Open until 19:00+7 (775) 030 02 94Call a technician
Tech Service technician next to a cooktop

Lex Cooktop Repair in Almaty

Free diagnostics, a technician arrives within 60 minutes anywhere in the city. 1-year warranty on labor and parts.

  • 1-year warranty on labor and parts
  • Arrival within 60 minutes anywhere in the city
  • Technician experience from 4 to 20 years

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima

Repair prices

  • Diagnostics0 ₸
  • Panel unlockingfrom4 500 ₸
  • Mode switch replacementfrom5 000 ₸
  • Temperature sensor replacementfrom5 500 ₸
  • Wiring and terminal block repairfrom5 500 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common Lex cooktop faults in Almaty

Lex cooktop owners contact us with eight typical symptoms — from failure to turn on to cracks in the glass-ceramic surface.

PricesPricesTECH SERVICE03

How much Lex cooktop repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Panel unlockingexact price — after the free diagnostics

1–3 hours

from4 500 ₸

Mode switch replacementparts not included

1–2 hours

from5 000 ₸

Temperature sensor replacementparts not included

1–2 hours

from5 500 ₸

Wiring and terminal block repairparts not included

1–3 hours

from5 500 ₸

Relay and triac replacementparts not included

1–2 hours

from6 000 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Lex cooktop repair in Almaty

One burner does not heat

1 visittime

from 7 000 ₸cost

Problem
On the Lex cooktop, one burner stopped heating while the others worked.
What we did
The technician removed the panel from the countertop, took off the glass-ceramic surface, replaced the burner with the broken heating coil, and checked the resistance and heating of all zones.
Result
All burners of the Lex panel heat again; the technician checked the heating of each zone.
I want the same
Beko cooktop: one burner does not heat up — after repairBeforeAfter
01 / 03
All repairs
TECH SERVICE mobile technician with a tool case

How Lex cooktop repair works at your home in Almaty

Five steps from request to checking the cooktop after repair.

  1. Request1 day

    Describe the symptom and cooktop model so the technician brings the right tools.

  2. Technician visitwithin 60 minutes

    The technician arrives anywhere in the city and inspects the cooktop on site.

  3. Approvalbefore work

    The technician agrees on the scope of work and starts after your go-ahead.

  4. Part selectionby model

    The technician identifies the needed part by cooktop model and confirms the replacement.

  5. Post-repair checkright on site

    Turn on the cooktop together with the technician and make sure all burners work.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Technician repairing a cooktop at a customer’s home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book Lex cooktop repair in Almaty

Describe the cooktop malfunction and your preferred visit time: the technician will confirm the arrival, and a 1-year warranty covers labor and parts.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (775) 030 02 94
Customer reviewsReviewsTECH SERVICE06

Reviews of Lex cooktop repair in Almaty

Данияр С.Order No. 2026-1913 · 9 February 2026

ours

Позвонил знакомому, он раньше работал в сервисе, посоветовал этих. Была паника, если честно. Проблема — ошибка. Заявку приняли по телефону, перезвонили через десять минут. Нужна была замена: индукционная катушка. Вышло 22 500 тенге, дешевле, чем я рассчитывал. В тех сервис привёл знакомый, у него тут чинили ноут. Шум пропал, работает мягко)

Repair: stove

Асель Ж.Order No. TS-2404-216 · 17 April 2024

ours

Обратился по поводу варочной панели. С чем пришёл: не включается. Дамир М объяснил причину так, что понял даже я. Сказали 10 000, а потом ещё и скидку сделали. Поменяли: плата. Приняли без очереди, оформили за пять минут. Хороший сервис, побольше бы таких. Сказать, что доволен — ничего не сказать.

Repair: stove

Елена К.Order No. 56013 · 15 March 2022

ours

Утром работало, днём сломалось, вечером я уже искал сервис. Симптом был очевидный: ошибка. Радик Т возился с этим дольше, чем планировал, но довёл до конца. Назвали 26 500 сразу, в конце сумма не изменилась. Ребёнок уже проверил на прочность, держится.

Repair: stove

Нурасыл М.Order No. TS-7169 · 24 July 2020

ours

Техника на гарантии уже не была, так что выбор был свободный. Долго искал, кому это отдать, и вот нашёл. Симптом был очевидный: не греет зона. Нужна была замена: плата. Проверили при мне, показали, что всё держит.

Repair: stove

Сауле Н.Order No. 23570 · 14 March 2020

ours

Друг посоветовал, у него похожая история была. Не думал, что вообще напишу отзыв, но тут стоит. Первое, что заметил: не включается. Радик Т возился с этим дольше, чем планировал, но довёл до конца. Договорились на утро, к девяти уже был свободный мастер. Смета совпала с итогом, что редкость. В techservice попал случайно — и остался. Проверили на всех режимах, всё чётко.

Repair: stove

Андрей П.Order No. 2020-8988 · 6 March 2020

ours

Долго откладывал ремант, потом всё-таки собрался. С чем пришёл: не греет зона. Включил, проверил, работает.

Repair: stove

Тимур И.Order No. ZK-2019 · 27 February 2018

ours

Позвонил знакомому, он раньше работал в сервисе, посоветовал этих. Отдал мастеру: варочная панель. Проблема — не греет зона. Крутит ровно, без рывков.

Repair: stove

Светлана Д.Order No. ZK-6030 · 23 January 2018

ours

Цена имела значение, но и гарантия тоже. Проблема — не греет зона. Пользуюсь ежедневно, вопросов нет!!

Repair: stove

Ксения И.Order No. TS-1706-825 · 9 December 2017

ours

Основная жалоба — не включаеться. Дамир М снял деталь, показал износ, вопросов не осталось. Техсервис в Алматы, если что, вот их адрес — не пожалел. Второй месяц — полёт нормальный)

Repair: stove

Талгат С.Order No. ZK-4909 · 28 July 2017

ours

Техника на гарантии уже не была, так что выбор был свободный. Первое, что заметил: ошибка. Сказать, что доволен — ничего не сказать

Repair: stove
See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about Lex cooktop repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Can the glass-ceramic surface on a Lex cooktop be replaced separately?

Yes, the glass-ceramic surface can be replaced as a separate part if the crack hasn't affected the housing or the touch layer. The glass is matched to the specific Lex model, so the final decision depends on the model.

Why does only one burner heat on a Lex cooktop?

Most often the cause is a burned-out heating element, relay, or triac on the control board. During diagnostics, the technician checks each circuit separately and determines exactly what has failed.

Why is a crack in the glass-ceramic surface of a Lex cooktop dangerous during cooking?

Moisture and grease get inside the housing through the crack, which can cause a short circuit and damage the board. It's best not to cook on such a cooktop until a technician has inspected it.

Do you repair Lex cooktops after the manufacturer's warranty expires?

Yes, we accept Lex cooktops for repair even after the factory warranty expires; the age of the appliance doesn't matter. We provide a 1-year warranty on labor and parts.

What can I check myself if a Lex induction cooktop doesn't detect the pot?

First, make sure the cookware has a ferromagnetic base and is suitable for induction, and that the diameter matches the heating zone. If the cooktop works with another pot, the issue is with the cookware, not a malfunction.

Do you repair Lex cooktops at home in Almaty or take them to the service center?

The technician fixes most Lex malfunctions at home in Almaty; a visit within the city takes up to 60 minutes. The cooktop is taken to the service center only if complex board repair or glass replacement is needed.

Repair guideArticleTECH SERVICE08

Lex cooktop repair in Almaty by a direct contractor

Ruslan Ts., washing machine and refrigerator repair technician

Author: Ruslan Ts.,Washing machine and refrigerator repair technician

Published
Updated

Tech Service repairs Lex cooktops in Almaty: our technician arrives at your home within 60 minutes, or the cooktop is repaired at our service center. Diagnostics are free, with a 1-year warranty on labor and parts, and technicians with 4 to 20 years of experience. We provide the cost after diagnostics.

Why a Lex cooktop won't turn on and what the display signals mean

When a Lex cooktop won't turn on or beeps with a code on the display, it's always a signal from the electronics. Here's how to read typical messages and what's safe to do before the technician arrives.

Why a Lex cooktop won't turn on

Most often, we find that a Lex appliance that won't turn on has a faulty power supply or power board, and less often a break in the on relay circuit. The power supply delivers voltage to the components, and when it fails, the touch module gets no power: the indicators go dark and the buttons don't respond. The power board handles switching the burners, so if it's damaged, the appliance may start but not heat. A break in the on relay shows up differently—there's no click when you try to start it. Our technician arrives for diagnostics anywhere in the city within 60 minutes and checks the power circuit and power section in order. If the appliance doesn't respond at all, don't repeatedly tap the touch panel or flip the breaker in the panel—it won't help find the cause and makes diagnostics take longer.

What the E error on a Lex cooktop display means

  • Board self-diagnostics: a letter code with a number points to a specific component, not a complete failure of the appliance.
  • Cookware sensor: a signal for this component appears when the board isn't getting data about cookware on the burner.
  • Cooling fan: a symbol for airflow means the power section is overheating or the fan blade has stopped.
  • Touch module: a message about the touch sensor means the board isn't detecting button presses.
  • Control board: a communication error indicates the control module isn't exchanging data with the power section.
  • Record it before the visit: take a photo of the message—it makes it easier to bring the right part right away and avoid a second diagnostic visit.

What's safe to do before the technician arrives

  • Cut the power: turn off the breaker in the panel or unplug the cooktop if you can reach the plug.
  • Photograph the code: the message on the display will tell the technician which component to check first.
  • Don't take it apart yourself: removing the cover without the right tools often adds broken fasteners to the problem.
  • Don't turn it back on: if the cooktop clicks and flashes, repeated starts can finish off the on relay.
  • Note what happened before: a power surge, spilled liquid, or crackling helps narrow down the cause.
  • Wait for the technician: unplugging the cooktop is the only action that reduces risk to the wiring and electronics while the specialist is on the way.

What most often breaks on Lex cooktops

Different components fail on Lex cooktops, and the component determines whether the appliance can be fixed on-site or needs to be taken to the service center. Below is a map of typical faults by component.

Glass, burners, or electronics—where failures most often occur

Faulty componentHow it shows upWhat we check
Control boardcooktop won't turn on, error on displaytraces, relays, component power
Power supplyno response to touchoutput voltage
Hi-Light burnerzone heats weaker or not at allcoil, connections
Induction coilzone doesn't heat cookwarecoil, cookware sensor
Glass-ceramic surfacecrack, chipsurface integrity
Touch paneltouch doesn't respondribbon cable, contacts

Why a Lex cooktop clicks and the indicator flashes

Clicking when you turn it on is the relay switching the burner's heating element, but if the sounds are frequent and the indicator blinks, the switch or the electronics are overloaded. As contacts wear, they trip more often than they should, and the board sends the signal again. A blinking indicator at that moment means unstable power to the unit or that the sensor isn't confirming heating. You shouldn't use such a panel — the contact may stick in the closed position, and then the burner won't turn off. In my opinion, the frequent cause here is not the switch itself but low power at its coil: the relay gets undervoltage, can't pull the armature in, and chatters without engaging. So with such complaints we start by measuring the power supply output, not by replacing the relay at random.

The touch sensor doesn't respond and the glass is cracked — what to do

  • Non-working touch sensor: we check the ribbon cable and control panel contacts, and if there's a break, we replace the whole unit.
  • Crack or chip: we replace the glass-ceramic surface completely if the other components are intact.
  • Moisture damage: water gets to the electronics through the chip, so we check the board first.
  • Combined case: cracked glass and a non-working sensor often mean moisture has reached the controls.
  • What we avoid: we don't seal cracks — sealant doesn't hold up to heat and doesn't protect the electronics.
  • Work order: free diagnostics first, then the technician quotes the price and agrees on the scope of work.

When it's not a panel failure but cookware, wiring, or voltage

Some Lex appliance calls end not with a repair but with replacing cookware or checking the wiring. Here's how to tell a breakdown from an external cause.

Lex induction panel doesn't detect cookware

A Lex induction cooktop doesn't detect cookware more often because of unsuitable pots than a faulty cookware sensor. The induction coil creates an alternating magnetic field that heats only ferromagnetic bottoms — cast iron, enameled steel with a magnetic layer, special induction cookware. Aluminum, copper, and ceramic without a metal insert don't respond: the sensor doesn't detect a load, and the zone turns off or shows a signal on the display. The bottom diameter also matters — a pot smaller than the burner or with an off-center bottom doesn't cover the coil completely, and heating is intermittent. It's easy to check — put another pot with a thick ferromagnetic bottom on the zone; if it heats up, the issue is the cookware, not the appliance. A magnet on the bottom is a quick test: if it sticks, the cookware is suitable.

Lex panel after a voltage surge

After a voltage surge, we more often find a burnt-out power supply or power board in Lex appliances rather than mechanical damage. The surge from the mains travels through the chain: input filter, power supply, control board — and takes out the unit that first failed to withstand the spike. The control board often shows dark spots, and capacitors bulge, and the touch sensor stops responding to touches. In our practice, such calls come after thunderstorms and substation accidents, and diagnostics immediately show an electrical cause rather than worn parts. If the device doesn't turn on after a voltage surge, don't test it by turning it on repeatedly — each start applies voltage to an already damaged unit and expands the burn area.

How to tell a panel failure from a wiring problem

  • Check the outlet: plug in another appliance and make sure there's voltage in the mains.
  • Check the breaker: a tripped breaker in the panel is a common reason the appliance is dead.
  • Change the cookware: induction needs a pot with a ferromagnetic bottom, otherwise the zone won't start.
  • Consider the timing: if the device went dead after a voltage surge, the cause is most likely the electronics.
  • Don't disassemble it yourself: without tools, it's easy to damage the sensor ribbon cable or strip the glass fasteners.
  • Call a technician: if there's voltage in the outlet but the panel is dead, the next step is to check the appliance itself — that's where repair begins.

How Lex cooktop repair works at home and in the service center

We start work on Lex cooktops with a request and free diagnostics, then decide whether to repair on-site or at the service center. We cover both scenarios.

Lex cooktop repair at home

  • When we come to you: the issue doesn't require removing the device from the countertop, so we fix it on-site.
  • Touch panel and electronics: we replace the touch panel or control board right in your kitchen.
  • On-site technician: arrives with their own tools and doesn't rely on what the homeowner has on hand.
  • Time and convenience: this scenario saves time—no need to transport the appliance and wait for return delivery.
  • Glass limitation: if glass-ceramic replacement is needed, it's more convenient to service the device at the service center.
  • Level surface: when installing new glass-ceramic on-site, it's difficult to ensure a level surface without tilting.

When a Lex cooktop is repaired at the service center

At the service center, we take Lex appliances when glass-ceramic replacement or complex board soldering is needed—tasks that can't be done in the kitchen. The glass-ceramic surface is replaced on a level platform where the part won't warp during installation, and electronics are soldered with access to both sides of the board. The device is carefully removed from the countertop: fasteners and seals are just as important during reinstallation as the work itself. In my experience, cooktops with cracked glass and burnt traces on the board after power surges most often come into the service center. Before removal, take a photo of the terminal wiring diagram—this speeds up reassembly and reduces the risk of mixing up wires. The technician at the service center tests the burners and checks insulation so that after reassembly the cooktop doesn't show the same error again. If you need Lex cooktop repair in Almaty, this scenario with device removal is suitable for complex cases involving glass-ceramic and the board.

How long to wait for a technician and how to book

  • Submit a request: describe your Lex cooktop model and the symptom so the specialist can prepare.
  • Provide the error code: if it's on the display, it will speed up diagnostics.
  • Wait for the visit: the technician arrives within 60 minutes anywhere in the city.
  • Get diagnostics: it's free, and the specialist will identify the cause of the malfunction.
  • Approve the work: the cost is quoted after diagnostics, before work begins.
  • Specify the symptom in advance: the more accurate the description, the faster the right set of tools and parts is determined.

Diagnostics, cost, and warranty for Lex cooktop repair

Clients most often ask three questions: how we find the cause, how much it costs, and what happens next. We answer with facts about our work—no promises and no amounts.

Free diagnostics for Lex cooktops

We provide diagnostics for Lex appliances free of charge—the technician finds the cause and quotes the repair cost before work begins. On-site, we check the power supply, ribbon cable integrity, control board condition, and touch response: these four points show exactly where contact was lost or a component burned out. After free diagnostics, you hear the cost before the appliance is disassembled—so you, not the technician, decide whether to proceed with the repair. A city visit takes up to 60 minutes, and based on the inspection you get a specific fault, not a general verdict. Free diagnostics only makes sense if it gives you a clear cause rather than 'everything needs replacing'—so ask them to name the failed component.

1-year warranty on labor and parts

For Lex appliance repair, we provide a 1-year warranty on labor and parts. This means that replacement of the control board, touch layer, or burner is covered by a single term: if a part installed by the technician fails within a year, it is replaced again at no charge. Our technicians have 4 to 20 years of experience, and with this brand they know which parts fail again after incorrect initial replacement. We accept Kaspi QR, Kaspi Red, card, cash or bank transfer convenient for the client. The warranty on parts is just as important as on labor—if a new board fails, it is replaced under warranty, not at the client's expense, so keep your repair confirmation until the end of the term.

Repair or a new cooktop

Repairing Lex cooktops usually makes sense when a single component fails — the board, touch sensor, or burner — while the glass and body are intact. The decision depends on what exactly is damaged: if the control board or one burner fails, only that element is replaced, and the glass-ceramic surface stays original. Replacing the touch layer restores responsiveness if the surface itself isn't cracked, whereas a crack in the glass requires replacing the glass-ceramic entirely — the most expensive component in the design. When the glass, board, and burners are all damaged at once, repair can be comparable to buying a new cooktop. If the surface, electronics, and heaters are affected simultaneously, it's worth discussing with the technician after diagnostics, once the cause and scope of work are known.

Who will come and why a direct contractor is better than an aggregator

Search results for Lex appliance repair are full of aggregators, and the client doesn't understand who will actually show up. We explain how a direct contractor differs from an intermediary and what that changes for the appliance owner.

Our own technicians, not an intermediary

  • Direct contractor: our staff specialist comes to you, not a subcontractor that an aggregator found for your request.
  • One responsible person: the same person who performed diagnostics does the work, so they are personally accountable for the result.
  • Warranty without a chain: we provide a 1-year warranty on labor and parts directly, with no correspondence between intermediaries.
  • Repeat visit: if we need to return to the cooktop, our own employee comes, not a random contractor from the aggregator's database.
  • Direct payment: we accept Kaspi QR, Kaspi Red, bank card, cash or bank transfer; money doesn't go through a third party with its markup.

Technician experience and work with Lex cooktops

Tech Service technicians have 4 to 20 years of experience and work with Lex induction and electric glass-ceramic models. Over this time, they have handled various generations of this brand's appliances — from simple two-burner models to cooktops with touch controls and a power board. Experience with a specific brand shows in the details: the specialist knows where the mounts are located on a Lex cooktop, how to remove the glass-ceramic without chipping it, and which components to check first when an error appears on the display. This sequence saves time: the technician doesn't spend the first hour figuring out an unfamiliar disassembly and goes straight to the control board or burner. In my view, this is what distinguishes brand-specific work from generic repair, where you have to figure things out from scratch every time.

Lex cooktop after the manufacturer's warranty

  • Age is no obstacle: a Lex cooktop after the manufacturer's warranty is serviced the same as one under warranty; there are no age restrictions for the appliance.
  • Control board: most post-warranty work involves the control board, burners, and touch layer, not the body.
  • Free diagnostics: before any work, the specialist performs free diagnostics and identifies the cause of the breakdown.
  • Benefit of restoration: a post-warranty cooktop has already proven itself over time, while a new one may bring the same factory defects, so restoration is often more sensible than replacement.
  • Warranty after work: we provide a 1-year warranty on completed work and installed parts, regardless of how old the cooktop itself is.

What to remember about Lex cooktop repair

A quick rundown of what Lex panel owners should keep in mind: what affects the outcome and what to look for when choosing a technician.

  • A symptom is not a diagnosis: an error code or clicking points to a component, but only diagnostics reveals the exact cause.
  • Check the obvious first: dishes, the outlet, and the circuit breaker are common culprits behind false service calls.
  • At home or in the shop: the choice depends on the component — the sensor and board can be fixed on-site, while the glass is easier to replace in the shop.
  • Warranty matters: a 1-year warranty on labor and parts removes the risk of a repeat breakdown.
  • Direct contractor: our own technicians take personal responsibility for the result, with no middlemen.

24brands

Besides Lex, we repair other cooktop brands in Almaty

Our technicians work with cooktops of various brands, adapting to the design and electronics of each model.

We also repairWe also repairTECH SERVICE09

Besides Lex cooktop repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before Lex cooktop repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp