Геннадий Ж.Order No. 2601-4185 · 28 October 2026
oursПозвонил в четыре места, тут ответили по-человечески. Открыл — и сразу понял: не морозит. Замена: компрессор. Сравнивал — здесь дешевле. Ни шума, ни запаха, всё штатно.
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 746 00 26Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Diagnostics are free, and the technician gives you the cause and the price on site.
Our own technicians4 to 20 years of experience




Repair prices
The symptom points to a component, but the technician confirms the exact cause on site. Below are typical combinations.
refrigerant leak, compressor, thermostat
from5 000 ₸
clogged capillary tube, refrigerant leak
from5 000 ₸
clogged drain, door seal, hoses
from4 500 ₸
defrost sensor, timer, defrost heater
from5 500 ₸
the code points to a specific component
from10 500 ₸
compressor, fan, mounting
from6 500 ₸
thermostat, sensor, door seal
from5 500 ₸
start relay, compressor, wiring
from5 500 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1 visittime
from 4 500 ₸cost

BeforeAfter5 steps

Five steps from request to checking the appliance after repair.
The technician checks the components and gives you the cause before any work starts.
The technician agrees on a convenient time slot and reminds you to clear access to the refrigerator.
The technician lists which components are checked and what the repair includes, with no unnecessary promises.
The technician gives you the list of work and the final price; you confirm the scope and payment.
The technician starts the refrigerator, measures the temperature in the compartments, and explains what to expect in the first hours.
We reply during working hours
Leave a request and a technician will arrive within 60 minutes. Diagnostics are free, and you get the cause and the price on site. 1-year warranty on labor and parts.

Warranty question? Call us
+7 (778) 746 00 266 127 reviews of repairs at TECH SERVICE in total
Геннадий Ж.Order No. 2601-4185 · 28 October 2026
oursПозвонил в четыре места, тут ответили по-человечески. Открыл — и сразу понял: не морозит. Замена: компрессор. Сравнивал — здесь дешевле. Ни шума, ни запаха, всё штатно.
Константин О.Order No. AS-4180 · 4 October 2025
oursПервое, что заметил: намерзает лёд. Вернули — проверил, всё ок). Работает, как будто и не ломалось.
Лариса О.Order No. AST-2503-174 · 5 February 2025
oursИскал, кто работает в субботу, у нас с женой график сложный. С этим и пришёл: намерзает лёд. Вернули — проверил, всё ок!!
Екатерина К.Order No. TSA-51912 · 4 November 2023
oursПроблема ровно одна: шумит. Дильмурат С отсоветовал дорогой ремонт, предложил простой. Проверил на всех режимах — держит)
Людмила Щ.Order No. 96289 · 14 July 2022
oursПричина обращения — не морозит. Никита М пообещал и сделал, без напоминаний. Сейчас пашет без нареканий
Лаура О.Order No. AST-2107-903 · 27 December 2021
oursТелефонмен кеңестім, кейін апардым. Мастер бәрін түсіндірді. Түскі үзіліске қарамастан қабылдады. Барлығы ресми, чек берді. Диагностика тегін болды. Бөлшек қоймада бар екен, күтпедік. Жұмысты сол күні аяқтады. Кепілдік берді, бұл маңызды. Келесіде де осында келемін.
Альбина Ю.Order No. AST-2001-960 · 27 April 2020
oursЗаявку оставил через сайт вечером, утром перезвонили. Думал, попал на дорогой ремонт. Симптом как на ладони: шумит. В другом месте просили на треть больше. Полёт нормальный.
Юрий М.Order No. AS-9458 · 7 May 2018
oursИскал, кто работает в субботу, у нас с женой график сложный. Заявку оставил на всякий случай, а зря время тянул. Первое, что заметил: шумит. Никита М сам позванил и сказал, что готово. Созвонились, уточнили модель, срозу сказали по запчасти. По факту меняли: модуль. Tech-service посоветовали в домовом чате. Пользуюсь и вспоминаю добрым словом.
