experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (775) 030 02 94Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics.
Our own technicians4 to 20 years of experience




Repair prices
The symptoms that most often prompt a technician call, and their likely causes.
heating element, switch, wiring
from4 000 ₸
heating element, thermostat, wiring
from5 000 ₸
thermostat, sensor, wiring
from5 000 ₸
worn contacts, wiring, switch
from4 000 ₸
thermostat, heating element, wiring
from5 500 ₸
thermostat, switch, wiring
from4 000 ₸
plug, outlet, wiring
from4 000 ₸
switch, heating element, wiring
from3 000 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1 visittime
from 5 000 ₸cost

BeforeAfter5 steps

Five steps from request to checking the stove's operation.
Describe the symptom; the technician will clarify details and arrange a visit.
The technician confirms a convenient visit window and the scope of work based on the symptoms.
The technician finds the cause and quotes the repair cost.
Work is carried out after you agree to the price and the part.
The technician demonstrates the burners and oven heating and explains how to use the stove after repair.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Tell the technician your Artel stove model and series so they can select a compatible part for the repair.

Warranty question? Call us
+7 (775) 030 02 947 898 reviews of repairs at TECH SERVICE in total
Андрей П.Order No. 2026-8278 · 29 March 2026
oursСкажу прямо: ожидал худшего. Проблема — выбивает. Назвали 9 000 сразу, в конце сумма не изменилась. Поставили новую деталь: блок. Мастер сам перезвонил, когда появилась запчасть. Сделали аккуратно, следов разборки не видно.
Куаныш Б.Order No. ZK-2025/553 · 9 December 2025
oursПроблема — выбивает. Радик Т помог выбрать, без навязывания. Нашёл Tech-service в 2ГИС, поехал по адресу. Внешне как новый, если не считать мелкой царапины.
Аида Т.Order No. 221673 · 13 November 2024
oursДруг посоветовал, у него похожая история была. Основная жалоба — не работает духовка. Работает даже тише, чем до поломки)
Полина В.Order No. 89848 · 29 August 2024
oursПозвонил в три места, здесь единственные назвали цену сразу. Нагрев в норме, посторонних звуков нет)
Бакыт Ж.Order No. ZK-2023/229 · 26 November 2023
oursДруг посоветовал, у него похожая история была. Проверил дома — всё на месте, ничего не забыли.
Жасмин Р.Order No. ZK-3151 · 15 June 2023
oursХотел сначала вызвать мастера на дом, потом передумал. Сначала думал, что ерунда, но появилось: не работает духовка. Отдельно скажу про мастера: Радик Т — спокойный, без лишней суеты. Поменяли: конфорка. Сначала сказали одно, потом уточнили, но в итоге всё совпало. Сказать, что доволен — ничего не сказать)
Дамир И.Order No. ZK-4722 · 4 January 2023
oursДруг посоветовал, у него похожая история была. С чем пришёл: не работает духовка. Пользуюсь ежедневно, вопросов нет)
Диана М.Order No. TS-7409 · 29 April 2020
oursНужен был счёт и чек, у нас техника на балансе организации. Основная жалоба — не работает духовка. Включил, проверил, работает.
Фарида К.Order No. TS-1911-950 · 18 January 2019
oursПробовал найти мастера в своём районе, но все были заняты. С чем пришёл: не греет конфорка. Работает как раньше, придирок нет
Сабина Г.Order No. TS-5105 · 29 August 2017
oursАсығыс болмасам да, бір күнде бітіретінін айтты. Ұсынамын, текке ақша алмайды.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionIt depends on the model and the type of fault: sometimes individual board components or the ribbon cable are restored, sometimes the module is replaced entirely. The technician will determine this after disassembly and an on-site check.
Both components are tested separately: the heating element and burner are checked for continuity, while the thermostat is tested for activation when heated. Without instruments, it's hard to distinguish them by external signs, so diagnostics are needed.
Yes, it's dangerous: clicking along with the breaker tripping indicates a short circuit or insulation breakdown. You shouldn't use such a stove — unplug it from the mains and call a technician.
The code points to a specific component — sensor, heating, or control board — but the interpretation depends on the model. In Almaty, it's worth calling a Tech Service technician: they will read the code and check the cause on site.
Yes, Tech Service accepts Artel stoves for repair even after the factory warranty. The technician comes to your home or repairs it at the service center, and the work is covered by a 1-year warranty.
It depends on the model and the condition of the contacts: sometimes the switch can be repaired, but more often it's replaced with a new one. The technician will tell you which is more cost-effective in your case after free diagnostics.
Tech Service repairs Artel electric stoves in Almaty: our technician arrives at your home within 60 minutes or takes the stove to the service center. Diagnostics are free, 1-year warranty on labor and parts, and you can pay with Kaspi QR, Kaspi Red, card, cash, or bank transfer. The technician provides the cost after diagnostics. We work with burners, touch controls, glass-ceramic, and ovens.
Artel electric stoves break in predictable ways — the symptoms can narrow down the faulty parts even before the technician arrives. Here's what fails most often and how it shows.
If an Artel electric stove won't turn on, our technician first checks the power supply, the breaker in the panel, and the wiring integrity — these account for a noticeable share of calls. The circuit breaker trips on current leakage or a short circuit, and a burnt contact in the outlet cuts power to the whole line regardless of the control board's condition. The inspection starts with the outlet and terminals: the technician tests the cable, checks the screw tightness, and only then opens the case to reach the electronics. A dedicated kitchen line with tightly tightened terminals eliminates half of such calls — a weak contact heats up and eventually burns out. Often a "dead" stove turns out to be fine — the breaker tripped due to line overload or a burnt outlet contact, and the fix comes down to restoring power rather than replacing components.
When an Artel burner doesn't heat or heats weakly, we check the heating element, thermostat, and switch — by the symptoms the technician distinguishes a burnt-out heater from a stuck thermostat. The heating element is responsible for heating the cooking zone, and its open circuit is visible as no resistance on the multimeter. Burner switches on cast-iron cooking zones burn out over time and stop supplying voltage even though the heater itself is intact. Diagnostics go from simple to complex: first continuity testing, then checking the regulator, and only then disassembling the panel. A weak glow of the coil or slow heating usually indicates a partial break in the heating element, while complete absence of heat points to an open circuit in the switch. If the burner heats but doesn't turn off and overheats cookware, the issue is more often the thermostat, not the heater — replacing just the heating element won't help here.
If an Artel stove trips the breaker, we look for current leakage or a short circuit in the heater and wiring, and we replace cracked glass-ceramic completely — cracks are not repaired. The glass-ceramic surface loses its seal when chipped or cracked, and the cooking zone beneath becomes dangerous when moisture gets in. A heater with damaged insulation causes leakage to the body, and the breaker trips immediately after switching on, while a wiring short shows up as the line heats up. A crack from overheated cookware and a crack from an impact look the same, but in both cases a careful replacement is needed for a crack, with the seating area checked. A repeated breaker trip after repair signals that the cause wasn't fully eliminated, so we test the burners and oven under load before handing the stove back.
The display of an Artel electric stove shows an error code, but it points to a specific component. Here's how to read the stove's signals and what happens during free diagnostics.
An error code on the display of an Artel electric stove indicates the component where the fault is — it helps the specialist narrow the search to a sensor, thermostat, or control board even before disassembly. The control board distributes power to the burners and oven, so its signals read like a fault map: some combinations relate to the heating circuit, others to the temperature sensor, and some buttons and indicators are tied to the same board. The thermostat is responsible for the heating threshold, and its failure often masquerades as a broken heater — the burner heats but doesn't reach the set mode or doesn't turn off in time. The temperature sensor gives incorrect resistance, and the automation goes into protection. The same code can mean different things depending on the model, so the decoding is checked against the specific stove's documentation, not just a general list.
Our diagnostics are free: a technician arrives within 60 minutes, checks the electrical components and wiring, tests the burners and oven, and identifies the cause of the breakdown. A technician with 4 to 20 years of experience works on the control board, sensors, and heating elements of Artel appliances and comes as a direct contractor — no middlemen between you and the fix. In the city, home visits are arranged within an hour, so the inspection doesn't drag on for days, and evening calls don't turn into a queue of requests. The cost of work is quoted after the inspection, and payment is accepted in any convenient way. Diagnostics aren't just about finding the fault — they show whether the stove is worth repairing at all, and the technician will honestly tell you if replacing a component isn't advisable.
| Symptom | Likely cause | What the technician does |
|---|---|---|
| Burner doesn't heat | Burnt-out heating element or switch | Checks the heater and contacts |
| Heats but doesn't turn off | Stuck thermostat | Tests the thermostat |
| Trips the circuit breaker | Current leakage, short circuit | Looks for a fault in the wiring |
| Touch controls unresponsive | Panel or board malfunction | Checks the control unit |
| Crack in the glass-ceramic surface | Mechanical damage | Assesses surface replacement |
The touch panel, glass-ceramic surface, and oven are components in Artel stoves that require a special approach. Here's what we repair and what we replace, and how that affects the warranty.
We first check the Artel touch panel at the level of contacts and the ribbon cable, and only replace the unit if the board itself is faulty — repairing blindly costs more. The panel sends commands to the control unit via the ribbon cable, and most often the failure lies in the connector: oxidation, a loose contact, or a microcrack in the trace. The technician tests the circuit with a multimeter, checks the connector seating and the integrity of the conductive traces, and also looks for signs of overheating in the power connector. Replacing the unit is justified when the controller is blown or a trace under the touch sensor itself is burnt — then soldering the board is impractical and won't give a stable result. We also check the touch response across the entire area: if one sector is unresponsive while the others work, it's a local damage to the touch layer. If the panel "sticks" after a wet cleaning, the cause is often moisture ingress rather than electronics — drying and checking the contacts solves the issue without replacement.
We replace cracked Artel glass-ceramic entirely, and the replacement, like the labor, is covered by a 1-year warranty. The surface is removed together with the frame, the seating area is cleared, the heating elements underneath are checked for integrity, and new glass is installed with an even fit around the perimeter without misalignment. The heating element is inspected separately: a crack often starts from overheating of one zone, and if the coil is already deformed or blackened, it is also replaced — otherwise the new glass will quickly suffer the same fate as the old one. Before installation, the technician checks the edge of the seating area for chips: an uneven edge creates point loads, and the surface cracks again. Using a stove with a crack is dangerous — moisture and crumbs get inside and damage the heating elements, so it's not worth delaying the replacement.
We service Artel ovens separately from the cooktop — a faulty door, convection, or timer doesn't require replacing the burners. The convection fan ensures even heating of the oven, and when it stops, the dish burns on one side while the middle stays raw. Door hinges sag over time, so the door doesn't close tightly and heat escapes; then it's removed, the movement is checked, and the hinges are replaced if necessary. The timer and temperature sensor are checked separately: a discrepancy in readings causes unstable operation even though the heating element is fine. The seal around the door is inspected for wear and cracks — up to half the heat escapes through these gaps, and the dish heats unevenly. If the oven doesn't hold temperature well, the cause is often the door seal, not the heating element — replacing the seal restores even heating.
Our Artel electric stove repair follows clear steps — from request and visit to inspection and warranty. Here's what to expect at each stage.
After your request, our technician arrives within 60 minutes anywhere in the city, and before the visit you just need to clear access to the stove and the breaker panel. We handle Artel electric stove repair in Almaty in one clear sequence — from the first call to checking the appliance. The field technician works with Artel electric stoves and knows their circuits — he doesn't need to study the device from scratch on site. Before the visit, clear the approach to the cooktop, remove dishes from the burners, and leave open access to the circuit breaker in the panel. If the stove is connected via a separate line, show which breaker powers it. Also prepare the appliance: unplug it if it sparks or smells burnt. If the stove trips the breaker, don't turn it on again before the visit — this way you keep the chance to pinpoint the cause.
After free diagnostics, the technician names the cause and cost, agrees on the scope of work, and only then starts the repair. Our appliance repair technician checks the heating elements, temperature sensor, triac, and control board — these are the components that most often fail in Artel electric stoves. The repair cost is quoted after free diagnostics, once the cause is identified, not guessed over the phone. Then you decide: approve the work or stop at diagnostics. The price is given before work begins, so you know upfront what you're paying for and can decline if repair isn't worthwhile. We accept Kaspi QR, Kaspi Red, card, cash or bank transfer — whichever is convenient. We never start work without your consent.
We finish the repair by testing the burners and oven, and provide a 1-year warranty on labor and parts. The technician turns on each burner in different modes one by one, checks heating, sensor operation, and the oven, and compares readings with the model's specifications. Only then does he close the panel and clean up. The warranty also covers replaced parts, so if the same component fails again, the call doesn't turn into a new repair from scratch. We handle repeat issues with the same component during the warranty period under warranty — the part has already been checked and replaced. Keep the repair record: it makes it easier to confirm that the issue is a warranty case.
Not every breakdown is fixed at home, and not every stove is built the same. We explain when a technician visit is needed, when it's better to bring the appliance to a service center, and how an electric stove differs from other types.
We fix most burner and panel failures on-site, and we only take the stove to the service center when the body needs a full teardown and major components need replacing. During a home visit, the technician replaces the heating element, thermostat, or switches, and checks the wiring and terminals—that's enough for typical cases where a burner won't heat or heats weakly. Service is needed when the body has to be completely disassembled: replacing glass-ceramic, restoring internal wiring, or repairing the power unit. A city visit takes up to 60 minutes, diagnostics are free, so we decide on the spot—based on the actual inspection, not a phone description. If the stove is built into kitchen cabinetry, a home visit saves time and effort: removing and transporting large appliances isn't always justified, and some faults are visible on the first inspection. We repair Artel electric stoves in Almaty both at home and at the service center—depending on what the inspection shows.
An electric stove heats via heating elements, an induction one uses a magnetic field, and a gas one uses an open flame—so their maintenance differs. In a classic electric stove, the heating element transfers heat directly to the burner, and typical faults involve the element itself, the thermostat, or the power switch. An induction model heats the cookware bottom via a coil rather than the surface, so failures are more often in the electronics, sensors, and power modules rather than the heater. A gas stove requires work with gas fittings and jets, and that needs gas equipment certification. In an induction stove, faults often relate to electronics and sensors, while in a regular electric stove they relate to heaters—so the technician must know electrical systems specifically: induction diagnostics follow the control board, not the coil.
We service Artel electric stoves in Almaty even after the manufacturer's warranty expires, and our technicians work specifically with this brand. Artel appliances come in various series—from simple models with mechanical switches to versions with touch controls and displays—and each has its own failure logic. Our technicians have 4 to 20 years of experience, so we recognize typical faults of this brand by symptom even before disassembly. We provide a 1-year warranty on labor and parts, and you can pay via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies. After the manufacturer's warranty, it's important that the technician knows the design of the specific brand: this reduces troubleshooting time and unnecessary replacements, and thus interventions in working components.
Here's a quick summary to help an Artel electric stove owner decide on repair: from reading the symptom to the final check after the work.
30brands
If your stove isn't an Artel, find your brand in the list of brand pages.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your oven isn't working, first check the outlet, the circuit breaker in the panel, and the selected mode, then assess the symptom: not heating…
3 October 2025 · 12 minutes read
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read












