experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 046 88 53Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Diagnostics are free.
Our own technicians4 to 20 years of experience




Repair prices
The symptoms customers most often report and their likely causes — starting with the most common.
plug, cord, or button
from2 500 ₸
thermostat or steam tube
from3 000 ₸
seam, gasket, or crack
from4 500 ₸
contacts or spring
from3 500 ₸
heating element or plastic
from4 000 ₸
heating element or wiring
from5 500 ₸
scale on the heating element
from4 000 ₸
latch or hinge
from5 500 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1–2 hourstime
from 3 000 ₸cost

BeforeAfter5 steps

Five steps from request to performance check.
You submit a request, and the technician clarifies the symptom and kettle model.
The technician comes to the address where the kettle is used and works on site.
The technician lists the parts to check and opens the body only after approval.
The technician lists the work and part before starting the repair and confirms after inspection.
We check performance after reassembly: boiling and auto shut-off.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Submit a request — diagnostics are free. The technician will clarify the symptom and kettle model.

Warranty question? Call us
+7 (778) 046 88 537 898 reviews of repairs at TECH SERVICE in total
Тимур И.Order No. ZK-1117 · 3 July 2025
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. Повод для визита: течёт. В тех сервис привёл знакомый, у него тут чинили ноут. Сделали аккуратно, следов разборки не видно)
Марат Ж.Order No. TS-2410-995 · 10 August 2024
oursБыло подозрение, что дело в плате, хотелось услышать второе мнение. Проблема — выключается раньше. Проверил дома — всё на месте, ничего не забыли.
Наталья С.Order No. 66024 · 5 November 2022
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. Больше всего напрягало: не кипятит. Дамир М подсказал, как продлить жизнь технике. Ребёнок уже проверил на прочность, держится.
Данияр С.Order No. TS-2207-983 · 13 March 2022
oursБұрын осында ноутбук жөндеткенмін, сондықтан сеніммен келдім. Ескі бөлшекті қайтарып берді, әдетте олай жасамайды. Енді басқа жерге бармаймын!!
Евгений М.Order No. 2020-1292 · 4 September 2020
oursДо этого обращался в другой сервис, там только развели руками. Я человек терпеливый, но тут уже думал всё. С чем пришёл: течёт. Работает как раньше, придирок нет.
Талгат С.Order No. 2019-2099 · 30 January 2019
oursДамир М честно сказал, что менять, а что ещё походит. Работает как раньше, придирок нет)
Айнур М.Order No. TS-3456 · 23 January 2019
oursСмотрел, у кого есть запчасти на такую модель. Первое, что заметил: выключаеться раньше. Дамир М снял деталь, показал износ, вопросов не осталось. Внешне как новый, если не считать мелкой царапины.
Максат О.Order No. 11917 · 20 March 2018
oursСмотрел, у кого есть запчасти на такую модель. Самое обидное — поломка случилась не вовремя. Симптом был очевидный: течёт. Отдельно спасибо мастеру — Дамир М, терпения ему хватило. Нужна была замена: тэн. С тех пор ни разу не подвёл!!
Максим Ю.Order No. 58713 · 3 May 2016
oursПовод для визита: течёт. Отдельно спосибо мастеру — Дамир М, терпения ему хватило. Сказать, что доволен — ничего не сказать
Аружан К.Order No. 2016-7093 · 26 April 2016
oursПробовал найти мастера в своём районе, но все были заняты. Вышло дешевле нового, что логично. Уже полгода — ни одного сбоя.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionIt depends on the model: on some Centek kettles the contact group in the base is replaced separately, while on others it comes as one unit with the base. The technician takes the assembly apart and decides what makes more sense — replacing the contacts or fitting a new base.
Yes, using a kettle like that is risky: melted plastic and burnt contacts can cause a short circuit. Unplug the appliance and don't turn it on until a technician has looked at it.
Most often it's the contacts between the kettle and the base, the power cord, or the thermal fuse. It depends on the model, so the exact cause is found by taking it apart and checking the components during free diagnostics.
A leak from under the lid is usually fixed by replacing the seal or repairing the lid, while a gap in the body seam depends on the model and the material of the jug. The technician will inspect the appliance and tell you whether it can be repaired by Centek.
First comes free diagnostics: the technician takes the kettle apart, checks the contacts, thermostat, and heating element, then agrees on the scope of work. After replacing the component, they reassemble the appliance and test the auto shut-off at boiling.
It's best to unplug an appliance like that right away: an electric shock means damaged insulation or moisture getting onto the contacts. After that, a technician needs to inspect it — you shouldn't take apart a kettle that's plugged in yourself.
Tech Service repairs Centek electric kettles and thermal pots in Almaty: a technician arrives at your home within 60 minutes anywhere in the city or takes the equipment to the service center. Diagnostics are free, there's a 1-year warranty on labor and parts, and the technician quotes the price after diagnostics. We work as a direct contractor, with no middlemen.
The owner notices a symptom: the appliance doesn't heat water, doesn't switch off after boiling, leaks, gives an electric shock, or the indicator light doesn't come on. We explain which component is responsible for each failure and what the technician does about it.
We start Centek kettle repair in Almaty by checking the power circuit—most often the contact group, the thermostat switch, or the heating element itself is to blame. The contact group transfers power from the base to the heating element, and its burnt contacts are a typical reason the appliance doesn't start at all. The thermostat switch opens the circuit when overheated and loses contact over time. We check the heating element separately: a broken coil or a short to the body is visible when testing with a multimeter. If the indicator light is on but the water doesn't heat, power reaches the base but not the heating element—this narrows diagnostics to the contact group and the heating disc, and the technician tests them before disassembling the body. The heating indicator confirms that the power supply is working and the fault is localized inside the device.
The thermostat is responsible for auto shut-off, and in Centek kettles it's most often the part that fails—the contact doesn't open after boiling. Inside there's a bimetallic plate: it bends from heat and breaks the circuit, but after repeated cycles it loses elasticity or the contacts burn, and it doesn't open. Less often the thermostat switch itself is to blame, as it doesn't reset the heating command. We test the unit for activation during a control boil and check the contacts with a multimeter. If the appliance boils and doesn't switch off, don't leave it unattended until it's repaired—if the thermostat fails, the water boils away, the exposed heating element becomes uncovered and overheats, which increases the scope of work. Replacing the thermostat costs less than the consequences of overheating the body and coil.
Not every part of a kettle is replaced as a separate item: some components come as an assembly. Below we show what is serviced separately, what is replaced as a unit, and where to find replacement parts for your model.
| Component | Replacement | What we check before replacement | Type of failure |
|---|---|---|---|
| Thermostat | separately | activation during boiling | doesn't switch off |
| Thermostat switch | separately | button travel, contact | doesn't turn on, melted |
| Contact group | separately or with the base | continuity test of contacts | indicator light off |
| Base with contacts | as an assembly | body fit, heating | indicator light off, doesn't heat |
| Lid seal | separately | elasticity, fit | leaks from under the lid |
| Base gasket | separately | seam tightness | leaks along the seam |
| Glass or metal flask | as an assembly | cracks, chips | cracked, leaks |
The lid, handle, and base of Centek kettles are replaceable mechanical parts, and we match them to the specific model — CT-0061, CT-0064, CT-0068, CT-1058, CT-1068, and others. The fitting dimensions vary between series: kettles with a wide push-button lid have the latch included with the seal, while models with a flip lid have the handle attached to the body with two screws and can be replaced without disassembling the flask. The base with contacts is the part that connects to the body through the contact group, so if there is play or the contacts are dark, the technician checks both parts of the pair, not just the bottom plate. If the lid breaks, don't put a random one on the kettle — an improper fit breaks the seal, and water starts leaking along the seam even with an intact gasket. The technician quotes the cost of Centek kettle repair after free diagnostics, once it's clear which unit needs replacing.
In kettles with an exposed heating element, the coil contacts the water directly and scales up faster, while in models with a concealed disc, the heater is hidden under the bottom of the flask and suffers from overheating when operated without water. The exposed coil is mounted inside the flask on a holder and is visible when the lid is off: carbon deposits and salt buildup on the turns cause whistling during boiling and false triggering of the thermostat. The disc heater is pressed into the base, so overheating deforms the disc itself and the adjacent gasket — a leak appears along the seam, not on the coils. Scale and voltage fluctuations accelerate wear on the heating element and thermostat, so regular cleaning extends the life of components that would otherwise need replacing.
The process follows the same pattern whether the technician comes to your home or you bring the appliance to the service center. Here are the steps from diagnostics to checking the auto-shutoff.
Diagnostics are free, and the technician starts by testing the contacts, checking the heating element and thermostat, then disassembles the body and checks the seals for tightness. First, the heater coil is tested with a multimeter for breaks and shorts to the body, then the thermostat is checked for triggering and the base contact group for burning. In kettles with a concealed heating element, the disc and the sealing ring around the perimeter are inspected; in models with an exposed coil, the terminals and insulators are checked. Disassembly of the body is not always necessary: some faults are visible at the testing stage. Testing before disassembly saves time and lets us name the cause right away — if the circuit is intact, the technician doesn't take the body apart unnecessarily and moves on to checking the base and contact group. The technician explains the cost of Centek kettle repair after free diagnostics, once the cause of the failure is clear.
After replacing the unit, the technician reassembles the kettle and checks the auto-shutoff when boiling and the body's tightness — without this, the work is not considered complete. The specific unit is replaced: thermostat, contact group, heating element, or seal, not the entire appliance if the other parts are working. Reassembly is done in reverse order, ensuring the ring fits properly and the lid is tight, then water is filled to the maximum mark and brought to a boil. The technician watches that the lever clicks off when boiling, the contact opens, and switching on again works normally. The auto-shutoff test is done with water, not dry — only this way can you see that the thermostat opens the contact exactly at boiling, not earlier or later.
The technician arrives at your home within 60 minutes anywhere in the city, or you can bring the kettle to the service center — both options are available, and you choose. The mobile technician carries testing tools and common parts, so most faults are fixed on the spot. Service center repair is chosen when the flask needs disassembly or the heating element requires soldering. If the fault involves the base or contact group, testing and unit replacement at home are often enough, while complex cases with the flask are better handled at the service center where everything is at hand. Our technician arrives anywhere in the city within an hour — when you call, specify the model and symptom so they bring the right part.
Not every breakdown is worth fixing. We break down which Centek components are repairable, when replacing the kettle makes more sense than restoring it, and why free diagnostics saves you money.
If the body is damaged with a crack along its entire height, the heating element is punctured in a non-disassemblable flask, or the needed component isn't available for a specific model, replacing the kettle may be more sensible than restoring it. With a plastic body cracked through its full height, restoring watertightness is unreliable: heat widens the crack and moisture reaches the contacts again. A punctured heater in a non-disassemblable flask can't be restored—the unit is replaced entirely or the appliance is replaced. A glass flask with a crack isn't soldered either: it's installed as an assembly, and without the needed part for a specific model, the job drags on. We also accept Centek kettles bought outside Kazakhstan—but before restoration, the technician checks whether a replacement unit is available for that version. The decision on whether the work is worthwhile is made after free diagnostics, when the cause of failure is clear.
Equipment owners want to know upfront what they'll get for the service and what the total is made of. We explain the warranty, free diagnostics, and payment procedure—no price list, just the terms of service.
We provide a 1-year warranty on labor and parts—if the appliance acts up again after service, you come back to us under warranty. It covers both the replaced component and the technician's work: the heating element, the thermostat, and the contact button all fall under the same term. Our technicians have 4 to 20 years of experience with appliances, so they identify typical Centek defects faster by symptoms. The cost of Centek kettle repair depends on the component and scope of work, and the exact amount is quoted after free diagnostics. In my view, a year is a reasonable term for this type of appliance: the main load comes from daily boiling, and the weak spot shows up in the first months. Keep your confirmation—if you return under warranty, the issue is resolved faster because it's clear which component was replaced and when.
Diagnostics are free, and the specialist quotes the cost after them—when it's clear which component has failed and what needs replacing. First, they test the circuit, check the heating element, thermostat, and base contacts, and only then give you the amount. How much Centek kettle restoration costs depends on the component and scope of work: replacing the heating element and repairing the contact group are operations of different complexity. It's impossible to name a price before disassembly—you can't tell from the outside whether the heating element has burned out or the issue is the thermostat. In our practice, this is the main reason owners are surprised by the final amount: the breakdown turns out deeper than it looked. Diagnostics are free precisely so you can decide whether to proceed, already knowing the exact cause.
We work as a direct contractor — our own technician comes to your home or takes the appliance to the service center, with no middlemen or aggregators, and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. The on-site technician arrives within 60 minutes anywhere in the city, so you don't need to bring the equipment yourself. Payment isn't tied to a single method: pay however is convenient. With a direct contractor, the person who diagnosed the device usually sees the job through to the end — this makes it easier to resolve warranty disputes, since you don't have to retell the story of the breakdown to someone else. In our experience, this continuity saves time: on a repeat visit, just give the date of the previous visit, and the technician will pull up their notes on that specific appliance.
Below is a quick summary of Centek kettle breakdowns, the repairability of components, and the terms that remove the main risk when restoring an appliance: paying for work that won't bring the device back to life.
32brands
We repair Centek kettles and other brands that have dedicated pages on the site.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
Washing machine error codes are self-diagnostic codes that point to a specific component: drain, water fill, heating, motor, or door lock.
29 January 2026 · 13 minutes read












