Open until 19:00+7 (778) 096 59 61Call a technician
Tech Service technician next to a tv

Haier TV Repair in Astana

A technician arrives within 60 minutes anywhere in the city. Diagnostics are free.

  • 1-year warranty on labor and parts
  • Arrival within 60 minutes anywhere in the city
  • Free diagnostics

Our own technicians4 to 20 years of experience

Oraza B.Adil S.Alibek I.Vladislav M.

Repair prices

  • Diagnostics0 ₸
  • IR receiver repairfrom3 500 ₸
  • TV dust cleaningfrom4 500 ₸
  • Smart TV setupfrom5 500 ₸
  • TV firmware updatefrom6 000 ₸
All prices
ours5,06 127 reviews
order database
Common faultsCommon faultsTECH SERVICE02

Common Haier TV faults in Astana

Below are typical symptoms and likely causes. The technician will determine the exact cause after diagnostics.

PricesPricesTECH SERVICE03

How much Haier TV repair costs in Astana

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

IR receiver repairparts not included

1–3 hours

from3 500 ₸

TV dust cleaninglabour only

1–2 hours

from4 500 ₸

Smart TV setuplabour only

1–2 hours

from5 500 ₸

TV firmware updatelabour only

1–2 hours

from6 000 ₸

HDMI port repairparts not included

1–2 hours

from6 000 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Haier TV repair in Astana

Motherboard does not boot

1 visittime

from 10 000 ₸cost

Problem
The Haier TV turned on, the indicator light was on, but there was no picture, menu, or sound, and it did not respond to the remote.
What we did
The technician came to the home, removed the back cover, replaced the main board due to a failed flash memory chip, connected the ribbon cable and connectors, updated the settings, and checked the inputs.
Result
The TV boots, picture, menu, and sound work, the remote responds; the technician checked the inputs.
I want the same
Artel TV: motherboard won't boot — after repairBeforeAfter
01 / 05
All repairs
TECH SERVICE mobile technician with a tool case

How Haier TV repair works at your home in Astana

From request to checking the work — five steps.

  1. Requeston the day of request

    Describe the symptom and your Haier TV model so the technician can prepare.

  2. Technician visitwithin 60 minutes

    The technician will arrive anywhere in the city within 60 minutes after your request.

  3. Diagnosticsfree

    The technician will inspect the TV on site and agree on further steps with you.

  4. Repairby appointment

    The technician will offer repair at home or in the workshop; clarify details and timing in advance.

  5. Checkafter repair

    Turn on the TV and check the picture, sound, and remote control.

Leave a request

We reply during working hours

Book Haier TV repair in Astana

Call or message us on WhatsApp. A technician will arrive within 60 minutes anywhere in the city, diagnostics are free. 1-year warranty on labor and parts.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 096 59 61
Customer reviewsReviewsTECH SERVICE05

Reviews of Haier TV repair in Astana

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Ангелина Я.Order No. AS-7818 · 26 April 2026

ours

Знакомый мастер раньше здесь работал, дал номер. Приехал с дачи, а тут — слетела прошивка. Полёт нормальный.

Repair: tv repair in

Екатерина К.Order No. ZK-2026-344 · 8 April 2026

ours

Переезжали в новую квартиру, техника после перевозки захандрила. Проблема ровно одна: слетела прошивка. Функционирует, тьфу-тьфу)

Repair: tv repair in

Василий Е.Order No. 2408-3151 · 13 March 2024

ours

Друг из Сарыарки посоветовал это место. Сначала списал на мороз, но нет: зависает. Настройки не слетели, всё как было.

Repair: tv repair in

Эдуард К.Order No. 16276 · 17 May 2023

ours

Заявку оставил через сайт вечером, утром перезвонили. Приехал с дачи, а тут — нет картинки. Все функции проверил — работают.

Repair: tv repair in

Эвелина Ш.Order No. 2301-7978 · 1 February 2023

ours

Основная жалоба — нет картинки. Сергей Архипов подобрал аналог дешевле, не навязывал оригинал. В techservice на левом берегу и обратился. Прошивка та же, ничего не сбросили

Repair: tv repair in

Пётр Ч.Order No. ZK-2018-324 · 1 April 2018

ours

Дамир М объяснял без умных слов, за это спасибо. Обошлось заменой: блок питания. Полёт нормальный

Repair: tv repair in

Анастасия Т.Order No. AS-6963 · 3 February 2018

ours

Знакомый мастер раньше здесь работал, дал номер. Было ощущение, что попал на замену целиком. Больше всего мешало: нет картинки. По факту меняли: подсветка. Всё оформили по договору, с печатью и подписью. По деньгам вышло ровно, без сюрпризов. Рекомендую без оговорок. Сделали так, что и не придерёшься.

Repair: tv repair in

Надежда Ц.Order No. ZK-2017-812 · 10 November 2017

ours

Сергей Архипов отсоветовал дорогой ремонт, предложил простой. Замена: плата. Ни шума, ни запаха, всё штатно.

Repair: tv repair in

Любовь Ю.Order No. AS-8017 · 29 July 2017

ours

Офис на Кабанбай батыра, технику туда и повёз. Утром столкнулся с этим: не включается. Выбирал по карте, Tech-service был ближе всех. Вернули — проверил, всё ок.

Repair: tv repair in

Ярослав С.Order No. TSA-23731 · 14 February 2017

ours

Выбирал между официальным и этим, выбрал этот. Больше всего мешало: слетела прошивка. Сейчас пашет без нареканий.

Repair: tv repair in
See all reviews

Our technicians in Astana

01 / 05
Oraza B., TV screen replacement technicianexperience10 years

Oraza B.

TV screen replacement technician

Adil S., lead electronics repair technicianexperience7 years

Adil S.

Lead electronics repair technician

Alibek I., mobile PC repair technicianexperience10 years

Alibek I.

Mobile PC repair technician

Vladislav M., laptop repair and assessment technicianexperience10 years

Vladislav M.

Laptop repair and assessment technician

Sergey K., digital device repair technicianexperience15 years

Sergey K.

Digital device repair technician

Questions and answersQuestionsTECH SERVICE06

Questions about Haier TV repair in Astana

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Can a Haier TV's backlight be repaired, or does the panel need to be replaced?

In most cases, the backlight is replaced separately without touching the panel. The decision depends on the model and the condition of the screen — the technician will tell you after diagnostics.

How do I book a Haier TV repair technician to my home in Astana?

Leave a request and a technician will come to you anywhere in the city. They'll run free diagnostics, agree on the price, and do the repair on site.

What should I do if my Haier TV turns itself off after a few minutes?

Check that the ventilation openings aren't blocked and the case isn't overheating. If the shutdowns continue, it's likely a power supply or backlight fault — you'll need a technician's diagnostics.

Why does my Haier TV have sound but no picture?

Most often it's the backlight, less often the power supply or control board. A technician will check on site and pinpoint the exact cause.

Can a Haier with a broken screen be fixed?

If the panel is cracked, repair usually isn't worth it — buying a new TV is cheaper. If only the protective glass or case is damaged, repair is possible, depending on the model.

Can a Haier be repaired if it doesn't respond to the remote or buttons?

Yes, this is often caused by the power supply or control board rather than the remote itself. A technician will check the power and board on site and determine what exactly has failed.

Repair guideArticleTECH SERVICE07

Haier TV repair in Astana by Tech Service technicians

Oraza B., TV screen replacement technician

Author: Oraza B.,TV screen replacement technician

Published
Updated

Tech Service repairs Haier TVs in Astana: a technician comes to your home within 60 minutes anywhere in the city or takes the device to the service center. Diagnostics are free, we agree on the price after diagnostics, and we provide a 1-year warranty on labor and parts. Technicians have 4 to 20 years of experience.

Why a Haier TV won't turn on and what the indicators mean

A Haier TV most often stays silent due to power supply, backlight, or control board issues. Let's break down what each symptom means and when you can't do without a technician.

Flashing red indicator and a TV that won't turn on

A flashing red indicator on a Haier almost always signals a fault in the power circuit or control board, not a dead remote. Standby voltage is present, but the power supply doesn't reach operating mode: dried-out capacitors in secondary circuits, a blown PWM controller, or a short in the backlight line prevent the main converter from starting. On some models, the flashing duplicates inverter protection, and then the screen stays black even with a working panel. The IR receiver and power button are checked first—they're cheaper than any board, and a false diagnosis on them costs the most. The number of flashes and rhythm vary across Haier models, so a diagnosis isn't made from "flashing" alone—the technician first checks the power supply and backlight circuits. If your own check doesn't help, a technician performs Haier TV repair in Astana with on-site diagnostics.

Haier TV turns off by itself after a few minutes

Spontaneous shutdown of a Haier after 10–15 minutes of operation is usually related to power supply problems or overheating, not a software glitch. The power supply heats up under load, and a degraded component—a swollen capacitor, overheated transformer, or blown diode—triggers protection. The second scenario involves LED backlighting: when part of the strips degrade, the driver raises current to the limit, thermal protection kicks in, and the picture goes out along with the sound. Overheating of heatsinks on the motherboard gives a similar picture, but shutdown in this case is delayed and often accompanied by artifacts on the screen. If the TV turns on again after cooling and lasts the same minutes, it's a recurring thermal scenario, and it's important to describe it to the technician before the visit.

No picture but sound works—where to look for the cause

No picture with working sound on a Haier most often points to the backlight or T-CON board, not the entire panel. Sound comes from the main board, so power and signal processing are alive, and the fault is localized in the picture output path. LED strips lose brightness over time and burn out in sections, the driver goes into protection—the screen stays dark with no backlight at all. The T-CON board handles scanning and signal transmission to the panel: oxidized or loose ribbon cables cause stripes, ripples, or a completely black screen. Shining a flashlight on the screen in a dark room is a simple way to tell if the panel is alive: if a faint image is visible, the issue is in the LED strips.

Stripes, spots, and lost picture—what exactly broke

Stripes and dark spots on a Haier come from the panel, T-CON board, ribbon cables, and backlight. Let's break down how to narrow down the causes by the external symptom before the technician arrives.

Vertical stripes and dark spots on the Haier screen

Vertical stripes on a Haier most often indicate a fault in the panel, T-CON board, or ribbon cables, not the power supply. The panel receives signal from the board via flexible connectors—thin conductors are the first to suffer from overheating and oxidation. A dark spot in the corner or center often means a local defect in the LED strips or damage to the panel layers themselves. The IR receiver and main board don't affect the picture, so lines with working sound almost always lead to the image circuits. If the defect changes when you lightly press on the frame or disappears after warming up, the circle narrows to contact connections, and it's worth telling the technician in advance. This sign saves time: a faulty connector is checked first, and the panel is left for last.

How to tell a backlight failure from a panel or power supply issue

During our free diagnostics, we check the power supply and LED strip circuits to separate burned-out LEDs from a faulty panel and avoid replacing unnecessary parts. Our technician observes the screen's behavior with the lights off: a faint glow around the edges without a picture indicates the drivers are working and some strips are still alive. If the backlight is even but there's no image, the cause points to the T-CON or the panel itself. Voltage drops on the power board produce a different symptom: the screen goes completely dark or the TV enters protection mode. Replacing strips and replacing the panel are jobs of different scale, so pinpointing the cause on site saves the owner both time and stress. An experienced technician distinguishes these scenarios in a single power-on, without opening the case.

Table of Haier symptoms and likely causes

Haier symptomLikely causeWhat the technician checks
No image, sound worksLED backlight or T-CONbacklight circuits, T-CON board
Vertical stripesmatrix, T-CON, ribbon cablesribbon cable contacts, T-CON
Won't turn on, indicator is onpower supply, main boardpower supply, control board
Red indicator blinkspower circuit or boardspower supply, backlight circuits
Turns off by itself after a few minutespower supply, overheatingpower supply, component heating
Doesn't respond to remoteIR receiver, main boardIR receiver, control board

How Haier TV repair with a technician visit works

Haier TV repair in Astana can be done at home or at the service center. Here's how a technician visit works and what happens to your TV from request to warranty.

Calling a technician to your home and on-site diagnostics

We come to your home anywhere in the city within 60 minutes, so you don't have to take your Haier TV to the service center and risk damaging the matrix on the way. The technician arrives with their own tools, inspects the panel, and checks the power supply and backlight right in your room—no disassembly is needed for initial diagnostics on site. We bring test boards and cables to quickly confirm or rule out a power supply issue and avoid making you hunt for parts again. We also check the ribbon cables and connectors separately: on Haier TVs, oxidized contacts after power surges cause the same symptoms as a backlight failure. A large screen is easy to damage in an elevator or car, so a home visit for Haier is not just convenient but also a way to keep the matrix intact: even careful transport without the original box often ends with a crack in the corners of the panel.

Free diagnostics and cost approval

Diagnostics are free, and the technician quotes the price after them—once it's clear which component in the Haier TV has failed. We first check the power supply, then the backlight and main board, and if needed, inspect the condition of connectors and ribbon cables, as well as how the unit responds to being plugged in. Based on the results, the technician explains which part has failed and what Haier spares are needed—from the power supply to backlight strips and T-CON. We also discuss what we'll replace right away and what can be postponed without risk to other components. Approving the cost before work begins lets you calmly decide whether to restore the TV or not, with no surprises at the end: you know in advance which components we're replacing and why, and you can decline if the repair isn't worthwhile.

Repair at home or at the service center—which to choose

We service Haier both on-site and at our workshop — the format depends on the fault: some jobs are easier to do on-site, while others require a bench. Replacing the power supply, repairing the main board, and fixing poor contact in connectors are usually done at the customer's home in a single visit. If the fault involves the matrix or requires disassembling the panel, the technician will tell you in advance which format is suitable so you don't move the TV unnecessarily. At the workshop, it's more convenient to work with the backlight and panel — there's a flat surface and lighting for precise assembly, as well as the ability to run the device under load after replacing the strips. We provide a 1-year warranty on labor and parts, so we choose the format based on the task, not on the convenience of a call-out.

Warranty and repair after the manufacturer's warranty

Warranty obligations and working with equipment whose factory warranty has expired are the main questions a Haier owner has before requesting service. Let's clarify what exactly we cover and how we handle a recurring fault.

1-year warranty on labor and parts

We provide a 1-year warranty on labor and parts — including the replacement of the backlight and matrix on Haier TVs. LED backlight is the most frequently replaced component in panel TVs: LED degradation happens gradually, and after installing new strips the screen returns to its original brightness. The matrix is more expensive to service, so a one-year warranty on it is insurance against reopening the panel: if the new module produces dead pixels or lines, we'll deal with it, not the owner. The parts warranty means that if the same part fails again, the owner doesn't pay for it a second time. One year covers both labor and the part itself — these are separate parts of the obligation, and both apply simultaneously.

Haier service after the manufacturer's warranty expires

We repair Haier TVs even after the factory warranty has expired — the age of the equipment doesn't hinder diagnostics or repair. Discontinued models come to us regularly: our technicians have 4 to 20 years of experience, and they navigate old series' boards and backlights as confidently as current ones. Diagnostics are free: a technician arrives at your home within 60 minutes anywhere in the city, opens the panel, checks the power supply, backlight, and main board, and identifies the cause. They quote the price after the inspection — before you agree to the work. When the factory warranty has expired, it's especially important to describe the symptom before the visit: the more accurate the description, the faster the technician can pinpoint the component.

What to do if the same fault recurs after service

If the same Haier fault returns after repair, we handle it under warranty — a repeat visit and component check are included. The owner just needs to describe how the symptom appeared: the same lines, the same protection shutdown, the same indicator blinking. A recurring symptom often indicates not a 'bad' part but a related cause that should be checked alongside the main one: overheating due to clogged ventilation channels, voltage drop in the outlet, an oxidized ribbon cable near the replaced component. That's why the technician checks not only the part they replaced but also adjacent circuits. You can pay via Kaspi QR, Kaspi Red, card, cash or bank transfer, and the warranty period doesn't depend on it; a repeat check of the component is free for the owner.

What can actually be repaired and what can't

Not every Haier fault is worth fixing. We'll honestly tell you where repair is justified and where the cost outweighs the benefit of a working device.

Cracked Haier screen — can it be fixed?

A cracked Haier matrix can be restored by replacing the screen, but feasibility depends on the model and the condition of other components. The panel is the most expensive part of the device, and replacing it requires completely disassembling the case, removing the frame, and transferring the LED backlight with diffusers. On compact models up to 32 inches, the panel is rarely replaced: the component's lifespan is comparable to the rest of the hardware, and after installation it's important to check the power supply for voltage drops. On large 4K devices, matrix replacement is justified when the boards, tuner, and sound are working — then the screen restores the TV's full functionality. With a cracked screen, the technician evaluates not only the matrix itself but also the backlight and boards — sometimes it's cheaper to replace the TV than the panel.

Repair or buy a new TV: how to decide

The decision to repair or buy a new Haier depends on which component has failed and how much life the rest of the TV has left. Local faults — power supply, LED backlight, T-CON — are fixed by replacing the specific module, and the TV keeps working with its original panel and casing. The panel is a different story: when it's damaged beyond repair, you're weighing a panel replacement against buying a new TV, and screen size, resolution, and model year all matter. Before disassembly, the technician checks the power supply, backlight, and T-CON so they don't replace working parts, and gives you the cost after free diagnostics. With a local fault — power, backlight, T-CON — the repair usually gets the TV working again; with a damaged panel, it's worth calmly comparing your options.

When Haier TV repair is the best option

We've gathered the key signs of Haier TV failures in one place so you can quickly get your bearings before the technician arrives and avoid replacing working parts at random.

  • Indicator and startup: a blinking red light and refusal to turn on are more often linked to the power supply and control board, not the remote.
  • Sound but no picture: if you have sound but no image, the issue narrows down to the backlight or T-CON.
  • Lines and spots: such defects point to the panel, ribbon cables, or T-CON; diagnostics pinpoints the exact cause.
  • Repair format: an in-home visit keeps the panel intact, while in-shop repair is chosen for the specific fault.
  • Cracked screen: this is a reason to assess whether repair makes sense, not to automatically replace the panel.

63brands

Besides Haier, we repair other TV brands in Astana

We work with TVs of every brand sold in Kazakhstan — from Samsung, LG and Sony to Artel, Yasin, Kivi, Hyundai, Thomson and rare makes. Can’t find yours? Call anyway — a technician will come and take a look.

We also repairWe also repairTECH SERVICE08

Besides Haier TV repair, we fix other equipment in Astana

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE09

Worth reading before Haier TV repair in Astana

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp