Open until 19:00+7 (775) 030 02 94Call a technician
Tech Service technician next to a gas boiler

Daewoo Gas Boiler Repair in Almaty

A technician will come and find the cause of the problem. Diagnostics are free, with a 1-year warranty on labor and parts.

  • On-site within 60 minutes across the city
  • 4 to 20 years of experience

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima

Repair prices

  • Diagnostics0 ₸
  • Fan replacementfrom5 500 ₸
  • Temperature sensor replacementfrom6 000 ₸
  • Control board replacementfrom6 000 ₸
  • Gas valve replacementfrom7 000 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common Daewoo gas boiler faults in Almaty

Below are typical symptoms of Daewoo gas boiler failures and the components most often checked first.

PricesPricesTECH SERVICE03

How much Daewoo gas boiler repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Fan replacementparts not included

1–2 hours

from5 500 ₸

Temperature sensor replacementparts not included

1–2 hours

from6 000 ₸

Control board replacementparts not included

1–2 days

from6 000 ₸

Gas valve replacementparts not included

1–2 hours

from7 000 ₸

Three-way valve repairparts not included

1–2 hours

from7 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Daewoo gas boiler repair in Almaty

Radiators cold, humming and overheating

1 visittime

from 10 500 ₸cost

Problem
The Daewoo boiler heated water, but the radiators stayed cold, while the boiler hummed and went into an overheating error.
What we did
The technician shut off the valves, drained the water from the boiler, replaced the worn-out circulation pump with a barely turning impeller, refilled the system and checked the circulation.
Result
The radiators warmed up, the humming and overheating error disappeared. 1-year warranty on the work and on the parts.
I want the same
Ariston gas boiler: radiators cold, humming and overheating — after repairBeforeAfter
01 / 04
All repairs
TECH SERVICE mobile technician with a tool case

How Daewoo gas boiler repair works at your home in Almaty

Five clear steps from request to handover after boiler repair.

  1. Requeston the day of request

    Describe the symptom and boiler model, and the technician will arrange a convenient visit time.

  2. Technician visitwithin 60 minutes

    Before the visit, the technician confirms the model, symptom, and error code by phone to bring the necessary parts.

  3. Identifying the causebefore repair

    The technician agrees with you on the cause of the failure and the list of components to check, so the scope of work is clear in advance.

  4. Approval of workafter inspection

    The technician explains what needs to be replaced and agrees on the scope of work with you.

  5. Handoverupon completion

    The technician explains how to operate the replaced component and what to watch for in the first days.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Technician repairing a gas boiler at a customer’s home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book Daewoo gas boiler repair in Almaty

Leave a request — a technician will arrive within 60 minutes across the city. Diagnostics are free, and after repair there is a 1-year warranty on labor and parts.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (775) 030 02 94
Customer reviewsReviewsTECH SERVICE06

Reviews of Daewoo gas boiler repair in Almaty

Айнур М.Order No. TS-2735 · 8 July 2026

ours

Было подозрение, что дело в плате, хотелось услышать второе мнение. Второй месяц — полёт нормальный.

Repair: gas boiler repair in

Куаныш Б.Order No. ZK-6834 · 16 December 2025

ours

Было важно, чтобы сделали до выходных — гости, то-сё. С чем пришёл: не греет воду. Починили и дали гарантию на месяц.

Repair: gas boiler repair in

Елена К.Order No. TS-8372 · 9 March 2025

ours

Повод для визита: не зажигается. Дамир М возился с этим дольше, чем планировал, но довёл до конца. Починили и дали гарантию на месяц.

Repair: gas boiler repair in

Аида Т.Order No. 2024-7770 · 28 March 2024

ours

Поломка застала перед командировкой, тянуть было нельзя. Симптом был очевидный: течёт. Проверили на всех режимах, всё чётко.

Repair: gas boiler repair in

Владимир Н.Order No. 84104 · 6 May 2023

ours

Друг посоветовал, у него похожая история была. Честно, уже готовился покупать новое, но обошлось. Повод для визита: не греет воду. Никита М помог выбрать, без навязывания. Запчасть была в наличии, доплачивать не пришлось. Приехал без записи, приняли как есть. Под замену пошло: мембрана. В помещении тесновато, но это мелочи. Работает даже тише, чем до поломки

Repair: gas boiler repair in

Ляззат К.Order No. 2022-8617 · 8 November 2022

ours

Было подозрение, что дело в плате, хотелось услышать второе мнение. Основная жалоба — не греет. Проверил дома — всё на месте, ничего не забыли.

Repair: gas boiler repair in

Игорь Щ.Order No. ZK-2022/184 · 8 June 2022

ours

До этого обращался в другой сервис, там только развели руками. Честно, уже готовился покупать новое, но обошлось. С чем пришёл: течёт. Могли бы взять больше, но взяли по-божески. В списке работ — мембрана. Созвонились, договорились на удобное время, никто не тянул. Хороший сервис, побольше бы таких. Гудит ровно, не грееться, всё как надо.

Repair: gas boiler repair in

Тимур И.Order No. 2018-4806 · 30 September 2018

ours

Бағасын алдын ала айтты, артынан қосымша талап етпеді. Мастер ақауды түсіндірді, қажетсіз нәрсе таңбады. Бағасын алдын ала келістік, соңында өзгерген жоқ. Диагностика тегін болды, бұл жағы жақсы. Кәсіби мамандар, рақмет.

Repair: gas boiler repair in

Мадина Т.Order No. TS-1804-911 · 21 May 2018

ours

Никита М честно сказал, что менять, а что ещё походит. Проверили на всех режимах, всё чётко.

Repair: gas boiler repair in

Асель Ж.Order No. 2016-8357 · 10 November 2016

ours

До этого обращался в другой сервис, там только развели руками. Первое, что заметил: не греет. Пользуюсь ежедневно, вопросов нет.

Repair: gas boiler repair in
See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about Daewoo gas boiler repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Which brand of gas boilers is considered good?

There's no clear leader: each brand has its own strong components and service availability. For an apartment in Almaty, having service and spare parts matters more than the brand name alone.

What fails most often in Daewoo boilers?

Daewoo boilers most often come in with scale in the heat exchanger, burner wear, control board faults, and seal leaks. The exact set depends on the model and operating conditions.

Why does a wall-mounted Daewoo boiler lose pressure and need topping up?

It's usually a leak in the circuit, a faulty expansion tank, or discharge through the safety valve. A technician will find the cause on site and tell you what needs replacing.

How can you tell if the heat exchanger in a Daewoo boiler is clogged?

Signs include weak heating, noise during operation, and rising gas consumption at the same settings. It depends on the model, but flushing or cleaning the unit often helps.

How does repairing a floor-standing Daewoo boiler differ from a wall-mounted one?

Floor-standing models are simpler in terms of electronics but heavier in components and require more space for disassembly. Wall-mounted units are more tightly packed, so the board and sensors are more prone to issues.

Can the control board of a Daewoo boiler be repaired, or is it replaced?

The board is more often repaired: relays, capacitors, and traces are replaced. Replacement is needed if the damage is irreversible—it depends on the model and component availability.

Repair guideArticleTECH SERVICE08

Daewoo gas boiler repair in Almaty by a direct contractor

Author: TECH SERVICE editorial team

Published
Updated

Tech Service repairs Daewoo gas boilers in Almaty: our technician arrives at your home within 60 minutes or takes the boiler to our service center. Diagnostics are free, the price is given after diagnostics, and we provide a 1-year warranty on labor and parts. Technicians with 4 to 20 years of experience know the error codes and components of this brand.

Why Daewoo gas boilers need repair and how we identify the issue

Daewoo gas boilers are Korean-made appliances with their own logic for components and electronics. Here we explain why this brand has typical failures and how we identify them during diagnostics.

How Daewoo gas boilers differ in design

We service Daewoo gas boilers with their design in mind: wall-mounted dual-circuit models are built around a secondary heat exchanger, a three-way valve, and a control board that manages ignition and switching between heating and hot water. The secondary heat exchanger heats water in the DHW circuit, the three-way valve directs flow between circuits, and the electronics read temperature sensors and the water flow sensor. These components work in close interdependence: a failure in one changes the behavior of the others, and externally it looks like a breakdown of a completely different part. We repair Daewoo gas boilers in Almaty taking this component chain into account. Our technicians have worked with the brand for 4 to 20 years and know how each element behaves in this setup. Knowing the specific component chain of the brand speeds up diagnostics — the technician immediately checks the parts that fail more often on Daewoo, rather than going through the entire boiler one by one.

Why the same components fail on Daewoo

  • Secondary heat exchanger: gets clogged with scale and combustion products, reducing water heating in the DHW circuit.
  • Three-way valve: loses mobility due to deposits and stops switching flow between heating and hot water.
  • Circulation pump: wears out from constant operation and coolant contamination, reducing pressure in the circuit.
  • Control board: suffers from voltage surges and moisture, causing ignition and boiler mode failures.
  • Sensors and water flow sensor: distort the signal when dirty, and the board receives incorrect temperature and flow data.

How we distinguish a component failure from an electronics fault

We start with free diagnostics: we check power, sensors, and board signals, and only then conclude whether the electronics or a mechanical component is at fault. The technician reads the temperature sensors and water flow sensor, compares them with the control board's response to ignition and mode switching, and tests the circuits. If the sensor signal is distorted, the board receives incorrect data and shows an error even though it is working properly. We check the mechanical part separately: three-way valve mobility, pump pressure, heat exchanger flow. This order prevents replacing parts at random. An error on the display does not always point to the board itself — often it is caused by a sensor or clog, so replacing electronics without checking the circuit means paying for an unnecessary part.

Error codes and symptoms for Daewoo gas boiler repair

We break down common Daewoo owner complaints — from a display code to pressure loss — and show what lies behind each and what the technician does on site.

Daewoo boiler won't turn on or shows an error on the display

If a Daewoo boiler won't turn on or shows an error code, we decode the signal for the specific model and inspect the ignition circuit, temperature sensors, and gas fittings — this is the first thing we check during diagnostics. Diagnostics are free, and a technician arrives within 60 minutes anywhere in the city, so code decoding and component inspection happen in one visit. Error codes on the Daewoo display are read differently for wall-mounted and floor-standing series: a signal that indicates flame failure on one model means a problem with the draft sensor or ignition electrode on another. The gas fittings are often working fine — then the cause lies in contacts or the sensor itself. The code on the display is a hint, not a verdict: the same signal on different Daewoo models can point to different components, so we always verify the decoding against the specific model's manual, not a generic table from the internet.

Daewoo boiler doesn't heat water, but heating works

When the heating works but the hot water doesn't heat up, we check the secondary heat exchanger, the three-way valve, and the water flow sensor. Most often the cause is a clogged heat exchanger or a stuck valve. The three-way valve switches the flow between the heating circuit and the domestic hot water circuit. When there's scale or the stem is worn, it gets stuck in one position: the radiators are hot, but cold water comes out of the tap. In this case, the water flow sensor may not detect the flow and won't send a signal to heat. Flushing the secondary heat exchanger doesn't always help: if scale has corroded the walls, the unit is replaced, and the technician tells you this after disassembly, not in advance. On Daewoo models with a plastic secondary circuit, we first take readings from the water flow sensor and check the valve movement manually. This rules out half of the false diagnoses before disassembly.

Daewoo boiler goes out, loses pressure, or leaks

  • Flame goes out after ignition: we check the draft in the flue and the flame control electrode. With reverse draft or a dirty electrode, the burner won't stay lit.
  • Pressure drops: we look for leaks at the seals and in the expansion tank, inspect the nipple and the integrity of the membrane.
  • Boiler leaks under the casing: we check the heat exchanger gaskets and gas fittings connections. Most often it's a joint that leaks, not the unit itself.
  • Constant topping up doesn't solve the problem: it masks a leak or a draft failure, and without finding the source, the boiler returns to the same error.

Daewoo boiler components and typical weak points of the brand

We show which Daewoo boiler components need attention and what exactly is done during service, from flushing the heat exchanger to replacing parts.

Heat exchanger, burner, and pump: what we check and what we do

ComponentWhat we checkWhat we do
Heat exchangerclogs, scale, leaksflushing, replacement
Burner and nozzlesflame, clogs, ignitioncleaning, adjustment
Circulation pumpnoise, circulationinspection, replacement
Fan (flue fan)draft, vibrationinspection, replacement

Control board: repair or replace

We first diagnose the Daewoo boiler control board: if the problem is in the contacts, sensor, or circuit, we don't touch the electronics. If the module is burned out, we offer repair or replacement based on its condition. During diagnostics, we check the temperature sensors, the integrity of the traces and connectors, and test the output stages under load. We replace the module when a power element is blown or a section of the board is charred. Soldering in such a place won't withstand vibration and heat. Replacing electronics at the first error is a common mistake: some signals come from sensors and wiring, and after replacement, the symptom returns. So before replacing, check the temperature sensor circuit and inspect the connector. On older models, an oxidized contact gives the same error as a burned-out module. We also check power stabilization separately: voltage spikes in the mains are the first to damage the power section of the board, not the logic.

Repairing old Daewoo models when parts are no longer available

We also service Daewoo boilers that were installed years ago: during diagnostics we identify which component has failed and select a compatible part for the specific model. We look up parts for Daewoo boilers by the component's marking, not by the series name: the same casing can have different revisions of the burner and control board, and a part from a neighboring version won't fit without modification. We select a compatible analog by mounting dimensions, thread, and electrical parameters — so the pump or sensor works without modifying the casing. The repairability of an old boiler depends not on the year of manufacture but on the condition of the heat exchanger and casing — if they are intact, replacing the component gets the boiler running again. Before ordering a part, check the revision on the nameplate: a one-digit difference often means a different connector and a different pump shaft length. Our technicians have worked with Daewoo boilers for 4 to 20 years and know from experience which components in older series can be replaced without modifying the casing.

Wall-mounted and floor-standing Daewoo and when service is needed

Wall-mounted and floor-standing Daewoo boilers break down differently, and their servicing differs. We explain the design differences and when it's time to call a technician for preventive maintenance.

How servicing a wall-mounted Daewoo differs from a floor-standing one

Wall-mounted dual-circuit Daewoo boilers more often require attention to the secondary heat exchanger and three-way valve, while floor-standing ones require attention to the burner, gas fittings, and draft, so the set of checks during diagnostics is different. In wall-mounted dual-circuit boilers, the secondary heat exchanger gets clogged with scale, and the three-way valve seizes up from hard water — these are the first components the technician checks when there are complaints about hot water. In floor-standing Daewoo gas boilers, the weak points are the burner and gas fittings: the flame turns yellow, draft drops, and the automation detects unstable combustion. Our Daewoo gas boiler repair in Almaty is built around these different components, so we always confirm the boiler type before the visit. The boiler type determines which components the technician checks first, so when calling, it's worth naming the model — this speeds up diagnostics and parts selection.

How often to service a Daewoo boiler

  • Before the heating season: service your Daewoo boiler in advance — preventive maintenance includes checking components, cleaning the burner and heat exchanger, and monitoring system pressure.
  • Cleaning the burner and heat exchanger: scale and soot reduce heat output, so we clean before the seasonal start, not in the middle of a cold snap.
  • Monitoring system pressure: a pressure drop indicates a leak or wear of the expansion tank — we check this during preventive maintenance.
  • Inspecting gaskets and connections: seal wear is noticeable before a leak appears — inspection during seasonal service reveals it.
  • Result of preventive maintenance: regular inspection doesn't guarantee the absence of breakdowns, but it allows you to notice gasket wear and clogging before the boiler stops with an error in the middle of a cold snap.

When it's time to call a technician instead of waiting

  • The boiler goes out and won't hold the flame: unstable combustion indicates problems with the burner, draft, or gas fittings — don't put off the call.
  • Pressure drops in the system: regular topping up signals a leak or a faulty expansion tank, which is best found early.
  • Noise from the pump or fan: humming and unusual sounds are a sign of worn bearings in the circulation pump or a dirty impeller.
  • An error code on the display: decoding the code narrows down the components, and the technician arrives prepared, not blindly.
  • An early call is cheaper: owners dismiss some symptoms as normal — pump noise, a weak flame — but they are the first to indicate component wear.

How the repair is done and what the warranty covers

Working with a direct contractor is structured as a single line of responsibility from the call to the warranty. We show every step: what the technician does, where the work takes place, and what happens if the breakdown returns.

How diagnostics are performed and whether they are paid

Our diagnostics are free: a technician arrives at your home within 60 minutes anywhere in the city, inspects your Daewoo boiler, and gives you the cost of work after the check. First, he listens to how the burner runs, reads the error code from the display, and compares it with how the components actually behave — circuit pressure, ignition, flow temperature. Then he takes apart the component the symptom points to and confirms the cause on site. The technician gives the price after diagnostics because the same error can require both flushing the heat exchanger and replacing the sensor — the scope of work depends on the actual cause, not the code on the screen. Ask the technician which component he checked and why he ruled out the others: that explanation shows whether he really knows the brand. If you need a service center for Daewoo gas boilers in Almaty, our technician handles diagnostics and repair.

Repair at home or at the service center

We service Daewoo boilers at the customer's home or at our service center — the format depends on the breakdown: some components are replaced on site, others require disassembly at the workshop. On-site visits cover work that needs access to the burner, sensors, pump, and electronics — these are removed and replaced without dismantling the casing. The heat exchanger that needs pressure flushing and the control board with soldering are taken to the workshop, then returned and reinstalled. We are the direct contractor — our own staff of technicians, not an intermediary: the same service that came out is responsible for the work, so you don't have to find someone to blame between subcontractors if something goes wrong. Before work starts, ask what the technician does on site and what he takes away — that way you know in advance how long the boiler will be left unattended.

1-year warranty and what to do if the problem comes back

We give a 1-year warranty on labor and parts: if after service your Daewoo boiler shows the same error again, the technician comes back and finds the cause. A warranty on parts is just as important as on labor: some parts fail due to their own lifespan, and then the replacement is covered by warranty, not by the owner. On a repeat visit, the technician compares the new error code with what he fixed and checks related components — a recurring symptom often points not to the wrong part but to a cause upstream in the circuit. Keep the description of the work performed: it shows which component was replaced and what the warranty covers. You can pay via Kaspi QR, Kaspi Red, bank card, cash or bank transfer for companies, and the technician gives the price after free diagnostics.

Daewoo gas boiler fixes for safe heating

Troubleshooting a Daewoo boiler comes down to a few practical rules: from decoding the error code to reacting to the first symptoms of a fault. These takeaways help owners make decisions without unnecessary costs.

  • Diagnostics first, replacement second: repairing a Daewoo gas boiler starts with decoding the error and checking components, not with replacing parts at random.
  • A symptom is a signal: a burner going out, pressure drop, or cold water while heating works point to a specific component, not the whole unit.
  • The brand's weak spots are known: the heat exchanger, burner, pump, and control board should be checked first.
  • Early reaction costs less: the faster an owner reacts to a symptom, the more often flushing or adjustment is enough instead of replacing a component.
  • Maintenance extends service life: scheduled component checks reduce the risk of an emergency shutdown during the heating season.

20brands

Besides Daewoo, we repair other gas boiler brands in Almaty

We work with boilers of various brands, each with its own page describing components and common faults.

We also repairWe also repairTECH SERVICE09

Besides Daewoo gas boiler repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before Daewoo gas boiler repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp