Екатерина К.Order No. ZK-2026-344 · 8 April 2026
oursПереезжали в новую квартиру, техника после перевозки захандрила. Проблема ровно одна: слетела прошивка. Функционирует, тьфу-тьфу)
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 096 59 61Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics.
Our own technicians4 to 20 years of experience




Repair prices
Below are frequent symptoms of Skyworth TV faults and their likely causes. The technician makes an exact diagnosis after free diagnostics.
power supply, control board, button
from8 000 ₸
backlight, T-CON, ribbon cable
from9 500 ₸
matrix, ribbon cable, board
from9 500 ₸
module, firmware, board
from6 000 ₸
LEDs, driver
from9 000 ₸
backlight driver, ribbon cable contacts
from9 000 ₸
speakers, audio board, firmware
from7 000 ₸
power supply, overheating, board
from8 000 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1 visittime
from 9 000 ₸cost

BeforeAfter5 steps

From request to final check — five steps, including free diagnostics.
Agree on a convenient visit time and address so the technician can plan the route.
Tell us the Skyworth model and symptom by phone so the technician brings the right tools and common parts.
The technician checks the power supply, backlight and board, and identifies the faulty unit.
You approve the list of work and parts, then the technician starts the repair.
The technician demonstrates the result and explains how to use the repaired unit.
We reply during working hours
Leave a request — a technician will arrive within 60 minutes anywhere in the city and determine on site whether the TV can be repaired. You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies.

Warranty question? Call us
+7 (778) 096 59 616 127 reviews of repairs at TECH SERVICE in total
Екатерина К.Order No. ZK-2026-344 · 8 April 2026
oursПереезжали в новую квартиру, техника после перевозки захандрила. Проблема ровно одна: слетела прошивка. Функционирует, тьфу-тьфу)
Валерия А.Order No. AST-2512-833 · 23 July 2025
oursС чем обратился: полосы. Сергей Архипов показал старую деталь, всё прозрачно. После ремонта — как новое)
Салтанат К.Order No. ZK-2024-289 · 18 August 2024
oursАстанада тұрамын, қаланың арғы жағына бару ыңғайсыз болды. Мастер бірден қарап шықты
Василий Е.Order No. 2408-3151 · 13 March 2024
oursДруг из Сарыарки посоветовал это место. Сначала списал на мороз, но нет: зависает. Настройки не слетели, всё как было.
Эдуард К.Order No. 16276 · 17 May 2023
oursЗаявку оставил через сайт вечером, утром перезвонили. Приехал с дачи, а тут — нет картинки. Все функции проверил — работают.
Ангелина Я.Order No. ZK-2019-505 · 22 April 2019
oursЖиву в Есиле, искал сервис, чтобы не тащиться через весь город. Открыл — и сразу понял: не включается. Сказали, что позвонят, и действительно позвонили. Сравнивал — здесь дешевле. Нужна была новая деталь: тюнер. Позвонили не сразу, но потом извинились. Все функции проверил — работают.
Ярослав С.Order No. AS-5835 · 4 October 2018
oursОфис на Кабанбай батыра, технику туда и повёз. Первое, что заметил: не включаеться. Дамир М всё сделал при мне, за пятнадцать минут. Прошивка та же, ничего не сбросили.
Вадим Г.Order No. 1806-1262 · 11 August 2018
oursДруг из Сарыарки посоветовал это место. Было ощущение, что попал на замену целиком. Жалоба одна: слетела прошивка. Дамир М показал старую деталь, всё прозрачно. Приехал без записи, но свободный мастер нашёлся. По факту меняли: плата. По деньгам вышло ровно, без сюрпризов. Вернусь при необходимости. Работает, как будто и не ломалось.
Василий Е.Order No. TSA-66536 · 4 October 2017
oursПозвонил в четыре места, тут ответили по-человечески. Вчера работало, сегодня уже слетела прошивка. Перезвонили на следующий день, уточнили детали. Обошлось заменой: плата. Заплатил бы и больше, если честно. Скажу знакомым. Сейчас пашет без нареканий
Ярослав С.Order No. TSA-23731 · 14 February 2017
oursВыбирал между официальным и этим, выбрал этот. Больше всего мешало: слетела прошивка. Сейчас пашет без нареканий.
experience10 yearsTV screen replacement technician
experience7 yearsLead electronics repair technician
experience10 yearsMobile PC repair technician
experience10 yearsLaptop repair and assessment technician
experience15 yearsDigital device repair technician
Didn’t find the answer? Message us on WhatsApp.
Ask a questionPeople look for Skyworth TV technicians at services that work specifically with this brand. Our service is the direct provider: our own specialist comes to your home or takes the TV in for repair at the service center.
A power surge most often damages the power supply, less often the motherboard. Such a Skyworth is repaired by replacing or restoring the board, and free diagnostics at home will show exactly what was damaged.
Yes, in most models, replacing LEDs and backlight strips is done at home. If service conditions are needed to disassemble the panel, the technician will let you know after diagnostics — it depends on the model.
Most often the power supply or the backlight circuit is to blame: when the LEDs are failing, the TV starts up and goes into protection. Free diagnostics at home will show the exact cause, it depends on the model.
Yes, a faulty motherboard is repaired at home or at the service center, and replaced if necessary. This applies when the Skyworth doesn't see Wi-Fi, won't start Smart TV, or freezes on the logo.
Spots and stripes indicate problems with the backlight or the matrix, and over time the defect usually grows. The sooner diagnostics are done, the higher the chance of getting by with a backlight replacement rather than a screen replacement.

Author: Oraza B.,TV screen replacement technician
Published
Updated
Tech Service repairs Skyworth TVs in Astana: our technician comes to your home or takes the equipment to the service center. Diagnostics are free, arrival within 60 minutes anywhere in the city, 1-year warranty on labor and parts. Technicians with 4 to 20 years of experience identify the cause by symptom and indicator.
Most often, a Skyworth stays silent due to a power supply issue, triggered protection, or a startup circuit. The LED on the front panel hints at which unit to check before you even open the case. The blink pattern narrows down the checks.
A blinking red LED on a Skyworth is the control board signaling a fault in the power circuit or triggered protection, not a firmware error. The board polls the units at startup and, if it detects a voltage or current deviation, doesn't send the start command—instead, it gives an intermittent standby signal. The blink rhythm varies by series: some models count long pauses, others short flashes between them. Skyworth TV technicians in Astana start right here: they read the number of flashes and pauses, compare with the power supply behavior, and only then open the case. The number of flashes and pauses differ across series, so we first read the rhythm and then check the power unit—that way we find the cause faster than by opening the TV at random. If you need Skyworth TV repair in Astana, the technician reads the blink rhythm and checks the power unit on site.
If the LED is on but there's no picture or sound, we first check the power supply and startup circuit—they most often fail to send the start command. Standby mode is still alive: it powers the lamp and command receiver, but the main voltage to the backlight and panel isn't supplied. Around the city, the technician arrives within 60 minutes, diagnostics are free—on site, it's clear whether it's the unit or a consequence of a voltage spike. The TV behaves similarly after a thunderstorm and when it turns off after a few minutes of operation: protection cuts power as soon as the load exceeds the limit. A lit LED is a good sign: the standby circuit is alive, so the check narrows to a few units rather than the whole circuit. Such cases rarely end with a matrix replacement—more often it's the power supply and startup.
| Symptom | Initial check | Unit |
|---|---|---|
| Won't turn on, indicator lit | startup circuit and power | power board |
| Red indicator blinking | blink rhythm and protection | power board |
| Sound but no picture | LED strips and driver | backlight |
| Vertical stripes | ribbon cable contacts | matrix, ribbon cables |
| Turns off after a few minutes | heating and protection | power board |
The same symptom—a dark screen with working sound—leads to different units. Let's see how a technician distinguishes backlight from matrix and what that means for repair.
If there's sound but the screen is dark, we check the backlight and its driver—with a working matrix, the picture is formed but remains invisible without LED strip light. In Skyworth TVs, the backlight consists of several LED strips, and failure of one diode breaks the entire strip's circuit, so the whole screen goes dark, not just a section. The driver stabilizes current for these strips, and its failure gives the same symptom—the panel doesn't light up even though the signal reaches the matrix. The technician opens the back cover and tests the strips and driver output to determine what exactly failed: the LEDs themselves or their power circuit. You can check the lighting with a flashlight: if you see a dim image at an angle, the matrix is intact and the problem is in the LEDs or driver.
Vertical lines and spots usually point to the panel or ribbon cables rather than the backlight — these are different components and require a different repair sequence. The panel is the pixel matrix itself, ribbon cables connect it to the T-CON board and the main board, and the connectors on them transmit the signal line by line. Dead pixels look like individual dots, and such defects usually mean poor contact or damaged traces on the ribbon cable. When these artifacts appear, the technician first checks how the ribbon cables sit in the connectors and whether they are intact, and only then draws conclusions about the panel. Defects that change when you lightly press on the frame often indicate a ribbon cable contact issue rather than a failed panel — this is checked before recommending replacement.
Not every fault is reasonable to fix on-site: some operations require stationary disassembly of the panel. Let's break down what the technician does at your home and what gets taken to the workshop.
At your home, we handle power board and backlight repairs for Skyworth when the job doesn't require stationary panel disassembly. The technician checks the startup circuit and block protection, tests the LED strips and driver contacts, and replaces failed components right at your place. This format covers typical cases when the TV won't turn on or the screen goes dark while sound continues. Experience shows that most such faults are related to power or backlight, so this equipment can often be restored without transportation. Our specialists have been working with this brand for 4 to 20 years and know the module design across different screen sizes. A 60-minute arrival across the city means the specialist gets there fast — but the scope of work is still agreed after free diagnostics, not based on a phone description.
We replace the panel and perform complex panel work at the service center — such operations require stationary conditions and careful screen disassembly. Removing the panel on-site is inconvenient and risky: the slightest misalignment of layers causes cracks and light bleed, so we move panels and tightly seated ribbon cables to the workshop. Equipment that needs full case disassembly and checking multiple components in sequence also goes there. If the fault involves the panel, weigh repair against buying a new TV: the panel is the most expensive component, and the technician will tell you when replacement isn't worth it. The final decision is made after free diagnostics, not over the phone. This approach saves the owner money when panel repair costs as much as a new TV.
| Component or job | Where we do it | What we check |
|---|---|---|
| Power board | on-site | startup circuit, protection |
| Backlight and driver | on-site | LED strips, contacts |
| Panel | at service center | panel, ribbon cables |
| Ribbon cables and connectors | on-site or at service center | contact, seating |
| Diagnostics | on-site | cause based on symptoms |
Skyworth TVs have their own recurring faults — let's look at what owners complain about and why technicians focus on specific components during diagnostics rather than general schemes.
Most often, Skyworth owners come to us with power board and backlight issues—these are the two components responsible for most 'won't turn on' and 'no picture' symptoms. The power board fails after voltage spikes in the mains: capacitors swell, power switches short out, and the TV either goes into protection mode or shows no signs of life at all. Backlight is the second most common cause: individual LEDs in the strips burn out, the screen dims partially or completely, while sound remains. Less common are faults in the main board and Wi-Fi module, but they require separate testing and a different set of tools. Our technicians with 4 to 20 years of experience trace the typical chains in these TVs faster—from the indicator to the specific board, without unnecessary disassembly of neighboring components.
Skyworth has its own board layout and indicator behavior, so universal 'Samsung-style' schemes don't work—the technician starts from the symptom of the unit, not from a generic template. In these TVs, the power board is often combined with the backlight inverter in a single unit, and the ribbon cable connectors are positioned differently than in Samsung or LG: incorrect disassembly order leads to cable damage. The Skyworth indicator blinks in series, and the number of flashes points to a specific component—other manufacturers use different logic. Diagnostics go from symptom and indicator code to the board, not the other way around. The same sign across different brands leads to different components, and this changes the testing order: first check power, then the backlight chain, and only then the main board.
Diagnostics, warranty, and payment procedure—what the owner finds out before work begins. We explain how this process works and why the cost of Skyworth restoration isn't quoted upfront.
Diagnostics are free with us, and the technician quotes the price after them—when it's clear which Skyworth component has failed. First, the engineer checks the power supply, backlight circuits, and board condition, determines the cause and scope of work, and only then states the amount. No one can give an exact price before diagnostics: the same picture on screen—a blinking indicator or lost image—can point to either a simple power supply or a matrix that's expensive to repair. This approach protects against 'surprises': you first learn the cause and scope of work, and then decide whether to restore or not. Approval before soldering and parts replacement prevents the 'we'll fix it, then bill you' situation. You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies—you choose the convenient one.
We provide a 1-year warranty on labor and parts—this applies to both power board replacement and Skyworth backlight restoration. The condition covers the entire scope of work performed: both the intervention itself and the installed part. For the owner, this means: if the fault recurs, you go back to the same provider, not to a new technician starting from scratch. A warranty on parts separate from labor matters for repeat visits: if the part fails, the one who installed it is responsible. During the visit, the technician explains the scope of warranty obligations so there's no ambiguity. If the breakdown recurs within the warranty period, we return to the same component and fix the cause, not just the symptom. This approach is convenient for the owner: no need to look for a new provider and describe the repair history again.
Whether to repair or replace depends on the component: the power board and backlight are usually repairable, while replacing the panel may not be worth it. The Skyworth panel is the most expensive part of the TV, and replacing it can sometimes cost as much as buying a new set; in such cases, it's more honest to say so directly than to take on the job. The power board, backlight unit, and inverter are components that can be restored individually without replacing the entire screen. If the TV is still under the store's warranty, check its terms first — sometimes going to the seller is more advantageous than intervening yourself. Intervention by a third-party technician may void the seller's warranty, so check this before calling. Also ask the seller whether the warranty remains valid if the power board is replaced — this is the most common case that leads to disputes over rights.
Request, symptom clarification, technician visit, and on-site diagnostics — four steps that fit into a single visit. Some checks the owner can do before calling to avoid making the problem worse and wasting time.
You submit a request, we clarify the symptom and indicator behavior, a specialist arrives within 60 minutes anywhere in the city, performs free diagnostics on site, and agrees on the work. The dispatcher asks for the model, age of the device, and exactly how the fault manifests: won't turn on at all, turns off after a short while, or blinks red in a specific rhythm. From these details, our employee understands in advance which Skyworth component will need work — power supply, backlight, or main board. Diagnostics are free; the cost of work and parts is quoted after inspection, before any repair begins. We provide a 1-year warranty on labor and parts. Our experience ranges from 4 to 20 years on TVs of various brands, and with Skyworth we already know the typical combinations of symptoms. The more accurately the symptom and indicator blink rhythm are described, the faster the technician understands which component will need work.
Understanding the symptoms and repair format helps you make the right decision faster and avoid paying for unnecessary work. Below is a short summary of the entire breakdown.
63brands
We work with TVs of every brand sold in Kazakhstan — from Samsung, LG and Sony to Artel, Yasin, Kivi, Hyundai, Thomson and rare makes. Can’t find yours? Call anyway — a technician will come and take a look.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your TV won't turn on, first check the outlet, power cable, and the button on the TV itself—not the remote.
21 November 2025 · 12 minutes read
If your laptop screen is broken, turn the device off first, don't press on the display, and check the picture through an external monitor.
12 March 2026 · 11 minutes read
If your phone won't charge, start by checking the adapter, cable, and port, then the charging settings.
16 February 2026 · 12 minutes read
If your laptop freezes, the first thing to do is restart it and check Task Manager to see what's loading the CPU and memory.
25 January 2026 · 12 minutes read
If your phone falls in water, take it out right away, turn it off, and don't charge it.
19 January 2026 · 12 minutes read
If your phone camera isn't working, first check app permissions, clear the cache, and restart your phone — this fixes some software glitches.
24 December 2025 · 13 minutes read












