Василий Е.Order No. TSA-73295 · 24 November 2025
oursСмотрел, чтобы был свой склад запчастей, а не под заказ. Думал, показалось, ан нет: не включается. Полёт нормальный)
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 096 59 61Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
We'll arrive within 60 minutes anywhere in the city. Free diagnostics — we'll tell you the cause and the price.
Our own technicians4 to 20 years of experience




Repair prices
The most common symptoms customers call about. The technician gives the exact cause and price after diagnostics.
power supply, control board or power cord
from8 000 ₸
backlight, panel or ribbon cable
from9 000 ₸
speakers, amplifier or settings
from7 000 ₸
panel ribbon cable, T-CON board or backlight
from9 500 ₸
remote, IR receiver or board
from9 500 ₸
overheating, power supply or board
from8 000 ₸
antenna, cable or tuner
from3 500 ₸
power supply, backlight or board
from8 000 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1 visittime
from 9,000 ₸cost

BeforeAfter5 steps

Five steps from your request to checking the work.
Describe the symptom by phone or messenger and confirm the address.
The technician brings tools and common parts and asks about how the TV is used.
Clear access to the TV, move fragile items away, and have the remote and documents ready.
The technician explains what to do if repair isn't worth it and how to take the TV to the workshop.
We turn the TV on together and check the picture and sound after reassembly.
We reply during working hours
Have the TV model, its age and a description of the symptoms ready — this speeds up scheduling the technician's visit.

Warranty question? Call us
+7 (778) 096 59 616 127 reviews of repairs at TECH SERVICE in total
Василий Е.Order No. TSA-73295 · 24 November 2025
oursСмотрел, чтобы был свой склад запчастей, а не под заказ. Думал, показалось, ан нет: не включается. Полёт нормальный)
Борис В.Order No. 2104-1725 · 17 June 2021
oursВ Астане с сервисами беда, поэтому выбирал по отзывам. Жалоба одна: зависает. Прошивка та же, ничего не сбросили.
Оксана Т.Order No. AS-7851 · 12 January 2021
oursСосед по площадке хвалил, решил проверить. Проблема ровно одна: слетела прошивка. Ни шума, ни запаха, всё штатно.
Юрий М.Order No. AS-5720 · 30 November 2020
oursДиагностика ТВ-приставки — с неё и начал. Первое, что заметил: не включается. Мастер сам предложил забрать технику на следующий день. Нужна была новая деталь: плата. Ни разу не пожалел.
Валерий Д.Order No. AS-9378 · 4 November 2020
oursОсновная жалоба — зависает. Сергей Архипов пообещал и сделал, без напоминаний. Сделали так, что и не придерёшься.
Екатерина К.Order No. ZK-2020-507 · 3 November 2020
oursИскал, кто роботает в субботу, у нас с женой график сложный. Вчера работало, сегодня уже зависает. Сергей Архипов пообещал и сделал, без напоминаний. Обошлось заменой: блок питания. Сделали так, что и не придерёшься.
Иван Н.Order No. ZK-2019-901 · 19 January 2019
oursБыло важно успеть до конца недели, а то морозы обещали. В работе было: спутниковый ресивер. Проблема ровно одна: зависает. Вскрытие показало: тюнер. Посмотрели, назвали срок, уложились. После ремонта — как новое.
Борис В.Order No. 1807-5828 · 7 March 2018
oursПереезжали в новую квартиру, техника после перевозки захандрила. Жалоба одна: нет картинки. Функционирует, тьфу-тьфу
Екатерина К.Order No. ZK-2017-935 · 4 November 2017
oursЗимой без техники никак, поэтому тянуть было нельзя. Проверил всё, что мог: зависает. Диагностику провели при мне, ничего не унесли в подсобку. Отдал 7 000 и не жалею. Вышло из строя: блок питания. Спасибо, что выручили. Вернули — проверил, всё ок
Ырысгуль Н.Order No. AST-1711-389 · 20 May 2017
oursТелефонмен кеңестім, кейін апардым. Ескі бөлшекті көрсетіп, қайтарып берді. Қосымша жұмыс қажет болды, бірақ бағаны көтермеді. Түскі үзіліске қарамастан қабылдады. Екі күнен кейін өзі қоңырау шалды. Кепілдік берді, бұл маңызды. Мастер бәрін түсіндірді. Жақсы сервис.
experience10 yearsTV screen replacement technician
experience7 yearsLead electronics repair technician
experience10 yearsMobile PC repair technician
experience10 yearsLaptop repair and assessment technician
experience15 yearsDigital device repair technician
Didn’t find the answer? Message us on WhatsApp.
Ask a questionYes, Horizont TVs are repaired in Astana: a Tech Service technician comes to your home anywhere in the city. We handle both CRT and LCD models, and diagnostics are free. We can repair on site or at the service center if disassembly is needed.
A CRT Horizont can be fixed if the tube isn't damaged and the right parts are available — it depends on the model. Repair is often worth it, but if there's serious wear, the technician will tell you after diagnostics what makes more sense.
If the screen stays dark when you turn it on but there's sound and you can see a faint image with a flashlight, it's most likely the backlight. Only diagnostics gives a precise answer: the matrix and backlight are checked separately, and it depends on the model.
First check the remote: the batteries and whether the phone camera light flashes when you press buttons. If the remote works but the Horizont TV doesn't respond, the problem may be in the IR receiver — diagnostics will show that.
The lines themselves aren't dangerous to people, but they signal a fault in the ribbon cable, board, or matrix. If you keep using a Horizont with lines, the defect can get worse, so it's better to have a technician look at it.
Yes, there's a 1-year warranty on labor and parts installed during Horizont repairs. The technician explains the warranty terms when you pick up the TV after repair.

Author: Oraza B.,TV screen replacement technician
Published
Updated
Tech Service repairs Horizont TVs in Astana at your home or in our service center. Our technicians have 4 to 20 years of experience, can decode error codes and typical faults for this brand, arrive within 60 minutes anywhere in the city, provide free diagnostics, and offer a 1-year warranty on labor and parts.
Horizont was produced for decades, and the approach to repairing CRT, early LCD, and LED models differs. Let's break down what exactly comes to us for work and what specifics it has.
We take in CRT and early LCD Horizont TVs and know their weak points — the line scan unit, the CRT, and the power supply capacitors. Repairing a CRT Horizont TV starts with checking the tube's remaining life. In tubes with a diagonal of 21–32 inches, the line scan usually fails first: a whistle appears, the picture shrinks horizontally or disappears entirely. In early LCD models with backlight lamps and first inverters, the electrolytic capacitors in the power supply are the first to give out — because of them the set clicks and won't start. Soldering in such chassis is dense, so we work with a temperature-controlled soldering station, not a household soldering iron. In old models, it's more important not to replace a unit but to assess the condition of the rest — a worn-out CRT makes restoring the board pointless, so we start diagnostics with the tube's remaining life.
For Horizont LED models, people most often contact us about the backlight — the screen goes dark or dims while the sound remains. In series with edge lighting, the LEDs are arranged in a single row along the bottom edge: one burns out and the driver goes into protection, turning off the entire panel. In models with direct backlighting, the diodes are distributed across the whole area, so a failure shows up as spots and dark zones rather than a complete blackout. Control boards in LED models suffer from overheating when ventilation grilles are clogged and from power surges. LED burnout happens gradually, so the first signal is often uneven brightness at the edges rather than a complete blackout — this sign is worth remembering so you don't run the unit until the entire strip needs replacing.
| Unit or fault | Where we repair | What we check |
|---|---|---|
| Power supply, capacitors | On-site | Power, response to turning on |
| LED backlight | On-site or in the service center | Evenness of glow, strips |
| Control board | On-site or in the service center | Response to remote and buttons |
| Matrix ribbons | In the service center | Contact, ribbon integrity |
| Matrix | In the service center | Dead pixels, lines |
"Won't turn on" for Horizont means different things — from standby mode to triggered power supply protection. Let's break down the signals the TV gives before you call a technician.
