experience9 yearsRuslan Ts.
Washing machine and refrigerator repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 13 16Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
Free diagnostics, technician arrives within 60 minutes anywhere in the city. 1-year warranty on labor and parts.
Our own technicians4 to 20 years of experience




Repair prices
Below are eight typical symptoms and their likely causes. The exact cause will be determined during free diagnostics.
heating element, thermostat, temperature sensor
from4 500 ₸
pump, steam valve, scale in channels
from5 500 ₸
seals, hose, tank crack
from6 500 ₸
hard water, infrequent cleaning
from7 500 ₸
clogged nozzle, weak pump
from8 500 ₸
scale on heating element, pump wear, loose mounting
from7 500 ₸
code points to a specific component
from4 500 ₸
power supply, fuse, circuit board
from6 500 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1–3 business daystime
from 11 500 ₸cost

BeforeAfter5 steps

Five steps from request to post-repair check.
Describe the symptom and model — the technician will prepare tools and parts.
The technician brings tools and common parts for the specified model; address and time are agreed upon when you place the request.
The technician explains the scope of disassembly and access to the component: which panels will be removed and what not to touch before arrival.
The technician unplugs the device, drains remaining water, and protects floors and furniture from steam and splashes.
The technician returns removed parts and explains which modes and water filling to avoid until the next service.
The home appliance repair department in Almaty has 8 technicians with 8 to 12 years of experience.

The department has 8 specializations — they are listed on the technicians' cards.
experience9 yearsWashing machine and refrigerator repair technician
experience12 yearsGeneral household appliance repair technician
experience10 yearsField technician for washing machine and refrigerator repair
experience8 yearsExpert washing machine repair technician
experience8 yearsField refrigerator repair technician
experience8 yearsSenior washing machine repair technician
experience11 yearsDishwasher repair technician
experience9 yearsWashing machine repair technician
We reply during working hours
Tell us your city and preferred time — the technician will arrange a visit and inspect the device on site.

Warranty question? Call us
+7 (778) 021 13 167 898 reviews of repairs at TECH SERVICE in total
Азамат Е.Order No. TS-2503-290 · 23 January 2025
oursОбращаюсь не первый раз, поэтому есть что сказать. В тех сервис привёл знакомый, у него тут чинили ноут!!
Камила А.Order No. 110653 · 6 January 2025
oursОбращаюсь не первый раз, поэтому есть что сказать. Техника на гарантии уже не была, так что выбор был свободный. Ребята из techservice работают давно, это чувствуется.
Максим Ю.Order No. ZK-2022/591 · 31 December 2022
oursНашёл по отзывам, решил попробовать. Прочитал кучу отзывов, половина — реклама, но тут вроде живые. Вернусь, если приспичит.
Ильяс Н.Order No. 421968 · 14 December 2022
oursДолго откладывал, но пришлось обратиться. Гудит ровно, не греется, всё как надо.
Индира П.Order No. ZK-3479 · 25 August 2020
oursПервый раз сюда, до этого чинился в другом месте. Приняли быстро, объяснили, что и как будет. Всё объяснили простыми словами. Отношение нормальное, без высокомерия. Сделали и забыл про проблему!!
Ксения И.Order No. 2019-7693 · 28 September 2019
oursДолго откладывал, но пришлось обратиться. Если что — обращусь снова. Приняли быстро, объяснили, что и как будет.
Нурлан Б.Order No. TS-1802-623 · 14 October 2018
oursОбращался в сервис по совету знакомых. Достойно. Работали аккуратно, ничего не поцарапали.
Алмас Д.Order No. ZK-2874 · 7 August 2018
oursПозвонил, когда техника встала окончательно. Рустем Т перезвонил, когда всё было готово. Диагностика заняла минут двадцать. Цена не изменилась ни на тенге. Спасибо, выручили.
Тимур А.Order No. TS-9952 · 3 August 2018
oursБыла срочная поломка, нужен был мастер сегодня. Цена имела значение, но и гарантия тоже. Единственное — ждал запчасть четыре дня. Проверили при мне, показали результат. Запчасть нашли без проблем. Спасибо за работу.
Владимир Н.Order No. TS-1706-491 · 23 September 2017
oursИскал сервис с гарантией, чтобы не переделывать. Друг посоветовал, у него похожая история была. Проверили на всех режимах, всё чётко.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionUsually the heating element, thermostat, or temperature sensor is to blame — they suffer from scale and voltage spikes. Less often the issue is in the power circuit. Free diagnostics will show exactly what failed.
This is how a steam supply valve or worn seals behave, sometimes the cause is scale inside the boiler. It's better not to use the appliance in this condition: drops can ruin fabric. Call a technician to disassemble and repair it.
With scale, the appliance hisses and crackles, steam comes out in bursts, and water runs out faster than usual. A broken heater often doesn't heat at all or trips the breaker. A technician can tell for sure after inspecting the components.
It depends on the model: on detachable irons, the valve, sensor, or hose can be replaced without touching the base. If the iron is built into the housing, the system is repaired as a whole. The technician will assess the design during inspection.
Yes, Gorenje codes are model-specific and point to a particular component: heating, steam supply, sensors, or electronics. The technician checks the code against service documentation and confirms the cause during diagnostics.
Yes, the work performed and parts installed are covered by a 1-year warranty. If the same issue comes back during this time, the technician will find the cause and fix it.
Tech Service repairs Gorenje ironing systems in Almaty: a technician comes to your home within 60 minutes anywhere in the city, or you can have the appliance fixed at our service center. Diagnostics are free, there's a 1-year warranty on labor and parts, and the technician gives you the price after diagnostics. We work as a direct provider, with no middlemen.
Most requests for Gorenje ironing systems involve heating, steam generation, and water supply. Below we break down which symptom points to which component and how a technician narrows down the search.
Most often, the lack of heating and steam is caused by the boiler heating element, thermostat, or thermal fuse, and we check these first during diagnostics. The heating element brings the liquid to operating temperature, while the thermostat keeps it within the set range. The thermal fuse is an emergency safeguard: when overheated, it breaks the circuit and must be replaced after tripping. Scale builds up on the heating element and hinders heat transfer, so the unit turns on but heats noticeably weaker. On models with electronic control, the same symptoms are often caused by the control board, which fails to supply power to the heating unit. If the unit turns on but stays silent, don't rush to replace it — limescale buildup produces the same picture as a broken heater, and only testing the component can tell them apart. Gorenje ironing system repair in Almaty starts with such diagnostics of the heating unit.
Leaking from the bottom and wet steam usually point to the pump, valve, or worn seals, and we check the entire chain. The pump doses liquid from the tank into the boiler, and the valve opens and closes the outlet on command from the board. Seals and gaskets prevent leaks from the housing: over time, the rubber hardens from heat and starts to leak. The level sensor monitors the amount of liquid in the boiler, and when contaminated with scale, it sends a wrong signal — leading to overflow or, conversely, dry running. We inspect the hose and connections for tightness, because a crack in the steam line produces the same wet steam as valve wear. A droplet in the steam is an early sign that is cheaper to fix before moisture reaches the control board.
| Symptom or code | Likely cause | What we check | Component |
|---|---|---|---|
| No heating, heating error | Heating element shorted or open | Continuity of heating element and temperature sensors | Boiler |
| No steam, supply error | Pump or valve | Liquid supply and outlet | Pump, valve |
| Leak from bottom | Seals, connections | Gaskets and hose | Housing, steam line |
| Breaker trips | Heating element or wiring short | Insulation and iron-to-base cable | Heating element, cable |
| Level error | Sensor, scale | Cleanliness of sensor and boiler | Level sensor |
| Won't turn on | Control board, power | Power supply and board | Control board |
To understand the logic of breakdowns, it helps to know what components the unit consists of and how an ironing system differs from a steam generator and a regular iron.
The core of an ironing system is a boiler with a heating element, a water supply pump, a level sensor, a valve, and a control board, connected by a steam line to the iron. Water from the reservoir flows through the pump into the steam generator boiler, where the heating element brings it to operating condition, and the level sensor ensures the heater doesn't run dry. The valve doses the supply on command from the control board, and the steam line carries the flow to the iron's soleplate. The control board reads sensor data and turns on heating or blocks operation if readings deviate. Understanding this chain explains why the same symptom "no steam" can point to the pump, the valve, or scale in the boiler — the entire line needs checking, not just one component.
Gorenje has its own layout of the boiler, board, and sensors, so we disassemble the specific model rather than following a generic template. The control board here is connected to the water level sensor and valve in a single circuit, and a failure of one element changes the behavior of the entire system. The steam generator boiler in these appliances is not always disassemblable, so we first check the pump and valve, and only proceed to the heater after confirmed diagnostics. The same external symptom in different brands leads to different components, and a universal approach here more often results in unnecessary replacements. Our technician arrives with a tool set for the specific model and quotes the cost of work after free diagnostics — when the actual faulty component is identified.
The client learns the cost and timeline of Gorenje ironing system repair only after diagnostics, and the work itself follows a clear chain from request to warranty.
After a request, a technician arrives at your home within 60 minutes anywhere in the city, and diagnostics of the ironing system is free. We take requests by phone or email — just provide the model of the appliance and briefly describe what happens when you turn it on. The visiting technician brings tools and checks the heating element, pump, level sensors, and steam supply valves on site, so the unit doesn't have to be transported back and forth. Diagnostics is free regardless of whether you agree to the repair or not. In my view, half of the disputes about a breakdown are resolved at this stage: the owner sees which component has failed and understands the logic of further work. Before the visit, it's worth having the model ready and describing what actions trigger the symptom — this saves time during disassembly.
After diagnostics, we agree on the list of work with you, and we perform the repair itself at home or in the service center if a deeper disassembly of the component is needed. The technician explains which parts need replacement and which can be restored, and in what order the disassembly and fault detection of components goes — from the boiler and steam generator to the electronic control board. Some faults are fixed on site: descaling, gasket replacement, valve cleaning. If tank soldering or board work is required, the appliance is taken to the service center where there are conditions for precise reassembly. The technician quotes the cost after free diagnostics, so you make the repair decision with a complete picture of the fault. In our practice, this order removes the client's main fear — that the total will be more expensive than expected.
We provide a 1-year warranty on the work performed and on installed parts, and you can pay via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies. This means that if the replaced component fails again within a year, we will return to the appliance and determine the cause — without a separate discussion about whose fault it is. The warranty on parts is especially important because some breakdowns are related to the lifespan of the parts, not the quality of assembly. After the repair, the technician briefly explains how to handle the appliance going forward: how much water to fill, how often to flush the circuit, which modes not to keep on for too long. We accept payment in cash, by card, and by transfer — whichever is more convenient for the owner. And one more thing: keep the description of the work performed, as it makes it easier to recall exactly what was replaced if a question arises later.
Some breakdowns aren't caused by faulty parts but by scale and hard water. Regular care extends the life of the appliance and reduces the risk of needing service.
With hard water, scale builds up faster in the boiler, so it's worth cleaning the appliance regularly instead of waiting for steam power to drop. In Almaty's tap water, hardness salts settle on the walls of the steam generator boiler and on the heating element in a thin layer that thickens over time. Flushing the boiler to remove scale at an early stage clears deposits without disassembling components or replacing parts. Deposits reduce heating efficiency and steam output, and at an early stage they can be removed by flushing without replacing components. The sooner the owner notices that steam has become weaker, the cheaper it is to restore the device — this is noticeable from the number of requests with advanced cases. A guideline for planning is the water condition in the home and how intensively the iron is used: with daily use by several people in the family, deposits grow faster than with infrequent use. It makes sense to tie flushing to the season when water in the city network becomes harder, rather than to calendar months.
When an appliance has been in use for several years, the question arises whether to repair or replace it, and choosing the right service provider is no less important than the fault itself.
If a single component is faulty while the housing and boiler are intact, restoration is usually justified even for appliances with a long service life. The Gorenje ironing system consists of a boiler with a heating element, a control board, a pump, and steam valves — failure of one element doesn't mean the device's life is over. Replacing the heating element or restoring the board brings the appliance back to working parameters, while a new unit costs many times more than a single part. Repairing Gorenje ironing systems in such cases costs less than buying new equipment and extends the appliance's service life. The decision should be made after diagnostics, not based on the appliance's age: some breakdowns are fixed by replacing one part. In my opinion, writing off the system early is not in the owner's interest — first a specialist checks the condition of the components and only then says whether it's worth investing in restoration. Restoring the control board in such cases is done by replacing or repairing the component, not by buying a new system.
We are a direct provider, not an aggregator: your appliance is repaired by our specialist, not by an intermediary who passes the request to a third party. This format removes an extra link between the owner and the provider: the same service that accepts the request also performs the work, and the 1-year warranty on labor and parts is issued directly. An intermediary often adds their own markup and doesn't always stand behind the quality of someone else's work. When the provider does the job themselves, responsibility for the result and warranty isn't diluted between intermediaries. In our practice, this means that if you come back about the same component, the issue is resolved under the same warranty, without correspondence between contractors. For the owner of an ironing system, it also means predictability: they deal with the person who actually handled the appliance.
Our technicians have 4 to 20 years of experience, and you can request service for your Gorenje ironing system in Almaty at any time. A technician comes to your home within 60 minutes anywhere in the city, and diagnostics are free — they give you the price after inspecting the appliance. Our team's varied experience helps with unusual cases too: a younger technician is more comfortable with electronics, while someone with many years on the job is better at assessing the boiler's mechanical parts. An experienced technician can often guess the faulty component from your description of the symptoms, which helps them bring the right part on the visit. That saves you time: fewer repeat visits and less waiting for a part, and the visit itself is scheduled by phone at a time that suits you.
Putting the symptoms, the design, and the repair process together gives the owner of an ironing system a clear picture: what's going on with the appliance and what to do next.
26brands
Our technicians repair steam generators and ironing systems from various brands. Visit the brand page for details.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your dishwasher won't drain, the most common culprits are a clogged filter or drain hose; less often, it's the pump, impeller…
24 March 2026 · 12 minutes read
A washing machine can hum for many reasons, and the first thing to figure out is when the sound appears.
20 March 2026 · 12 minutes read
If your washing machine isn't filling with water, the most common culprits are a closed valve, a clogged inlet filter screen on the hose…
20 February 2026 · 13 minutes read
If your microwave isn't heating but the light and turntable still work, the problem is usually one of the high-voltage components — the magnetron, diode…
15 February 2026 · 12 minutes read
If your refrigerator stops working, first check the outlet, the power cord, and the thermostat setting, and after defrosting let it stand for a while.
4 February 2026 · 12 minutes read
Washing machine error codes are self-diagnostic codes that point to a specific component: drain, water fill, heating, motor, or door lock.
29 January 2026 · 13 minutes read












