experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 13 16Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Diagnostics are free.
Our own technicians4 to 20 years of experience




Repair prices
Common causes of Polaris steam generator breakdowns and the approximate repair work for each.
scale on the heating element
from4 500 ₸
worn seals or a crack in the tank
from5 000 ₸
heating element burned out
from6 000 ₸
insulation breakdown in the heating element
from2 500 ₸
scale in the tank or worn pump
from4 500 ₸
scale cartridge is clogged
from4 500 ₸
control board malfunction
from8 000 ₸
broken steam control valve
from5 000 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1–2 hourstime
from 6,000 ₸cost

BeforeAfter5 steps

Five steps from request to checking the unit after repair.
You describe the fault, the technician clarifies the details and arranges a visit.
The technician comes anywhere in the city to inspect the Polaris steam generator on site.
The technician asks about the model and symptoms to prepare the right tools and parts.
The client receives warranty documents for labor and parts, as well as the replaced part.
The technician explains how to use the unit after repair and what to check for care.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
The unit is faulty — leave a request. 1-year warranty on labor and parts. You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies.

Warranty question? Call us
+7 (778) 021 13 167 898 reviews of repairs at TECH SERVICE in total
Аяна Е.Order No. ZK-2026/953 · 22 August 2026
oursОбращался в сервис по совету знакомых. На звонок ответили не с первого раза. Приняли быстро, объяснили, что и как будет. Работу сделали в тот же день. Сделали ровно то, о чём договаривались. Не пожалел ни разу.
Ильяс Н.Order No. 724874 · 16 August 2023
oursНужен был ремант, искал вариант поближе. Было важно, чтобы сделали до выходных — гости, то-сё. Дамир М не стал навязывать дорогую запчасть, поставил нормальную. По срокам не подвели. Достойно.
Аида Т.Order No. 40786 · 27 December 2021
oursПришёл по записи, всё прошло спокойно. Искал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Отдельно скажу про мастера: Дамир М — спокойный, без лишней суеты. Проверили при мне, показали результат. Работает даже тише, чем до поломки
Аружан К.Order No. 274537 · 18 October 2021
oursПервый раз сюда, до этого чинился в другом месте. Позвонил в techservice по объявлению, всё совпало. Всё объяснили простыми словами. Приняли быстро, объяснили, что и как будет. Цена не изменилась ни на тенге. В общем, доволен.
Ксения И.Order No. TS-2112-480 · 30 July 2021
oursВыбирал между несколькими сервисами, остановился на этом. Для Алматы — достойный вариант)
Гульнара Б.Order No. TS-6054 · 29 March 2021
oursВыбирал между несколькими сервисами, остановился на этом. Техника на гарантии уже не была, так что выбор был свободный. Цену сказали сразу, без «ну потом посмотрим». Дали гарантию и рекомендации на будущее. Всё объяснили простыми словами. Цена не изменилась ни на тенге. Мастер посмотрел, назвал причину, всё разложил по полочкам. Сделали ровно то, о чём договаривались. Для Алматы — достойный вариант.
Марина В.Order No. 514682 · 17 September 2017
oursВыбирал между несколькими сервисами, остановился на этом. Хотел сначала вызвать мастера на дом, потом передумал. Дмитрий Радионов помог выбрать, без навязывания. Цену сказали сразу, без «ну потом посмотрим». Перезвонили, когда можно было забирать. Не пришлось ничего доказывать и просить. Работали аккуратно, ничего не поцарапали. Сказать, что доволен — ничего не сказать.
Камила А.Order No. ZK-2961 · 1 November 2016
oursПозвонил, когда техника встала окончательно. На звонок ответили не с первого раза. Работу сделали в тот же день. Приняли технику, выдали квитанцию. Могу рекомендовать.
Даулет С.Order No. ZK-2016/948 · 8 October 2016
oursПришёл по записи, всё прошло спокойно. Хотел сначала вызвать мастера на дом, потом передумал. Цена не изменилась ни на тенге. Достойно
Гульмира С.Order No. 969245 · 22 June 2016
oursДолго откладывал, но пришлось обратится. Tech-service посоветовали в чате дома, спосибо им.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionOn Polaris units, the heating element usually suffers from scale buildup, along with the steam valve and seals. Less often, the thermostat, pump, or level sensor fails. A technician will determine exactly what happened to your appliance during free diagnostics.
Most often this happens when the valve is clogged or there's heavy scale on the heater; sometimes an overfilled tank is to blame. It depends on the model. Cleaning the components usually restores normal steam output.
A crack in a Polaris tank can't be reliably sealed with sealant: under pressure and heat, the leak will come back. Usually the tank is replaced with a new one, and the technician will tell you whether such a repair makes sense for your model.
A sharp burning or plastic smell indicates overheating wiring or melted parts, and you shouldn't use the appliance anymore. Unplug it and call a technician: they'll find the source and tell you whether the component can be repaired or needs replacement.
Increased humming on Polaris units is most often caused by the pump, valve, or scale deposits inside the steam path. It depends on the model and the nature of the noise. The exact cause will be revealed by disassembly and component checks during diagnostics.
Light maintenance according to the manufacturer's instructions is fine, but you shouldn't disassemble the appliance or remove the heater yourself: it's easy to damage the seals and electronics. A technician will remove heavy scale during repair with a warranty on the work.
Tech Service repairs Polaris steam generators in Almaty as a direct provider: our technician comes to your home within 60 minutes or repairs it at the service center. Diagnostics are free, there is a 1-year warranty on labor and parts, and technicians have 4 to 20 years of experience. The technician provides the cost after diagnostics.
A Polaris steam generator is built around a boiler, heating element, and steam supply valve. Most service calls come down to a few recurring symptoms, each pointing to a specific component—from scale buildup to the control board.
Most often, steam disappears due to scale on the heating element and a clogged solenoid valve, while water instead of steam indicates boiler overheating that can't evaporate moisture fast enough. Almaty's hard water speeds this up: salts deposit on the heater and in the steam line, the valve opening narrows, and steam comes in bursts. After cooling and restarting, steam appears for a couple of minutes and then disappears again—this is almost certainly scale, not electronics. Flushing the boiler solves this faster than replacing parts, and it's worth starting at the first signs rather than waiting for a complete failure. If self-flushing doesn't help, a technician repairs Polaris steam generators in Almaty after free diagnostics. Scale on the heating element also hinders heat transfer: the salt layer slows heating, and the unit takes longer to reach operating mode.
If the unit hums but doesn't heat, the heating element or thermostat is at fault, while a complete lack of power-on is more often related to the control board or power supply. The thermostat cuts off heating when the set temperature is reached, and when it sticks, the boiler either fails to reach mode or goes into protection. Humming with a cold boiler means the pump is running dry: no water is coming in, but the pump keeps running and wears out faster. The control board in these models combines power, sensors, and heating relay, so it's checked after confirming the heater and thermostat are working—this way diagnostics don't turn into replacing everything. Don't delay inspection: dry running shortens the pump's life, and a stuck thermostat leads to overheating.
| Symptom | Likely component | What the technician checks |
|---|---|---|
| No steam | heating element, valve | heating and valve flow |
| Water instead of steam | scale, boiler | heating element condition and flushing |
| Hums without heating | pump, heating element | water supply and heating |
| Turns off after 5 minutes | thermostat | protection activation |
| Indicator on with full tank | level sensor | sensor signal |
| Unpleasant odor | scale, overheating | boiler cleanliness |
| Increased noise | pump, valve | pump and valve operation |
The code on a Polaris steam generator display points to a specific component, but the interpretation depends on the model; the technician reads the code along with the unit's behavior.
| Code group | Indicates | What the technician does |
|---|---|---|
| Heating error | heating element, thermostat | checks heating and protection |
| Water level error | level sensor, pump | checks signal and supply |
| Pressure error | valve, pressure gauge | checks for leaks |
| Electronics error | control board | tests the board |
When the tank is full, the indicator is usually wrong because of scale on the water level sensor or dirty contacts, not because the tank itself is broken. The water level sensor signals filling by a change in conductivity or float position, and a layer of scale distorts that signal. The pump may still work fine, but the control board gets false data and blocks steam supply. Scale builds up faster with hard tap water — in Almaty apartments, the water often leaves noticeable sediment after just a few weeks of use. Before replacing the sensor, the technician removes and cleans it: in most cases the signal is restored after cleaning, and no replacement is needed. The connector of the ribbon cable going to the board is checked separately — oxidized contacts produce the same picture as a scale-covered probe.
If the knob turns but the temperature does not change, the problem is in the thermostat or in a stuck valve that keeps steam in one mode. The solenoid valve controls the steam supply from the boiler, and when it is dirty or the stem sticks, it stops shutting off the flow. The thermostat is connected to a temperature sensor that opens the heating circuit when the set temperature is reached; wear on this unit causes constant heating without cut-off. On models with a mechanical regulator, a common cause is contact wear from continuous operation at maximum: gentle use extends the life of the unit. Note the knob position where the steam generator behaves incorrectly — this narrows the check to a single unit. Another sign is steam coming in bursts even when the regulator is set steadily: this indicates a sticking stem, not an electronics failure.
Repair at our service follows a clear procedure — from free diagnostics to leak testing and a warranty on the work. Below we explain each step.
After diagnostics, we agree on the list of work with you, and only then does the technician start restoring and replacing parts. The list includes specific items: heating element, valve, pump, level sensor, as well as descaling the boiler — you see which parts are replaced with new ones and which just need cleaning. Approval happens before disassembly, so the final scope does not change during the process. The technician arrives at your home within 60 minutes, and for complex breakdowns takes the steam generator to the service center. We accept payment in any convenient way, and the warranty is 1 year on labor and parts. Approval before work protects you from unexpected costs: you know in advance which parts are replaced and which are cleaned, and you don't pay for extra operations.
We service Polaris steam generators after the manufacturer's warranty expires, when there is no point in contacting the seller. Post-warranty repair of Polaris steam generators follows the same steps as warranty repair: free diagnostics, approval, replacement of the worn unit — heating element, valve, pump or sensor — and leak testing of the boiler. A unit with an intact body and boiler usually gets back in working order after replacing one part. Our post-warranty work comes with a 1-year warranty on parts and on the repair performed. A technician visit within the city takes up to 60 minutes, and we accept payment in all ways. Post-warranty service is often more cost-effective than buying a new unit if the body and boiler are intact and only the worn unit is replaced — so before deciding to replace, it's worth having the technician diagnose the appliance.
Some Polaris steam generator breakdowns can be fixed right at home, while others require repair at the service center — let's break down which is which.
Replacing the heating element with boiler disassembly, working on the control board, and fixing a cracked tank require conditions for complex operations. The heating element is press-fitted into the boiler body, and removing it without risking damage to the walls is only possible on a disassembled unit. The control board requires soldering and mode testing — such operations are not done at home. A cracked water tank is removed, the crack is assessed, and more often the part is replaced entirely. We take such units to the service center, disassemble the unit, and agree on the work after free diagnostics. A cracked tank is more often replaced than restored: a glued seam on a pressurized container is unreliable and may leak again. After replacement, the unit is tested under load to ensure there are no leaks and steam goes to the nozzle, not into the housing.
| Job | Where performed | What we check after |
|---|---|---|
| Descaling flush | at home | steam supply |
| Valve replacement | at home | sealing |
| Pump replacement | at home | water supply |
| Heating element replacement | at service center | heating and protection |
| Board repair | at service center | mode operation |
| Tank replacement | at service center | no leaks |
Warranty and regular scale prevention are two things that extend the life of a Polaris steam generator. Let's look at both: what exactly the warranty covers and how to tell when it's time to clean the boiler.
We provide a 1-year warranty on labor and parts, so the replaced unit remains protected even after the technician has left. The condition is the same for any Polaris steam generator repair: whether the heating element is replaced, or the control board or steam supply valve is restored. The technician quotes the cost of Polaris steam generator repair after free diagnostics, and the warranty covers both the part itself and how it is installed — this matters because some failures are related not to the part but to the quality of assembly. Technicians with 4 to 20 years of experience install the unit so that the appliance operates normally. The warranty covers both the technician's work and the part itself — if the unit behaves unexpectedly, the issue is resolved under warranty, not at your expense again.
The frequency of cleaning depends on water hardness: the more scale on the heating element, the more often the boiler needs flushing, not once a year by the calendar. In Almaty tap water, hardness salts deposit on the heating element noticeably faster, so focus on the appliance's behavior, not the date in the manual. The first sign is weaker and drier steam, the second is the appliance taking longer to reach mode, the third is the overheat protection triggering. Scale has a chain effect — first steam weakens, then the heating element overheats and the valve clogs, so prevention costs less than replacing parts. If the water is hard, flush the boiler more often; if soft, less often — the technician will advise the exact interval during inspection.
You can carefully rinse the boiler according to the instructions yourself, but disassembling pressurized components and repairing electronics is best left to a technician. Cleaning scale from the Polaris steam generator boiler on your own is acceptable if you use the standard product and do not disassemble the housing. What you should not do is remove the valve, open the pressurized chamber, or tamper with the control board: without experience, it is easy to damage the traces or strip the threads. An unsuccessful DIY cleaning often ends with torn seals and a leak—in that case, servicing costs more than having a technician do the rinse. If you are unsure where maintenance ends and disassembly begins, show the device to a specialist. During free diagnostics, the technician will tell you which operations you can do yourself and which components are best left alone.
To sum up: we covered typical Polaris steam generator failures, how to read error codes, and the procedure for repairing the equipment with a technician.
21brands
The technician services Polaris steam generators and other appliance brands that have dedicated pages on this site.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
Washing machine error codes are self-diagnostic codes that point to a specific component: drain, water fill, heating, motor, or door lock.
29 January 2026 · 13 minutes read