Валентина Р.Order No. TSA-79156 · 30 January 2017
oursЗаявку оставил через сайт вечером, утром перезвонили. Не хотел везти, думал, проще новое взять. С чем обратился: не морозит. Никита М — мастер от бога, если можно так сказать. В 26 000 уложился, как и обещали. Приняли вечером, хотя до закрытия оставалось минут десять. Пришлось ставить: модуль. Пять баллов. Тихо, ровно, без сюрпризов.
Инна Н.Order No. AS-5681 · 20 August 2016
oursБольше всего мешало: намерзает лёд. Дильмурат С объяснял без умных слов, за это спасибо. Выбрал techservice, потому что близко к работе. Сейчас пашет без нареканий.
experience11 yearsDishwasher repair technician
experience10 yearsSenior washing machine technician
experience11 yearsStove and oven repair technician
experience11 yearsFreezer repair technician
experience16 yearsWashing machine installation technician
experience8 yearsDishwasher technician
experience12 yearsWashing machine repair technician
experience10 yearsWashing machine board repair technician
Didn’t find the answer? Message us on WhatsApp.
Ask a questionMost often this is the start relay: it clicks as it tries to start the compressor, but the compressor won't kick in. Less often the issue is the compressor itself or the control board. A technician will give you a precise answer after free diagnostics.
A flashing light usually signals a fault: it could be a sensor error, a defrost failure, or a fan problem. The meaning depends on the model, so it's best to show the flashing code to a technician during diagnostics.
Error codes vary by Candy model, and you can't decode them without the manual. This symptom often points to a faulty sensor or a clogged capillary, but a technician will determine the exact cause during an inspection.
It depends on the model and the type of failure: sometimes a Candy module can be restored by soldering and replacing individual components, while in other cases a new unit is needed. The technician decides after free diagnostics at your home.
You can submit a request on the website, and a technician will arrive at a time that works for you. Diagnostics are free. Before the technician arrives, unplug the fridge and move your food to a cold place so it doesn't spoil.
Yes, a Tech Service technician comes to your home in Astana within 60 minutes and performs free diagnostics on site. Based on the results, they explain the cause and the cost of work, and the warranty on Candy repairs is 1 year.
Tech Service repairs Candy refrigerators in Astana: our technician comes to your home or takes the appliance to our service center. Diagnostics are free, we arrive within 60 minutes anywhere in the city, and you get a 1-year warranty on labor and parts. The technician gives you the price after diagnostics, and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies.
Most often, Candy owners call us about a warm compartment, frost on the back wall, or a blinking indicator. A single symptom can already narrow the causes down to two or three components—and give you an idea of what to expect from diagnostics.
If the light is on but there's no cold, the unit is getting power, and the cause is more likely in the cooling circuit or the compressor start components rather than the wiring. The motor-compressor may hum and fail to start: the start relay clicks, tries to spin up the rotor, and cuts out, while the compartments stay warm. Another scenario is the compressor running continuously, but refrigerant has leaked through a microcrack in the circuit or a seal, leaving the evaporator dry while the motor hums. On No Frost models, a clogged defrost channel can also be the culprit, preventing air from reaching the compartment. Check whether you can hear the motor humming and the relay clicking: this helps the technician distinguish a compressor failure from a refrigerant leak before the visit and bring the right tools.
On electronically controlled Candy models, a blinking indicator or a code on the panel points to a specific component—most often the defrost sensor, the heating element, or the control board. The control board polls the compartment and evaporator sensors, the defrost heater, and the compressor relay: when a parameter goes out of range, it displays a code or a series of flashes instead of the temperature. The number of flashes and the pauses between them help identify an open defrost sensor, a shorted heating element, or a communication failure with the module. On some models, the same code is accompanied by a sound signal, and the indicator keeps blinking until reset. Write down the code and the flash sequence before the technician arrives: decoding the panel narrows down diagnostics and saves time on site.
If your Candy hums without pausing, the thermostat or sensor is often to blame, and if cooling is lost after defrosting, it's usually a compressor start failure or a clog in the capillary tube. The thermostat and temperature regulator open the circuit when the set temperature is reached: if the contacts stick, the motor-compressor doesn't get the signal to rest and runs nonstop, and the evaporator gradually frosts up. After defrosting, the picture is different: moisture and meltwater get into the capillary, the passage narrows, pressure at the compressor outlet rises, and the unit either won't start or shuts off on protection. Don't defrost again or turn the regulator at random: with the motor running nonstop, this accelerates compressor wear and can finish off the valve.
We break down the components that fail most often on Candy and show the technician's logic: which part is replaced separately, which is restored, and which requires a workshop.
Clicks without starting on a Candy usually mean a worn start relay: it doesn't hold the contact, and the motor-compressor won't start. The part sits in the start circuit next to the compressor, and when the contacts burn out, you hear a characteristic click after which the unit goes silent. On electronically controlled models, the same symptom can be caused by a start circuit failure on the board, so we check both elements in turn and see which one is losing contact. A working compressor may be fully functional, and there's no reason to replace it. The start relay is replaced separately from the motor, so during diagnostics we check it first to avoid touching a working component. In our experience, this approach saves both time and the equipment's lifespan.
| Candy component | Failure sign | What the technician does | Where the repair is done |
|---|---|---|---|
| Motor-compressor | won't start, no cooling | checks startup, replaces if it fails | service center |
| Control board | flashing, error code | repairs or replaces the board | service center |
| No Frost system | ice buildup, defrost failure | checks the heating element, timer, sensor | at home or at the service center |
| Refrigerant circuit | warm compartment, leak | finds the leak, refills with refrigerant | service center |
Candy has a compact layout of components and electronic controls on many models, so diagnostics start with the panel codes rather than a mechanical check. The Italian brand made both a retro line with simple mechanics and modern models with an inverter compressor — their parts sets are different. Because of the tight fit, the board and the start element sit close to the circuit, and the technician removes the panel carefully so as not to touch the tubes. Candy refrigerator repair in Astana is done with the specific series in mind: the part and board are matched to the model, not to the brand as a whole. In my view, sticking to the series saves time — Candy has fewer universal solutions than brands with a single platform.
We walk through the request flow: how the specialist arrives, what is decided on site, when the appliance is taken to the workshop, and how the result is checked after the work.
We take the request and send our specialist across the city within 60 minutes to inspect the Candy refrigerator on site. We log the request based on what you tell us: the model, the symptom, what the panel shows. The specialist comes to your home, not to a drop-off point — the appliance stays with you until he says it needs the workshop. This approach saves time: you don't have to haul the unit across town just to hear a preliminary verdict. On the visit, he checks the power, thermostats, and sensors, listens to the compressor, and looks at the errors on the display. Before the visit, describe the symptom and the code on the panel: our technician brings parts for your model, not a universal kit, so some jobs are finished on the first visit. Candy refrigerator repair in Astana at home follows the same route: request, visit, on-site inspection.
Diagnostics are free with us, and based on the results the specialist decides whether to fix the Candy at home or take it to the service center. Relays, hinges, the seal, and some No Frost work are done on site — the jobs that don't require opening the circuit. The compressor, refrigerant replacement, and tube brazing are done in the workshop: it has the conditions for vacuuming and refilling. The technician explains why he chose this or that option and shows the component that's causing the appliance not to cool. If a part needs to be ordered, he gives the timeframe and confirms it before starting work. In our practice, the decision "at home or at the service center" is made during diagnostics, not over the phone — you can't guess the component from a symptom description, and a wrong choice of repair location means a repeat visit.
We finish the service by checking the compressor startup and cooling buildup to make sure the Candy has reached its operating mode. The specialist measures the temperature in the compartments, listens to the motor-compressor, checks the on/off cycle, and sees if any error remains on the panel. The appliance is left switched on during the check — that way you can see whether it cools steadily. He shows how the unit behaves after service and explains what to watch in the first few days so you notice a repeat failure in time: the temperature in the compartments, the compressor operation, the behavior of the indicators. There is a 1-year warranty on labor and parts, so the check result is recorded before the technician leaves, and you get a clear reference point for the first days of use.
After the repair, the Candy refrigerator owner gets a warranty and a clear payment process. Below we explain exactly what we commit to and when the technician gives you the price.
We provide a 1-year warranty on labor and parts for Candy refrigerator repairs. The coverage applies to any component the technician replaced or repaired: compressor, thermostat, start relay, No Frost system sensors, control module. The term is the same for both part replacement and repair — we don't have a separate shorter period for electrical or mechanical parts. For the owner, this means that if the same issue comes back, you don't have to figure out who is responsible for the component: the part and the installation are covered by one warranty. The part we install and its installation come as a single package — so if it fails, there's no dispute between the part supplier and the service. In our experience, this single coverage saves time: you don't have to prove that the cause of the failure is the part itself and not its installation. The technician who comes back handles it as the same warranty case and doesn't open a new request.
The technician gives you the price after free diagnostics, once the cause of the Candy breakdown is clear. Before that, he doesn't mention any amounts — first he checks the component, finds the fault, and only then calculates the scope. The agreement happens before work starts: you decide whether to repair or replace the component, knowing exactly what work and parts are included in the estimate. The total is made up of labor and parts — the technician goes through each item rather than giving one number without explanation. You can pay via Kaspi QR, Kaspi Red, card, cash or bank transfer, and you choose the one that's convenient for you. Diagnostics remain free whether you agree to the work or not. In my view, this approach removes the owner's main fear — that the price will be named after disassembly, when it's awkward to refuse. Agreeing before work starts and payment via Kaspi QR, Kaspi Red, card, cash, or bank transfer let you calmly weigh the scope and make a decision without pressure.
Replacing the appliance isn't discussed instead of repair, but after it — if the breakdown affects several components at once. Here are the situations where a Candy owner is better off investing in a new unit.
Repair stops making sense if the motor-compressor fails along with the refrigerant circuit, or if the body and seal are so worn that cold doesn't hold. The motor-compressor circulates refrigerant through the circuit, and replacing it together with restoring airtightness is no longer one operation but two connected components. Add a corroded evaporator and a seal that doesn't fit along the entire door, and cold escapes through the gaps even after recharging. In that situation, the work turns into a chain: you replace one thing, and a month later another shows up. The decision is based on the combination of signs — the age of the appliance, the number of components to replace, and the condition of the compartments — not on a single breakdown. If the compartments are already frozen through and the door sags on its hinges, a new unit will cost less than a series of visits. Each owner sets their own threshold for what's worth it, but three or more components to replace is already a reason to consider replacement.
During free diagnostics, we honestly tell you when repairing a Candy is justified and when the cost of components is comparable to replacing the appliance. Tech Service diagnostics identify the cause by symptom and error code: the technician checks the motor-compressor under load, inspects the refrigerant circuit for leaks, assesses how tightly the door fits, and checks the condition of the evaporator. A single relay click or a blinking indicator isn't a verdict yet — similar symptoms point to different components, and the scope of work varies greatly. The technician assesses not only the breakdown but also the remaining life of the compressor and the condition of the circuit, so the decision doesn't have to be revised a month later. Based on the inspection, you get a report listing the components to replace — it makes it easier to weigh what's more cost-effective for you. A technician visit within the city takes up to 60 minutes, so the inspection doesn't stretch out for a week.
Here are the key things a Candy refrigerator owner should keep in mind before calling a technician and during the conversation: what affects diagnostic accuracy and how to choose between repair and replacement.
90brands
We work with every brand sold in Kazakhstan — from Samsung, LG and Atlant to Biryusa, Indesit, Stinol and rare imported makes. Can’t find yours in the list? Call anyway — a technician will come and take a look.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
If your refrigerator isn't cooling but the light is on, the cause is usually one of the components in the cooling circuit: the compressor, thermostat…
10 December 2025 · 13 minutes read
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read












