experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (775) 030 02 94Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics.
Our own technicians4 to 20 years of experience




Repair prices
Below are typical symptoms and likely causes. The technician will pinpoint the exact cause during free diagnostics.
heating element, thermostat, wiring
from4 000 ₸
plug, outlet, circuit breaker, power supply
from3 000 ₸
heating element, temperature sensor, thermostat
from5 000 ₸
faulty heating element, fan, or thermostat
from9 000 ₸
fan, loose mounting
from9 000 ₸
worn heating element, poor contact, temperature sensor
from4 000 ₸
heating element breakdown, wiring short circuit
from3 000 ₸
relay, starting automation
from4 000 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1 visittime
from 4 000 ₸cost

BeforeAfter5 steps

From request to checking the stove after reassembly.
Describe the symptom and stove model so the technician brings the right tools.
The technician arrives anywhere in the city within 60 minutes after the request is confirmed.
Approval of the scope of work and the final amount before repair begins.
You approve the scope of work and the part, then the technician performs the repair.
Checking the stove after reassembly: which modes and burners are tested, and what to look for on first power-up.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Specify the stove model and what exactly is happening: not heating, clicking, not holding temperature. Based on your description, the technician will select the tools and parts.

Warranty question? Call us
+7 (775) 030 02 947 898 reviews of repairs at TECH SERVICE in total
Богдан С.Order No. ZK-2026/617 · 17 April 2026
oursТехника на гарантии уже не была, так что выбор был свободный. Проблема — не работает духовка. Сделали и забыл про проблему.
Андрей П.Order No. 2026-8278 · 29 March 2026
oursСкажу прямо: ожидал худшего. Проблема — выбивает. Назвали 9 000 сразу, в конце сумма не изменилась. Поставили новую деталь: блок. Мастер сам перезвонил, когда появилась запчасть. Сделали аккуратно, следов разборки не видно.
Куаныш Б.Order No. ZK-2025/553 · 9 December 2025
oursПроблема — выбивает. Радик Т помог выбрать, без навязывания. Нашёл Tech-service в 2ГИС, поехал по адресу. Внешне как новый, если не считать мелкой царапины.
Марина В.Order No. ZK-5769 · 12 January 2025
oursВыбирал по отзывам в 2ГИС, времени на эксперименты не было. С чем пришёл: выбивает. Ребёнок уже проверил на прочность, держиться.
Аида Т.Order No. 221673 · 13 November 2024
oursДруг посоветовал, у него похожая история была. Основная жалоба — не работает духовка. Работает даже тише, чем до поломки)
Полина В.Order No. 89848 · 29 August 2024
oursПозвонил в три места, здесь единственные назвали цену сразу. Нагрев в норме, посторонних звуков нет)
Жасмин Р.Order No. ZK-3151 · 15 June 2023
oursХотел сначала вызвать мастера на дом, потом передумал. Сначала думал, что ерунда, но появилось: не работает духовка. Отдельно скажу про мастера: Радик Т — спокойный, без лишней суеты. Поменяли: конфорка. Сначала сказали одно, потом уточнили, но в итоге всё совпало. Сказать, что доволен — ничего не сказать)
Гульмира С.Order No. TS-2303-526 · 11 April 2023
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. Внешне как новый, если не считать мелкой царапины.
Бакыт Ж.Order No. TS-4826 · 5 September 2022
oursДо этого обращался в другой сервис, там только развели руками. Сначала сомневался, мало ли что. Основная жалоба — не работает духовка. Заявку приняли по телефону, перезвонили через десять минут. Заодно поменяли: термостат. Заплатил 13 500, и не жалею. Спасибо, выручили. Пользуюсь ежедневно, вопросов нет.
Максат О.Order No. 2017-1307 · 20 January 2017
oursДруг посоветовал, у него похожая история была. Диагностика плиты — с этого всё началось. Симптом был очевидный: не греет конфорка. Запчасть была в наличии, доплачивать не пришлось. Диагностику сделали бесплатно, хотя я был готов платить. Нагрев в норме, посторонних звуков нет.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionIt depends on the problem: a cracked glass or a burnt-out heating element can be replaced, and the cooktop keeps working. Replacement makes sense when the body is damaged or the control module can't be repaired — the technician will tell you after diagnostics.
Yes, a Tech Service technician comes to your home anywhere in the city within 60 minutes. On site, they run free diagnostics and fix most issues; complex cases are taken to the service center.
Yes, it's a sign of current leakage or a short circuit in the wiring or heating element. Continuing to use such a cooktop is risky — unplug it and call a technician.
Usually yes: the glass-ceramic surface can be replaced separately if the frame and body are intact. Whether it's possible depends on the model, so the technician will confirm after inspecting the cooktop.
Often it's enough to repair the ribbon cable or contacts on the touch board, and the cooktop works again. If the control module itself is damaged, it's replaced — the decision is made after diagnostics and depends on the model.
The technician turns on the cooktop and checks the burners, oven, and control panel under load. The work and parts come with a 1-year warranty.
Tech Service repairs Bosch electric stoves in Almaty: our technician arrives at your home within 60 minutes or takes the appliance to the service center. Diagnostics are free, 1-year warranty on labor and parts, and the technician quotes the price after diagnostics. We work with glass-ceramic, induction, and Bosch ovens.
If your Bosch stove won't turn on or shows a code, it's a signal from the control module—not just "broken." Here's what the codes mean and what to check before the technician arrives.
A symbol on the Bosch screen points to a specific component—heating, temperature sensor, or control board—and it immediately tells the technician which circuit to check. Combinations with the letter E and numbers describe the state of the temperature sensor, heating element, and power section. This mark appears after self-diagnosis at power-on or when a circuit goes out of operating range. The decoding depends on the series and model: the same set of symbols on different lines describes different components. Our technician cross-references the code with the documentation for the specific model, not just a generic symbol table—so the check goes straight to the right circuit without unnecessary disassembly. In my view, model-specific decoding saves the most time: the same mark on neighboring lines leads to different parts, and a universal cheat sheet only confuses things.
Spontaneous shutdown is most often due to the module's overheat protection—the cooling fan can't keep up or the sensor sends a wrong signal. The Bosch power board sits behind the panel and heats up during prolonged oven use and multiple burners at once. When the temperature inside the housing exceeds the threshold, the electronics cut heating to avoid burning expensive components. A worn fan, dust-clogged cooling channels, and a failed temperature sensor produce the same picture—the appliance runs for a few minutes and shuts off. If it starts again after a pause, it's thermal protection, not a power grid failure: the component is running at its limit, and you shouldn't delay diagnostics. In our practice, this picture almost always means a dust-clogged air duct—cleaning the cooling channels restores normal operation more often than replacing the board.
Each symptom on a Bosch stove points to its own component—burner, wiring, oven, or sensor. Below is the chain: what you see → what's likely broken → what the technician does.
If a Bosch burner doesn't heat or heats weakly, the cause is usually the heating element under the glass or a temperature sensor that isn't sending the heating command. The heating element (TEN) is responsible for heating the burner, while the temperature sensor reads the temperature and adjusts power; if one fails, the zone stays silent or runs at minimum power. Our technicians perform free diagnostics by testing the coil and checking the sensor signal at the board, so they don't replace a working component. Bosch electric stove repair in such cases usually comes down to replacing the heater rather than working on the electronics. Weak heat at the edge of the burner with a hot center is a sign of uneven heater wear, not surface contamination, so cleaning won't help here.
When the breaker trips as soon as you turn on a Bosch stove, it points to a leak or short circuit in the wiring and terminal connections, not the burner itself. Wiring and terminal connections can cause the breaker to trip on power-up when insulation is overheated, a contact is burnt, or moisture gets into a terminal. The circuit breaker trips before the heating element can be damaged — and that's a good sign: the protection worked. The technician opens the terminal box, checks the connections and insulation integrity, and tests the circuit under load. If the breaker trips only when the oven is turned on and the burners work, look for the problem in the oven heating circuit — this narrows diagnostics to a single component and saves time on disassembly. They also check the moisture protection of the terminal box: after mopping the floor or a leak, water gets on the contacts and causes a leak that's only visible when disassembled. The technician dries the connections, inspects the insulation, and retightens the terminals so the line can handle the load.
| Symptom | Likely component | What the technician does |
|---|---|---|
| Oven cold, burners heat | Oven heating element | Tests the coil and circuit |
| Heats but temperature doesn't hold | Thermostat | Compares sensor reading with actual |
| Heat escapes around the door | Hinges and seal | Checks pressure and gaps |
| Touch sensor not responding | Touch panel, control module | Tests the ribbon cable and board |
Bosch glass-ceramic and induction cooktops are built differently, so the repair approach differs too. Let's look at the design of both surfaces and how the heating type affects diagnostics and the scope of work.
| Surface type | How it heats | What breaks most often | What we check |
|---|---|---|---|
| Glass-ceramic | Heating element under glass transfers heat | Heating element, wiring | Coil resistance, power circuit |
| Induction | Magnetic field of the coil | Induction module, sensor, touch control | Coil, sensor, control board |
| Glass-ceramic with oven | Burner element and oven element | Zone heating element, thermostat | Heating element, oven thermocouple |
| Induction with touch controls | Coil field and touch block | Touch panel, module capacitor | Touch sensor, capacitors, coil |
If a Bosch induction cooktop doesn't detect the pot, first check the cookware — the bottom must be ferromagnetic and the diameter should match the heating zone. If a magnet sticks to the bottom, the cookware is suitable; if not, the cooktop simply won't start heating, and that's not a malfunction. Next, check the touch panel: sometimes a zone doesn't respond due to dirt or moisture under the glass, and wiping and drying the surface is enough. When the induction module still doesn't start heating with suitable cookware, the problem is in the sensor or coil — and that's electronics work, not a cookware replacement. Our diagnostics are free, and a technician arrives within 60 minutes anywhere in the city to pinpoint the component. In my experience, half of the 'doesn't detect the pot' calls are resolved by checking the cookware before we even go out.
Bosch glass-ceramic surfaces are replaced when cracked, and the heating element is replaced when a zone stops heating; both jobs are done after diagnostics so a working part isn't swapped out. The surface transfers heat from the element to the cookware, and chips or cracks disrupt that transfer — the zone heats unevenly or doesn't turn on at all. The heating element is checked for resistance: a broken coil is obvious right away, while a partial failure gives weak heat instead of full power. A crack in the glass isn't just cosmetic: moisture gets through it to the element and wiring, so putting off surface replacement is risky. We provide a 1-year warranty on labor and parts, and accept payment any way you like. If there's a crack, don't wait for the zone to stop working — moisture under the glass speeds up corrosion of the wiring.
We work as a direct provider: our own technician comes to you, not a middleman from a marketplace. Here's how repair works at home and at the service center.
We service Bosch electric stoves at your home or at the service center — a technician arrives within 60 minutes anywhere in the city and decides on the spot whether to fix it at your place or take the appliance in. Bosch electric stove repair in Almaty is done both at home and in the workshop, so the decision depends on the part: sensors, burners, and wiring are replaced right in your kitchen, while the control module or glass-ceramic surface is easier to work on in the workshop with a proper table and lighting. Diagnostics are free — you pay only for the approved work. Our own employee comes to your home, not a middleman's courier, so the same person runs the check and approves the work: you don't have to explain the problem to a second technician. When you call, have the model and the error code from the display ready — the technician will prepare the right tools in advance.
Our technicians have 4 to 20 years of experience, and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies — Bosch appliances require careful work with electronics, and experience directly affects the result. The challenge with Bosch is that the control module is connected to the burners, oven, and sensors, so a diagnostic mistake leads to unnecessary replacements — an experienced technician checks the circuit first and only then replaces the part. In my view, that's why with this brand accuracy of the first measurement matters more than speed: a wrong step in the chain leads to a false conclusion and extra costs. You can pay via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies — you choose on the spot. Ask the technician on site which method is convenient — it's settled right away, with no trips to the office, and it doesn't delay the work itself.
Warranty and parts determine how much you can trust a service after the repair. The 'fix or replace' criteria help you decide what to do with your Bosch stove next, whether the breakdown has already been fixed or is still ahead.
We give a 1-year warranty on labor and parts — if the unit fails again after repair, we fix it under warranty at no extra charge. This applies to the heating element, the control module, and the touch panel — the 1-year warranty covers both labor and parts. A warranty on parts is just as important as on labor: a failed part is not your problem but the service center's responsibility. Our technicians have been working with Bosch appliances for 4 to 20 years and know which components tend to fail repeatedly and which last long after replacement. Before agreeing to a repair, ask exactly what the warranty covers — labor, the part, or both: this prevents most disputes down the road.
When servicing Bosch appliances, we select parts for the specific model, and we discuss with you whether they are original or compatible before installation. The control module, heating element, temperature sensor, and touch panel differ in connectors and mounting points across Bosch series, so the part is chosen by model number, not by guesswork. The technician quotes the price after free diagnostics — and at that point explains which part options are available for your case and how they differ in lifespan. A compatible part may fit the connector but have a different service life, so it's better to agree on the part choice in advance rather than silently installing 'whatever is available.' In our practice, owners sometimes learn about a compatible part only after the repair — and that leads to questions that could have been avoided with one conversation before installation.
Diagnosing a Bosch electric stove comes down to a few key points that help the owner make a decision before the technician arrives and avoid overpaying for unnecessary work.
30brands
Choose a brand to see the page with a description of the work and common issues.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your oven isn't working, first check the outlet, the circuit breaker in the panel, and the selected mode, then assess the symptom: not heating…
3 October 2025 · 12 minutes read
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read












