short to the body, or the control module — and it's best not to turn the appliance on before a technician inspects it. A short to the body causes current leakage, which is what the panel's protection reacts to. The control module and relay short less often, but they are responsible for turning on the heat, so they are checked when the element is good. Tech Service checks the wiring and grounding when you complain that the breaker trips — without proper grounding, even a working appliance can give you a shock. Turning it back on "to test" after the breaker trips is the most common way to make wiring damage worse; it's safer to cut power to the line and wait for the technician.

Door, glass, and mechanical issues

A cracked glass, sagging hinges, and a worn seal are mechanical failures that are fixed by replacing the part, not by "tightening" it in place. Door hinges sag over time, and the door stops fitting snugly against the body — then heat escapes through the gap, and the seal around the perimeter wears out faster. The door glass is replaced as a whole because the heat-resistant panel is not glued or patched. Check the perimeter seal for tears and hardening: even a small gap throws off convection and makes neighboring zones heat more. Most mechanical issues are resolved on site without transporting the body. Using an oven with a cracked inner glass is dangerous: shards can fall out when heated, so it's best not to use the door until it's replaced.

Error codes and how diagnostics work

A signal on the display is a hint from the oven itself, not a verdict. Here's how to read typical codes and what happens during free diagnostics.

What error codes on the display mean

GroupWhat it indicatesComponent to check
Temperature sensoropen circuit or sensor failureelement and its circuit
Heatingheating element or heating relayheating element, relay, wiring
Module communicationcontrol modulecontacts and board
Convectionconvection fanfan motor

How free diagnostics works

Diagnostics are free with us: a technician comes over, inspects the oven, checks the components with instruments, and tells you the cause and the cost of work before starting. The on-site specialist reaches you anywhere in the city within 60 minutes — that's the standard time for all districts, including new residential areas and the right bank. First, they read the code on the display and compare it with the model, then test the heating element, temperature sensor, and relay, and inspect the control module contacts. Based on the inspection, you get an explanation: which component failed, why it happened, and which part needs replacing. The technician quotes the price after the check, not over the phone — so the amount reflects the actual breakdown, not an average for the model. You can pay via Kaspi QR, Kaspi Red, card, cash or bank transfer, and the warranty on labor and parts is 1 year. In my opinion, it's more honest to name the exact sum after inspection than to scare you with a preliminary range.

Why the same error comes back after repair

A repeat signal after work usually means the symptom was fixed, not the cause — for example, the sensor was replaced without checking the circuit or module. The control module sets the modes and display, so a fault in its contacts or board mimics a sensor failure: the new part works, but the code returns after a few power-ups. The second common reason is a part not matched to the model: temperature sensors and heating elements differ in resistance and mounting dimensions, and a universal analog gives the same error. The third is oxidized contacts in the heating circuit that weren't checked on the first visit. If the fault returns, it's important to show the technician the history: what signal appeared, what was replaced, and when — this narrows the search to a specific component. Note down the code and the date it appeared — such a note saves diagnostic time.

Repair at home or at the service center

Most oven breakdowns are fixed right in the kitchen, but there are cases when it's more convenient to bring the appliance to the service center. Let's look at how to choose the format for a specific fault and design.

When the oven is serviced at home

We fix most faults at home, including built-in ovens — the on-site specialist works right in the kitchen without removing the appliance from the cabinet if the design allows. Home oven repair is convenient because the technician arrives within 60 minutes anywhere in the city and brings tools for the specific component: heating elements, thermostat, sensor, wiring. Built-in units don't always need to be removed: some components are accessible after taking off the back panel or door, which saves time and effort. On-site diagnostics are free, so the format is confirmed after the inspection. In our experience, built-in models with side access to the body are disassembled on site faster than the cabinet's appearance suggests. If the panel comes off easily, home service covers even tasks that look like they require a workshop.

When it's better to bring it to the service center

SituationFormatWhy
Not heating, error, noiseat homecomponent accessible on site
Built-in with side accessat homewithout removing the cabinet
Door glass replacementat home or at the service centerdepends on the model
Complex body disassemblyat the service centerrequires workshop conditions

How long does home service take

A technician arrives within 60 minutes of your request anywhere in the city, and the repair time itself depends on the fault and whether the right part for your model is available. The exact time is given after diagnostics — it depends on which part is being replaced and whether it's in stock for your specific oven model. During the inspection, heating elements, the thermostat, temperature sensor, and wiring are checked so no component is replaced blindly. Diagnostics are free, so you know upfront what's being replaced and why. In our experience, replacing a sensor or heating element on-site is faster than replacing the door glass, which requires careful disassembly of the panel. If the part for your model isn't on hand, the technician will schedule a separate visit — the time is confirmed right after the inspection.

Safety When Your Oven Breaks Down

An oven is a high-current appliance, and if it's gas, it also involves an open flame. While the technician is on the way, it's important not to make the breakdown worse or create a risk for yourself and your home.

What to Do Before the Technician Arrives

  • Cut the power: switch off the breaker in the panel, not just the knob on the oven panel — this removes voltage from the entire line.
  • Don't turn it back on: every restart after the breaker trips puts extra load on the wiring and can damage it more than the appliance itself.
  • Ventilate the kitchen: if you smell burning, open a window, don't use the appliance, and keep flammable items away.
  • Don't take it apart yourself: the body may be live, and the gas part requires certification and a gas control check after any intervention.
  • Call a technician: describe the symptom over the phone — sparking, burning smell, or a tripped breaker — so the specialist brings the right parts and checks the wiring.

Gas Ovens and Gas Control Checks

We service gas ovens on-site, and for any work on the gas part, the technician checks the gas control — the system that cuts off the gas supply if the flame goes out. This is a key safety component: if it fails, gas keeps flowing into the chamber without burning. Gas control relies on a thermocouple — a sensor that heats up from the flame and keeps the valve open while the burner is lit. When the thermocouple gets dirty or fails, the oven goes out on its own, has a weak flame, or won't light at all — and the cause is usually the thermocouple, not the gas supply from the riser. Our technicians have 4 to 20 years of experience with this component, depending on their specialization. If a gas oven goes out on its own or has a weak flame, the cause is often the thermocouple, not the gas supply — but this should be checked by a technician, not by residents.

Electricals and Grounding

When a breaker keeps tripping, the technician checks not only the oven but also the power line and grounding — the cause may be in the wiring, not the appliance. First, the heating element and control module are tested: a breakdown in the heater's insulation causes current leakage to the body, and the protective breaker trips as expected. Then the line itself is checked — the condition of the outlet, the integrity of the ground wire, and the quality of connections in the panel. Our diagnostics are free, and a technician arrives anywhere in the city within 60 minutes to inspect the appliance on-site. Our experience shows that in about half of calls with a tripping breaker, the culprit is not the oven but worn wiring or a lack of proper grounding. If the breaker trips when other appliances on the same line are turned on, the problem is more likely in the electrical network, and replacing oven parts won't fix it.

Direct Contractor or Middleman

Search results for oven repair are full of aggregators and middlemen who pass your request along. Here's how a direct contractor is different and why it matters for an oven breakdown.

How a Direct Contractor Differs from an Aggregator

Tech Service is the direct provider: our own technician comes to you, not a contractor from an aggregator, so we stand behind the work and the warranty, not a third party. Our technicians have 4 to 20 years of experience, and every visit is covered by a 1-year warranty on labor and parts. A middleman works differently: a dispatcher sits between you and the technician, the request goes to a contractor, and responsibility gets blurred between two companies. When you go direct, the warranty and any claims go to one company — the one that sent the specialist. In our practice, this shows up in calls: people phone after using an aggregator and can't figure out who's responsible for a repeat breakdown. Before you book, ask who exactly will come and who the warranty is with — that way you won't be left alone with a broken oven.

How to choose an oven repair technician

  • Ask who will come: the company's own technician or a contractor from an aggregator — that determines who you file claims with.
  • Check the warranty: on labor and on parts separately, not just a vague "there's a warranty."
  • Ask about diagnostics: whether it's free or charged before any work starts.
  • Check experience: the range of years and work with your specific oven brand.
  • Ask about payment: which methods they accept so you're not hunting for an ATM after the visit.
  • Ask about cost: the technician gives it after a free diagnostic, not a random guess over the phone.

Brands and models we work with

We service ovens from various brands, including Bosch, Electrolux, Indesit, Ariston, and Beko, and we source parts for the specific model. Our technicians make house calls across the city — arrival within 60 minutes, free diagnostics, and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. From experience, the toughest cases are those where a part was already picked "by size" before we got there — a universal heating element may not match in power or mounting, and the unit fails again. Matching the part to the model, not "by size," is what ensures the unit fits without modifications and lasts its stated life. That's why when ordering a part we check the part number against the oven's data plate, not just against the appearance of the burned-out component.

Warranty, payment, and which ovens we take on

Final questions before you book — what about the warranty, how to pay, and whether we take your specific oven. Straight answers, no fine-print caveats.

What the 1-year warranty covers

We give a 1-year warranty on oven repairs — on labor and on parts, meaning we stand behind both the installation quality and the component itself. This covers the full scope of work our technician performed: replacing the heating element, thermostat, control module, fan motor, restoring the oven cavity wiring. If a part fails within a year due to our fault, it's replaced again without arguing over whose oversight it was. Technicians with 4 to 20 years of experience know which oven components fail again after improper installation, and they check adjacent elements during installation. A parts warranty separate from labor matters: if the part fails, you won't have to prove it wasn't the installation.

How the price is set and how to pay

The technician gives the price after a free diagnostic, once the cause and the needed part are known, and you can pay via Kaspi QR, Kaspi Red, card, cash or bank transfer. Diagnostics cost nothing: the technician comes, pinpoints the cause, shows you the faulty component, and only then quotes the amount. Payment is whatever's convenient for you — cash or card, whichever is easier. Quoting a price over the phone before inspection is just guessing: the same complaint "not heating" costs differently depending on whether it's the heating element or the control module. So we don't give a blind figure: it depends on the specific component and scope of work, not on the model overheard. First the technician determines what exactly failed, then matches it against the work list for your model — so the amount reflects the real scope, not an average city price list.

Which ovens we repair

  • Electric ovens: heating, thermostat, control module and cavity wiring, including checking the body grounding.
  • Gas ovens: gas control, thermocouple, ignition and connection tightness; we also check the draft separately.
  • Built-in ovens: on-site repair without removing kitchen cabinets or countertops, with protection for adjacent surfaces.
  • Ranges with ovens: combined faults in the cooktop and heating cavity, when one problem masks another.
  • Models with convection and grill: fan, grill heating element, even heating throughout the cavity and damper operation.

What every oven repair involves

A broken oven raises several questions for the owner at once: what exactly failed, can the appliance be fixed on site, and who should do the work. Below is a short summary to help you decide without unnecessary mistakes.

  • A symptom is not a diagnosis: "not heating" sounds the same whether the heating element, thermostat or relay has failed, so no part is condemned without testing with instruments.
  • An error code narrows the search: decoding depends on the brand, and the same code points to different components in different brands.
  • The format of work is chosen based on access to the component: most faults are fixed on site, including built-in units, while complex disassembly requires a service center.
  • Safety comes before speed: if there is sparking, a burning smell or a tripped circuit breaker, unplug the appliance and do not turn it on until inspected.
  • Warranty and a direct contractor are the main selection criteria: it matters who comes and who is responsible for the work and parts.

41brands

Which oven brands we repair in Astana

Each brand has its own design and parts. Choose a brand to go to its section.

We also repairWe also repairTECH SERVICE08

Besides oven repair, we fix other equipment in Astana

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE09

Worth reading before oven repair in Astana

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp