Open until 19:00+7 (778) 021 13 16Call a technician
Tech Service technician next to a juicer

Artel Juicer Repair in Almaty

A technician arrives within 60 minutes anywhere in the city. Diagnostics are free.

  • 1-year warranty on labor and parts
  • 4 to 20 years of experience

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima

Repair prices

  • Diagnostics0 ₸
  • Bearing replacementfrom3 000 ₸
  • Motor replacementfrom4 000 ₸
  • Power circuit repairfrom4 500 ₸
  • Leak repair (seal replacement)from5 500 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common Artel juicer faults in Almaty

Below are the frequent symptoms Artel juicer owners report. The cause is identified after free diagnostics.

PricesPricesTECH SERVICE03

How much Artel juicer repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Bearing replacementparts not included

1–2 days

from3 000 ₸

Motor replacementparts not included

1–2 days

from4 000 ₸

Power circuit repairexact price — after the free diagnostics

1–3 hours

from4 500 ₸

Leak repair (seal replacement)parts not included

1–3 hours

from5 500 ₸

Motor brush replacementparts not included

1–2 days

from6 000 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Artel juicer repair in Almaty

Juice leaking from under the basket onto the motor

1–2 hourstime

from 5 500 ₸cost

Problem
The Artel juicer was leaking juice from under the basket onto the motor — the shaft oil seal had worn out.
What we did
The technician replaced the shaft oil seal and checked the juicer's operation.
Result
The leak is fixed, juice no longer gets onto the motor, and operation has been checked.
I want the same
On the workshop bench, a juicer motor unit without the bowl: a technician is fitting a new oil seal onto the shaft in its seat, and the old oil seal lies on the housing.BeforeAfter
01 / 03
All repairs
TECH SERVICE mobile technician with a tool case

How Artel juicer repair works at your home in Almaty

Five steps from request to checking the juicer's operation.

  1. Requestsame day

    Describe the symptom and model — the technician will prepare tools and parts.

  2. Technician visitwithin 60 minutes

    A technician arrives within 60 minutes anywhere in the city.

  3. Diagnosticsfree

    Free on-site diagnostics; the inspection results are recorded in the request.

  4. Approvalbefore repair

    We confirm the agreed scope of work before starting the repair.

  5. Checkafter repair

    The technician explains how to operate the unit after reassembly.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Mobile technician fixing a washing machine at the customer's home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book Artel juicer repair in Almaty

Leave a request — a technician will arrive within 60 minutes anywhere in the city. Describe the symptom and juicer model so the technician brings the right tools.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 021 13 16
Customer reviewsReviewsTECH SERVICE06

Reviews of Artel juicer repair in Almaty

Азамат Е.Order No. ZK-1265 · 14 December 2024

ours

Смотрел, у кого есть запчасти на такую модель. Уже не верил, что это можно починить. Повод для визита: течёт. Могли бы взять больше, но взяли по-божески. Вернули в тот же день, всё функционирует

Repair: juicer repair in

Нурасыл М.Order No. ZK-4936 · 25 October 2024

ours

Работаю допоздна, поэтому нужен был сервис с нормальным графиком. Сначала сомневался, мало ли что. Проблема — вибрирует. Работает как раньше, придирок нет.

Repair: juicer repair in

Наталья С.Order No. ZK-6447 · 11 February 2023

ours

Поломка застала перед командировкой, тянуть было нельзя. Жалоба простая: не крутит. Починили и дали гарантию на месяц)

Repair: juicer repair in

Роман З.Order No. 377950 · 24 January 2023

ours

Выбирал по отзывам в 2ГИС, времени на эксперименты не было. Повод для визита: вибрирует. Проверили при мне, показали, что всё держит.

Repair: juicer repair in

Дмитрий Л.Order No. TS-8112 · 29 April 2022

ours

Работаю допоздна, поэтому нужен был сервис с нормальным графиком. Техника работала годами, а тут — течёт. Радик Т не стал навязывать дорогую запчасть, поставил нормальную. Сделали аккуратно, следов разборки не видно

Repair: juicer repair in

Куаныш Б.Order No. 2019-5119 · 7 January 2019

ours

Мастер үйге келіп, орнында тексерді. Диагностика тегін болды, бұл жағы жақсы. Ұсынамын, текке ақша алмайды

Repair: juicer repair in

Татьяна Б.Order No. 751641 · 18 July 2018

ours

Техниканы жөндеуге алып келу үшін арнайы уақыт бөлдім. Таңертең жұмыс істеп тұрды, кешке қарай үнсіз қалды. Ұсақ ақауларды да тегін жөндеп берді. Диагностика тегін болды, бұл жағы жақсы. Тексеру кезінде бәрін өзі көрсетті. Бағасы базардағыдан қымбат емес. Алдын ала айтқан уақыттан ерте бітірді. Бағасын алдын ала келістік, соңында өзгерген жоқ. Мастер кешке дейін күтпей, сол күні аяқтады. Енді басқа жерге бармаймын)

Repair: juicer repair in

Ляззат К.Order No. ZK-6986 · 24 September 2017

ours

Выбирал по отзывам в 2ГИС, времени на эксперименты не было. Проверил дома — всё на месте, ничего не забыли.

Repair: juicer repair in

Нурасыл М.Order No. 586294 · 24 May 2016

ours

Повод для визита: не крутит. Радик Т приехал в тот же день, хотя был конец смены. Проверил дома — всё на месте, ничего не забыли.

Repair: juicer repair in

Андрей П.Order No. 114425 · 13 February 2016

ours

Үйдегілер «лақтыр» деді, мен шешім қабылдамай тұрып көрсетуге апардым. Кепілдік мерзімі біткен соң бұзылды, әрине. Келесіде де осында келемін.

Repair: juicer repair in
See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about Artel juicer repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
What does the error code on the Artel juicer display mean?

Each Artel model has its own code table, so the interpretation depends on the model and is listed in the manual. The technician matches the code with the symptoms and checks the relevant component — the motor, control board, or sensor.

Why does the Artel juicer hum but the disc doesn't spin?

Most often the culprit is the motor, belt, or a seized shaft bearing — there's sound but no rotation. The technician pinpoints the exact cause during free diagnostics by taking apart the drive assembly.

The Artel juicer leaks from the bottom — is it a gasket or a crack in the housing?

Usually worn seals and gaskets are to blame, less often a crack in the housing or bowl. The technician checks both possibilities: seals are replaced, and for the housing they decide whether to repair it or replace the part.

Can an Artel juicer be repaired at home in Almaty?

Yes, the technician fixes most breakdowns on-site: replaces the cord, buttons, seals, bearings. If complex disassembly of the motor or board is needed, the appliance is taken to the service center.

Is there a warranty on Artel juicer repair and for how long?

Yes, we provide a 1-year warranty on labor and parts. The terms apply if the operating rules explained by the technician after repair are followed.

What should I do if the Artel juicer vibrates heavily during spinning?

Check that the housing is level and the bowl isn't overloaded with food. If vibration persists, the cause is worn bearings or disc imbalance — the technician fixes this at your home.

Repair guideArticleTECH SERVICE08

Artel juicer repair in Almaty by a direct technician

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs Artel juicers in Almaty: a technician arrives at your home within 60 minutes or takes the appliance to the service center. Diagnostics are free, we provide a 1-year warranty on labor and parts, and our technicians have 4 to 20 years of experience. We quote the price after diagnostics and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies.

Why Artel juicers break down and what we check first

Artel juicers fail for a few typical reasons, and the technician can already tell from the symptom during diagnostics where to look. Here's what breaks most often and how to extend the life of your appliance.

What causes Artel juicers to fail

Most often, an Artel juicer fails due to overload during spinning, natural wear of the disc and bearings, and hard particles getting into the mechanism. The electric motor drives the disc or auger through a transmission unit, and any impact load is transferred along this entire chain. The grating disc loses its tooth geometry over time, the bearings develop play, and pits and ice cubes strike the mounting assembly. The safety clutch is designed for normal torque and doesn't always slip during a sudden jerk. If you load the product in bursts and above the mark, the motor and drive belt receive impact loads — a steady, portioned feed extends the service life of the components and reduces the risk of repeat visits to the workshop. When the appliance still needs attention, our technician handles Artel juicer repair in Almaty — at your home or in the service center.

What the technician checks first

  • Power cord and plug: they supply voltage to the motor and control board, so a break or burnt contact can mimic a complete breakdown.
  • Panel and control board: we check button response and trace integrity — an electronics failure produces the same symptoms as a jammed mechanism.
  • Motor without load: we listen for humming and see if the shaft turns, separating electrical from mechanical issues before disassembling the housing.
  • Drive and clutch: a stretched belt slips under load, and a triggered protection looks like motor failure.
  • Disc, auger, and bearings: shaft play and chipped teeth explain vibration, knocking, and incomplete extraction.

How to care for your Artel juicer to avoid service visits

  • Rinse the filter mesh right after juicing: dried pulp clogs the cells and forces the motor to work under increased load.
  • Don't load product above the mark: a steady, portioned feed reduces impact load on the transmission unit and mounting points.
  • Lubricate the mechanism as scheduled: dry bearings and the auger shaft heat up and hum long before the unit jams.
  • Empty the pulp container on time: an overfilled container creates back pressure and hinders the discharge of mass from the chamber.

Symptoms and error codes that bring Artel juicers in

From the nature of the symptom, the technician already understands the likely cause during diagnostics. Below are the most common complaints about Artel juicers and what lies behind them.

Artel juicer won't turn on or hums but doesn't spin

If an Artel appliance won't turn on, the cause is more often in the power circuit or control panel, and when the device hums but the disc doesn't rotate — in the drive belt or a jammed shaft. The power cord and connector are checked for breaks and oxidized contacts, the control panel — for button response and trace integrity. The drive belt transfers rotation from the motor to the disc, and if it stretches or breaks, the motor runs idle. The safety clutch protects the shaft from overload and may slip during a sudden stop. Humming without rotation means the motor is running while the mechanism is stuck, and in this situation it's important not to keep the appliance on to avoid overheating the winding and causing motor replacement. The technician quotes the cost of Artel juicer repair after free diagnostics, once the cause is clear.

Error code on the display and burnt smell

An error code on the Artel juicer's display means the protection has tripped or the control board has failed, and the burnt smell usually comes from an overheated motor or scorched contacts. The control board handles the buttons and error indicators, so its traces and triacs are the first to suffer from voltage spikes. On models in the ART-JM-216 line and similar ones, the indicator lights up when the shaft is locked or overloaded, but the exact meaning depends on the board revision. A burnt smell doesn't always mean the motor needs replacing — sometimes it's enough to resolder a scorched contact and restore the insulation. The code should be checked against the model: on different Artel lines the same indicator can mean different things, so the technician looks at both the code and how the machine behaves under load.

Leaks, vibration and incomplete spin

SymptomLikely causeWhat the technician does
Leaks from the bottomGaskets, seals, cracked housingChecks joints and containers, replaces seals
Strong vibration and noiseWorn bearings, unbalanced discChecks the shaft and bearings, replaces them if worn
Doesn't extract juice fullyWorn disc or clogged filter meshAssesses the disc and rinses the mesh
Hums but doesn't spinDrive belt, seized shaftChecks the belt and shaft rotation

How the repair goes from request to warranty

From request to warranty, restoring an Artel juicer follows a few clear steps. Here's what happens after you get in touch and which format is more convenient for fixing your appliance.

Five steps from request to completed repair

  • Request: you describe the symptom — won't turn on, hums without spinning, leaks — and we note the Artel juicer model.
  • Arrival within 60 minutes: a specialist travels anywhere in the city and inspects the appliance on site, with no trips to the workshop.
  • Free diagnostics: during the inspection we check the motor, control board and seals without opening the housing without your consent.
  • Work approval: you learn which part is being replaced and why, and only then does the technician start disassembling and installing parts.
  • 1-year warranty: we return the fixed appliance with a warranty on labor and parts, including the part just installed.

Repair at home or at the service center

We restore Artel juicers both at home and at the workshop: a mobile specialist arrives within 60 minutes anywhere in the city, while complex cases are easier to handle at the service center. Most typical breakdowns are resolved at home — replacing seals, cleaning the mesh, checking contacts and knife mounts. The in-shop format is chosen when the motor needs replacing or the control board needs soldering: such parts require a stable workbench and careful disassembly of the housing. If the breakdown requires installing a new motor or soldering electronics, it's sometimes wiser to leave the appliance at the service center than to take it apart in the kitchen — the diagnostics will tell you. The mobile format saves time for Almaty residents, while the in-shop format gives more freedom when working with electronics and access to precise assembly of parts. The technician explains how much an Artel juicer repair costs after the free diagnostics — before any work begins.

Warranty and payment

  • 1-year warranty: covers both labor and installed parts — if the same part fails again, you return under the same warranty, not on new terms.
  • Payment methods: we accept cash and cards, you choose the format.
  • Price after diagnostics: the amount is given based on the free inspection, before work begins.
  • Transparent scope: the agreed list includes only the parts that actually need repair or a new part installed.

Auger and centrifugal Artel juicers: what breaks differently

Artel auger and centrifugal juicers are built differently, so they break down and are serviced differently too. Let's look at two failure scenarios and what the owner can check themselves.

How servicing differs between auger and centrifugal models

In an Artel centrifugal juicer, the disc, filter mesh, and drive belt wear out more often, while in an auger model, it's the auger, bearings, and shaft seals. The centrifugal juicer extracts juice through the rapid rotation of the disc and filter mesh: the grater shreds the pulp, centrifugal force throws it against the walls, and the belt transmits rotation from the motor. The auger works differently—slow rotation of the auger presses juice through the sieve, without sharp jerks or high speed. Because of the different loads, components fail differently: in centrifugal models, the belt and fine mesh suffer; in auger models, the gearbox and shaft bearings. In auger models, the motor runs at low speed with high torque, so overload hits the gearbox and bearings rather than the belt, as in centrifugal ones.

What the owner should check before calling a technician

  • Filter mesh: remove and rinse it—clogged holes cause incomplete extraction and extra load on the disc.
  • Juice container: check that it sits level and isn't overfilled—tilting and overflow can mimic a extraction failure.
  • Fill mark: don't pack products above the mark—overloading slows the disc and heats the motor.
  • Large pieces: cut hard fruits into smaller pieces—whole pieces hit the disc and speed up its wear.
  • Seals: inspect gaskets for leaks—a worn ring causes leakage past the housing, and after rinsing the mesh and checking the load, any remaining symptom points to the mechanics of the disc, auger, or bearings.

Which Artel models are brought to service most often

Among Artel models, centrifugal juicers, including the Artel ART-JM-216, come to service more often—they are more common in households and more frequently overloaded. Such devices extract juice through the rotation of the disc and filter mesh, and fast rotation wears out thin parts faster. Auger models are less common, but their breakdowns are more serious: replacing bearings and shaft seals requires disassembling the housing and gearbox. The model itself isn't problematic—the statistics reflect how the equipment is used: the more often hard products are juiced in bursts, the faster the disc and drive belt wear out. According to technicians' experience, careful loading with small pieces extends the disc's life more noticeably than any other technique.

How much repair costs and when it's better to buy a new one

The cost of restoring an Artel juicer depends on the breakdown, and the decision to repair or buy new depends on the nature of the fault and the age of the equipment. Let's look at both questions.

What makes up the cost of restoring an Artel juicer

The technician gives the price after free diagnostics—it depends on which component has failed and what parts are needed. The cost of repairing an Artel juicer consists of labor and parts, so the final amount is clear after inspection. We disassemble the device and check the motor, gearbox, drive belt, gaskets, and protection sensors: this inspection shows what needs replacing and what can be restored. Two things affect the total—the complexity of disassembling a specific model and the list of parts to replace: mesh, filter, auger, and electronic board cost differently. With a direct contractor, the amount doesn't include a middleman's markup, so it's closer to the actual work and parts rather than an aggregator's commission. Ask for a price range for your specific breakdown during diagnostics—that way you compare with the price of new equipment, not with a rough figure.

When restoration is justified and when it's easier to buy new

  • Drive belt: stretched or broken — replaced separately, other components remain functional, and the juicer keeps extracting juice.
  • Gaskets and seals: worn out and causing leaks at the joint — replacement restores tightness without major costs for other parts.
  • Disc and grater: worn or bent by pits — the part is replaced, while the motor and gearbox are not affected.
  • Bearings: hum and heat up during operation — pressing in new ones solves the problem as long as the shaft seat is not damaged.
  • Motor and housing: winding burned out or housing cracked — replacing the unit is often comparable to buying a new juicer.
  • Store warranty: if the appliance is still under the seller's warranty, check the terms there first — sometimes a warranty claim is more cost-effective than repair, and the technician will point this out during diagnostics.

Why a direct technician is better than an intermediary

Tech Service is a direct provider with its own technicians, not an aggregator: our technician comes to you, not an intermediary who passes the request to a third party. Our specialists have 4 to 20 years of experience, and there is a 1-year warranty on labor and parts. When the work is done by the person who approved it, responsibility for the result and warranty is not diluted between links — the client knows who to turn to if the problem recurs. Ask who exactly will come and who provides the warranty: in the chain of 'request accepted — passed to a contractor' there is no one to make a claim against. The technician quotes the cost of restoring an Artel juicer after free diagnostics, not over the phone at random — so the final amount matches the quoted sum. You can pay via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies, and a technician can be at your door within 60 minutes anywhere in the city, so the breakdown is resolved without a long wait.

Artel juicer repair key facts

A quick recap of what an Artel juicer owner should keep in mind before contacting a technician and after the appliance is back from service.

  • Common causes of breakdowns: overload, wear of the disc and bearings, hard particles getting into the mechanism — these three factors account for most requests.
  • The symptom points to the component: if the appliance won't turn on, hums without spinning, leaks, or vibrates, the search area narrows, but only diagnostics reveals the exact cause.
  • Different models — different breakdowns: Artel auger and centrifugal juicers fail in different ways, so the set of works differs too.
  • Repair or replace: for a local breakdown, restoration is justified, but for serious damage to the motor and housing, it's wiser to weigh buying a new appliance.
  • Cost and warranty: the price is quoted after free diagnostics, it depends on the breakdown and parts, and there is a one-year warranty on labor and parts.

34brands

Besides Artel, we repair other juicer brands in Almaty

We repair Artel juicers and other home appliance brands that have dedicated pages on our site.

We also repairWe also repairTECH SERVICE09

Besides Artel juicer repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before Artel juicer repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp