experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (775) 030 02 94Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics, final price after inspection.
Our own technicians4 to 20 years of experience




Repair prices
Symptom and likely cause — what the technician checks first during free diagnostics.
heating element, thermostat, or temperature sensor
from5 500 ₸
plug, outlet, or switch
from5 500 ₸
hinges, seal, or misalignment
from4 000 ₸
overheating or impact
from6 500 ₸
fan or motor mount
from7 500 ₸
bulb, socket, or wiring
from5 000 ₸
thermostat or temperature sensor
from5 500 ₸
stuck contacts or timer
from7 500 ₸
The table shows prices for Gefest oven repair: the "from" labor cost excluding parts and the timeframe. The technician confirms the final total before any work begins.
1 visittime
from 11 500 ₸cost

BeforeAfter5 steps

Five steps from request to checking the appliance after repair.
You describe the symptom, the technician confirms the model and schedules a visit.
The technician confirms the model, connection type, and symptom to bring the right parts.
Discuss what to clear in the kitchen and whether access to the outlet and water supply is needed.
The technician starts work on site during the same visit, payment after the work is done.
The owner receives a completed list of work performed and warranty terms.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Describe the symptom and your Gefest oven model — the technician will confirm details and arrange a convenient visit time.

Warranty question? Call us
+7 (775) 030 02 947 898 reviews of repairs at TECH SERVICE in total
Татьяна Б.Order No. TS-2509-349 · 17 April 2025
oursТанысым осы жерді мақтап, кеңес берді. Алдымен интернеттен іздедім, кейін таныстарым осы жерді ұсынды. Ұсақ ақауларды да тегін жөндеп берді. Бағасын алдын ала келістік, соңында өзгерген жоқ. Жұмыс сапасы жақсы, артық шуы жоқ. Диагностика тегін болды, бұл жағы жақсы. Мастер ақауды түсіндірді, қажетсіз нәрсе таңбады. Екінші рет хабарласуға тура келді, бірақ кінә оларда емес. Ұсынамын, текке ақша алмайды.
Алмас Д.Order No. 2024-6592 · 14 April 2024
oursЖалоба простая: не закрывается. Отдельно спосибо мастеру — Дамир М, терпения ему хватило. Проверили на всех режимах, всё чётко.
Алия Ш.Order No. TS-9585 · 25 September 2023
oursС чем пришёл: не закрываеться. Радик Т объяснил причину так, что понял даже я. Ребёнок уже проверил на прочность, держится.
Зарина Ш.Order No. ZK-2023/252 · 3 August 2023
oursДруг посоветовал, у него похожая история была. Честно говоря, доверяю больше тем, кто говорит по делу. С чем пришёл: не держит температуру. Приехал без записи, приняли как есть. Вышло дешевле нового, что логично. Поменяли: термостат. Спасибо, выручили. Сделали аккуратно, следов разборки не видно!!
Гаухар Н.Order No. 2023-8447 · 2 July 2023
oursПроблема — не закрываеться. Отдельно скажу про мастера: Дамир М — спокойный, без лишней суеты. Сделали и забыл про проблему
Диана М.Order No. 20086 · 12 November 2021
oursЖалоба простая: не держит температуру. Радик Т всё объяснил и не пытался впарить лишнее. Ребёнок уже проверил на прочность, держиться.
Гульмира С.Order No. 587992 · 17 February 2021
oursБыло важно, чтобы сделали до выходных — гости, то-сё. Проблема — не греет. Пользуюсь ежедневно, вопросов нет.
Нурлан Б.Order No. 32723 · 19 April 2020
oursПробовал найти мастера в своём районе, но все были заняты. Приняли, выдали квитанцию, всё по-человечески. Вернули в тот же день, всё функционирует!!
Максат О.Order No. TS-1812-104 · 14 June 2018
oursБольше всего напрягало: не закрывается. Радик Т честно сказал, что менять, а что ещё походит. Крутит ровно, без рывков!!
Аида Т.Order No. TS-2212 · 17 November 2017
oursПрочитал кучу отзывов, половина — реклама, но тут вроде живые. Жалоба простая: не держит температуру. Пользуюсь ежедневно, вопросов нет.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionCheck whether the outlet has power and whether a breaker has tripped in the panel. If power is fine, check the position of the mode selector and thermostat — sometimes the issue is there rather than in the heating element. After that, a technician needs to run diagnostics.
The error code points to a specific component: a temperature sensor issue, overheating, or an electronics fault. The decoding depends on the model, so give the technician the code when you book — they'll tell you the likely cause and prepare the needed parts.
If the bottom heat works but the top doesn't, the top heating element has most likely burned out or there's a bad connection in its circuit. The thermostat more often affects overall heating. The technician will pinpoint the exact cause after diagnostics.
Noise and a stopped convection fan usually mean worn motor bearings or a jammed fan blade. Less often, the motor winding is at fault. The technician will check the fan and replace the assembly if needed.
It depends on the condition of the hinges: if they're worn or deformed, they're replaced; if the mounting has loosened, adjustment is sometimes enough. The technician will remove the door, assess the play, and select hinges for the Gefest model. After replacement, they'll check that the door closes tightly.
Most often the cause is the thermocouple: it stops holding the valve open, and the gas supply cuts off. Less often, the gas valve itself or a clogged burner is to blame. Leave gas oven repair to a technician.
Tech Service repairs gas and electric Gefest ovens in Almaty: our technician comes to your home or the work is done at the service center. Diagnostics are free, arrival within 60 minutes across the city, and a 1-year warranty on labor and parts. The technician quotes the price after diagnostics.
Most often, a Gefest oven stays cold because of a heating element, thermostat, or convection fan. Let's break down how to narrow it down to a specific component based on external signs before a technician even arrives.
Our technician starts by checking the power supply and heating circuit: in electric Gefest models, the culprit is usually a burned-out heating element or a tripped safety switch; in gas models, it's a lack of ignition. The top heating element is responsible for upper chamber heating, the bottom one for browning, and failure of one isn't always immediately noticeable: the dish browns on top but stays raw at the bottom. The mode selector and control board are checked after the heating elements, since their failure is less common. If the panel lights up but the chamber stays cold, the issue is almost always the heating element or thermostat, not the electronics, so don't rush to replace the board. Gefest oven repair in Almaty by Tech Service technicians begins with circuit testing—this eliminates half of false diagnoses in a couple of minutes.
If only one heating mode works, we check both heating elements and the temperature sensor separately: a dead top element with a working bottom one is almost always the element itself, not the thermostat. The thermostat regulates the chamber temperature based on sensor readings, and its health is only visible dynamically: the technician observes how quickly the chamber reaches the set mode and holds it. The bottom heating element may be intact but provide weak heating due to a burnt coil inside the casing—externally, the part looks fine. When both elements heat but the temperature fluctuates, the cause is the thermostat or sensor, and their readings are compared with actual chamber heating. Our service specialists measure temperature at two points to avoid confusing a tired thermostat with a working but inaccurate sensor.
Display symbols narrow down the issue to a specific component, but decoding depends on the series and type of oven. Here's how to read the indicators and what they mean in practice.
The display on a Gefest oven points to a specific component—heating, temperature sensor, or control electronics—but the exact decoding depends on the series and model type. The screen shows a number that the control board uses to log a deviation: temperature not reached within the allotted time, sensor signal loss, or a fault in the heating circuit. In electric series, the indication comes from the electronic module; in gas models, from the ignition and flame control unit. The same number on a gas and electric model can mean different things, so when requesting service, it's important to provide the model and oven type, not just the number. Write down the code and model from the nameplate—with this pair, the technician can immediately prepare the right tools and narrow down the list of parts to check.
| Code group | Which component it points to | What the technician checks |
|---|---|---|
| Heating error | upper or lower heating element | element integrity and power circuit |
| Sensor error | temperature sensor, thermostat | readings vs. actual heating |
| Electronics error | control board, switch | control signals and contacts |
| Gas circuit error | thermocouple, gas valve | flame presence and stability |
A one-time glitch after a power surge isn't a breakdown in our book — you reset it and see if the signal comes back; if the indicator returns, the component needs to be measured. Reset by cutting power for a few minutes or using the button combination for your series, then start the oven to heat up and watch the display. If the same number comes back within one or two cycles, the control board is picking up a deviation again: the temperature sensor is off, the heating element isn't heating enough, or a contact has burned. A repeated signal after a reset almost always means a real faulty part, and it's not worth putting off diagnostics — the component can take its neighbors with it. Tech Service provides free diagnostics before repair: a technician arrives in the city within 60 minutes, measures the component, and gives you the cost of work after the check.
Gas and electric Gefest ovens have a different set of components and different diagnostic logic. Let's look at how the cases differ and what the owner should check before the technician arrives.
In an electric Gefest we check the heating elements, thermostat, temperature sensor, and control board; if turning it on trips the breaker, the cause is more often a short in the heater or wiring. Heaters are divided into upper, lower, and convection — each is tested separately for resistance and for a short to the body. The thermostat and temperature sensor are checked against the actual heating of the chamber, and the control board handles modes and indication, so it's checked after the power components. Repair of Gefest ovens in Almaty for the electrical part is most often related to heating and electronics, so we start diagnostics with the power components. The circuit breaker in the panel trips from a leak or short in the oven circuit, and restarting only adds load to the wiring. A tripping breaker is a sign of a problem in the circuit, not a weak breaker, so it's better not to turn the component on again before measuring.
In a gas Gefest that goes out after a few minutes, we first check the thermocouple and gas valve: they are what keeps the flame going. The thermocouple monitors the flame in gas models — when heated, it generates a signal that holds the valve open. If that signal disappears, the valve cuts off the gas supply and the burner goes out. We check the jets for clogging: a blocked hole gives a weak or uneven flame, and sometimes a pop during ignition. When the flame goes out only in the oven but the stovetop burners work, the issue is in the oven circuit, not the gas supply to the house — this narrows diagnostics and saves time finding the cause. Moreover, the thermocouple and valve are replaced as a pair if the signal is unstable: a worn part takes a working one with it.
Some work is done right in the kitchen, while some requires service center conditions. We'll show you how a visit works and which faults can really be fixed without removing a built-in oven from the cabinet.
At home, we perform free diagnostics and replace accessible components — heating elements, thermostat, temperature sensor, door seal, hinges, and glass — without removing a built-in oven from the cabinet. The heating element is mounted on the back wall of the cavity, the thermostat and sensor are behind the control panel, and the seal and hinges are removed from the door side. The technician arrives with their own tools and checks each component in sequence: power, heating, sensor readings, and cavity tightness. For most replacements, the appliance doesn't need to be removed — access is available from the door and back panel right in the kitchen. In my view, that's why a home visit covers most requests: you don't need to unplug the stove, disassemble the cabinet, or clear a passage.
We send a Gefest oven to the service center when there are no conditions at home for working with electronics or when the control board needs replacement, which requires a test bench. The board is responsible for mode selection, timer, indication, and communication with sensors, and it is tested on a bench with a simulated load — that can't be done in the kitchen. Damaged traces, burnt power components, and failed relays are replaced after diagnosing the entire circuit, not just a single part. Electronics are more often checked and restored at the service center rather than at home, so the technician tells you right during diagnostics whether the appliance will be taken away. This approach saves time: the client doesn't wait for a second visit and knows in advance whether the equipment will leave the kitchen.
Our diagnostics are free: a technician arrives within 60 minutes anywhere in the city, checks the components, states the cause and the cost of work, and only then does the repair begin. First, they inspect the cavity, check heating in each mode, test the thermostat and sensor, and assess the condition of the wiring and terminals. Then they show you the fault they found and explain which component will be replaced and which can still serve. The cost is quoted after diagnostics because it depends on the specific part, not on the oven model as a whole. If the work can be done at home, it starts right after approval; if a test bench is needed, the appliance is taken away and they explain what operations will be performed. The warranty on labor and parts is 1 year, and payment is accepted in any convenient way.
To make the visit quick and the result predictable, let's go over the warranty terms, how we work with parts, and how to prepare the oven for the technician's arrival.
We provide a 1-year warranty on labor and parts: if the fault returns after repair, the technician will come again and sort it out under warranty. This applies to both electric and gas models — only the list of components checked again differs. According to our technicians with 4 to 20 years of experience, the thermostat and heating element are the most common repeat issues: these components operate under constant heat load. A warranty on a part separately from labor matters because a new part can fail on its own — in that case, it is replaced rather than blamed on 'wear.' When making a warranty claim, keep a description of the symptom at hand — that way the technician will know in advance if it's the same component and bring the right one.
Parts are selected for the specific model and component after diagnostics: the technician identifies exactly what has failed and picks the part for the Gefest oven series. Heating elements, thermostats, temperature sensors, door hinges — each series has its own mounting dimensions and connectors, so components are never fitted by guesswork. We quote the price after free diagnostics, once it's clear which component needs replacing. The fault is confirmed first, and only then is the part ordered — that way you don't end up replacing a part that was actually working. The heating element is checked with a continuity test, the thermostat by whether it trips at the set temperature, and the sensor by multimeter readings. In my view, this step is what most often saves the owner unnecessary expense: picking parts by symptoms without testing leads to replacing working components.
Diagnosing Gefest breakdowns comes down to a few practical points — from reading the symptom to preparing for the technician's visit. These points help you describe the problem more accurately.
41brands
Our technicians service Gefest ovens and other brands that have dedicated pages on this site.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your oven isn't working, first check the outlet, the circuit breaker in the panel, and the selected mode, then assess the symptom: not heating…
3 October 2025 · 12 minutes read
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read












