Open until 19:00+7 (778) 021 13 16Call a technician
Tech Service technician next to a steam generator

Metalnova Steam Generator Repair in Almaty

A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.

  • 1-year warranty on labor and parts
  • 4 to 20 years of experience

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima

Repair prices

  • Diagnostics0 ₸
  • Power cord replacementfrom2 500 ₸
  • Soleplate replacement or cleaningfrom3 000 ₸
  • Button replacementfrom3 500 ₸
  • Water level sensor replacementfrom4 000 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common Metalnova steam generator faults in Almaty

Common symptoms and their causes. The technician gives the exact cause and price after free diagnostics.

PricesPricesTECH SERVICE03

How much Metalnova steam generator repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Power cord replacementparts not included

1–2 hours

from2 500 ₸

Soleplate replacement or cleaningparts not included

1–2 hours

from3 000 ₸

Button replacementparts not included

1–3 hours

from3 500 ₸

Water level sensor replacementparts not included

1–2 hours

from4 000 ₸

Thermostat replacementparts not included

1–2 days

from4 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Metalnova steam generator repair in Almaty

Overheating and protection tripping

1–2 hourstime

from 4 500 ₸cost

Problem
The Metalnova steam generator was overheating, hissing, and tripping the breakers due to stuck contacts in the boiler thermostat.
What we did
The technician removed the old thermostat, installed a new one, and checked the pressure and shutoff during heating.
Result
The steam generator runs without overheating or hissing, and the protection trips correctly.
I want the same
Bork steam generator: overheating and protection tripping — after repairBeforeAfter
01 / 03
All repairs
TECH SERVICE mobile technician with a tool case

How Metalnova steam generator repair works at your home in Almaty

Five steps from request to checking the device.

  1. Requestsame day

    Leave a request — the technician will confirm the address and come over.

  2. Technician visitwithin 60 minutes

    A technician arrives within 60 minutes anywhere in the city.

  3. Diagnosticson site

    The technician checks the power supply, heating element, sensors and pump to find the fault.

  4. Choosing a partbefore repair

    The technician offers an original or compatible part and agrees the choice with you.

  5. Handover and warrantyafter repair

    The device is returned with a warranty on labor and installed parts.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Mobile technician fixing a washing machine at the customer's home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book Metalnova steam generator repair in Almaty

Choose a convenient visit time and payment method — the technician will confirm the details.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 021 13 16
Customer reviewsReviewsTECH SERVICE06

Reviews of Metalnova steam generator repair in Almaty

Гульмира С.Order No. 53581 · 1 March 2024

ours

Приехал без записи, приняли. Выбирал по отзывам в 2ГИС, времени на эксперименты не было. Всё объяснили простыми словами. Приняли технику, выдали квитанцию. Работу сделали в тот же день. Работали аккуратно, ничего не поцарапали. Приняли быстро, объяснили, что и как будет. В общем, доволен!!

Владимир Н.Order No. 413846 · 13 February 2024

ours

Пришёл по записи, всё прошло спокойно. По срокам не подвели. Всё объяснили простыми словами. Работу сделали в тот же день. Цену сказали сразу, без «ну потом посмотрим». Цена не изменилась ни на тенге. Не пришлось ничего доказывать и просить. Отношение нормальное, без высокомерия. Даже настройки не сбились, что удивительно)

Санжар О.Order No. TS-2303-206 · 14 November 2023

ours

Первый раз сюда, до этого чинился в другом месте. Техника на гарантии уже не была, так что выбор был свободный. Работали аккуратно, ничего не поцарапали. Проверили при мне, показали результат. Перезвонили, когда можно было забирать. Работу сделали в тот же день. Приняли технику, выдали квитанцию. Не пришлось ничего доказывать и просить. Приняли быстро, объяснили, что и как будет. Считаю, что нашёл своего мастера!!

Роман З.Order No. ZK-7031 · 17 July 2023

ours

Сервис нашёл случайно, но остался доволен. Было подозрение, что дело в плате, хотелось услышать второе мнение. Сделали ровно то, о чём договаривались. Перезвонили, когда можно было забирать. Не пришлось ничего доказывать и просить. Пять звёзд, не задумываясь.

Азамат Е.Order No. TS-3092 · 8 April 2023

ours

Долго откладывал, но пришлось обратиться. Приняли быстро, объяснили, что и как будет. Сервис нормальный, обращусь ещё

Руслан Д.Order No. TS-7066 · 28 December 2022

ours

Сервис нашёл случайно, но остался доволен. Позвонил в три места, здесь единственные назвали цену сразу. Проверили при мне, показали результат. Дали гарантию и рекомендации на будущее. Работали аккуратно, ничего не поцарапали. Диагностика заняла минут двадцать. Приняли технику, выдали квитанцию. С чистой совестью советую.

Дамир И.Order No. 26155 · 16 June 2021

ours

Позвонил утром, к обеду уже всё решили. Приняли технику, выдали квитанцию. Работали аккуратно, ничего не поцарапали. Не пришлось ничего доказывать и просить. Запчасть нашли без проблем. Рекомендую.

Серик М.Order No. 2018-1392 · 30 September 2018

ours

Сервис нашёл случайно, но остался доволен. Диагностика заняла минут двадцать. Работали аккуратно, ничего не поцарапали. Приняли быстро, объяснили, что и как будет. Приняли технику, выдали квитанцию. По срокам не подвели. Дали гарантию и рекомендации на будущее. Починили и дали гарантию на месяц.

Александра Н.Order No. 2018-2368 · 5 July 2018

ours

Приехал без записи, приняли. Сергей Москоленко подсказал, как продлить жизнь технике

Максим Ю.Order No. ZK-2016/976 · 31 October 2016

ours

Обращался в сервис по совету знакомых. Дамир М не стал навязывать дорогую запчасть, поставил нормальную. Приняли быстро, объяснили, что и как будет. Всё объяснили простыми словами. С чистой совестью советую)

See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about Metalnova steam generator repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
What causes Metalnova steam generator breakdowns, and which parts fail most often?

Most often it's scale: it clogs the channels and takes out the heating element, water level sensor, and valve. Less common are worn seals, the pump, and electronics. The technician will pinpoint the exact part during free diagnostics.

Why does my Metalnova steam generator hum but not heat the water?

A hum with no heating usually points to a faulty heating element or a pump that's moving water but not heating it. It depends on the model: sometimes the thermostat or sensor is the cause. The technician will check the parts on site.

How can I tell if the water level sensor in my Metalnova steam generator has failed?

The unit turns on but no steam comes out, or it comes out in bursts, and the indicator blinks or shows an error. It depends on the model: on some, the sensor simply won't let heating start. Diagnostics will show whether it's the sensor or scale.

Can a Metalnova steam generator be repaired if it's leaking from the bottom?

Yes, most often it's worn seals or a clog causing overflow. The technician will replace the gaskets and stop the leak. Continuing to use the unit with a leak is dangerous.

How is repairing Metalnova steam generators in Almaty with direct technicians different from going through an aggregator?

Tech Service is a direct provider: your unit is handled by our own technician, not an intermediary who passes the request to third parties. Diagnostics are free, and we're at your door within 60 minutes in the city. We provide a 1-year warranty on labor and parts.

What should I do if my Metalnova steam generator turns off by itself during operation?

Most likely the safety protection is kicking in due to scale, overheating, or a faulty thermostat. Let the unit cool down and don't turn it back on until the technician arrives. Diagnostics will pinpoint the cause.

Repair guideArticleTECH SERVICE08

Metalnova steam generator repair in Almaty by Tech Service's own technicians

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs Metalnova and Eurometalnova steam generators in Almaty: our technician arrives at your home within 60 minutes or takes the equipment to our service center. Diagnostics are free, 1-year warranty on labor and parts, and you can pay with Kaspi QR, Kaspi Red, card, cash, or bank transfer. The technician quotes the price after diagnostics.

Why Metalnova steam generators break down and what we check first

Metalnova steam generators fail predictably: most service calls are related to scale, the heating element, and sensors. Let's break down which symptom points to which component and what to check before the technician arrives.

Steam generator produces no steam — heating element or scale

Most often, steam disappears due to scale on the heating element or a clogged valve, and during free diagnostics we check both components. Deposits settle on the coil in a thin layer and act as thermal insulation: the element heats up, but the heat doesn't reach the water, and the valve becomes encrusted with salts and stops letting flow through. During disassembly, the technician removes the coil, assesses the thickness of the layer, and blows through the valve, then after reassembly checks the pressure in the boiler. If steam doesn't return after a simple cleaning, the technician will discuss Metalnova steam generator repair in Almaty with you and outline the next steps. Metalnova models with a stainless steel tank handle hard water more easily, but they also need regular maintenance. If steam returns after cleaning but weakens within a month, the cause is the water, and it's worth discussing tank protection with the technician rather than replacing the element.

Leaking from the bottom, humming, turning off by itself

A leak from the bottom is usually caused by a worn seal or boiler overflow, while humming and spontaneous shutdown point to the pump or thermostat. Seals harden over time and lose elasticity, water finds a path along the seam, and overflow occurs when the level sensor fails to shut off the flow in time. Humming often comes from the water pump: the bearing wears out, the impeller rubs against the housing. The thermostat may also trigger earlier than the threshold and cut off heating — the unit turns off even though the water hasn't reached the required temperature. The symptom 'turns off after pressure builds up' is more dangerous than others: if the valve doesn't activate, the load on the boiler increases, so it's better not to run such equipment until the technician arrives and to call a specialist immediately.

Table of symptoms and likely components

SymptomLikely componentWhat we check
No steamHeating element, steam supply valveheating, valve patency
Weak steam supplyScale, water supply pumpheating element condition, pressure
Leaking from the bottomSeals, boilertightness, overflow
Not heatingHeating element, thermostatheating element resistance, thermostat activation
Turns off by itselfThermostat, temperature sensoractivation threshold
Hums and doesn't heatWater supply pumppump operation

What Metalnova error codes and flashing indicators mean

The steam generator's indicators hint at which component to look for the cause of the failure. Let's break down what flashing means and how not to confuse a scale signal with a sensor failure.

Flashing indicator — what it signals

A flashing indicator on Metalnova steam generators most often signals a malfunction or the need for cleaning, and we decode it during diagnostics for the specific model. On units of this brand, the light on the panel is connected to the level sensor: when contacts are dirty or the sensor fails, the signal becomes intermittent, and sometimes the indicator flashes in series with a pause. During free diagnostics, the technician compares the flashing rhythm with the error code table for your modification, checks the sensor itself with a multimeter, and inspects the contacts on the control board. Based on the signal pattern — frequent flashing, rare, in series — the specialist narrows it down to two or three components even before disassembling the housing: this way the check takes less time than going through all elements one by one. Don't ignore this behavior and don't top up water 'by eye': if the sensor is wrong, the boiler may overflow, and then a leak onto the floor will be added to the incorrect indication.

How to tell if the water level sensor has failed

If the water level indicator doesn't turn off after filling or comes on when the boiler is empty, the sensor is likely faulty. The sensor monitors the boiler fill and sends a signal to the control board: when working properly, the light goes out right after the liquid reaches the required level. Scale on the electrodes distorts conductivity — the board receives a false signal that there is too little or too much water in the chamber. A second sign is the steam generator humming but no steam coming out, even though there is water in the tank. A third is the unit shutting off by itself shortly after start, as if a protection has tripped. The level sensor is often indirectly "to blame": scale clogs it, so replacing it without cleaning the boiler leads to another breakdown soon after — first the sensor is removed, the chamber is rinsed, then a new one is installed.

What to do before the technician arrives

  • Unplug the unit: pull the plug from the socket and don't leave the appliance under residual pressure.
  • Note the indicator signals: how many times and at what interval the light on the panel blinks, and what actions trigger it.
  • Don't take the casing apart: without tools it's easy to damage sensors and seals, and then you'll have to look for replacements.
  • Drain the water if it's leaking: place a container underneath and move the appliance away from furniture and baseboards.
  • Describe the symptoms to the technician: your notes will help them narrow down the causes faster and bring the right parts.

How diagnostics and steam generator repair work

Service starts with free diagnostics, and after that everything depends on the component. Here's how the process works and what can be done on-site versus what's better done at the service center.

Free diagnostics step by step

During free diagnostics we check heating, pressure, and sensors in sequence to find the root cause, not just the symptom. First the technician measures the heating element's resistance and compares it with the norm for the specific Metalnova model, then checks the temperature sensor readings and the pressure gauge behavior when reaching operating mode. The steam supply valve is tested separately: sticking or partial blockage distorts pressure and can masquerade as a heating failure. These measurements show whether the boiler needs to be opened and descaled, and how advanced the scale is on the heating element. Diagnostics are valuable because they show the limit of DIY work: some components can only be checked after opening the casing, and then the technician suggests service. The measurements take little time but immediately rule out unnecessary operations and extra costs.

What we do on-site and what at the service center

Some work we do on-site, while opening the boiler and replacing the heating element are more often done at the service center so the client isn't left without the appliance longer than necessary. On a visit, the technician replaces the steam supply valve, checks sensors, fixes leaks at connections, and does external cleaning. Anything that requires opening the casing and accessing the boiler is better done where there's a workbench and proper lighting. A technician visit within the city takes up to 60 minutes, so on-site diagnostics are usually scheduled for the earliest convenient time. The format of work depends not on the complexity of the breakdown but on whether the casing needs to be opened: if so, it's more convenient to bring the unit to the service center, where there's space and tools.

What services are included

WorkComponentWhat we check after
Descalingheating element, boilerheating and steam output
Heating element replacementheating elementresistance, heating
Level sensor replacementwater level sensorcorrect indicator operation
Valve replacementsteam supply valvepressure and steam output
Seal replacementgaskets, boilertightness

Scale and cleaning of Metalnova steam generators

Scale is the most common cause of breakdowns in Metalnova steam generators. Let's look at how often to clean the unit, what you can realistically do yourself, and why after cleaning the appliance sometimes works worse than before.

How often to descale

We determine how often to clean based on water hardness and usage intensity, not by the calendar, and during diagnostics we suggest the right interval for your case. Deposits form in a thin layer on the heating element and boiler walls, which reduces heat transfer: the heater takes longer to heat, uses more energy, and gradually overheats. The harder the water, the faster the layer grows, so in households that use the appliance daily, the boiler should be checked more often than with seasonal use. A descaling filter slows down deposit formation but doesn't eliminate maintenance entirely: the cartridge needs regular replacement, otherwise it becomes a source of suspended particles. Our technician on site assesses the condition of the heating element and gives you a realistic interval between cleanings for your usage pattern. Hard water in Almaty speeds up deposit formation, so with active use the interval between cleanings is noticeably shorter than with seasonal use. If maintenance doesn't help and the breakdown repeats, Metalnova steam generator repair is needed — the technician will check the unit that regular cleaning didn't address.

Can I clean it myself

The owner can do light maintenance, but disassembling the boiler and removing a thick layer of deposits is best left to a technician. Rinsing according to the instructions and timely replacement of the descaling filter extend the life of the heating element and require no tools. However, removing the boiler, accessing the heater, and cleaning the inner walls involves disassembling the housing and seals: without experience, it's easy to damage the gaskets or reassemble the unit loosely, and then the appliance will start leaking steam. Mechanical cleaning with a scraper on a dry heating element leaves scratches where deposits settle faster, and acidic solutions left too long corrode the boiler metal. DIY cleaning doesn't replace diagnostics: if the breakdown repeats afterward, the cause is usually not deposits but a unit that wasn't checked.

Why it got worse after cleaning

If the steam generator works worse after cleaning, most often the seal is damaged, the sensor is knocked off, or suspended deposits remain in the system. With careless reassembly, the gasket sits crooked and steam pressure drops; the water level sensor may show incorrect readings after disassembly; loosened particles clog the steam supply valve. Scale reduces heating and steam output gradually, while cleaning mistakes cause a sharp deterioration immediately. In our practice, we handle such cases by checking the steam supply and inspecting the gaskets — often it's enough to adjust the seal and flush the valve. This is almost always the result of incomplete disassembly: deposits aren't fully washed out, and their remnants clog the valve, so cleaning should be finished with a steam supply check.

Who will come, on what terms, and how Metalnova differs from Eurometalnova

Here we explain who exactly will come to your appliance, on what terms the service operates, and how servicing the Metalnova line differs from the related Eurometalnova.

A direct provider, not an aggregator

Tech Service is a direct provider: our technician comes to you, not a middleman from an aggregator, and he handles the work from diagnostics to final check. Our technicians have 4 to 20 years of experience, and a city visit takes up to 60 minutes. One person is responsible for the entire process: inspects the steam generator, finds the cause, agrees on the work, and checks the result under steam pressure. A middleman between you and the technician only passes on the request, and you have to deal with a repeat breakdown directly. The difference shows in the warranty: the middleman is responsible for the technician, while we are responsible for the work and parts, so if a breakdown repeats, we handle it ourselves. When you request service, ask who exactly will come and who provides the warranty — the answer immediately tells you whether you're dealing with a provider or a dispatcher. For Metalnova steam generator repair, the technician gives the price after free diagnostics, so the total is clear before work begins.

Warranty, diagnostics, and payment

We give a 1-year warranty on labor and parts, diagnostics are free, and the technician quotes the price after diagnostics. We accept Kaspi QR, Kaspi Red, card, cash or bank transfer for companies, so you can pay in the way that suits you. The cost of restoring Metalnova steam generators depends on the unit: replacing a seal is one thing, opening the chamber and descaling the heating element is another. The technician first shows you the cause and scope of work, and only then names the price, so there are no surprises at the end. The warranty on parts is just as important as the warranty on labor: if a part fails before its time, it will be replaced under the same warranty. Ask for both the labor and the installed part to be listed separately in the warranty—otherwise, any dispute about what exactly broke will be on you.

How Metalnova differs from Eurometalnova

Metalnova and Eurometalnova are related lines with similar construction but different typical weak points, so diagnostics take the specific model into account. Both have a tank, heating element, and steam supply valve, but the units are built differently, and the same symptom in the two lines points to different components. In practice, the difference shows up in symptoms: Eurometalnova owners more often complain about a leak from the bottom, while Metalnova owners report loss of steam, and this sets the direction for inspection. Seals and the steam supply valve wear differently, so the technician checks the appliance's behavior against the model rather than fixing a 'steam generator in general.' We also service the related Eurometalnova line, so if you switch to a similar model, our service experience carries over. Give the technician the exact model—they will prepare the necessary parts in advance and won't waste a visit on clarifications.

How to approach Metalnova steam generator repair

We've covered what determines the outcome of steam generator repair: what the exact diagnosis depends on, why you should note the indicator signals, and why preventive maintenance costs less than replacing components.

  • A symptom is not a diagnosis: loss of steam, leaks, and humming point to different components, and only disassembly reveals the exact cause.
  • Indicator signals help: a blinking light narrows down the causes if you note exactly how it blinks.
  • Scale is the main enemy: regular cleaning extends the life of the heating element and boiler more than any intervention.
  • The scope of work depends on disassembly: some tasks are done on-site, while boiler disassembly is done at the service center.
  • Warranty on parts matters: it protects you from repeat failures caused by a faulty part.

21brands

Besides Metalnova, we repair other steam generator brands in Almaty

Our technicians work with Metalnova steam generators and other brands. Below are the brands with dedicated pages on the site.

We also repairWe also repairTECH SERVICE09

Besides Metalnova steam generator repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before Metalnova steam generator repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp