Open until 19:00+7 (775) 030 02 94Call a technician
Tech Service technician next to a gas boiler

Sime Gas Boiler Repair in Almaty

A technician arrives within 60 minutes anywhere in the city. Diagnostics are free.

  • 1-year warranty on labor and parts
  • 4 to 20 years of experience
  • You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima

Repair prices

  • Diagnostics0 ₸
  • Fan replacementfrom5 500 ₸
  • Temperature sensor replacementfrom6 000 ₸
  • Control board replacementfrom6 000 ₸
  • Gas valve replacementfrom7 000 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common Sime gas boiler faults in Almaty

Typical symptoms and likely causes, starting with the most common. The technician will pinpoint the exact cause during diagnostics.

PricesPricesTECH SERVICE03

How much Sime gas boiler repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Fan replacementparts not included

1–2 hours

from5 500 ₸

Temperature sensor replacementparts not included

1–2 hours

from6 000 ₸

Control board replacementparts not included

1–2 days

from6 000 ₸

Gas valve replacementparts not included

1–2 hours

from7 000 ₸

Three-way valve repairparts not included

1–2 hours

from7 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Sime gas boiler repair in Almaty

Radiators cold, humming and overheating

1 visittime

from 10 500 ₸cost

Problem
The Sime boiler heated the water, but the radiators stayed cold, while the boiler hummed and went into an overheating error.
What we did
The technician shut off the valves, drained the water from the boiler, replaced the worn circulation pump with a barely turning impeller, refilled the system, and checked circulation and radiator heating.
Result
The radiators heat evenly, the humming and overheating error are gone; the technician checked circulation and heating. 1-year warranty on labor and parts.
I want the same
Ariston gas boiler: radiators cold, humming and overheating — after repairBeforeAfter
01 / 04
All repairs
TECH SERVICE mobile technician with a tool case

How Sime gas boiler repair works at your home in Almaty

From request to check-up in five steps, with free diagnostics.

  1. Requestsame day

    Describe the symptom and boiler model so the technician can prepare for the visit.

  2. Technician visitwithin 60 minutes

    A technician arrives within 60 minutes anywhere in the city.

  3. Diagnosticsfree

    The technician asks the owner for the error code and access to the boiler before inspection.

  4. Work approvalright after

    The scope and order of work are confirmed and can be adjusted as needed.

  5. Check and warrantyafter repair

    The technician explains the result and gives operating recommendations.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Technician repairing a gas boiler at a customer’s home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book Sime gas boiler repair in Almaty

Keep the error code, boiler model and installation date handy. This speeds up diagnostics and parts selection.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (775) 030 02 94
Customer reviewsReviewsTECH SERVICE06

Reviews of Sime gas boiler repair in Almaty

Айнур М.Order No. TS-2735 · 8 July 2026

ours

Было подозрение, что дело в плате, хотелось услышать второе мнение. Второй месяц — полёт нормальный.

Repair: gas boiler repair in

Куаныш Б.Order No. ZK-6834 · 16 December 2025

ours

Было важно, чтобы сделали до выходных — гости, то-сё. С чем пришёл: не греет воду. Починили и дали гарантию на месяц.

Repair: gas boiler repair in

Елена К.Order No. TS-8372 · 9 March 2025

ours

Повод для визита: не зажигается. Дамир М возился с этим дольше, чем планировал, но довёл до конца. Починили и дали гарантию на месяц.

Repair: gas boiler repair in

Аида Т.Order No. 2024-7770 · 28 March 2024

ours

Поломка застала перед командировкой, тянуть было нельзя. Симптом был очевидный: течёт. Проверили на всех режимах, всё чётко.

Repair: gas boiler repair in

Владимир Н.Order No. 84104 · 6 May 2023

ours

Друг посоветовал, у него похожая история была. Честно, уже готовился покупать новое, но обошлось. Повод для визита: не греет воду. Никита М помог выбрать, без навязывания. Запчасть была в наличии, доплачивать не пришлось. Приехал без записи, приняли как есть. Под замену пошло: мембрана. В помещении тесновато, но это мелочи. Работает даже тише, чем до поломки

Repair: gas boiler repair in

Ляззат К.Order No. 2022-8617 · 8 November 2022

ours

Было подозрение, что дело в плате, хотелось услышать второе мнение. Основная жалоба — не греет. Проверил дома — всё на месте, ничего не забыли.

Repair: gas boiler repair in

Игорь Щ.Order No. ZK-2022/184 · 8 June 2022

ours

До этого обращался в другой сервис, там только развели руками. Честно, уже готовился покупать новое, но обошлось. С чем пришёл: течёт. Могли бы взять больше, но взяли по-божески. В списке работ — мембрана. Созвонились, договорились на удобное время, никто не тянул. Хороший сервис, побольше бы таких. Гудит ровно, не грееться, всё как надо.

Repair: gas boiler repair in

Айнур М.Order No. 2022-1316 · 28 April 2022

ours

Долго откладывал ремонт, потом всё-таки собрался. Долго искал, кому это отдать, и вот нашёл. Жалоба простая: течёт. Поменяли: насос. Заявку приняли по телефону, перезвонили через десять минут. Проверил дома — всё на месте, ничего не забыли

Repair: gas boiler repair in

Сабина Г.Order No. ZK-7520 · 4 October 2020

ours

Техниканы жөндеуге алып келу үшін арнайы уақыт бөлдім. Техника кенеттен істен шықты, қатты асығыс едім. Достарыма да айттым.

Repair: gas boiler repair in

Тимур И.Order No. 2018-4806 · 30 September 2018

ours

Бағасын алдын ала айтты, артынан қосымша талап етпеді. Мастер ақауды түсіндірді, қажетсіз нәрсе таңбады. Бағасын алдын ала келістік, соңында өзгерген жоқ. Диагностика тегін болды, бұл жағы жақсы. Кәсіби мамандар, рақмет.

Repair: gas boiler repair in
See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about Sime gas boiler repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Why does a Sime boiler show an error, and how do I figure out what it means?

The code on the Sime display points to a specific component: ignition, sensor, board, or circulation. The technician checks the model-specific meaning during free diagnostics and confirms the cause with a measurement.

Who in Almaty actually repairs Sime boilers, not just Daewoo and Navien?

We are a direct service provider and work on Sime boilers on-site: our technician arrives anywhere in the city within 60 minutes. Repairs are done by a specialist with 4 to 20 years of experience in gas equipment.

Can the Sime boiler control board be repaired separately, without replacing the whole boiler?

Yes, Sime boards are usually restored, and replaced only if the damage is beyond repair, depending on the model. The technician decides after checking the board on-site.

The Sime boiler isn't heating water in DHW mode — is it the board, the sensor, or the heat exchanger?

The cause could be in any of the three components; a single symptom won't pinpoint it. The technician checks the sensor, the three-way valve, and the heat exchanger, and identifies the culprit after diagnostics.

What does the technician check first when a Sime shows an ignition error?

First, the electrode and flame ionization, gas pressure, and gas valve operation. Then the board, if ignition isn't confirmed after these components.

Why shouldn't you repair a Sime gas boiler yourself, and when do you need a technician?

Gas equipment is dangerous: a repair mistake can lead to a leak or poisoning. A technician is needed for any gas-related fault, and also if the boiler won't start or keeps shutting down.

Repair guideArticleTECH SERVICE08

Sime Gas Boiler Repair in Almaty with Technician Visit

Author: TECH SERVICE editorial team

Published
Updated

Tech Service repairs Sime gas boilers in Almaty with its own technicians who have 4 to 20 years of experience. A technician arrives at your home within 60 minutes anywhere in the city, diagnostics are free, and there is a 1-year warranty on labor and parts. The technician provides the price after diagnostics.

Sime Boiler Error Codes and What They Mean

A signal on the display is not a verdict but a hint about which component to check first. Let's break down how to read these codes and the typical groups of faults we encounter on service calls.

How to Read an Error Code on a Sime Display

A code on a Sime display points to a group of components, not a specific part, so the technician first matches it with the symptom and then checks the component. Behind the code are the electronic module, temperature sensor, ignition electrode, and gas valve — each is part of its own chain, and troubleshooting by error code starts with the branch suggested by the boiler's behavior. At Tech Service, during free diagnostics, we first match the signal with when it appears: at startup, during operation, or while heating water. For technicians with 4 to 20 years of experience, this check takes minutes and immediately narrows down the inspections. The same code with different symptoms leads to different causes — note when it appears, as this speeds up diagnostics. If the code requires Sime gas boiler repair in Almaty, the technician performs it on-site or at the service center.

Ignition Failure and Flame Loss

  • Ignition electrode: we check the gap and carbon buildup — a misaligned or dirty part produces a weak spark, and the boiler fails to ignite.
  • Ionization electrode: responsible for flame monitoring; if dirty, the module doesn't detect the flame and shuts off the gas.
  • Gas valve: we check opening and tightness — a stuck valve doesn't let gas reach the burner.
  • Burner: we inspect for dirt and soot, which cause the flame to go out a few seconds after ignition.
  • Flame sensor: if it gives false readings, the burner goes out even though ignition and the valve are working — cleaning and adjustment sometimes solve the issue without replacing components.

Why a Sime Boiler Goes into Error During Voltage Surges

  • Electronic module: a power surge damages the Sime boiler's electronics — the control loses settings or stops seeing sensors, and the unit goes into error.
  • Symptoms after a surge: the fault reappears after every spike, the boiler won't start or runs erratically.
  • Prevention: a voltage stabilizer or UPS for the boiler protects the electronics and costs less than replacing the module — it's prevention, not a luxury.
  • Check order: for recurring faults after surges, we check the power supply before replacing electronics — otherwise the new part will fail just the same.

Signs of Breakdown and How We Find the Cause

The owner sees a symptom, while the technician sees the chain of components behind it. Let's look at three common scenarios and how to tell an expensive breakdown from a simple one without replacing parts at random.

Sime Boiler Won't Start or the Burner Goes Out

If a Sime boiler won't start, we check the ignition chain in order — power, gas valve, electrode, flame sensor — to avoid replacing components at random. First we make sure the board sends the ignition command and a spark reaches the electrode; then we see if the gas valve opens and the flame sensor holds the flame. We inspect the fan and draft pressure switch separately: with weak airflow, the automation blocks ignition even when the electronics are fine. On Sime boilers with a closed combustion chamber, a going-out burner is more often related to draft or a dirty heat exchanger than to the board. So starting with replacing the electronics is unnecessary expense: first we blow through and clean, then draw conclusions about parts.

Pressure or Flow Drops in the System

  • Expansion tank: absorbs the expansion of the heating fluid as it warms up; if the membrane has lost its elasticity, the pressure gauge jumps after every cycle.
  • Safety valve: releases excess pressure through the drain; a leak shows up as drops under the boiler and a drop in pressure.
  • Pressure sensor: when it fails, it distorts the readings on the display even though the actual pressure in the circuit is normal.
  • Circulation pump: a clogged or airlocked unit reduces flow, and the system heats unevenly across the radiators.
  • System clogging: sludge and scale in the circuit restrict flow, causing pressure and heating to behave erratically.
  • Leak in the heating circuit: if the gauge drops regularly, the cause is often outside the boiler — topping up without finding the leak only masks the problem.

Sime boiler not heating water in DHW mode

When a Sime boiler doesn't heat water in DHW mode, we distinguish three causes — the flow sensor, the secondary heat exchanger, and the control board — and check them in that order. First we see whether the flow sensor responds when the tap is opened: if there's no signal, the boiler doesn't switch to water heating mode. Then we check the secondary heat exchanger — it's responsible for heating water in the flow circuit, and a layer of scale gradually reduces the outlet temperature. We test the control board last: it switches the three-way valve and sets the mode. The pattern of the problem points to the solution — a gradual drop in temperature indicates a dirty heat exchanger, while a sudden failure is more often caused by the flow sensor. This difference is how the technician decides what to flush and what to replace.

Which Sime components we repair and replace

Not every component needs replacing — some faults can be fixed by restoration. Here's what we check and what we most often replace on Sime equipment.

Sime control board — repair or replacement

We start by diagnosing the Sime control board, and if the problem is in the contacts, connectors, or a single component, we repair it; we suggest replacement only if the board itself is damaged. Most often the traces near the connectors suffer after voltage spikes, and the ignition relay contacts burn — resoldering them restores the electronics without installing a new part. Replacement is needed when the processor has burned out or the board layer is damaged, and repair would cost more than a new component. The boiler's behavior helps distinguish a board fault from a temperature sensor fault: the automation fails in several modes at once, while a pressure or flow sensor usually fails locally, in one circuit. Before installing a new part, the technician checks the part number against the model — Sime modifications differ in firmware for a specific series.

What we check and replace on Sime boilers

ComponentWhat we checkWhat we most often do
Control boardcontacts, components, response to modesrepair or replacement
Gas valvegas supply, tightnesscleaning or replacement
Heat exchangerheating, scale, DHW flowflushing or replacement
Circulation pumpflow, noise, rotationrepair or replacement
Sensorstemperature, pressure, flow readingsreplacement
Burner and electrodesignition, contaminationcleaning, adjustment, replacement

Repair an old Sime boiler or replace it

  • One component: the gas valve or pump has failed — restoration gets the unit running again with minimal work.
  • Heat exchanger is intact: no leaks or heavy scale — the body still has life left, so it's too early to replace the unit.
  • Automation works: the board is stable in all modes — this is the main sign of a healthy boiler.
  • Multiple components need replacing: if the heat exchanger, board, and burner all need replacement, it makes sense to discuss a new unit.
  • Sime parts are available: this allows targeted repairs without replacing the whole boiler over one part.

How Sime gas boiler repair works

From your request to post-repair setup, we show every step so you understand the process and timing at each stage. Below is the sequence we follow on site.

From request to technician arrival in 60 minutes

  • Arrival in 60 minutes: after your request, our specialist arrives within an hour anywhere in the city, including private homes and cottage communities.
  • Tools on hand: the technician brings equipment to diagnose your Sime boiler on site, so no unit needs to be taken to the service center.
  • Details by phone: tell us the model and the error code from the display — the technician will prepare for that specific component before arriving.
  • Private home: for owners of suburban properties, the visit works the same as for apartments — distance within the city doesn't affect the timeframe.
  • Access to the boiler: clear space around the unit and the gas inlet, and remove any items — this speeds up the start of the inspection.

Free diagnostics and what the technician does at your home

Diagnostics are free: the specialist checks component by component based on the code and symptoms, finds the cause, and only then quotes the cost of work. First, they match the error code against the Sime fault table, then check the gas side — burner pressure, ignition operation, and flame sensor — and then move on to the hydraulics: pump, three-way valve, expansion tank, and safety group. They also inspect the control board and contacts separately, because some failures are related to wiring and voltage spikes. After the inspection, you receive a conclusion: which part has failed, whether it can be repaired or needs replacement, and what scope of work is ahead. Approval before work begins matters because it lets you choose — repair the component or install a new one — and avoid paying for unnecessary operations.

Repair, setup, and what to do if the error returns

  • Component replacement: we replace the faulty part with a new one, then check the connections for leaks and start the Sime boiler in operating mode.
  • Post-repair setup: we set the pressure in the circuit, adjust the gas side, and check ignition, heating, and hot water mode under load.
  • Operational check: we run the unit through several cycles to make sure the fault doesn't return during heating and mode switching.
  • If the error returns: contact us under warranty — 1-year warranty on labor and parts gives you the right to a free re-inspection.
  • Why it returns: a repeat failure often points to an unresolved root cause — voltage spikes or blockages — so we check the boiler's operating conditions, not just the component itself.

Warranty, parts, and why we are a direct contractor

The warranty and who exactly will come to your request are two key trust questions when servicing a boiler. We answer them directly, with facts about our work, without vague wording.

1-year warranty on labor and parts

For Sime gas boiler service, we provide a 1-year warranty on labor and a separate 1-year warranty on parts, including the control board and heat exchanger. We select parts for Sime specific to your model — wall-mounted and floor-standing series have different burners, hydraulic groups, and electronic modules, so there are no universal parts here. Based on the experience of technicians with 4–20 years of service, I can say: most repeat calls are not about work quality but external causes — voltage spikes, poor draft, or contaminated coolant. Warranty on a part and on labor are different things: if a component fails due to our fault, that's one case; if it's due to an external cause, that's another, and it's worth understanding this in advance.

A direct contractor, not an aggregator

  • A dedicated technician on your job: the technician works with Sime regularly, knows its hydraulics and electronics, and doesn't just follow a generic checklist.
  • 4 to 20 years of experience: this experience helps distinguish common model-specific faults from rare cases without unnecessary replacements.
  • On-site within 60 minutes: the technician reaches your address anywhere in the city within the agreed time, without passing the job to someone else.
  • Accountability for the result: the warranty is provided by the person who did the work, not by an intermediary.
  • One point of contact: all questions about your Sime boiler are handled by the specialist who comes to you, with no switching between contractors.
  • Direct contractor, not a middleman: Tech Service doesn't pass the job to a third party — our own employee comes to you.

Payment and how the price is formed

  • Free diagnostics: the specialist inspects the boiler and finds the cause before any work, with no separate charge for this.
  • Approval before work starts: you approve the list of work and parts in advance, so the amount doesn't change along the way.
  • Payment methods: you can pay in cash or by card — whichever is more convenient for the owner.
  • Cost based on the actual issue: the final amount depends on the fault and the part needed, not on an upfront price list.
  • Transparent sequence: diagnostics, approval, work — each step is clear before the next one begins.

Safety and the limits of DIY repair

The owner can handle some tasks themselves, but gas equipment has limits you shouldn't cross. Below is where the risk is justified and where you need a technician.

Why it's dangerous to repair a gas boiler yourself

  • Gas valve: disassembling and reassembling without a leak test creates a risk of a leak that you can't see or hear until there's a smell in the room.
  • Burner: removing and reinstalling without checking the flame and draft disrupts combustion, and combustion products can cause poisoning.
  • Sensors and automation: replacing by eye without testing under load leaves the Sime boiler in emergency mode, and the error returns at the first cold snap.
  • Electricals: the control board and wiring are live — not an area to try the trial-and-error method.
  • Tools and experience: a manometer, gas analyzer, and tuning skills replace guesswork with precise measurements, while blind adjustments only make later intervention harder.

When you must call a technician

  • Gas smell: shut off the supply, open windows, and don't turn on electrical appliances — the technician finds the cause, not the owner.
  • Repeated ignition error: if the Sime boiler goes out right after startup several times in a row, the automation is already signaling a fault.
  • Pressure drop: frequent topping up without finding the cause points to a leak in the circuit or a faulty component.
  • No draft or back draft: combustion products must not remain in the room under any circumstances.
  • Before the heating season: a scheduled check is calmer than an emergency call in the middle of a cold snap.

Sime boiler maintenance before the heating season

We recommend servicing your Sime boiler once a year before the heating season — this includes checking the burner, heat exchanger, sensors, and tuning. During the work, the technician removes the cover, inspects the combustion chamber, cleans carbon deposits from the burner, checks the ignition and ionization electrodes, tests the gas circuit for leaks, and adjusts combustion parameters to the actual network pressure. Tuning after cleaning restores the boiler's rated performance: the flame becomes steady, gas consumption returns to normal, and the automation stops showing false errors. Based on our team's experience, Sime boilers that are serviced annually are less likely to go into emergency mode in January when the load is at its highest. Write the date of the last cleaning somewhere visible — it makes it easier not to miss the next season.

Sime gas boiler repair what to expect

Understanding Sime gas boiler failures comes down to a few practical points that will help you quickly identify the cause of a breakdown and prepare for the technician's visit.

  • An error code is a guide: on the Sime display, a code points to a group of components, so troubleshooting starts with the symptom, not with random part replacement.
  • Common causes: ignition failures, pressure drops, and DHW issues are distinguished by how they manifest—how often they occur and under which modes.
  • Not everything is replaced: the control board and heat exchanger are not always replaced—some components can be restored or flushed.
  • Gas work requires a technician: working on gas equipment without checking the tightness of connections is dangerous for apartment residents.
  • What to clarify in advance: the warranty terms for labor and parts and the procedure for agreeing on the cost before work begins.

20brands

Besides Sime, we repair other gas boiler brands in Almaty

Choose your boiler brand from the list below to go to its page.

We also repairWe also repairTECH SERVICE09

Besides Sime gas boiler repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before Sime gas boiler repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp