Open until 19:00+7 (775) 030 02 94Call a technician
Tech Service technician next to a gas boiler

Navien Gas Boiler Repair in Almaty

Free diagnostics, a technician arrives within 60 minutes anywhere in the city. 1-year warranty on labor and parts.

  • Free diagnostics
  • Arrival within 60 minutes
  • 1-year warranty

Our own technicians4 to 20 years of experience

Ruslan Ts.Damir M.Dilmurat S.Dima

Repair prices

  • Diagnostics0 ₸
  • Fan replacementfrom5 500 ₸
  • Temperature sensor replacementfrom6 000 ₸
  • Control board replacementfrom6 000 ₸
  • Gas valve replacementfrom7 000 ₸
All prices
2ГИСЯours4,97 898 reviews
2GIS · Google · Yandex · order database
Common faultsCommon faultsTECH SERVICE02

Common Navien gas boiler faults in Almaty

Below are typical symptoms and their likely causes. The technician identifies the exact cause after free diagnostics.

PricesPricesTECH SERVICE03

How much Navien gas boiler repair costs in Almaty

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Fan replacementparts not included

1–2 hours

from5 500 ₸

Temperature sensor replacementparts not included

1–2 hours

from6 000 ₸

Control board replacementparts not included

1–2 days

from6 000 ₸

Gas valve replacementparts not included

1–2 hours

from7 000 ₸

Three-way valve repairparts not included

1–2 hours

from7 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Navien gas boiler repair in Almaty

Radiators cold, humming and overheating

1 visittime

from 10 500 ₸cost

Problem
The Navien boiler heated water, but the radiators remained cold, while the boiler hummed and went into an overheating error.
What we did
The technician shut off the valves, drained the water from the boiler, replaced the circulation pump, then refilled the system and checked circulation and radiator heating.
Result
The radiators heated evenly, the humming and overheating error disappeared, and circulation was restored. 1-year warranty on labor and parts.
I want the same
Ariston gas boiler: radiators cold, humming and overheating — after repairBeforeAfter
01 / 04
All repairs
TECH SERVICE mobile technician with a tool case

How Navien gas boiler repair works at your home in Almaty

From request to inspection — five clear steps.

  1. Requeston the day of request

    You describe the symptom and boiler model; the technician clarifies details by phone or WhatsApp.

  2. Technician Visitwithin 60 minutes

    The technician arrives anywhere in the city, inspects the boiler, and records the connection conditions.

  3. Parts Approvalon site

    The technician shows the removed part and explains why it is being replaced.

  4. Post-Assembly Checkafter assembly

    The technician starts the boiler and demonstrates operation in heating and hot water modes.

  5. Inspection and Warrantyafter repair

    The technician starts the boiler and checks the operation of components. 1-year warranty on labor and parts.

Leave a request
TechniciansTechniciansTECH SERVICE05

Our home appliance repair technicians in Almaty

The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

  • 8 technicians in Almaty
  • 8–12 years of experience in the department
  • Article author Ruslan Ts., 9 years of experience
Technician repairing a gas boiler at a customer’s home
Field technician at a customer’s home

The department has 8 specializations — they are listed on the technicians' cards.

01 / 08
Ruslan Ts., washing machine and refrigerator repair technicianexperience9 years

Ruslan Ts.

Washing machine and refrigerator repair technician

Damir M., general household appliance repair technicianexperience12 years

Damir M.

General household appliance repair technician

Dilmurat S., field technician for washing machine and refrigerator repairexperience10 years

Dilmurat S.

Field technician for washing machine and refrigerator repair

Dima, expert washing machine repair technicianexperience8 years

Dima

Expert washing machine repair technician

Nikita M., field refrigerator repair technicianexperience8 years

Nikita M.

Field refrigerator repair technician

Oraz, senior washing machine repair technicianexperience8 years

Oraz

Senior washing machine repair technician

Radik T., dishwasher repair technicianexperience11 years

Radik T.

Dishwasher repair technician

Rustem T., washing machine repair technicianexperience9 years

Rustem T.

Washing machine repair technician

We reply during working hours

Book Navien gas boiler repair in Almaty

The technician is matched to the boiler brand: we work with Navien and other brands from the list. Technician experience from 4 to 20 years.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (775) 030 02 94
Customer reviewsReviewsTECH SERVICE06

Reviews of Navien gas boiler repair in Almaty

Богдан С.Order No. 938445 · 24 March 2026

ours

Друг посоветовал, у него похожая история была. Нужен был ремонт газовой колонки — обратился сюда. Проблема — не зажигается. Поставили новую деталь: мембрана. По цене не скажу, что дёшево, но справедливо. Заявку приняли по телефону, перезвонили через десять минут. Вернули в тот же день, всё функционирует.

Repair: gas boiler repair in

Айгуль К.Order No. TS-3515 · 6 September 2024

ours

Пробовал найти мастера в своём районе, но все были заняты. Сдал в ремонт: газовая колонка. Повод для визита: не зажигается. Нагрев в норме, посторонних звуков нет.

Repair: gas boiler repair in

Айгуль К.Order No. TS-1267 · 15 July 2023

ours

Жалоба простая: не греет. Отдельно скажу про мастера: Дамир М — спокойный, без лишней суеты. Проверили при мне, показали, что всё держит.

Repair: gas boiler repair in

Ержан А.Order No. 34055 · 18 May 2023

ours

Позвонил в три места, здесь единственые назвали цену сразу. Починили и дали гарантию на месяц.

Repair: gas boiler repair in

Бакыт Ж.Order No. TS-2209-675 · 27 December 2022

ours

Смотрел, у кого есть запчасти на такую модель. Разобрали, посмотрели: плата. Сделали аккуратно, следов разборки не видно)

Repair: gas boiler repair in

Ерасыл Б.Order No. TS-2202-231 · 2 April 2022

ours

Симптом был очевидный: не зажигаеться. Никита М приехал в тот же день, хотя был конец смены. Уже полгода — ни одного сбоя.

Repair: gas boiler repair in

Станислав К.Order No. TS-2176 · 8 March 2020

ours

Первое, что заметил: не греет. Никита М всё объяснил и не пытался впарить лишнее. Техсервис в Алматы, если что, вот их адрес — не пожалел. Работает как раньше, придирок нет

Repair: gas boiler repair in

Алмас Д.Order No. TS-1908-726 · 14 November 2019

ours

Симптом был очевидный: ошибка. Дамир М помог выбрать, без навязывания. Пользуюсь ежедневно, вопросов нет

Repair: gas boiler repair in

Максим Ю.Order No. 58907 · 7 March 2019

ours

Пробовал найти мастера в своём районе, но все были заняты. Повод для визита: не зажигается. Гудит ровно, не греется, всё как надо

Repair: gas boiler repair in

Руслан Д.Order No. 2017-6867 · 24 April 2017

ours

Проблема — течёт. Никита М помог выбрать, без навязывания. Проверил дома — всё на месте, ничего не забыли.

Repair: gas boiler repair in
See all reviews
Questions and answersQuestionsTECH SERVICE07

Questions about Navien gas boiler repair in Almaty

Didn’t find the answer? Message us on WhatsApp.

Ask a question
How do I repair a Navien gas boiler?

Repair starts with free diagnostics: the technician identifies the faulty component and agrees on the work with you. Then they replace or clean the part and test the boiler under load. It's dangerous to tamper with the gas section yourself.

What should I do if my Navien boiler isn't heating hot water?

If the boiler heats the radiators but doesn't produce hot water, the three-way valve may be faulty, the secondary heat exchanger may be clogged, or a sensor may have failed. Check that the hot water tap isn't closed. For an accurate repair, call a technician.

Why does the pressure in my Navien boiler keep dropping and I have to top up the water?

A pressure drop usually points to a leak in the heating system or a faulty expansion tank. Worn seals are also possible. The technician will check the circuit and the tank to fix the cause, not just top up the water.

Why does the burner in my Navien boiler keep going out?

The burner may go out due to an ignition failure, clogged nozzles, or problems with the flame sensor. Sometimes the cause is the flue or the gas line. Diagnostics will show which component needs repair.

How dangerous is a yellow flame in a Navien boiler?

A yellow flame indicates incomplete gas combustion and can be dangerous. The cause is often a clogged burner or disrupted air supply. You shouldn't run the boiler with such a flame — it needs a technician's inspection.

Can I clean the Navien heat exchanger myself, or is it better to call a technician?

It's better to leave flushing and cleaning the heat exchanger to a technician: the unit needs to be disassembled, flushed, and checked for leaks after reassembly. You can only check that the boiler is unplugged and the valves are closed. The specialist will do the rest.

Repair guideArticleTECH SERVICE08

Navien Gas Boiler Repair in Almaty by Tech Service

Author: TECH SERVICE editorial team

Published
Updated

Tech Service repairs Navien gas boilers in Almaty as a direct provider: our technician arrives at your home within 60 minutes or takes the boiler in for repair at our service center. Diagnostics are free, we give a 1-year warranty on labor and parts, and our technicians have 4 to 20 years of experience.

Navien Boiler Error Codes and What They Mean

A code on the display isn't a verdict—it's a hint about which component to start with. Here's how to read such a mark, which component it points to, and why it comes back after a fault is fixed.

How to Read an Error Code on a Navien Display

A code on a Navien display is an alphanumeric mark that lets a technician immediately identify the component: the E series points to a specific circuit, not to a breakdown of the entire boiler. Behind the code is the control board, which reads signals from the flame sensor, pressure switch, and NTC sensors and records the first deviation from the norm. For the owner, this means one thing: the code narrows the search to one or two components but doesn't name the part to replace. Troubleshooting starts with decoding the code and ends with a measurement on a specific element. If the code repeats, it makes sense to order Navien gas boiler repair in Almaty from technicians who check the component with measurements, not just by the code. The same code can appear for different reasons, so decoding without checking the component is only half the job; a technician confirms the cause with a measurement, not by the code.

Common Navien Codes and Which Component They Point To

Code on DisplayComponent It Points ToWhat the Technician Checks
Ignition errorflame sensor, gas valvespark, ionization, gas supply
Pressure switch errorpressure sensor, draft fandraft, flue tightness
Overheat errorNTC sensor, heat exchangercontamination, circulation
Flame errorionization electrodeelectrode contamination, contact

What to Do If the Error Returns After Repair

If after service the Navien shows the same code again, we don't replace the part again—we go back to the cause: we check the component that failed and its operating conditions. A repeat code is often linked not to the replaced element but to what caused it—a clogged heat exchanger, pressure surges in the circuit, or unstable power to the control board. That's why on a repeat visit we first run diagnostics free of charge and only then outline the next steps. We provide a 1-year warranty on labor and parts, and a repeat visit for our work is covered by it. In our practice, a returning fault almost always means that the first time we fixed the symptom, not the source—for example, we replaced the electrode without cleaning the heat exchanger.

Why a Navien Boiler Doesn't Heat Water, Cycles, or Shuts Down

Behind every Navien complaint is a specific component. We break down common symptoms and show which components a technician checks when the equipment behaves differently than it should.

Boiler Works for Heating but Doesn't Provide Hot Water

If a Navien heats radiators but doesn't provide hot water, we first check the three-way valve and the secondary heat exchanger in a dual-circuit model. A stuck stem gets lodged in the 'heating' position—radiators are hot, but cold water runs from the tap. The secondary DHW circuit becomes clogged with scale from hard water and stops transferring heat. The symptom is often mistaken for a control board failure, though the culprit is a stuck mechanism or a scale-clogged component. Cleaning and restoring the valve solves the problem without replacing electronics. Before disassembly, the technician checks the system pressure: at a low reading, the stem won't switch either, and flushing won't help. We start Navien gas boiler repair in Almaty with this check—it cuts out unnecessary work and shows whether a component needs replacement or just restoring the valve's travel.

Boiler Frequently Turns On and Off

  • Short cycling due to power: the unit is set to maximum, but the house loses less heat — the burner keeps shutting off and relighting.
  • Clogged heat exchanger: scale buildup prevents heat transfer, the sensor detects overheating and shuts off the burner prematurely.
  • NTC temperature sensor: a failed sensor sends incorrect readings, and the controls operate on a false signal.
  • Mode settings: correct power and hysteresis eliminate frequent starts without replacing parts.
  • Gas valve: unstable fuel supply causes uneven flame and ignition failures.
  • Circuit circulation: air pockets and a weak pump slow down heating, and the controls restart the burner.

Pressure drops or the burner goes out

  • Pressure drops: we check the expansion tank, pressure switch, and circuit tightness.
  • Burner goes out: we inspect the flame sensor, ionization electrode, and gas supply.
  • Yellow flame: we check the gas path and combustion settings.
  • Humming and vibration: we diagnose the circulation pump and fan.
  • Gas valve: clogging or seat wear causes unstable ignition and flame failure under load.
  • Pressure switch: with incorrect pressure readings, the controls block ignition and the boiler won't start.

How we repair Navien gas boilers

We show the path from request to a working boiler: who arrives, which components they check, and why a direct contractor is different from a dispatch middleman. Below are the three steps Navien owners go through.

From request to technician visit in 60 minutes

After your request, a Tech Service technician arrives at your home within 60 minutes anywhere in Almaty, or if it's more convenient, we accept the boiler at our service center. Our own person comes to you, not a middleman's dispatcher: this eliminates the markup and extra approval loops between the request and the actual work. The vehicle carries tools for Navien gas equipment, so it's clear right on site whether an on-site visit is enough or a deep teardown of a component is needed. Boiler intake at the service center is chosen when the breakdown requires disassembling the heat exchanger or control board — such operations are inconvenient and unsafe to do in an apartment. The same technician handles the unit from the call to the post-repair check, so you don't have to repeat the symptoms to a new person. When requesting, specify the model and the error code on the display — this speeds up parts selection and reduces time on site.

What free diagnostics includes

  • Electronics: we check the control board and sensors for errors.
  • Gas path: we inspect the valve, burner, and draft.
  • Hydraulics: we check the heat exchanger, pump, and circuit pressure.
  • Outcome: after diagnostics, the technician names the cause and the cost of work.

Why a direct contractor is better than a middleman

Tech Service is a direct contractor with its own technicians, so you pay for the work, not for an aggregator's dispatch markup. Each boiler is assigned a technician with 4 to 20 years of experience, and that same person is responsible for the result, not forwarding the request to a subcontractor. A middleman puts an extra link between you and the actual technician, and that link is what most often leads to vague responsibility for the outcome. Checking a contractor is simple: ask who exactly will come and whether they are on staff. If the answer is "a technician will come, don't worry" without a name or service affiliation — you're talking to a dispatcher. Our technician introduces himself and shows what he brought before starting work.

Preventive maintenance for Navien boilers

Preventive maintenance extends component life and prevents the very symptoms mentioned above: short cycling, pressure drops, excess gas consumption. Here's why regular boiler maintenance matters, what it includes, and how often to do it.

Why service your Navien every year

We recommend annual Navien servicing because scale and dirt on the heat exchanger and burner gradually reduce efficiency and cause short cycling and excess gas consumption. Over the heating season, a layer of mineral salts from tap water builds up on the inner walls of the heat exchanger, while soot and dust collect on the burner. As a result, heat transfers to the water less effectively, the burner stays on longer, and gas is used less efficiently. The owner notices the increased consumption on their bills before they notice it in the unit's operation. Preventive maintenance of Navien boilers removes these deposits before they can clog the passages. Regular maintenance is cheaper than an emergency call-out not so much in money as in time without hot water and heating in the middle of the season.

What Navien maintenance includes

  • Heat exchanger and burner: we remove dirt and scale from the surfaces through which heat is transferred to the water.
  • Gas circuit: we check the valve, draft, and tightness of connections for leaks.
  • Hydraulics: we inspect the circulation pump, system pressure, and expansion tank condition.
  • Electronics: we check the sensors and board, and read the controller's error log.
  • Settings: we set the boiler's operating modes for the specific home and load.
  • Wear inspection: we note parts that are starting to wear so they can be replaced before they fail.

How often maintenance is needed

The optimal interval for gas boiler maintenance is once a year, preferably before the heating season when the load on the unit hasn't yet increased. During the warm months without servicing, scale in the heat exchanger hardens into a dense layer, and by winter the boiler enters peak operation with clogged passages. If the unit runs on hard water or the home is dusty, the interval should be shortened: dirt accumulates faster under such conditions. A sign that it's time to call a technician early is increased gas consumption without changes in habits and more frequent short cycling. Another signal is that the boiler takes longer to heat water at the same pressure. Beginning deposits on the heat exchanger can be heard as a characteristic noise during heating.

What you can do yourself and what to leave to a technician

Some tasks are within the owner's ability, but the fuel supply circuit and electronics require a specialist. We draw the line between the zones and explain why this line matters for safety.

Where the user's zone ends

The user's zone is the circuit pressure, filters, and external inspection; anything related to the fuel supply circuit and the board requires a technician. The owner can check the pressure gauge, top up the circuit to the operating mark, clean or replace the water inlet filter, and inspect the casing for leaks and dust. The valve, burner, heat exchanger, and control board are the specialist's territory: they require disassembling the combustion chamber, checking connection tightness, and adjusting combustion with a gas analyzer. Interfering with the circuit yourself is not a saving but a safety risk, and afterwards it's harder for a technician to restore the original settings. In my opinion, it's cheaper to stop at inspection and not touch components sealed by the factory.

Why you shouldn't ignore a yellow flame

  • Color instead of blue: a steady blue flame is normal; yellow and orange tongues indicate combustion problems.
  • Soot on the sight glass: soot and carbon deposits confirm that the air-fuel mixture is off.
  • A sign before an error code: the flame changes color before the automation shuts down the boiler and shows a fault.
  • What to do immediately: shut off the fuel supply, don't try to readjust the burner, and call a specialist.
  • What the technician checks: pressure, burner cleanliness, draft, and connection tightness.

When to call a technician

  • Repeating error code: the unit indicated on the display by the control system needs diagnostics.
  • Burner goes out or flame is yellow: we check the gas train, burner, and combustion settings.
  • Pressure won't hold: we inspect the expansion tank, circuit, and possible leak points.
  • Work on the board and valve: restoration of the Navien boiler control board and valve is handled by a qualified technician.
  • First symptoms: the sooner you call a technician, the more often the fix involves restoring the unit rather than replacing it.

Warranty and trust in the service

Warranty and technician experience are the two factors a Navien owner uses to decide who to trust with their equipment. Here we explain exactly what our warranty covers, why a technician's experience affects the outcome, and how payment works.

What the 1-year warranty covers

  • Technician's work: we give 1 year on the completed repair — if the fault returns due to our work, we fix it.
  • Parts: a replaced part has its own 1-year term, separate from the work obligations.
  • One term for everything: both the work result and the installed part remain the service center's responsibility for a year.
  • What this means in practice: if a breakdown recurs, you don't have to figure out whose area it is — it's handled under a single warranty.
  • Why this matters for Navien: the control board and gas valve are expensive, and parts coverage protects you from repeat costs.

Why technician experience matters

  • 4 to 20 years of experience: our technicians have different backgrounds, but each has worked with gas equipment for years and knows how Navien systems behave.
  • Accurate code interpretation: on Navien, an error code often points to a unit indirectly, so an experienced technician checks the whole chain rather than replacing the first part on the list.
  • Symptom vs. cause: the technician tells one from the other — doesn't replace the control board if a sensor is at fault, and doesn't touch the gas valve if the problem is in the heat exchanger.
  • Fewer unnecessary replacements: when the diagnosis is accurate, the owner doesn't pay for parts unrelated to the breakdown.

How to pay for the work

The technician quotes the price after free diagnostics, and you can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. First, the specialist comes to your home, checks the Navien boiler, and identifies the cause of the fault. Then they give you the cost of work and parts, and only after you agree do they start the repair. This sequence lets you compare the offer with others before work begins, not after it's done. Diagnostics remain free whether or not you proceed with the repair, so you can have the boiler inspected calmly and with no obligation. When you contact the Navien gas boiler service center, you know upfront how payment works and at what stage the amount appears. In my view, this transparent "diagnostics → price → repair" order removes the owner's main fear — that the sum will appear only after the boiler is taken apart, when it's awkward to decline the service.

Navien gas boiler repair smart approach

Diagnosing Navien breakdowns comes down to a few key points: which component to start with during diagnostics, where the line for DIY intervention is, and why preventive maintenance is cheaper than an emergency call.

  • Error code: the message on the display narrows the search to a specific component, but it must be confirmed by measurement — don't replace a part based on the code alone.
  • Symptom: no hot water, short cycling, and pressure drops are caused by different components — the three-way valve, sensors, heat exchanger, or gas path.
  • Who does the work: a direct technician arrives personally and is accountable for the result; a middleman between the owner and the specialist only lengthens the chain.
  • Prevention: annual servicing prevents short cycling and excess gas consumption, and neglected scale costs more than a scheduled cleaning.
  • Gas path and circuit board: these tasks are entrusted to a technician — DIY intervention here is dangerous and irreversible.

20brands

Besides Navien, we repair other gas boiler brands in Almaty

Our technicians work with Navien boilers and other brands that have dedicated pages. Choose your brand and go to the description of services.

We also repairWe also repairTECH SERVICE09

Besides Navien gas boiler repair, we fix other equipment in Almaty

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE10

Worth reading before Navien gas boiler repair in Almaty

Leave a review

Choose a platform — the TECH SERVICE page will open.

2ГИС2GISGoogle MapsЯYandex Maps
Send a review with photos on WhatsApp