experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (775) 030 02 94Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.
Our own technicians4 to 20 years of experience




Repair prices
Below are frequent symptoms and likely causes; the technician will pinpoint the exact cause during free diagnostics.
refrigerant leak, compressor, thermostat
from10 000 ₸
door seal, defrost sensor, drain
from6 000 ₸
thermostat, sensor, refrigerant leak
from9 000 ₸
drain, door seal, hoses
from6 000 ₸
compressor, fan, cabinet vibration
from9 500 ₸
start relay, compressor, thermostat
from7 500 ₸
hinges, door seal, cabinet misalignment
from6 000 ₸
door alignment, hinges, cabinet misalignment
from6 000 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1 visittime
from 10 000 ₸cost

BeforeAfter5 steps

Five steps from request to checking the freezer after repair.
You submit a request, and the technician clarifies the symptom and the Ardesto freezer model.
The technician arrives within 60 minutes anywhere in the city, bringing their own tools.
The technician checks the compressor, thermostat, sensors, and door seal, and identifies the cause.
The technician starts the freezer and makes sure it cools properly and the symptom is gone.
The technician cleans the work area and packs up the replaced parts.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Leave a request — diagnostics are free, and we accept payment by Kaspi QR, Kaspi Red, card, cash or bank transfer.

Warranty question? Call us
+7 (775) 030 02 947 898 reviews of repairs at TECH SERVICE in total
Молдир С.Order No. ZK-2024 · 5 November 2025
oursСначала просто глючило, потом стало хуже: не морозит. Нужна была замена: компрессор. Нагрев в норме, посторонних звуков нет.
Ирина Т.Order No. 2025-4396 · 27 May 2025
oursПроблема — не морозит. Отдельно скажу про мастера: Дильмурат С — спокойный, без лишней суеты. Сделали и забыл про проблему!!
Дмитрий Л.Order No. 50692 · 15 April 2025
oursБольше всего напрягало: намерзает. Никита М приехал в тот же день, хотя был конец смены. Шум пропал, работает мягко.
Бекзат Т.Order No. ZK-2024/208 · 20 September 2024
oursСмотрел, у кого есть запчасти на такую модель. После выходных обнаружил: намерзает. Позвонил, описал проблему, сказали привозить — посмотрят в тот же день. Разобрали, посмотрели: компрессор. Назвали 31 500 сразу, в конце сумма не изменилась. Спасибо за работу. Сделали и забыл про проблему.
Ольга М.Order No. 2024-9476 · 7 March 2024
oursДолго откладывал ремонт, потом всё-таки собрался. Скажу прямо: ожидал худшего. Больше всего напрягало: не закрывается. Нужна была замена: компрессор. Мастер сразу сказал, что к чему, без размытых формулировок. Сказали 18 500, я согласился без торга. В общем, доволен. С тех пор ни разу не подвёл.
Артём К.Order No. 689913 · 20 May 2023
oursПробовал найти мастера в своём районе, но все были заняты. Нужен был ремонт морозильника — обратился сюда. Больше всего напрягало: наледь. Нужна была замена: уплотнитель. Ответили быстро, не пришлось ждать на линии. Отдал 11 000, и это вместе с работой. Не понравилось, что нужно оставлять предоплату. Однозначно да. Уже полгода — ни одного сбоя.
Светлана Д.Order No. 816006 · 27 April 2021
oursТехника на гарантии уже не была, так что выбор был свободный. Проверили на всех режимах, всё чётко.
Павел Ш.Order No. ZK-2020/383 · 20 September 2020
oursНужен был счёт и чек, у нас техника на балансе организации. Техника работала годами, а тут — не закрываеться. В списке работ — компрессор. Могли бы взять больше, но взяли по-божески. Проверили на всех режимах, всё чётко
Асель Ж.Order No. 2019-1766 · 2 June 2019
oursДильмурат С возился с этим дольше, чем планировал, но довёл до конца. Нужна была замена: компрессор. Проверил дома — всё на месте, ничего не забыли
Артём К.Order No. TS-1607-579 · 8 June 2016
oursПробовал найти мастера в своём районе, но все были заняты. Ремонт морозильника — вот с этим и пришёл. Повод для визита: не закрываеться. Никита М перезвонил, когда всё было готово. Договорились на утро, к девяти уже был свободный мастер. Смета совпала с итогом, что редкость. Сказать, что доволен — ничего не сказать.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionYes, the technician fixes most issues on site: replacing the relay, sensor, thermostat, door seal, and recharging refrigerant are done at your home. The freezer is only taken to the service center for complex work on the compressor or evaporator.
With a refrigerant leak, the compressor usually hums continuously, but there's no cooling and the condenser stays only partially warm. With compressor wear, you hear clicking and it shuts off quickly; an on-site diagnosis will pinpoint the exact cause.
Most often this points to a faulty start relay or the compressor itself failing to start. Don't turn the freezer on repeatedly in quick succession to avoid burning the winding, and call a technician to check the start unit.
There can be several reasons: worn door seal, faulty thermostat or sensor, or refrigerant leak. It depends on the model, so the exact cause can't be determined without an on-site diagnosis.
Water on the floor can cause a short circuit and damage the flooring, and running a faulty unit speeds up compressor wear. It's best to unplug the freezer and call a technician to fix the cause of the leak.
If the body and compressor are intact, repair usually costs less than buying a new freezer. The decision depends on the model and the type of fault: after a free diagnosis, the technician will tell you which option is more cost-effective in your case.
Tech Service repairs Ardesto household freezers in Almaty: our technician arrives at your home within 60 minutes or we fix the freezer at our service center. Diagnostics are free, with a 1-year warranty on labor and parts, and technicians have 4 to 20 years of experience. The technician provides the cost after diagnostics.
An Ardesto freezer most often stops freezing due to one of five components. Let's break down which symptom points to what, what the code on the display means, and how to guess the fault in advance from the problem description.
If the compressor hums but the freezer is warm, our technician first checks the refrigeration circuit for refrigerant leaks and compressor startup. A hum with no cold almost always means the motor is running idle: there's not enough refrigerant in the circuit, pressure drops, and no cold is produced. The technician inspects the pipe joints and the charging port, checks the windings and start relay, and measures pressure in the circuit. Only after that do they draw a conclusion about the compressor itself — a faulty motor is replaced, and if there's a leak, the circuit is sealed and recharged with refrigerant. In my opinion, the worst mistake a owner can make in this situation is to wait until the motor burns out from running without refrigerant. First they look for the leak, and only then assess the condition of the compressor: this sequence saves you from replacing an expensive component.
The code on the Ardesto freezer display points to a specific component, and our technician deciphers it by model and series, not just by the combination of symbols. The control panel outputs a signal from the electronic module, temperature sensors, or defrost system, so the same symbols on different series lead to different parts. The technician cross-checks the combination with the table for the specific model, checks the temperature sensor readings and the condition of the module, and tests the circuits. The same code on different Ardesto series can lead to different components, so the decoding is always verified against the model — this saves unnecessary replacements. In practice, remember the main thing: don't rush to replace the board based on a single code; first give the technician the exact model name from the nameplate.
Food thaws and ice grows on the walls when heat removal is disrupted or warm air enters the freezer — the thermostat, temperature sensor, door seal, or defrost system are to blame. Frost buildup is most often caused by a worn door seal: it lets warm air in, moisture settles on the walls and turns into ice. If ice builds up on the evaporator and the freezer stops freezing in cycles, the defrost system is checked — the defrost heater, timer, and fan. Food thawing without ice usually points to the thermostat or temperature sensors: the setpoint drifts, and the compressor doesn't turn on in time. Ice buildup and thawing rarely come together for the same reason: frost comes from the seal and defrost, while warm food comes from the thermostat and sensors. So when you call, describe exactly what's happening — this narrows down the search.
| Symptom | Likely component | What we check |
|---|---|---|
| Hums but doesn't freeze | Refrigeration circuit | Refrigerant leak, compressor startup |
| Clicks and turns off | Start relay | Compressor startup, relay |
| Won't hold temperature | Thermostat, temperature sensor | Sensor readings, setpoint |
| Ice builds up | Door seal, defrost | Door fit, defrost cycle |
| Error on display | Control module, sensor | Code by model and series |
A freezer doesn't always need to be transported — let's break down when work is done at home and when it's taken to the service center, and how to prepare the appliance for the specialist's visit.
Our technician usually repairs Ardesto freezers right at your home in Almaty, and a call-out anywhere in the city takes 60 minutes. On-site Ardesto freezer repair in Almaty covers typical failures — a faulty thermostat, temperature sensor, compressor start relay, or a clogged capillary tube. The specialist checks the unit on the spot without taking it out of your kitchen. Large appliances shouldn't be tilted or moved: during transportation, oil from the compressor can get into the circuit, which is a separate breakdown. So on-site work also reduces the risk of damaging the circuit during transport. In my opinion, this is convenient for the owner — the freezer stays in place, and you don't have to move food to another fridge for a few days.
We take the appliance to the service center when the control module needs repair or when working on the circuit requires special conditions. The electronic control module needs soldering and load testing, and replacing the compressor or vacuuming the circuit are service-center jobs. The specialist suggests the format after free diagnostics: first they identify the faulty unit, and only then decide where it's more convenient and safer to fix it. Tech Service performs work both at the client's home and at the service center — the technician comes directly, without intermediaries or movers. In practice, most requests are resolved on-site, and transportation is needed less often than the breakdown description might suggest. If the technician recommends the service center, it means the unit really requires conditions you don't have in your kitchen.
Let's break down what free diagnostics includes, what the cost consists of, and what warranty applies to the work and parts — so you understand the process before the technician arrives.
During free diagnostics, our technician checks the compressor start, temperature sensor readings, the circuit for refrigerant leaks, and the defrost system, then names the cause and cost. The start check shows whether the motor winding is alive and whether the start-protection relay engages. The sensors show whether the freezer correctly reads the temperature in the freezer compartment and whether the controller is accurate. The circuit is inspected for oil traces and pressure-tested if a refrigerant leak is suspected. The defrost unit is tested separately: a faulty heating element, timer, or sensor causes ice buildup and false error codes. The inspection is free regardless of whether repair is needed — this lets the owner decide without pressure and extra costs, and the technician doesn't have to guess the cause blindly.
How much Ardesto freezer repair costs depends on the faulty unit and the required part, and the technician names the exact amount after free diagnostics. Replacing the start-protection relay costs less than working on the refrigeration circuit: the latter requires leak detection, vacuuming, and refrigerant charging. The final price is also affected by which part failed — a temperature sensor, defrost timer, or compressor. The same complaint "not freezing" can lead to either a relay replacement or circuit work — so naming a price before inspection would be guessing. The technician records the cause after checking, shows the faulty unit, and explains how the amount was calculated. Ardesto freezer repair cost stays transparent this way: you pay for specific work and a specific part, not for an "average repair".
We give a 1-year warranty on labor and parts, and after fixing the issue we make sure the freezer is freezing as it should. Testing under load means the unit runs through a full freeze and defrost cycle, not just powers on for a few minutes. The warranty covers both the replaced component and the work performed — if the same problem comes back within a year due to our fault, we take care of it under warranty. Keeping the parts warranty separate from the labor warranty matters because some faults don't show up right away but appear weeks later under load: for example, a faulty relay or sensor can fail after dozens of on/off cycles. That's why the warranty covers both the replaced part and the work done — it makes it easier to pinpoint the cause if you contact us again.
Some issues you can fix without a specialist — here are a few checks that take a couple of minutes and help you decide whether you need a technician at all or it's just a settings problem.
Clicking followed by shutdown usually points to a start relay that's preventing the compressor from starting. The relay is mounted on the motor housing, and when its contacts wear out it breaks the circuit right after power is applied: you hear a click, the motor jerks and stops. Another scenario is a seized compressor, where the winding is fine but the piston group won't turn; then the sound repeats after a pause of a few minutes. A third possibility is the thermal protection tripping due to overheating or a voltage drop in the mains. If the freezer goes silent after the click and tries to start again after a pause, it's best to stop repeated start attempts — this way the relay and the motor itself don't wear out further. Testing the relay with a multimeter takes a technician a minute, and replacing the part restores startup.
If the freezer won't turn on after defrosting, check the power, the thermostat setting, and let the freezer dry completely before restarting. Moisture on contacts, terminals, and temperature sensors after washing is a common reason the unit won't start: the electronics see incorrect readings and block the compressor from starting. After defrosting, the thermostat often stays in the 'off' position or gets knocked to the minimum cold setting — set it again. A faulty temperature sensor distorts the temperature readings on the display, and thawing continues even with the motor running. Moisture on contacts and sensors is a frequent cause of a silent freezer, so don't rush to turn it on: 24 hours of drying saves you a technician visit. One more thing: if the freezer has been defrosted for more than a day, let the compressor sit turned off for a couple of hours before starting, so the oil returns to the crankcase.
Here's how a direct contractor differs from a middleman and what signs show that a technician really knows Ardesto freezers rather than taking on any appliance.
Tech Service is a direct service provider: our own technician comes to you, not a middleman who passes the request to a third party. Our specialist takes your request, visits your address in the city, and fixes the problem — there's no dispatcher-relay between you and the technician. Our technicians have 4 to 20 years of experience, so they identify the faulty component on the spot instead of describing the symptom for someone else to handle. An aggregator works differently: it collects requests and distributes them among third-party teams, and the quality depends on who exactly gets the job. With a direct provider, the same service whose technician was at your place is responsible for the work and the warranty — you don't have to figure out who's accountable for the result. Ask before the visit who exactly will come and who provides the 1-year warranty on labor and parts — that's how you spot a middleman right away.
A technician who knows Ardesto decodes the error code by model and series and immediately names the likely component instead of guessing. On freezers of this brand, the electronics display a code that shows which circuit failed: a sensor, the control module, or the compressor's starting equipment. Our technicians with 4 to 20 years of experience start by reading that code and checking it against the series, not by taking the freezer apart. Brand expertise shows in the questions: the technician asks for the model, series, and when the symptom appeared, not just "what's not working." If the person on the other end of the line doesn't ask for the model or the code on the display, they'll probably look for the cause by trial and error. Our diagnostics are free — that's where you can see how accurately the technician pinpoints the component by the error code before changing anything.
Diagnosing an Ardesto freezer malfunction comes down to a few practical points that help you assess the situation before the technician arrives. The technician gives the cost of repairing an Ardesto freezer after a free diagnostic — no price is quoted before the inspection.
29brands
We service Ardesto freezers and other brands that have dedicated pages on this site.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
If your refrigerator isn't cooling but the light is on, the cause is usually one of the components in the cooling circuit: the compressor, thermostat…
10 December 2025 · 13 minutes read
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read












