experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 046 88 53Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics.
Our own technicians4 to 20 years of experience




Repair prices
Eight common symptoms and their likely causes, from most to least frequent.
contacts, heating element, thermostat
from3 000 ₸
thermostat, steam tube
from3 000 ₸
gasket, crack in the body, valve
from4 500 ₸
heating element, plastic
from4 000 ₸
scale, mounting
from4 000 ₸
heating element short, moisture in contacts
from4 500 ₸
mechanism, spring
from3 500 ₸
indicator, contacts
from3 500 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1–2 hourstime
from 3 500 ₸cost

BeforeAfter5 steps

Five steps from request to checking the kettle's operation.
Describe the symptom and model — the technician will prepare tools and parts.
The technician arrives anywhere in the city within 60 minutes of the request.
The technician brings parts matched to the model and agrees on the replacement on site.
You approve the scope of work and the part, and only then does the technician start.
The technician cleans up the workspace and leaves the old part with the owner.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Describe the symptom and kettle model in your request — the technician will bring the necessary parts and tools for the visit.

Warranty question? Call us
+7 (778) 046 88 537 898 reviews of repairs at TECH SERVICE in total
Жанар Т.Order No. 486714 · 30 October 2025
oursДо этого обращался в другой сервис, там только развели руками. Была паника, если честно. Симптом был очевидный: течёт. Поставили новую деталь: тэн. Работает как раньше, придирок нет)
Сабина Г.Order No. 2025-1139 · 16 February 2025
oursДруг посоветовал, у него похожая история была. Ещё утром всё работало, а к вечеру — не кипятит. Нужна была замена: тэн. Оплатил картой, чек дали. Включил, проверил, работает.
Наталья С.Order No. 66024 · 5 November 2022
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. Больше всего напрягало: не кипятит. Дамир М подсказал, как продлить жизнь технике. Ребёнок уже проверил на прочность, держится.
Ляззат К.Order No. TS-5651 · 25 July 2021
oursСимптом был очевидный: выключаеться раньше. Радик Т всё объяснил и не пытался впарить лишнее. Внешне как новый, если не считать мелкой царапины)
Роман З.Order No. TS-2107-928 · 26 January 2021
oursЖалоба простая: выключается раньше. Радик Т перезвонил, когда всё было готово. Проверили на всех режимах, всё чётко.
Евгений М.Order No. 2020-1292 · 4 September 2020
oursДо этого обращался в другой сервис, там только развели руками. Я человек терпеливый, но тут уже думал всё. С чем пришёл: течёт. Работает как раньше, придирок нет.
Талгат С.Order No. 2019-2099 · 30 January 2019
oursДамир М честно сказал, что менять, а что ещё походит. Работает как раньше, придирок нет)
Айнур М.Order No. TS-3456 · 23 January 2019
oursСмотрел, у кого есть запчасти на такую модель. Первое, что заметил: выключаеться раньше. Дамир М снял деталь, показал износ, вопросов не осталось. Внешне как новый, если не считать мелкой царапины.
Анна Т.Order No. 62104 · 15 November 2018
oursДруг посоветовал, у него похожая история была. Сначала думал, что ерунда, но появилось: не кипятит. Отдал 6 500, и это вместе с работой. Внешне как новый, если не считать мелкой царапины.
Эльвира Д.Order No. 549633 · 31 May 2016
oursСмотрел, у кого есть запчасти на такую модель. Техника работала годами, а тут — выключается раньше. Дамир М взялся за то, от чего другие отказались. Цену обсудили до начала, сюрпризов не было. Сделали и забыл про проблему!!
Didn’t find the answer? Message us on WhatsApp.
Ask a questionIn Ava kettles, the thermostat, power button, and base contacts most often fail; the heating element less so. The weak points depend on the model and how intensively it's used. A technician will pinpoint the cause during free diagnostics.
This usually means a protection feature has kicked in: a faulty thermostat, sensor, or a loose heating contact. It can be fixed by replacing the specific component. The technician will determine the exact cause during free diagnostics.
First check the outlet and make sure the kettle sits firmly on its base. If the indicator doesn't light up, the cause may be the button, the light, or the control board. A technician will identify the fault during diagnostics and suggest a repair.
It depends on the model and the nature of the damage: sometimes the seal can be restored, and sometimes replacing the body isn't worth it. A technician will inspect the kettle during free diagnostics and tell you what can realistically be done. You decide before any work begins.
Yes, there is a 1-year warranty on labor and parts installed. This covers heating element replacement and any other work performed. The technician will explain the warranty terms when you approve the repair.
A technician arrives at your home anywhere in Almaty within 60 minutes of your request. Most Ava kettle breakdowns are fixed on-site; the device is only taken to the service center in certain cases. On-site diagnostics are free.
Tech Service repairs Ava kettles in Almaty as a direct contractor: our technician arrives at your home within 60 minutes or repairs it at our service center. Diagnostics are free, with a 1-year warranty on labor and parts, and technicians have 4 to 20 years of experience. The technician provides the price after diagnostics.
Ava kettles fail in several recurring scenarios—from heating failure to leaks along the body seam. Let's break down what's behind each symptom and what to check first.
Most often the contact group in the base or a break in the heating element circuit is to blame, less often the power button; we check the entire circuit with a multimeter before replacing components. The base contacts oxidize from moisture and regular spills, and the spring-loaded prongs lose their tension over time and stop reaching the pads on the bottom of the jug. The power button breaks less often: its latch wears out and it stops locking in the pressed position. The heating element usually fails last in this chain—the connections feeding it suffer first. Ava kettle repair in Almaty starts with checking the contact group and testing the circuit. The technician provides the work order and final price after free diagnostics. A Tech Service technician restores the base contacts when you report "won't turn on" and tests the circuit along its entire length, from the plug to the coil. If the indicator doesn't light up at all, start with the base contacts, not the heating element—this is the most common cause of a false "burnt heating element" diagnosis.
The thermostat and steam sensor are responsible for auto shut-off; if the device boils until dry, the thermostat has failed; if it clicks off after ten seconds, the steam sensor or bimetallic plate has tripped. The thermostat sits at the bottom of the jug and opens the circuit when the set temperature is reached, while the steam sensor detects the flow of hot air through the steam vent in the handle or lid. Boiling until completely dry means the thermostat is stuck in the closed position—then the device heats until all the water is gone. Early shut-off shows the opposite: the bimetallic plate trips at a lower temperature due to scale on the bottom or a misadjusted setting. Boiling until dry is dangerous not only for the kettle but also for the wiring—if you notice this symptom, don't leave the device plugged in unattended until the technician arrives.
Leaks along the body seam and from under the lid are most often related to the sealing ring or a crack; plastic smell and electric shock are reasons to stop using it immediately and call a technician. The sealing ring keeps the lid and body watertight, and from constant contact with hot water it hardens, cracks, and stops fitting snugly. A crack along the seam appears from sudden temperature changes, such as pouring cold water into a hot jug, and the lid lock loosens over time and stops holding the seal. The plastic smell comes from burnt wiring or a melted contact block inside the base, and the power cord at the plug frays from frequent wrapping around the body. Electric shock when touching it almost always indicates insulation failure or water reaching the contacts—this is not a fault to check on your own.
Ava kettles don't have a single display with codes, but the indicator behavior and the nature of the clicks themselves hint at which component to check first.
A blinking indicator on Ava electronic models usually signals a fault in the control board or sensor, while a completely dark light points to a power issue or problems with the base contacts. The board controls both heating and indication, so blinking often comes with heating surges: the element turns on and off. A dark light with a working outlet more often indicates a burnt contact group on the base or a break in the cord — the technician checks these first, even before opening the case. On mechanical models, the indicator light is directly connected to the switch, so its behavior is easier to read. This sign helps narrow down the check without opening the device. In our practice, unstable blinking without heating surges is more often caused by oxidized contacts than by a board failure: cleaning the terminals gets the device working again without replacing electronics. If you are interested in Ava kettle repair price, the technician quotes it after free diagnostics.
| Symptom | Likely cause | What the technician checks |
|---|---|---|
| Does not turn on, no light | Base contacts, switch, cord | Power circuit and contact group |
| Does not heat, but indicator is on | Heating element or heating disc | Resistance of the heating element |
| Boils and does not turn off | Thermostat, bimetallic plate | Auto-off test when boiling |
| Turns off before boiling | Steam sensor, steam vent | Steam sensor activation |
| Indicator blinks | Control board, sensor | Board and indication circuit |
| Leaks at the seam or under the lid | Sealing ring, crack | Seal of the body and seam |
An Ava kettle can be repaired right at the customer's place or in the service center — the choice depends on which part has failed. Let's go through both scenarios and the work order.
At home, we replace the heating element, thermostat, steam sensor, base contacts, and sealing rings — these jobs don't require stationary equipment, and a specialist arrives within 60 minutes anywhere in the city. The on-site format covers most typical breakdowns: scale on the heater, worn thermostat, burnt contacts in the base connector, a leaking lid ring. The technician clarifies the model and symptom in advance to bring the right part, so replacing the heating element or steam sensor usually takes a single visit. Ava kettle repair in Almaty with on-site service is done right at the customer's place, and the reason Almaty residents order on-site repair is time savings: no need to take the device across town and then pick it up again. The customer sees exactly what is being replaced and doesn't part with the device for days — especially important if it's used daily.
The control board of an electronic model, soldering contacts, and complex case issues are better handled in the service center, where the result can be tested under load. Ava electronics include a microcontroller, triac or relay, temperature sensor, and power circuits; if water gets in or there's a voltage spike, traces burn out, and a visual inspection isn't enough. In the service center, a specialist checks the circuit, tests the control element, and tests the assembled device by actually boiling water, not just with a multimeter. The board isn't always replaced entirely — often it's enough to restore traces or replace a single component, and the decision is made after diagnostics, not in advance. This approach saves the customer money: replacing the whole unit is only justified if the board is burnt with damage to multiple circuits.
Diagnostics and warranty are what appliance owners check before even calling a service center. Let's look at how both stages work, how transparent they are, and how payment is handled.
Diagnostics are free: the technician checks the heating element's resistance, the power circuit, thermostat and steam sensor response, and the body seals, and only then names the cause. A multimeter shows if the heating element is broken or shorted, a separate test confirms that auto shut-off at boiling triggers at the right temperature, and inspecting gaskets and joints reveals leaks. By combining these measurements, Tech Service can tell a burned-out heating element from a stuck thermostat or a simple loose contact in the terminal block. The technician gives the repair price for an Ava kettle only after the inspection—the diagnostics themselves are free. Free diagnostics only make sense when they end with a specific diagnosis and price, not a vague "needs replacing"—that's why we go over every checked component and explain which part needs replacement and which still has life left in it.
We provide a 1-year warranty on labor and parts—that covers both the replaced heating element or thermostat and the quality of the replacement itself. This means if the same component fails again within the warranty period, you don't pay twice: the faulty part is replaced under warranty, and the technician rechecks the entire power circuit, not just the burned-out element. A warranty on a part and on labor are not the same thing: if a part fails, both its condition and correct installation matter, so both are covered by the same term. And the coverage applies to both at-home and in-service work—where the repair is done doesn't affect the term. In my view, it's this combination of "part plus installation" that covers the main risk of a repeat breakdown.
Our technicians have between 4 and 20 years of experience, and you can pay in any convenient way—via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. The range of experience in the team is no accident: complex cases involving the control board go to a technician who has dealt with that fault before, while routine replacements of the heating element or thermostat are handled by any of our mobile technicians. This approach saves the owner time: you don't have to wait for a narrow specialist for a standard procedure, and an unusual fault is still handled by someone who has seen it many times. The technician gives the price for restoring an Ava kettle after free diagnostics. Our mobile technician comes to your home anywhere in the city, so inspection and measurements are done in your kitchen, without transporting the appliance.
There are no prices in this article—the final amount depends on the component and the nature of the fault. Let's break down what goes into the estimate, what types of work there are, and when restoration is worthwhile.
The cost of repairing an Ava kettle depends on which component has failed, whether a part needs replacing, and how difficult it is to access; the technician provides the price after free diagnostics. The heating element, control board, and thermostat fall into different price categories: soldering the base contacts versus replacing the entire unit are jobs of different scope. The layout also matters—models with a concealed disc take longer to disassemble than those with an exposed coil. We don't quote a price over the phone: without opening the casing, you can't tell a burnt-out heating element from oxidized terminals, and therefore can't estimate the scope of work. Replacing the heating element and replacing the control board are jobs of different complexity, so relying on an "average price" from ads is pointless: it doesn't account for the specific Ava model.
| Work | Where performed | What we check afterward |
|---|---|---|
| Replacing the heating element or disc | On-site or at the service center | Heating and element resistance |
| Replacing the thermostat | On-site or at the service center | Auto shut-off when boiling |
| Replacing the steam sensor | On-site or at the service center | No early shut-off |
| Repairing the control board | At the service center | Heating and indicators under load |
| Replacing the sealing ring | On-site or at the service center | Lid and seam tightness |
| Descaling | On-site or at the service center | Even heating |
Repair makes sense when a single component fails while the body is intact and the electronics work; if the seam of a glass body is damaged or both the board and heating are faulty, replacing the appliance may be the smarter choice. How much an Ava kettle costs in each case is a matter for diagnostics: with an intact body and a working heating element, a targeted fix is usually enough, while a combination of two serious faults makes repair more expensive. Repairability also depends on the body: glass models have seams that are harder to restore than metal ones, and a crack in the glass often means the part isn't worth replacing. The decision should be made after diagnostics, not based on the symptom: what looks like a "burnt-out heating element" sometimes turns out to be a simple replacement of the base contacts. We work as a direct contractor, not an aggregator, so the technician assesses the component and explains what's more cost-effective—repair or replace the appliance.
The symptoms of an Ava kettle follow a simple logic: what exactly isn't working—heating, shut-off, or water delivery—points to the component to check.
32brands
We repair Ava kettles and appliances from other brands that have dedicated pages on the site.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
Washing machine error codes are self-diagnostic codes that point to a specific component: drain, water fill, heating, motor, or door lock.
29 January 2026 · 13 minutes read












