experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 13 16Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
Technician arrives within 60 minutes anywhere in the city. Free diagnostics.
Our own technicians4 to 20 years of experience




Repair prices
Below are typical symptoms and causes that help pinpoint the problem.
plug, button, thermal fuse
from4 000 ₸
winding overheating, insulation melting
from10 000 ₸
overload, thermal relay, motor
from5 500 ₸
bearing, blade mounting, imbalance
from4 000 ₸
seal, housing crack, attachment
from6 500 ₸
dull blade, plate, winding of strands
from3 500 ₸
contact, spring, wire
from4 000 ₸
clogged channel, worn blade, plate
from4 000 ₸
The table shows the starting labor cost without parts and the repair time for an Axion meat grinder; the technician will confirm the final amount with you before any work begins.
1–2 hourstime
from 3 000 ₸cost

BeforeAfter5 steps

Five steps from request to performance check.
Describe the symptom and model — the technician will prepare for the visit.
Technician arrives within 60 minutes anywhere in the city.
The technician agrees on the scope of work and price before starting the repair.
Work begins only after you agree to the scope and price.
The 1-year warranty on labor and parts applies, and the technician records it in the acceptance document.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Before the visit, ask the technician about part compatibility with your model and the estimated scope of work.

Warranty question? Call us
+7 (778) 021 13 167 898 reviews of repairs at TECH SERVICE in total
Айгерим Б.Order No. TS-2342 · 21 September 2025
oursДо этого обращался в другой сервис, там только развели руками. Сдал в ремант: мясорубка. Проблема — греется. Заявку приняли по телефону, перезвонили через десять минут. Мастер показал, что меняет: нож. Сказали 11 000, а потом ещё и скидку сделали. Не пожалел ни разу. Вернули в тот же день, всё функционирует
Жанна О.Order No. 245774 · 2 April 2023
oursБыло подозрение, что дело в плате, хотелось услышать второе мнение. Оставил заявку на ремонт мясорубки. Повод для визита: забивается. Дамир М помог выбрать, без навязывания. Проверил дома — всё на месте, ничего не забыли)
Дарья С.Order No. ZK-9022 · 22 June 2021
oursПовод для визита: забивается. Отдельно скажу про мастера: Дамир М — спокойный, без лишней суеты. Работает как раньше, придирок нет)
Алия Ш.Order No. 44419 · 9 March 2021
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. Повод для визита: не крутит. Сделали аккуратно, следов разборки не видно)
Талгат С.Order No. 649992 · 25 February 2021
oursЦена имела значение, но и горонтия тоже. Мастер показал, что меняет: нож. Внешне как новый, если не считать мелкой царапины.
Мадина Т.Order No. 37518 · 12 December 2016
oursЖалоба простая: не крутит. Дамир М всё объяснил и не пытался впарить лишнее. Сделали и забыл про проблему.
Эльвира Д.Order No. 2016-7756 · 14 November 2016
oursДолго откладывал ремонт, потом всё-таки собрался. Больше всего напрягало: грееться. Проверили при мне, показали, что всё держит.
Марат Ж.Order No. 2016-9864 · 1 September 2016
oursИскал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Сначала просто глючило, потом стало хуже: не крутит. Мастер приехал на дом, всё посмотрел при мне. В списке работ — редуктор. Ни копейки сверху, как и обещали. Буду советовать знакомым. Уже полгода — ни одного сбоя
Аяна Е.Order No. ZK-2016/676 · 8 June 2016
oursОтдельно скажу про мастера: Дамир М — спокойный, без лишней суеты. Приняли без очереди, оформили за пять минут. Проверил дома — всё на месте, ничего не забыли.
Жанар Т.Order No. 2016-9903 · 16 March 2016
oursХотел сначала вызвать мастера на дом, потом передумал. Приняли без предоплаты, это подкупило. Проверил дома — всё на месте, ничего не забыли!!
Didn’t find the answer? Message us on WhatsApp.
Ask a questionIn Almaty, our service center takes on Axion meat grinders: a technician comes to you or repairs the unit at our shop. Diagnostics are free, and the technician arrives within 60 minutes anywhere in the city.
If the motor hums but the auger won't turn and you smell something burning, the motor is likely damaged, while cracking and jerking point to the gearbox. A technician can tell for sure after disassembling and checking the windings, and it depends on the model.
Stringy meat overloads the drive, and the safety clutch or plastic gear starts to slip, so the auger turns unevenly. If the jerking doesn't stop, the part is already worn and needs a technician's inspection.
Usually only the worn plastic gear is replaced if the shaft and gearbox housing are intact. When the shaft or its seat is damaged, the gearbox is replaced as a unit, and free diagnostics will show what your case needs.
Cracking and a burning smell mean the motor is overloaded and a gear is breaking down; next the housing could melt or the wiring could short out. Turn off the meat grinder and don't plug it in again until a technician inspects it.
You can replace the gear yourself if you have experience disassembling a gearbox and the right part. Without experience, it's easy to damage the shaft or reassemble the unit misaligned, so it's safer to have a technician handle it.
Tech Service repairs Axion household electric meat grinders in Almaty: our technician comes to your home or takes the appliance to the service center. Diagnostics are free, with a 1-year warranty on labor and parts, and a technician can be at your door anywhere in the city within 60 minutes. The price is given after diagnostics.
Axion meat grinders are repairable, and parts for them are available. The more important question is who does the work — a direct contractor with an on-site technician or an intermediary who passes the request to a third party.
We service household electric Axion meat grinders of various years, including models with and without reverse. Reverse is a useful function, but the direction-switching unit is the one that most often needs attention when worn. We work on units with metal and plastic gearbox housings, with and without a safety clutch. The age of the equipment itself is not a verdict — what matters more is the condition of the gearbox and motor winding, which the free diagnostics reveal. The technician checks shaft play, gear condition, and winding integrity, then explains what can be restored. In my opinion, older models with metal internals often outlast their newer plastic counterparts — provided the gearbox hasn't been run dry. So before calling, don't dismiss the equipment as hopeless: first see what the inspection shows. We repair Axion meat grinders in Almaty with an on-site technician.
Tech Service is a direct contractor: our technician comes to you, not an intermediary who passes the request to a third party. This difference is visible from the start: the technician reaches your address within 60 minutes anywhere in the city and performs the free diagnostics himself, rather than collecting a request for another team. When working through an aggregator, responsibility for the result is blurred between the dispatcher and the technician, while with a direct contractor the 1-year warranty is tied to the person who did the work. Our experience ranges from 4 to 20 years among different specialists, and each one handles the unit from disassembly to test run. If the meat grinder malfunctions again after service, the same service will deal with it, not a call center that redirects your request. For the owner, this means one thing: one party responsible for the work and a clear address for claims.
Based on the symptom, the technician narrows down the components even before disassembly. Below are the most common complaints about Axion and what lies behind them.
If an Axion meat grinder hums but the auger doesn't rotate, the most likely culprits are a plastic gear in the gearbox or worn motor brushes. In such cases the motor is working and tries to turn the shaft, but the torque doesn't reach the auger due to broken teeth or worn graphite brushes. On models with a metal gearbox, the gear lasts longer, but if sinew or bone gets into the chamber, it can still strip. We start with free diagnostics: remove the gearbox, inspect the teeth and commutator, check the brushes for wear and remaining graphite length. Then we replace the damaged unit, lubricate the gearing, and run the unit under load. The warranty on labor and parts is 1 year, so it's important to fix the cause, not just the symptom. The sound of a running motor with a stationary auger is a signal to stop immediately: further switching on crushes the remaining gear and makes repair more expensive.
If your Axion meat grinder won't turn on, check the power button, the power cord, and the thermal fuse. If it shuts off after a couple of minutes, the overheating protection is kicking in. The button sticks after minced meat gets under it, the cord frays at the base, and the thermal fuse breaks the circuit when the motor is overloaded. The thermal relay sits in the winding and reacts to rising temperature when the chamber is clogged or during prolonged operation without pauses. A sign that the protection has tripped: the unit freezes after a few minutes under load and only comes back to life after it cools down. Restarting after the thermal fuse trips without fixing the cause of overheating leads to it failing again. So first find the source of heat—a clogged auger, thick mixture, worn brushes—and only then replace the protection. A technician arrives at your home in the city within 60 minutes and checks the power circuit on site.
| Symptom | Likely cause | What we check |
|---|---|---|
| Hums, auger doesn't turn | Plastic gear, brushes | Gearbox, motor |
| Won't turn on | Button, cord, thermal fuse | Power circuit |
| Shuts off after minutes | Thermal fuse, overload | Protection, load |
| Cracks and vibrates | Fasteners, housing, gear | Mounting of components |
| Burning smell | Winding, brushes, commutator | Motor |
Axion meat grinders have predictable weak spots, and understanding exactly where they fail helps both with maintenance and everyday use. Let's look at three components that break more often than others.
We replace the plastic gear in the gearbox of Axion meat grinders—this is the most common operation after overloading with stringy meat. The part sits in the gearbox between the motor and the auger and takes the shock when a tendon or an oversized piece gets into the chamber. The metal gear in this pair handles the load, while the plastic one gives way first: the teeth strip and the shaft starts spinning freely. In our Tech Service practice, most calls with the symptom "hums but doesn't turn" end with replacing this part. The plastic gear acts as a fuse: it breaks before the motor is damaged, so replacing it is noticeably easier than restoring the motor, where the winding and shaft bearings are replaced.
A repeat breakdown a week later usually means the cause of the overload wasn't fixed or the gearbox wasn't checked as a whole. Stringy meat creates shock loads on the gear and auger, and if the owner keeps loading the same portions, the new part takes the same hit. The second cause is vibration: when the auger mounting is worn, play appears, the housing starts to crack and tremble, and the teeth work at an angle. The third is thickened or worn-out gearbox grease: without it, the gear pair rubs dry and heats up. If the gearbox isn't greased and the auger mounting isn't checked when replacing the gear, the new part wears out faster. That's why we always inspect the assembly as a whole, not just replace the broken part.
The work follows clear steps: request, free diagnostics, approval, replacement of components, and a test run. Below is what happens at each step and when the technician gives you the price.
Diagnostics for an Axion meat grinder is free and done before any work is approved: the technician disassembles the unit and identifies the cause. On-site, they open the gearbox, inspect the gears, and check the electrical circuit with a multimeter—this rules out power interruptions and a faulty switch. Complex testing of the motor winding is done at the service center because it requires opening the housing and checking resistance across sections. The technician disassembles the unit in your presence: you see the removed parts and hear exactly what failed. After the inspection, you get a list of faults and the cost of work, and the decision is yours. In my view, transparent fault detection saves time for both sides—no disputes arise later.
After approval, we replace the gear, brushes, or thermal fuse, lubricate the gearbox, and reassemble the meat grinder. The plastic gear in the gearbox is the most stressed part, and when its teeth wear out, we replace the whole part rather than restoring the teeth. We replace worn motor brushes in pairs; otherwise, a new brush seats unevenly and the commutator starts to spark. We replace a blown thermal fuse only after finding the cause of overheating—otherwise the protection will trip again during the first use. We fill the gearbox with food-safe lubricant and distribute it throughout the cavity, not just on the teeth. During reassembly, it's important to align the auger and knife—misalignment causes vibration and accelerates wear on the new part. The technician tightens the fasteners in order and checks that the shaft rotates without play.
We finish the work with a test run under load and hand over the meat grinder with a 1-year warranty on labor and parts. The test run uses real product: we check how the gearbox handles the load, whether there's any unusual noise, and whether the housing overheats after replacement. Such a test shows whether the unit can handle operating conditions—it's better to catch any remaining issue here than during the first use at home. The technician also checks reverse and the smooth operation of the auger, then shows you how to reassemble the unit after cleaning. We accept Kaspi QR, Kaspi Red, card, cash or bank transfer and document warranty obligations for labor and installed parts. If the meat grinder was repaired on-site, the specialist leaves only after you've verified the appliance works.
Some meat grinder faults can be fixed right at home, while complex components require a stationary service center. Below we explain where typical work is performed, which parts are covered by the one-year term, and what to do if the appliance starts humming again.
| Work | At home | At the service center |
|---|---|---|
| Gear replacement | Yes | Yes |
| Brush replacement | Yes | Yes |
| Thermal fuse | Yes | Yes |
| Motor repair | No | Yes |
The 1-year warranty covers labor and the parts we installed. This term covers the plastic gearbox gear, motor brushes, and thermal fuse—the components that fail most often on Axion meat grinders. If the appliance starts humming again after service, the one-year term allows you to return it for repeat diagnostics without paying for labor again. In my view, what matters more is that the warranty establishes the technician's responsibility for a specific component, not for 'work in general.' So when you drop off the appliance, ask which parts and operations are covered by the one-year term—this makes things easier if you need to come back. Another practical point: keep a record of which component was replaced—it helps prove the link between a new fault and the previous work and avoid paying twice.
If the same problem happens again during the warranty period, we look into the cause and accept payment by Kaspi QR, Kaspi Red, card, cash or bank transfer after the work is agreed. A repeat call means the issue isn't just a worn part: the technician checks how the meat grinder was loaded, whether the motor overheated, and whether sinew or bone got into the gearbox. This check takes longer than a first-time gear replacement, but it shows why the unit starts humming again a week later. In our experience, a repeat warranty visit more often ends with adjusting how you use the appliance than with a second part replacement. The technician gives you the price after free diagnostics—no amounts are mentioned before that. Payment is made once you've approved the list of work and confirmed the grinder is working. A technician visit anywhere in the city takes 60 minutes, and the warranty remains valid after the first visit.
The symptoms, weak points, and repair steps we've covered lead to a few practical takeaways that help you decide on restoring the appliance without unnecessary costs.
38brands
Axion is our main focus. We also service other home appliance brands that have dedicated pages on the site.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
Washing machine error codes are self-diagnostic codes that point to a specific component: drain, water fill, heating, motor, or door lock.
29 January 2026 · 13 minutes read