A lit red indicator on a Horizont means standby power is present but the main unit isn't starting — we check the power supply and control board. Standby mode keeps voltage on a small unit that powers the command receiver and waits for a start signal. When this signal passes but the main converter doesn't output working voltages, the picture remains the same: the light is on, the matrix doesn't light up. The cause may be in the electrolytic capacitors, the switching transistor, or the PWM circuitry, and sometimes the control board itself is to blame for not issuing the start command. If the indicator responds to the remote but the screen doesn't light up, the problem is more often in the start circuit rather than the remote itself — so we start checking with the power supply, not by replacing batteries.
A blinking indicator on a Horizont is a self-diagnostic signal, and the number of blinks in a series points to the component the TV considers faulty. The control board processor runs a test at startup and, if a component doesn't respond, turns the lamp off and on in series with a pause. The number of flashes in a series and the length of the pauses indicate the direction: power supply, horizontal scan, backlight, or communication with the main board. Different chassis have their own set of codes, so there is no universal table—the sequence is what matters. It's worth counting the blinks before the technician arrives and writing them down: this sequence narrows down the checks and saves diagnostic time, whereas "it just blinks" gives almost no information. This self-diagnostic signal is also present on Horizont models with electronic control.
After a power surge, Horizont TVs more often have failed power supply capacitors, and after a liquid spill, the control board and ribbon cables. The switching power supply takes the hit during a mains spike: electrolytic capacitors bulge, the key transistor breaks down, and the varistor that should have absorbed the pulse burns out. Liquid acts differently—it spreads over the lower boards, oxidizes traces and connectors, and the ribbon cables between the main board and the panel lose contact. Moreover, moisture damage doesn't always show up immediately: the TV may turn on, run for a couple of minutes, and then go dark. You shouldn't turn the TV on again after a spill—moisture under voltage finishes off components that could still have been saved by drying and cleaning. We provide free diagnostics, and a technician can be at your door within 60 minutes in the city.
From the picture and sound, you can roughly tell which component of your Horizont has failed. Here are three common scenarios and how we distinguish them during diagnostics.
A black screen with sound on a Horizont usually points to the backlight rather than the panel—we check the LED strips and backlight power. In LED models, the backlight consists of dozens of LEDs behind the diffuser, and failure of even a few shuts down the entire circuit: the driver goes into protection, the picture disappears, but sound and menu keep working. During diagnostics, we open the panel, test the strips section by section, and check the driver output voltage—a sagging supply indicates LED degradation, not a board failure. The panel is usually intact in this scenario. If you can see a faint image with a bright flashlight at an angle, the panel is alive and the issue is the backlight—this simple test is worth doing before the technician arrives.
Lines on a Horizont screen can come from the panel's ribbon cables or from the panel itself, and you can tell them apart by how the picture behaves when you lightly press on the frame. The ribbon cable connects the T-CON board to the panel, and a poor contact in the connector causes straight vertical or horizontal lines, sometimes with a band of dead pixels along the edge. Oxidation and microcracks in the cable appear from overheating and temperature swings—when you press on the frame, the contact temporarily restores and the lines disappear. If the defect stays fixed and doesn't react to pressing, the cause is more often the panel itself or the T-CON board. If the lines change when pressed, the chance of fixing it by re-soldering the cable is higher than with "frozen" lines—there it's more often about the panel.
Loss of sound on a Horizont is more often related to the control board or speakers, and no response to the remote—to the IR receiver or body buttons. On the control board, a separate amplifier handles sound, and its failure causes crackling, hissing, or complete silence with a live picture; speakers are checked by testing the coil for an open circuit. With the remote, the picture is different: the IR receiver on the front panel receives the signal and passes it to the board, and if it fails, the TV doesn't see any remote, even a new one. Checking with the body buttons separates a faulty remote from the receiver—if the TV responds to the buttons, the issue is in the remote or IR receiver.
Our Horizont repair follows a single procedure—from request to post-repair check. Here are the steps and what the technician does specifically for this brand.
We take your request and arrive within 60 minutes anywhere in the city. The technician comes to your home with diagnostic tools. The on-site format covers most Horizont calls: we open the back panel, test the power supply, the line output stage on CRT models, and the backlight circuit on LCDs. We also check the power supply, inverter, and control board right there — the indicator light and the sound of the line transformer immediately show which unit is causing the problem. This TV repair for Horizont in Astana starts with a home visit, while TVs with a diagonal of 32 inches or more are usually serviced in the workshop, where there is room to disassemble the matrix. Before the visit, please clear access to the back panel and have the Horizont model number ready — this speeds up diagnostics because the model tells us which board and backlight are installed in the set.
Diagnostics are free, and the technician quotes the price after them and agrees on the scope of work before starting. First, we measure the output voltages of the power supply, check the integrity of the LED backlight strips and the test points on the control board, and only then state the cause and the list of parts to replace. Approval is done point by point: the client sees exactly what is broken in their Horizont and why the unit won't work without fixing it. This approach protects against surprises during the process — if we find a second faulty unit during disassembly, we come back for approval instead of adding it silently. In my opinion, this step saves the most nerves: the person knows the final scope of work in advance.
After the work, we test the TV and provide a 1-year warranty on labor and parts. Payment is accepted by all methods. Testing includes running the TV on different signal sources, warming up the power supply under load, and checking the backlight for evenness — on Horizont sets with LED matrices, this is the main sign of quality soldering of the strips. The technician listens to the sound and checks over-the-air channel reception so that no hidden defects remain after reassembly that could show up a week later. The warranty on parts is just as important as on labor — if the same unit fails again, the claim is handled as a single request, not split between 'part' and 'technician'. For the owner, this means one thing: a repeat visit for the same fault doesn't turn into an argument about who is responsible.
Sometimes it's more honest to say that restoration doesn't make sense. We explain in which cases we advise against investing in an old Horizont and how we assess the prospects of a device before disassembly.
We don't take on the job if an old Horizont has a worn-out CRT or a matrix that needs replacement — in these cases, the costs don't pay off. In CRT models, the tube's lifespan is limited, and replacing this unit in terms of labor is comparable to buying a working set. In LCD panels, the matrix is the most expensive component: replacing it eats up the entire budget, and compatibility between panel generations is limited. The criterion is simple: a failure of a consumable unit — capacitors, backlight, ribbon cable — justifies intervention, while a resource unit — CRT or matrix — makes it unprofitable. In our practice, sets with a worn-out tube or a cracked panel usually go for parts. Before agreeing to an expensive repair, ask the specialist to name exactly which unit has failed and whether it is a resource unit.
Before any work begins, the technician gives you a likely outcome and will honestly tell you if repairing isn't worth it — the decision is yours. After the free diagnostics, they explain which component failed, what category it falls into, and what options you have. The cost of work is quoted before repairs start, so you understand the investment and can weigh it against buying a new appliance. Declining work after diagnostics comes with no obligation — it's part of a transparent process, not an exception. Within the city, our technician arrives at your home within 60 minutes, so assessing whether a repair makes sense doesn't drag on over multiple visits. In my view, an honest conversation about the appliance's prospects before disassembly saves the owner both money and time. When a technician says a repair isn't worth it, that's not an excuse — it's a calculation for the specific component.
Here's what matters most when deciding what to do: how to narrow down the fault based on symptoms, and when repairing a Horizont TV makes sense.
63brands
We work with TVs of every brand sold in Kazakhstan — from Samsung, LG and Sony to Artel, Yasin, Kivi, Hyundai, Thomson and rare makes. Can’t find yours? Call anyway — a technician will come and take a look.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your TV won't turn on, first check the outlet, power cable, and the button on the TV itself—not the remote.
21 November 2025 · 12 minutes read
If your laptop screen is broken, turn the device off first, don't press on the display, and check the picture through an external monitor.
12 March 2026 · 11 minutes read
If your phone won't charge, start by checking the adapter, cable, and port, then the charging settings.
16 February 2026 · 12 minutes read
If your laptop freezes, the first thing to do is restart it and check Task Manager to see what's loading the CPU and memory.
25 January 2026 · 12 minutes read
If your phone falls in water, take it out right away, turn it off, and don't charge it.
19 January 2026 · 12 minutes read
If your phone camera isn't working, first check app permissions, clear the cache, and restart your phone — this fixes some software glitches.
24 December 2025 · 13 minutes read












