Open until 19:00+7 (778) 021 13 16Call a technician
Tech Service technician next to a microwave oven

Gorenje Microwave Oven Repair in Almaty

A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.

  • Arrival within 60 minutes anywhere in the city
  • Free diagnostics
  • 1-year warranty on labor and parts

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima

Repair prices

  • Diagnostics0 ₸
  • Backlight lamp replacementfrom2 000 ₸
  • Fuse replacementfrom2 500 ₸
  • Mica plate replacementfrom3 000 ₸
  • Tray motor replacementfrom3 500 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common Gorenje microwave faults in Almaty

Symptoms that Gorenje microwave owners most often report, and their likely causes.

PricesPricesTECH SERVICE03

How much Gorenje microwave repair costs in Almaty

The table shows how much microwave repair costs in Almaty for Gorenje models: the labor price "from" without parts and the timeframe; the technician confirms the final amount before starting the repair.

Backlight lamp replacementparts not included

1–2 hours

from2 000 ₸

Fuse replacementparts not included

1–2 hours

from2 500 ₸

Mica plate replacementexact price — after the free diagnostics

1–2 hours

from3 000 ₸

Tray motor replacementparts not included

1–2 days

from3 500 ₸

Grill heating element replacementparts not included

1–3 hours

from3 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Gorenje microwave repair in Almaty

Fan hums and oven overheats

1 visittime

from 4 000 ₸cost

Problem
In the Gorenje microwave, the fan inside hummed and barely turned, the body got very hot, and after a few minutes of operation the oven switched itself off.
What we did
The technician removed the casing, took out the fan assembly, installed a new motor, refitted the impeller, and checked the cooling and operation of the oven.
Result
The oven works without overheating or spontaneous shutdowns; cooling is restored.
I want the same
AVA microwave: fan hums and oven overheats — after repairBeforeAfter
01 / 04
All repairs
TECH SERVICE mobile technician with a tool case

How Gorenje microwave repair works at your home in Almaty

Five steps from request to checking the microwave's operation.

  1. Requestsame day as call

    Submit a request, describe the symptom and your Gorenje microwave model.

  2. Technician visitwithin 60 minutes

    The technician arrives within 60 minutes anywhere in the city.

  3. Time coordinationat a convenient hour

    The technician works around the owner's schedule and asks for access to a power outlet and space near the appliance.

  4. Repairafter approval

    Once approved, the technician performs the repair and replaces parts.

  5. Communication during workif found

    If another fault is found during disassembly, the technician will report it and discuss next steps.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Technician repairing a microwave oven at a customer’s home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book Gorenje microwave repair in Almaty

Describe the fault and a convenient time — the technician will arrive within 60 minutes anywhere in the city. Diagnostics are free, with a 1-year warranty on labor and parts.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 021 13 16
Customer reviewsReviewsTECH SERVICE06

Reviews of Gorenje microwave repair in Almaty

Татьяна Б.Order No. 2020-7052 · 14 October 2020

ours

Друг посоветовал, у него похожая история была. Проблема — не греет. С тех пор ни разу не подвёл!!

Repair: microwave

Владимир Н.Order No. 65903 · 21 June 2020

ours

До этого обращался в другой сервис, там только развели руками. Настроение было испорчено конкретно. Симптом был очевидный: не крутится тарелка. Радик Т всё объяснил и не пытался впарить лишнее. В списке работ — двигатель. Запчасть была в наличии, доплачивать не пришлось. Мастер посмотрел, сказал, что возьмётся, и взялся. Работает как раньше, придирок нет.

Repair: microwave

Айгерим Б.Order No. TS-2010-912 · 28 January 2020

ours

Хотел сначала вызвать мастера на дом, потом передумал. Симптом был очевидный: не греет. Отдельно спасибо мастеру — Дамир М, терпения ему хватило. Проверили при мне, показали, что всё держит.

Repair: microwave

Дамир И.Order No. 250505 · 16 October 2019

ours

Смотрел, у кого есть запчасти на такую модель. Повод для визита: не крутится тарелка. Вернули в тот же день, всё функционирует.

Repair: microwave

Руслан Д.Order No. TS-1826 · 17 September 2019

ours

Пробовал найти мастера в своём районе, но все были заняты. Основная жалоба — искрит. В тех сервис привёл знакомый, у него тут чинили ноут. Ребёнок уже проверил на прочность, держится.

Repair: microwave

Полина В.Order No. 61503 · 21 November 2018

ours

Искал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Повод для визита: не крутится тарелка. Второй месяц — полёт нормальный.

Repair: microwave

Алия Ш.Order No. ZK-3315 · 13 October 2017

ours

Нужен был счёт и чек, у нас техника на балансе организации. Привёз на диагностику: микроволновая печь. С чем пришёл: искрит. Приняли без очереди, оформили за пять минут. Цену обсудили до начала, сюрпризов не было. Вернули в тот же день, всё функционирует.

Repair: microwave

Алия Ш.Order No. TS-8157 · 9 September 2016

ours

Искал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Первое, что заметил: искрит. Проверили при мне, показали, что всё держит.

Repair: microwave

Сергей Р.Order No. TS-1602-689 · 15 April 2016

ours

Құрылғы ескі болғандықтан, бөлшек табыла ма деп қорықтым. Асығыс болмасам да, бір күнде бітіретінін айтты. Асыққан адамға ыңғайлы.

Repair: microwave

Алексей Г.Order No. 35582 · 16 January 2016

ours

Позвонил знакомому, он раньше работал в сервисе, посоветовал этих. Проблема — не греет. Tech-service оказался ближе всех, за это и выбрал. Сделали и забыл про проблему)

Repair: microwave
See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about Gorenje microwave repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Can the magnetron in a Gorenje microwave be repaired, or is it only replaced?

The magnetron in a Gorenje microwave is usually not repairable and is replaced as a whole, since it's a sealed unit. In rare cases, the technician checks it along with the high-voltage section to confirm the exact cause.

The Gorenje microwave turns on and the light works, but the food doesn't heat up—what's broken?

Most often the issue is in the high-voltage section: the magnetron, transformer, capacitor, or diode, as well as the door microswitches. The exact component will be identified by the technician during free diagnostics, and it depends on the model.

How does repairing an inverter Gorenje microwave differ from a regular one?

In inverter Gorenje models, heating is controlled by an electronic inverter board instead of a transformer, so diagnostics are different. Such repairs require checking the board and preparing the technician for the specific model.

Is it dangerous to use a Gorenje microwave if it sparks or doesn't heat?

You shouldn't continue using such a Gorenje microwave: sparking can damage the cavity and lead to a fire, and a faulty door can cause radiation leakage. It's better to unplug the appliance and call a technician.

What should I do if the Gorenje microwave stops heating again after repair?

Contact the service center that performed the repair: there is a 1-year warranty on labor and parts. The technician will recheck the high-voltage section and find the cause of the recurring issue.

The touch panel on my Gorenje microwave isn't responding—can it be repaired or does the board need replacing?

Most often, the Gorenje touch panel can be repaired by replacing the ribbon cable, contacts, or the control board itself. The decision depends on the model and the condition of the unit, and it's made by the technician after diagnostics.

Repair guideArticleTECH SERVICE08

Gorenje Microwave Repair in Almaty with a Technician Visit

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs Gorenje microwaves in Almaty: a technician arrives at your home within 60 minutes or takes the appliance to the service center. Diagnostics are free, there is a 1-year warranty on labor and parts, and the technician quotes the price after diagnostics. We repair solo, grill, built-in, and inverter models, including touch panels.

Why Your Gorenje Microwave Won't Heat and What Other Common Breakdowns Mean

Most Gorenje service calls involve four symptoms: the appliance won't heat, sparks inside, won't turn on, or won't rotate the turntable. Let's look at what's behind each and why you shouldn't put off diagnostics.

The Microwave Turns On, the Light Is On, but It Won't Heat

Most often, the magnetron or the high-voltage circuit is to blame, and during diagnostics we check those first. The magnetron generates microwaves for heating, and power is supplied to it by the high-voltage transformer and high-voltage capacitor—a failure in any link of this chain gives you a cold chamber while the light and fan are working. The control board in this scheme only sends turn-on commands, so its being functional doesn't mean the appliance will heat. During free diagnostics, our technician tests the transformer, capacitor, and magnetron one by one to find the specific component rather than replacing everything. If the turntable spins and the fan runs but the food stays cold, the control board is almost never the issue—don't rush to replace an expensive module. If you need Gorenje microwave repair in Almaty, the technician comes to your home and finds the cause on the spot.

Gorenje Microwave Sparks Inside

Sparking is almost always related to the mica plate, a dirty waveguide, or a damaged door seal. The mica plate covers the waveguide and protects it from splashes and grease—over time it burns through and starts sparking every time you turn the microwave on. The second source is burnt residue inside the chamber and on the rack: metal and grease particles act as tiny conductors. The third is the door seal: cracks and tears break the fit and open a path for microwave leakage. During inspection, the technician removes the plate, checks the waveguide for burn marks, and assesses the seal around the entire perimeter. You shouldn't use the appliance until the cause is fixed—sparks burn through the chamber wall and create a risk of microwave leakage, and replacing the mica plate and cleaning the waveguide cost less than restoring a burnt chamber.

It Won't Turn On, the Turntable Won't Spin, Defrost Won't Work

  • High-voltage fuse: protects the high-voltage circuit from overload and is the first to fail during a power surge.
  • Door latch and microswitches: block startup if the door isn't closed tightly, and their burnt contacts can make the oven completely unresponsive.
  • Turntable motor: rotates the plate through a gearbox, and if it jams or the winding breaks, food stays in one place without mixing.
  • Control board: handles the timer, modes, and defrost, and its failure shows up as no response to buttons when power is fine.
  • Power circuit: checked first when there are no signs of life at all, including the power cord and noise filter.
  • Check order: we go from the fuse and interlocks to the motor and only then to the electronics—this makes diagnostics faster and cheaper for the owner.

Error Codes on the Gorenje Display and What They Mean

The display shows a code of letters and numbers, not text—it can help narrow down the search area. Let's look at how to read these signals and when you can't do without a technician.

How to Read an Error Code on the Display

The code on the display points to a component, not a specific part, so decoding narrows the check but doesn't replace diagnostics. A combination like E-1 or E-4 on Gorenje is tied to the chain "control board—touch panel—high-voltage module": the board controls modes and the timer, and the panel sends commands to it, so a failure in any link gives similar indications. The same combination appears both with a broken ribbon cable and with a leak in the high-voltage section—from the outside they look the same. We recommend writing down what happened before the signal appeared: was the appliance turned on after a long period of disuse, was there a power surge, at what mode did it stop. Note the combination and the circumstances in which it occurred—this speeds up finding the cause and helps the technician avoid checking everything from scratch.

What to Do After a Code Appears

  • Note the signal: take a photo of the display and note the mode the appliance stopped in.
  • Unplug the appliance: pull the plug from the outlet so repeated starts don't stress the high-voltage circuit.
  • Don't open the casing: high voltage builds up inside and is dangerous even after unplugging.
  • Describe the conditions: tell the technician whether there was a power surge or the appliance sat idle before the failure.
  • Wait for diagnostics: free diagnostics at Tech Service will show which component is sending the signal before any work begins.
  • Check the warranty: we provide a 1-year warranty on labor and parts, so it's best not to replace parts yourself.

When the code points to a major component

Some codes relate to the high-voltage section and, after a power surge, point to the transformer, capacitor, or magnetron. The high-voltage transformer powers the magnetron, and the capacitor stores a charge—during a grid surge, breakdown most often travels along this chain rather than the panel. A fault here doesn't show up immediately: the appliance may turn on, spin the turntable, and even hum, but not heat. An experienced technician distinguishes this signal from a board error by startup behavior and noise character. If the signal appeared right after a grid surge, testing starts with the power supply, not the panel—otherwise you might replace a working module and still not fix the cause. That's why, before replacing any component, the technician tests the entire power chain and cross-checks the result against the recorded code.

How a technician finds the cause and tells a magnetron failure from a board issue

The same symptom—'not heating'—can come from the magnetron, transformer, or control board. Here's how a technician traces the circuit and reaches a conclusion without randomly taking the whole appliance apart.

High-voltage section testing logic

  • High-voltage fuse: we check it first—a blown fuse often masks another fault in the circuit and shows where to look next.
  • High-voltage transformer: we measure the windings for opens and shorts, because without a working transformer the magnetron won't get power.
  • High-voltage capacitor: we check capacitance and test for breakdown, since a shorted capacitor disrupts wave generation.
  • Magnetron: we test the filament and integrity, because this is the component that turns electricity into heating radiation.
  • Circuit in order: the technician works from the fuse to the magnetron, locates the fault before replacing parts, and doesn't swap components at random.
  • Replacement practice: rebuilding the emitter inside the component doesn't give stable results, so we recommend replacing the part rather than restoring it.

How to tell a board failure from a magnetron failure

If there's heating but modes or the timer don't work properly, the control board is at fault; if the oven responds but doesn't heat, it's the high-voltage section. The control board handles modes and the timer: faults here show up as reset time, spontaneous starts, or an unresponsive touch panel while heating still works. The magnetron and its circuit have a different signature—the oven hums, the turntable spins, the light is on, but the food stays cold. In this case, the transformer and capacitor are checked along with the emitter, because the symptom is the same but the culprit varies. The touch panel adds a third scenario: it may not respond to touches while heating works perfectly, and then the technician looks at the ribbon cable and control contacts, not the high-voltage section. Sorting by oven behavior saves time: you don't need to disassemble the whole appliance to figure out where to look for the cause.

Repair or buy new after a major breakdown

The decision depends on the component: replacing the magnetron or control board is usually worth it, but if several expensive parts fail at once, the technician will honestly tell you during diagnostics. We look at the high-voltage circuit as a whole: if both the capacitor and transformer are blown, and then the magnetron also needs replacement, the total scope of work grows and it makes more sense for the owner to consider buying a new oven. When only one component is replaced—the board or the emitter—the appliance keeps the life of its body, door, and waveguide, and repair remains a cost-effective solution. The technician gives the price after free diagnostics, so you compare options with a clear picture rather than blindly. Our diagnostics are free, and there is a 1-year warranty on labor and parts—keep that in mind when choosing between repair and replacement.

Repair of inverter, built-in, and touch-control Gorenje microwaves

Different Gorenje types are built differently, and the repair approach varies. Below we compare the main categories in a table and separately cover the touch module and on-site work.

How Gorenje microwave types differ in repair

Gorenje typeWhat we check firstRepair feature
SoloMagnetron, high-voltage circuitBasic design, easy access
With grillGrill element, magnetronTwo heating components
Built-inMounting, access to componentsRequires careful removal
InverterInverter board, magnetronDifferent power principle
With touch controlsTouch module, boardInterface as a separate component

Touch panel not responding—repair or replace

We first check the touch module for contact and ribbon cable issues, and only suggest replacement if the element itself is damaged. A "dead" control often results from oxidized traces or a worn ribbon cable rather than a failed sensor—the module is removed, contacts cleaned, and the cable tested for breaks. The control board usually remains functional, so there is no point in replacing it. If the sensitive layer is blown or the module fails the test, we install a new one and check response across all zones. Diagnostics at Tech Service are free, and the warranty on labor and parts is 1 year. Before calling a technician, wipe the surface dry—moisture and grease cause false presses and mask the real fault. If response does not return after wiping, the issue is not just dirt: the technician will check the ribbon cable, contacts, and the touch layer one by one.

Built-in and inverter models on-site

We repair built-in and inverter Gorenje microwaves on-site or at the service center if disassembly is needed to access components. The inverter circuit adjusts magnetron power smoothly, so checks start with the inverter board rather than the high-voltage circuit as in solo models. A built-in oven must be carefully removed from its niche to avoid damaging furniture and fasteners—this is part of the technician's job. On-site visits within the city take up to 60 minutes, diagnostics are free, and we accept payment by Kaspi QR, Kaspi Red, card, cash or bank transfer. The technician determines whether the oven can be fixed on-site or needs to be taken to the service center. If you provide the model and type in advance—built-in, inverter, or with grill—the technician will know immediately what access to components is required.

How the repair works and what the warranty covers

Here is the workflow from request to warranty, so you understand what you are paying for and when you make decisions.

Workflow from request to repair

  • Arrival within 60 minutes: a technician reaches any part of the city within an hour after the request is confirmed.
  • Free diagnostics: we check component by component and find the cause instead of replacing parts at random.
  • Scope approval: we explain the cause and list the operations before work begins, and the owner decides whether to proceed.
  • Repair at home: if the fault is accessible, the microwave is fixed right at the customer's place.
  • Repair at the service center: the appliance can be taken to the service center if the components can't be reached at home.
  • Result check: after the work, we turn the appliance on and check the heating.
  • Warranty: the work performed and the parts installed are covered by a 1-year warranty.

What the 1-year warranty covers

We provide a 1-year warranty on labor and parts, so both the work and the installed part are equally protected. This means the same term — one year — applies to the work performed and to the installed part. The warranty covers the magnetron, the control board, and the touch panel if those were the parts replaced during the repair. The warranty applies to both the technician's work and the installed part, so if a replaced component fails, you won't have to prove separately whether the cause is the part itself or its installation. The warranty on parts works the same as on labor — one year for the installed component. Therefore, when handing over the appliance, ask which components are covered by the warranty and note this on the receipt — this keeps the scope of work clear and makes it easier to confirm what is eligible for free repair if you need to come back.

Who comes and how to pay

Our technician has 4 to 20 years of experience, and you can pay for the work in any convenient way — via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. Tech Service is the direct contractor: the technician comes to your home or takes the appliance to the service center. Diagnostics are free, and the cost of repairing Gorenje microwaves is quoted based on the results, once the cause is known. The technician gives the final amount before work starts, so the owner can decide with the full picture. This procedure is convenient for appliance owners anywhere in the city: technician arrival takes up to 60 minutes. If the appliance is large or built-in, please mention this when you call — the specialist will plan the visit taking into account access to the installation site.

Gorenje microwave oven repair essentials

We've covered what determines the outcome of a Gorenje microwave repair: from correctly interpreting the symptom to choosing between repair and replacement of a component. Below is a brief summary to keep in mind when contacting a technician.

  • "Not heating" symptom: more often points to the magnetron or high-voltage circuit rather than the control board, so checks start with the high-voltage section.
  • Display code: narrows the check to a specific component but does not replace measuring part parameters under load.
  • Sparking oven: must not be turned on until the cause is fixed — risk of microwave leakage through a damaged waveguide or dirty mica plate.
  • Model type: inverter, built-in, or touch assembly determines access to components, the tool set, and the approach to disassembling the casing.
  • Transparent process: a clear sequence of work and a warranty on labor and parts remove concerns about unnecessary services.

40brands

Besides Gorenje, we repair other microwave brands in Almaty

The service center handles appliances from various brands. Choose a brand on the site to go to its page.

We also repairWe also repairTECH SERVICE09

Besides Gorenje microwave repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before Gorenje microwave repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp