experience14 yearsVladimir D.
Air conditioner service technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 746 00 26Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Diagnostics are free.
Our own technicians4 to 20 years of experience




Repair prices
Symptoms, likely causes, and cost after diagnostics.
Clogged filter or refrigerant leak
from9 500 ₸
Clogged drain or misaligned drain pan
from3 500 ₸
No power or protection tripped
from10 000 ₸
Loose fan mounts
from8 500 ₸
Codes often come from sensors and the board
from4 500 ₸
Refrigerant leak or faulty heating element
from9 500 ₸
IR receiver failure or dead batteries
from10 000 ₸
Low refrigerant or clogged filter
from5 000 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1–2 hourstime
from 9 500 ₸cost

BeforeAfter5 steps

Five steps from request to performance check.
Leave a request by phone or messenger, describe the symptom.
The technician arrives anywhere in the city within 60 minutes of the request.
The owner needs to provide access to the units, share the error code and service history.
After the cost is approved, the technician performs the repair.
Check the air temperature at the outlet, the absence of unusual sounds, and that the remote works.
The climate control equipment repair department in Almaty has 8 technicians with 4 to 20 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience14 yearsAir conditioner service technician
experience20 yearsSenior air conditioner installer
experience12 yearsAir conditioner repair technician
experience16 yearsIndustrial air conditioner technician
experience4 yearsAir conditioner service technician
experience14 yearsAir conditioner maintenance technician
experience5 yearsAir conditioner installation technician
We reply during working hours
Choose a convenient visit time — the technician will confirm the request and arrive within 60 minutes. 1-year warranty on labor and parts.

Warranty question? Call us
+7 (778) 746 00 267 898 reviews of repairs at TECH SERVICE in total
Гульнара Б.Order No. ZK-2026/675 · 11 May 2026
oursОсновная жалоба — не холодит. Никита М честно сказал, что менять, а что ещё походит. Проверил дома — всё на месте, ничего не забыли.
Ольга М.Order No. TS-6465 · 22 October 2025
oursПозвонил знакомому, он раньше работал в сервисе, посоветовал этих. Сначала думал, что ерунда, но появилось: ошибка. Никита М приехал в тот же день, хотя был конец смены. Приехал вечером, мастер ещё был на месте. Сказать, что доволен — ничего не сказать!!
Сергей Р.Order No. 241734 · 17 July 2025
oursДруг посоветовал, у него похожая история была. Оставил заявку на ремонт мультисплит-системы. Основная жалоба — не холодит один блок. Позвонил, описал проблему, сказали привозить — посмотрят в тот же день. Оплатил картой, чек дали. В списке работ — компрессор. Не пожалел ни разу. Шум пропал, работает мягко.
Андрей П.Order No. 769819 · 11 October 2022
oursОсновная жалоба — не включается. Никита М взялся за то, от чего другие отказались. С тех пор ни разу не подвёл
Ринат Х.Order No. 2022-2770 · 9 May 2022
oursОсновная жалоба — течёт. Дамир М объяснил причину так, что понял даже я. Сделали аккуратно, следов разборки не видно.
Айнур М.Order No. ZK-3781 · 12 December 2021
oursБыло подозрение, что дело в плате, хотелось услышать второе мнение. Повод для визита: не холодит. Шум пропал, работает мягко.
Виктор Ф.Order No. 869833 · 26 November 2020
oursНужен был счёт и чек, у нас техника на балансе организации. Основная жалоба — не холодит. Пользуюсь ежедневно, вопросов нет
Андрей П.Order No. ZK-2020/300 · 1 September 2020
oursПрочитал кучу отзывов, половина — реклама, но тут вроде живые. Уже полгода — ни одного сбоя.
Нурасыл М.Order No. 23551 · 11 August 2019
oursПрочитал кучу отзывов, половина — реклама, но тут вроде живые. Жалоба простая: течёт. Пользуюсь ежедневно, вопросов нет.
Камила А.Order No. TS-1904-662 · 11 May 2019
oursНужен был счёт и чек, у нас техника на балансе организации. Заметил случайно: не включается. Дамир М всё объяснил и не пытался впарить лишнее. В списке работ — компрессор. Включил, проверил, работает
Didn’t find the answer? Message us on WhatsApp.
Ask a questionThe final price depends on the split-system model and how complex the installation is. The technician will give you the exact cost of the air conditioner with installation in Almaty after a free diagnostics and an on-site inspection.
Daikin boards can often be restored: the technician checks the traces, relays, and contacts and replaces burned-out components. If repair isn't possible, the board is replaced with a new one — the decision is made after free diagnostics.
When a Daikin is low on refrigerant, it cools poorly, the pipes get frosty, and the compressor runs nonstop. If it hums in bursts or stays silent, the compressor itself is more often the issue — diagnostics gives the exact answer.
In a sealed Daikin system, refrigerant lasts for years and isn't consumed on its own. It depends on the model and installation quality: if cooling has weakened, the technician will check the system for leaks.
At Tech Service, Daikin repair in Almaty is done by our own technician with at least four years of experience: they arrive at your home within 60 minutes, and diagnostics are free. The warranty on labor and parts is one year.
The technician fixes many inverter Daikin issues on-site: cleaning, refrigerant recharge, board or fan replacement. The unit is taken to the service center only if complex compressor repair is needed.
Tech Service repairs household and semi-industrial Daikin air conditioners in Almaty: a technician arrives at your home within 60 minutes anywhere in the city, or the repair is done at our service center. Diagnostics are free, we provide a 1-year warranty on labor and parts, and the technician gives you the price after diagnostics. We work as a direct contractor, without intermediaries.
Most Daikin service calls start with a simple symptom — not cooling, dripping, or noise. Let's break down what's behind it and what the technician checks first.
When a Daikin stops cooling, we check the chain in order — refrigerant, compressor, heat exchanger, sensors — rather than replacing parts at random. First, the technician checks the pressure in the refrigerant line: a drop points to a leak, not compressor wear. Then the compressor itself is tested — whether it starts and holds operating current. Next is the heat exchanger: dirty fins on the outdoor unit reduce heat transfer, and the unit blows warm air even with healthy hardware. The chain ends with temperature sensors — their readings are compared with actual values to rule out false commands from the board. A common cause is not a breakdown but a clogged outdoor heat exchanger: in Almaty's dusty air it loses heat transfer before the compressor fails, so cleaning sometimes restores cooling without replacing parts. This kind of Daikin AC repair in Almaty starts with free diagnostics, after which the technician names the cause and the scope of work.
Indoor unit leaks are almost always related to the drainage system — a clogged condensate drain, a shifted or clogged drain pan. Condensate flows into the pan and drains by gravity; when the drain gets clogged with dust and slime, water overflows the pan and leaks out of the casing. The second scenario is a drain pipe shifted during installation or by vibration: the flow misses the channel. The third is a dirty pan where debris builds up and water doesn't reach the drain. If moisture appears only in high humidity and during long operation, the cause is more often a clogged drain than the unit itself — cleaning the drain solves the problem without disassembling the heat exchanger. In my view, checking the drain should come before any work on the heat exchanger: it's the most common and cheapest cause of leaks.
Noise and vibration in Daikin units usually come from the fan and bearings, while "won't turn on" points to the control board or sensors; we start by checking electrical circuits. A worn fan bearing causes humming and metallic squealing, and an unbalanced fan blade causes vibration that transfers to the casing. If the unit doesn't respond to the remote, the technician tests the control board and checks temperature sensors: an oxidized contact or a failed sensor blocks startup. After cleaning, the unit sometimes cools worse not because of a breakdown but due to a poorly dried heat exchanger or reset settings — worth checking before calling a technician. In our practice, noise on Daikin units often turns out to be not a component failure but a loose mounting of the outdoor unit.
A code on the Daikin remote is a hint, not a verdict. Let's break down what it means, which components of the brand fail most often, and how technicians tell one fault from another.
The Daikin control board generates an error code when one of the components fails, and it immediately narrows things down — sensor, compressor, inverter module, or communication between units. In our practice, decoding the code on the display saves the first stage of diagnostics: the technician arrives with a set of likely causes instead of checking the entire system. The board reads temperature sensor signals, circuit pressure, and compressor current, compares them with the norm, and displays a combination of letters and numbers on the indoor unit or remote. The same code sometimes appears due to a minor issue — a loose contact or a power glitch — so the decoding is always confirmed by measurement, not by replacing a part based on one combination on the screen.
| Daikin component | Typical symptom | What we check | Solution |
|---|---|---|---|
| Compressor | not cooling, humming | wear, starting current | repair or replace |
| Control board | error code, won't turn on | electrical circuits, module | repair module or replace |
| Temperature sensors | mode failures, error | signal to board | replace sensor |
| Four-way valve | won't switch between heat and cool | valve travel | repair component |
| Drainage system | water dripping | clogged drain | clean out |
We distinguish low refrigerant from compressor wear by measuring pressure and current: a leak lowers pressure in the circuit, while a worn compressor fails to deliver the required capacity at normal pressure. The technician connects a manifold gauge set to the service ports and observes how the refrigerant line behaves during cooling operation: consistently low pressure indicates a leak, while compressor current spikes at normal pressure point to mechanical wear. We also check superheat at the evaporator inlet and discharge temperature—these two measurements confirm the diagnosis more accurately than a single gauge. Recharging without finding the leak only restores cooling briefly: if refrigerant is escaping, we first locate and fix the leak, otherwise the problem returns within a few weeks.
Below is how Daikin air conditioner repair in Almaty works from request to warranty, with service facts: technician visit, free diagnostics, approval of work, and warranty on the result.
A Tech Service technician arrives at your home within 60 minutes anywhere in the city, or if it's more convenient, we can pick up the unit for service at our workshop. This visit covers both the typical case when the unit isn't cooling and the situation when the indoor unit needs to be disassembled on site. At the address, the technician first listens to what's happening with the unit and compares it with the code or symptom the owner reported when requesting service—this makes diagnostics faster than starting from scratch. Inverter and semi-industrial Daikin models are inspected with their electronics in mind, so it's worth providing the exact model of the outdoor unit when you call. At your home, we check filters, drainage, and compressor operation; at the workshop, we test the control board and sensors. If the unit is old and the part is rare, the technician immediately explains what can be repaired and what requires component replacement.
Diagnostics are free with us, and the technician quotes the price after diagnostics—when it's clear which component and what work are needed. This order removes the owner's main fear—"they'll quote one sum but charge another": the scope of work is discussed before any intervention, not after. During the inspection, the technician shows exactly what has failed—a clogged drain, a worn fan, or a refrigerant leak—and explains what actions the work will include. If the fault turns out to be in the inverter electronics, the inspection is still free, and the owner makes a decision with the full picture. The price depends on the component and scope of work, so it's not given over the phone but fixed after the inspection. This approach lets you compare options calmly, without pressure on site.
We provide a 1-year warranty on labor and parts and you can pay via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies; we work as a direct contractor, without intermediaries. Direct contractor means the same service whose technician arrived is responsible for the result — you don't have to forward a claim between subcontractors. Our technicians have been working with Daikin equipment for 4 to 20 years, so for warranty claims the replaced unit is checked against the original request. We accept Kaspi QR, Kaspi Red, card, cash or transfer — the owner chooses the method, regardless of the type of work. The warranty covers both labor and installed parts. If the unit misbehaves again after the repair, the 1-year warranty on labor and parts applies.
Inverter and semi-industrial Daikin systems are more complex than household models, and their maintenance approach is different. Let's look at exactly what the difference is and when it's more cost-effective to repair the unit.
In an inverter Daikin, cooling is controlled by an electronic inverter module, so diagnostics start with the board and electrical circuits, not just the compressor. A conventional split turns on and off by thermostat command, while an inverter model smoothly changes compressor speed through the power module, and a failure of this unit produces the same symptoms as low refrigerant — weak cooling or a complete stop. Our technicians first test the control board, check the power switches, temperature and pressure sensors, and only then move on to the refrigeration circuit. The inverter module is sensitive to voltage fluctuations, so if failures recur, it's worth checking the power supply — otherwise the new unit risks failing just like the old one.
Semi-industrial cassette and ducted Daikin systems are more complex in design and wiring, so their repair often requires access to the ceiling area and checking multiple units. A cassette model hides the main unit behind a decorative panel in the ceiling, while a ducted model distributes air through a duct system, and both require separate lifting. Daikin multi-split systems combine one outdoor unit with several indoor units, so a malfunction of the outdoor unit affects all rooms at once. In ducted systems, a breakdown of one element sometimes shows up in another room — it's important to trace the entire route, not just the unit that's complained about. Work on such equipment is carried out with an understanding of the specific wiring scheme, not according to a general template for household splits.
An inverter Daikin is more often repairable than it seems: the decision depends on the condition of the compressor and board, not on the age of the unit. When the electronics are working and only the compressor is worn, replacing the unit restores operating speed and smooth regulation. If the inverter module has burned out along with the compressor, it's worth comparing the scope of work with buying a new unit — the technician will advise after free diagnostics. We provide a 1-year warranty on labor and parts, so after the repair you stay in touch with the contractor instead of looking for a new one if the problem recurs. In our experience, inverter models last longer with stable power — it's worth installing a voltage monitoring relay. Before replacing a unit, the technician once again compares sensor readings with the specification values to avoid replacing a working part due to a fault in the power circuit.
When it's worth repairing a Daikin and when it's cheaper to replace the unit, how to properly charge refrigerant, and why preventive maintenance extends service life — we break it down by the criteria a technician encounters on a service call.
The key factor is the condition of the compressor and control board: if only one component is worn out, restoration makes sense, but if several key components are worn out at once, replacement may be more reasonable. The compressor is the most expensive and heavily loaded element of a split system, and its replacement is the most extensive job in restoring the unit. The control board fails differently: a voltage surge burns out the power elements, but the mechanical resource remains. Therefore, the technician first checks both components and only then suggests a plan. The service life of a Daikin depends not so much on age as on conditions: dusty air and voltage fluctuations accelerate wear of components, so a unit with a clean heat exchanger often lasts longer than a neglected "newer" unit.
Charging a Daikin with refrigerant begins with finding the leak and vacuuming the circuit — topping up "by eye" without this does not give a stable result. We pump out the remaining refrigerant, vacuum the refrigerant line, and only then fill the required amount by weight. If vacuuming is skipped, moisture and air remain in the circuit, and the compressor works overloaded, while the refrigerant itself loses its properties. We look for the leak at connections, flare fittings, and in the heat exchanger — most often it leaks exactly there, at the joints of copper tubes. If refrigerant escapes regularly, the problem is in the connection or heat exchanger, not in the amount of charge — otherwise you will have to top up again. Therefore, before charging, we eliminate the cause of the leak itself, not mask it: after brazing and pressure testing, the circuit holds pressure, and the volume remains stable all season.
We perform Daikin maintenance as contamination occurs — in the dusty air of the southern capital, the heat exchanger and filters clog faster than average. Residents of the metropolis with dense buildings and summer dust should check the filters every two to three weeks themselves, and entrust the heat exchanger and drainage system to a technician during seasonal maintenance. In our service, cleaning the heat exchanger and flushing the drainage are done together with diagnostics. Regular cleaning of the heat exchanger and drainage prevents repeat breakdowns — a clogged component loads the compressor and shortens its life. A clogged drainage adds indoor unit leaks to this, and dust on the heat exchanger fins reduces heat transfer and forces the system to work at its limit, so it is better not to postpone maintenance until the first dripping.
The observations collected on Daikin boil down to a short set of rules — they help equipment owners understand in advance where the check will begin and when it's time to call a technician.
80brands
We work with air conditioners and split systems of every brand sold in Kazakhstan — from Almacom, Gree and Midea to LG, Samsung, Chigo and rare imported makes. Can’t find yours in the list? Call anyway — a technician will come and take a look.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
Air conditioner errors are codes on the display or flashing indicators that show which component has failed.
5 March 2026 · 12 minutes read
If your air conditioner is leaking, first turn it off and cut the power, place a container under the drip, and move any wiring away from the water.
19 October 2025 · 12 minutes read
Gas boiler errors are codes on the display or a flashing indicator that point to a specific component: ignition, pressure, draft, sensor, or control board.
10 February 2026 · 11 minutes read












