experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 13 16Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Diagnostics are free.
Our own technicians4 to 20 years of experience




Repair prices
Below are common symptoms and their likely causes. The technician names the exact cause after free diagnostics.
thermal fuse, power cord, or board
from3 000 ₸
heating element, temperature sensor, or heating relay
from6 000 ₸
temperature sensor, overheating, or board
from7 500 ₸
heating element short, moisture, or wiring
from6 000 ₸
seal, valve, or bowl overflow
from4 500 ₸
latch, hinge, or body misalignment
from3 500 ₸
ribbon cable, touch sensor, or control board
from4 500 ₸
scratches, chips, or non-stick layer
from500 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1–2 hourstime
from 5 000 ₸cost

BeforeAfter5 steps

Five steps: from the call to testing the multicooker under load.
Describe the symptom and model, and the technician will clarify the details.
A technician arrives within 60 minutes anywhere in the city.
The technician chooses how to disassemble the body based on the specific model's design.
Work begins after the price and part are approved.
Check the lid, bowl, and power cord before use.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Have the model and symptom ready in advance so the technician brings the right tools and parts for the visit.

Warranty question? Call us
+7 (778) 021 13 167 898 reviews of repairs at TECH SERVICE in total
Роман З.Order No. TS-2606-177 · 26 February 2026
oursПробовал найти мастера в своём районе, но все были заняты. Уже не верил, что это можно починить. Основная жалоба — не греет. Дамир М честно сказал, что менять, а что ещё походит. Нужна была замена: плата. Оплатил картой, чек дали. Проверил дома — всё на месте, ничего не забыли
Сабина Г.Order No. TS-2304-162 · 30 May 2023
oursПроблема — ошибка. Дамир М снял деталь, показал износ, вопросов не осталось. Внешне как новый, если не считать мелкой царапины)
Сауле Н.Order No. 26101 · 10 November 2022
oursПовод для визита: ошибка. Радик Т не стал навязывать дорогую запчасть, поставил нормальную. Включил, проверил, работает.
Елена К.Order No. TS-2207-933 · 15 October 2022
oursПозвонил знакомому, он раньше работал в сервисе, посоветовал этих. С чем пришёл: пригорает. Проверил дома — всё на месте, ничего не забыли.
Андрей П.Order No. TS-7140 · 8 February 2021
oursПрочитал кучу отзывов, половина — реклама, но тут вроде живые. Повод для визита: ошибка. Пользуюсь ежедневно, вопросов нет!!
Даулет С.Order No. 800415 · 11 September 2020
oursБольше всего напрягало: пригорает. Отдельно скажу про мастера: Дамир М — спокойный, без лишней суеты. С тех пор ни разу не подвёл.
Алия Ш.Order No. TS-2009-981 · 13 August 2020
oursДолго откладывал ремант, потом всё-таки собрался. Утром работало, днём сломалось, вечером я уже искал сервис. Первое, что заметил: не включается. Поставили новую деталь: плата. Назвали 16 500 сразу, в конце сумма не изменилась. Сделали и забыл про проблему.
Гаухар Н.Order No. ZK-4300 · 8 March 2018
oursПрочитал кучу отзывов, половина — реклама, но тут вроде живые. Проверил дома — всё на месте, ничего не забыли!!
Ляззат К.Order No. TS-2561 · 4 September 2017
oursХотел сначала вызвать мастера на дом, потом передумал. Обидно было, техника не старая совсем. Основная жалоба — не включаеться. Поменяли: тэн. Назвали 5 500 сразу, в конце сумма не изменилась. Договорились на утро, к девяти уже был свободный мастер. Работает как раньше, придирок нет
Томирис Ж.Order No. ZK-2016/446 · 14 January 2016
oursВыбирал по отзывам в 2ГИС, времени на эксперименты не было. Ещё утром всё работало, а к вечеру — ошибка. Мастер приехал на дом, всё посмотрел при мне. Сказали 4 500, я согласился без торга. Поставили новую деталь: термодатчик. Пришлось пару раз позвонить самому, чтобы узнать статус. Второй месяц — полёт нормальный.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionUsually the control panel itself, the ribbon cable, or the board is to blame—it depends on the model. A technician will determine during free diagnostics what needs replacing: the touch sensor, the ribbon cable, or the entire board.
Yes, the bowl can be replaced separately from the body if the coating is worn or food starts sticking. The heating element is left untouched if it's working properly.
Yes, it's a sign of a short circuit in the power supply, and continuing to use the appliance is risky. Unplug it and call a technician to check the wiring and the board.
Yes, such faults can be fixed—usually the cause is in the wiring, the heating element, or the board, depending on the model. Before the technician arrives, unplug the multicooker and don't plug it back in.
The technician does a lot right at your place: replaces the valve, power cord, gasket, sensors, fuse. Control board repairs and complex cases are done at the service center, where the appliance is taken after inspection.
The error code points to a specific component—sensor, heating, or board—and its meaning depends on the model. It can be fixed: the technician reads the code during free diagnostics and replaces the faulty part.
Tech Service repairs Tefal multicookers in Almaty: our technician comes to your home within 60 minutes or the repair is done at our service center. Diagnostics are free, 1-year warranty on labor and parts, and you can pay with Kaspi QR, Kaspi Red, card, cash, or bank transfer. The technician gives you the price after diagnostics. We fix standard household models and Tefal pressure multicookers.
A multicooker that doesn't respond to the button or shows a code on the display are two different scenarios. Let's go over what you can check yourself and when you need a technician.
In our experience, "won't turn on" usually comes down to two causes — a tripped thermal fuse or a faulty control board, and you can only tell them apart during diagnostics. The thermal fuse is a consumable protective element: it opens the circuit when the temperature inside the housing exceeds the threshold, and after that the device is completely dead. The control board behaves differently: the screen may light up, show a signal, but heating won't start. The technician tests the thermal fuse circuit, checks the heating element and the board traces, and the results show which part to replace. If you need Tefal multicooker repair in Almaty, we handle these cases during free diagnostics. We don't replace the thermal fuse blindly: first we find out why it tripped, otherwise the device will shut off again after replacement. Diagnostics are free, and we give a 1-year warranty on labor and parts.
A multicooker heats up but doesn't cook, or shuts off mid-program — different components are behind this. Here's how symptoms and causes connect, so you understand what the technician checks.
If the bowl heats up but the program won't start or the food stays raw, we check the temperature sensor and the heating control circuit — there is heat, but the control board isn't getting correct data. The sensor sits at the bottom of the housing under the bowl and sends the actual temperature to the control board; if it shifts, the contact breaks or oxidizes, the signal gets distorted, and the controller won't start the program and keeps the heat below the set level. The heating element itself may be fully functional, yet the Tefal multicooker behaves as if the board is faulty. In our practice, this symptom is often mistaken for a heating failure, even though the heating element itself is working — replacing the heating element won't solve the problem in this case, and diagnostics start with testing the sensor and the connector on the board. If you need Tefal multicooker repair in Almaty, a technician will check the sensor and the heating circuit on site.
When the unit overheats and shuts off on its own, we first check the temperature sensor and the thermal fuse, and only then assess the condition of the heating element. The thermal fuse is a one-time protection: when the threshold is exceeded, it breaks the circuit and cannot be reset, so after it trips, the Tefal multicooker simply won't turn on. If the protection is intact, the technician checks the sensor: its readings are compared with the actual heating of the bowl, and a difference of a few degrees is enough to disrupt the program. Shutting off is a protective reaction, not the fault itself: the technician looks for what pushed the unit beyond its operating range and replaces the Tefal multicooker temperature sensor if it's giving false readings. On induction models, the coil and its mounting are also checked.
| Symptom | What we check first | Heating type |
|---|---|---|
| No heating at all | Heating element or induction coil | Heating element / induction |
| Heats but doesn't cook | Temperature sensor | both |
| Overheats and shuts off | Sensor and thermal fuse | both |
| Error on display | Control board | both |
| Steam escapes through the lid | Steam release valve, sealing ring | both |
| Food burns | Bowl, coating | both |
The owner is the first to notice steam, burning and smoke. Let's break down which symptom points to the valve, which to the bowl, and when it's time to unplug the appliance.
If steam comes out where it shouldn't and the lid hisses, we check the steam release valve and the perimeter seal — both parts are responsible for airtightness. The valve regulates pressure release during cooking modes, and the elastic gasket keeps steam from bypassing the chamber. On Tefal multicookers, this seal hardens, cracks and stops fitting snugly over time, so steam escapes around the edge instead of through the designated channel. The owner notices that the dish takes longer to cook, the lid jumps up, or condensation remains at the joint. During inspection, we remove the gasket, check how the valve sits and whether its channel is clean from scale and food residue. A worn seal is replaced along with checking the valve: an old part will again direct pressure the wrong way. If you're interested in Tefal multicooker repair price, the technician gives it after free diagnostics.
In our experience, burning is more often caused by the bowl and its non-stick coating rather than the heating element — the condition of the bowl is checked first. The coating wears off from metal spatulas, abrasive sponges, and sudden temperature changes, and food sticks and burns locally on damaged areas. The heating element may still work properly and provide even heating across the entire bottom. The technician checks the heating element for even heating and inspects the bowl for chips and dark spots. If the bottom is deformed, the bowl doesn't sit tightly on the heater, and heat is distributed unevenly — this causes burnt spots in one area. With worn coating, a new heating element won't solve the problem: heating remains the same, and food will continue to stick.
Some work is done right at your home, some requires the service center. Here's how the process works and what determines the format.
Yes, we also work with Tefal multi-cookers and pressure cookers — they have an additional pressure unit that is checked separately from heating. Besides the bowl and heating element, the technician inspects the steam release valve, the lid sealing ring, and the locking mechanism. In pressure cookers, these parts wear out faster than others: the ring loses elasticity, the valve gets clogged, and pressure doesn't hold. When the complaint is "doesn't cook under pressure," the lid is checked first, not the board. The valve and ring are the most common culprits, so when the complaint is "doesn't hold pressure," they start with those. The technician quotes the cost of repairing a Tefal multi-cooker after free diagnostics. The format of work for a multi-cooker pressure cooker is determined after free diagnostics — some faults of the pressure unit are fixed on-site, the rest require the service center.
The cost of repair depends on the component and the scope of work. Let's break down what the sum consists of and why it's quoted after diagnostics, not over the phone.
The cost of repairing a Tefal multicooker depends on the nature of the fault, the part needed, and the scope of work. The technician gives you the exact price after a free diagnostic. The control board, heating element, and sensors each involve different sets of operations: sometimes you just need to remove the lid and replace a consumable, while other times you need to disassemble the body and solder. The layout of the specific Tefal model also affects the final price: pressure cookers and compact versions have components arranged differently. At Tech Service, we identify the fault during the inspection and only then calculate the cost of replacement and the part. The same symptom on different Tefal models may require different parts, so an estimate from the internet often doesn't match reality. Tell the technician the model and symptom in advance — this will save time during diagnostics.
Before diagnostics, we don't know which component has failed, so the price can only be determined after inspection. The symptom "not heating" can equally point to a temperature sensor, a thermal fuse, or a heating element, and each is replaced differently. The technician checks the circuit at your home or takes the device to the service center if board soldering is needed. We provide free diagnostics and based on its results quote the price for the replacement and the part, with a 1-year warranty on both. If a technician quotes a price blindly, it almost always changes once the device is opened. It's more transparent to say upfront that the figure will come after diagnostics. That way you don't pay for guesswork and you see exactly what you're paying for, not just a nice number over the phone.
A warranty is part of the job, not a bonus. Here's how it works, what it covers, and what to do if the fault returns after the technician's visit.
We provide a 1-year warranty on labor and parts installed during the repair of your Tefal multicooker. The term is the same for the control board, the heating element, and the sensor — whether the component was replaced at your home or at the service center. The technician who performed the work records the replaced components, so if you contact us again, we can see which parts were installed and when. Over a year, the device goes through hundreds of heating and cooling cycles — that's when a hidden defect that wasn't noticeable during the first inspection usually shows up. One year is the guideline we give for labor and parts: if a component or solder joint lasts longer, it typically works until natural wear. The warranty covers both the part and the labor, meaning that if the fault recurs, the same service center will deal with the cause. The technician quotes the cost of repairing a Tefal multicooker after a free diagnostic — the price of labor and parts is discussed before the repair begins.
It's easier to think of a Tefal multicooker malfunction as a sequence of steps rather than a reason to panic. Below are guidelines to help you make the right decision on the first breakdown and avoid making it worse.
24brands
We repair Tefal and other multicooker brands that have their own pages on the site.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
Washing machine error codes are self-diagnostic codes that point to a specific component: drain, water fill, heating, motor, or door lock.
29 January 2026 · 13 minutes read












