Original
Oven manufacturer's part
- Selection
- by part number or oven model
- Compatibility
- exact fit for the unit
- Delivery time
- depends on supplier availability
- Cost
- after diagnostics
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 11 78Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
We'll connect your oven to the power supply, fit it into the cabinet, and test it. A technician arrives within 60 minutes anywhere in the city.
Our own technicians4 to 20 years of experience




1 yearwarranty on labor and parts
60 minutestechnician arrival anywhere in the city
freediagnostics
The technician removes the old oven, prepares the niche with proper ventilation, connects the oven to the power supply, fits it into the cabinet if needed, and checks heating and door sealing. The cost of work is quoted after diagnostics.
01
Step 1quick
We cut the power, pull the oven out of the niche, disconnect the terminals, and remove the fasteners.
02
Step 2depends on the cabinet
We clean the niche, check ventilation gaps, and make sure the base is level for the oven.
03
Step 3standard
We connect the wires according to the model's diagram and check the terminals and grounding before turning it on.
04
Step 4as needed
We adjust the opening and mounts so the body sits level and the door opens freely.
05
Step 5a few minutes
We turn on the heating, check the fan, thermostat, and how tightly the door closes.
5
The service is ordered when buying a new oven, moving, or replacing old appliances, when the unit needs to be properly positioned and safely connected to utilities. The technician handles installation, built-in mounting in furniture, and connection to the electrical or gas supply.
Buying a new oven
The technician will unpack the appliance, check the contents, and install it in the prepared location.
Moving to a new place
The specialist will disconnect the appliance, transport it, and reconnect it at the new address.
Replacing old appliances
The technician will remove the old oven and carefully place the new one in its spot.
Built-in installation in furniture
The specialist adjusts the niche and secures the appliance in the kitchen cabinetry according to its dimensions.
Connecting to utilities
The technician connects the oven to the electrical or gas supply and checks that it works after installation.
If the symptom repeats after turning on, don't use the oven until a technician inspects it.
Describe the symptomsParts are selected by the number on the body or the oven model. Original and aftermarket parts differ in price and availability.
Original
or
Aftermarket
The table shows the cost of oven installation and repair: a starting labor price excluding parts and the time required; the technician confirms the final amount before any work begins.
We reply during working hours
When requesting oven installation, specify the oven model, connection type, niche size, and access to the outlet—this helps the technician prepare and quote the cost of work.

Warranty question? Call us
+7 (778) 021 11 786 127 reviews of repairs at TECH SERVICE in total
Амир Р.Order No. TSA-81383 · 9 April 2026
oursАлдымен интернеттен қарадым, кейін осында келдім. Барлығы ресми, чек берді. Бөлшекті екі күн күттім!!
Римма Х.Order No. AS-7246 · 24 May 2023
oursХотел вызвать на дом, но в ЖК не пускают без пропуска. Жалоба одна: не греет. Дамир М провозился, но сделал. Третий месяц — никаких проблем.
Оксана Т.Order No. AS-5024 · 26 April 2023
oursРаньше обращался в другой сервис, там очередь на две недели. Открыл — и сразу понял: не держит температуру. Третий месяц — никаких проблем
Григорий И.Order No. ZK-2021-506 · 22 November 2021
oursСосед по площадке хвалил, решил проверить. Утром столкнулся с этим: не держит температуру. Внутри оказалось: термостат. Ни копейки больше обещанного. Приехал без записи, но свободный мастер нашёлся. Ставлю пять. Стоит, работает, радует
Георгий З.Order No. 1807-4646 · 30 September 2018
oursПереезжали в новую квартиру, техника после перевозки захандрила. Приехал с дачи, а тут — не греет. Выдали номер заказа и сказали, как отслеживать. Замена: термостат. Цену держали до конца, молодцы. Обращусь ещё. Пользуюсь и вспоминаю добрым словом
Михаил У.Order No. AS-8530 · 30 April 2018
oursСмотрел, чтобы был свой склад запчастей, а не под заказ. Позвонил насчёт духовки. С этим и пришёл: не держит температуру. Радик Т посмотрел и честно сказал: менять не надо. На ресепшене оформили за пару минут, выдали квитанцию. Нужна была новая деталь: термостат. Сравнивал — здесь дешевле. Пользуюсь и вспоминаю добрым словом.
Галина Ф.Order No. AS-3681 · 30 April 2018
oursС чем обратился: не держит температуру. Дамир М посмотрел и честно сказал: менять не надо. Позвонил в Tech-service по номеру из 2ГИС. После ремонта — как новое
Альбина Ю.Order No. ZK-2016-442 · 30 August 2016
oursПозвонил в четыре места, тут ответили по-человечески. С чем обратился: не держит температуру. После ремонта — как новое.
Зоя М.Order No. 1603-7476 · 7 June 2016
oursДамир М — мастер от бога, если можно так сказать. Пришлось ставить: термостат. Тихо, ровно, без сюрпризов.
Оксана Т.Order No. 1612-1198 · 2 March 2016
oursСосед по площадке хвалил, решил проверить. Ни с того ни с сего — не держит температуру. Нагрев в норме, посторонних звуков нет.
experience11 yearsStove and oven repair technician
experience11 yearsDishwasher repair technician
experience10 yearsSenior washing machine technician
experience11 yearsFreezer repair technician
experience16 yearsWashing machine installation technician
Didn’t find the answer? Message us on WhatsApp.
Ask a questionYou need a working grounded outlet and a wire rated for the model's power, plus a level niche with ventilation gaps. Exact parameters depend on the model — the technician checks them before installation.
The technician checks the niche, levels the oven, secures it in the cabinet, and tests heating and modes. If needed, they adjust the fit so the door closes evenly.
You can place the oven in the niche yourself, but connecting to power requires skills and checking the wiring. A connection mistake can cause overload and damage the electronics, so it's better to leave it to a technician.
The technician checks the wiring and outlet, replaces the terminal block if needed, and connects the oven according to the model's diagram. Work is done safely to avoid overload.
Yes, there is a 1-year warranty on labor and parts. It covers the correct connection and installation performed by the technician.
Yes, the technician can trim shelves or niche walls so the oven fits evenly without gaps. Whether modification is possible depends on the cabinet material and the oven model.

Author: Beknur D.,Stove and oven repair technician
Published
Updated
Tech Service installs ovens at your home in Astana: our technician arrives within 60 minutes anywhere in the city, performs free diagnostics, and connects the appliance to the power grid. 1-year warranty on labor and parts, Kaspi QR, Kaspi Red, card, cash or bank transfer accepted. The technician provides the price after free diagnostics.
Buyers often confuse three different things: placing the oven in a niche, connecting it to the power grid, and repairing a broken appliance. Let's clarify when installation is required and when it's something else.
Installation means mounting and connecting a working oven, while repair means fixing an appliance that has already broken down. Oven installation includes securing the body in the niche, connecting to the power grid, and checking operation. Oven repair begins when the unit is faulty: it doesn't heat, doesn't hold temperature, or shows an error code. During installation, the technician doesn't disassemble the electronics—they check the fit, terminals, and heating. If the oven doesn't heat or shows an error right after installation, the cause is usually the connection, not a breakdown—so checking after installation is essential. Our technician doesn't replace the heating element or control board: that's a different type of work and is priced separately. The distinction is simple: as long as the appliance is working, it's about installation, not repair.
We recommend calling a technician if the oven needs to be built into a niche, connected to the power grid, or checked after installation. A built-in oven is installed in a furniture niche with precise width and depth tolerances, and an electric oven requires a dedicated wiring line for the load. Our technician arrives anywhere in the city within 60 minutes, diagnostics are free, and there's a 1-year warranty on labor and parts. DIY installation saves time, but when building into furniture, a mistake in niche dimensions or terminal connections leads to re-disassembly. In my opinion, calling a specialist is justified as soon as the body doesn't fit into the opening without trimming the countertop—fixing it yourself costs more.
We break down what the customer pays for—from inspecting the installation site to checking heating after mounting—and show in a table how the work differs by body placement type.
Oven installation includes checking the installation site, securing the body, connecting to the power grid, and testing after the work. Our technicians with 4 to 20 years of experience start by measuring the opening, inspecting fasteners, and checking the cable in the power area. Then the appliance is leveled and secured so it doesn't shift when the door is opened. The electrical part is done with checking the terminal block and grounding. After installation, the technician starts the heating and checks the control panel, fan, and all modes. Diagnostics are free, and a specialist's visit anywhere in the city takes 60 minutes. A separate step is checking ventilation: without a gap for heat dissipation, the body overheats, and the electronics fail faster. Oven installation in Astana follows the same procedure—from measurements to heating check.
| Installation type | What we check | What we do |
|---|---|---|
| Built-in into a ready niche | dimensions, ventilation gap | secure the body, connect |
| Built-in with furniture modification | fit, fastening | adjust the opening, install |
| Freestanding | location, access to power | connect, level |
| Oven from another store | completeness, cable | install, check heating |
Electrical work is the owner's main concern before installation: will the outlet handle the load, will the wiring melt. We explain what the technician checks before connecting and how to make sure the appliance works properly.
We check whether the existing outlet and wiring can handle the oven's load and let you know if a dedicated line is needed. We inspect the electrical cable and terminals on site: wire cross-section, insulation condition, breaker type in the panel, and grounding. An electric oven connects to the mains via a cable and terminal block, and the quality of this connection determines whether the protection will trip under peak load. A powerful appliance on a shared line with other devices is a common reason for the breaker to trip; this is identified during free diagnostics before installation, not after. Before buying a new model, compare its power rating with your line's parameters — this way you'll avoid redoing the wiring after delivery. The oven installation price depends on whether a dedicated wiring line is needed, and the technician quotes it after free diagnostics. In my opinion, it's better to spend ten minutes checking the nameplate data than to open up a wall for a new cable.
After installation, we check heating, control panel operation, and that there are no errors on the display. A Tech Service technician runs several modes, monitors how the appliance reaches the set temperature, and compares the readings with the nameplate data. The post-installation check also includes terminal connections: they are tightened to prevent looseness and overheating. If the appliance heats unevenly, the cause may be incorrect terminal connection rather than the appliance itself — such a check is done by a specialist, not a salesperson. The technician quotes the cost of work after free diagnostics, when it's clear whether a dedicated line is needed. The warranty on labor and parts is 1 year, so if any error appears on the display, call us instead of taking the appliance apart yourself.
We show the path from request to check: how we arrange the visit, what happens on site, and when you learn about the upcoming steps.
A specialist arrives within 60 minutes anywhere in the city, and before the visit you just need to clear access to the niche and outlet. We take requests by phone or messenger: we clarify the oven model, the dimensions of the installation space, and the connection type — dedicated line or existing outlet. From this information, we know in advance which tools to bring and how long the installation will take. We cover the whole city, including new residential complexes on the left bank and older buildings with narrow kitchens. It's also best to clear dishes and baking trays from the appliance and fragile items from adjacent cabinets — this way no time is wasted on moving things. The sooner you provide the model and niche dimensions, the more accurately we can estimate the scope before the visit.
Two factors distinguish direct service from an aggregator and a private technician — the warranty period for installation and the status of the person who comes to your home. We explain what really stands behind a year of obligations and why it matters to know the contractor.
We provide a 12-month warranty on both installation and parts, so if something goes wrong, the customer returns to the same technician instead of looking for someone new. The warranty covers both the installation itself and the components we use: seals, fasteners, terminals, connection parts. For the owner, this means that a faulty connection or a failed part is fixed within a single visit — with no extra labor charges. Our experience shows that disputes usually arise from consumables and connection points, not from the oven housing. A one-year warranty is especially important for installation: if a wiring defect comes to light, it is fixed free of charge rather than paid for again. Ask the technician exactly what the warranty covers — a vague “everything is under control” without a term or a list of what’s included doesn’t mean much.
Tech Service is a direct service provider with its own technicians, not an aggregator or an intermediary, so the service itself is responsible for the installation. Our specialist with 4 to 20 years of experience comes to your home — not a third-party contractor you see for the first time and will never meet again. An aggregator simply passes the request to an available technician: it doesn’t control the quality of the installation, and there’s effectively no one to file a complaint with. With us, diagnostics are free, a technician arrives within 60 minutes anywhere in the city, there’s a one-year warranty, and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies — the terms are the same for every request. We also install ovens bought from other stores — there’s no tie to where the appliance was purchased. In my view, the main sign of a direct service is that the specialist quotes the price after a free on-site diagnosis, rather than fixing a sum blindly over the phone.
Below is a short summary of oven installation: it helps you understand the scope of work in advance and check the result after the technician’s home visit.

If your oven isn't working, first check the outlet, the circuit breaker in the panel, and the selected mode, then assess the symptom: not heating…
3 October 2025 · 12 minutes read
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read