experience7 yearsBakdaulet E.
Game console repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 746 01 65Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.
Our own technicians4 to 20 years of experience




Repair prices
The same error can come from different components, so the cause is determined by the console's condition.
Power supply, power circuit, button
from16 000 ₸
Dust, dried thermal paste, cooler
from9 000 ₸
Laser, drive mechanism, contamination
from12 000 ₸
Overheating, storage, firmware
from5 000 ₸
Power, motherboard, APU
from16 500 ₸
Power, firmware, storage
from5 000 ₸
Storage, firmware, network
from5 000 ₸
HDMI port, cable, video chip
from37 500 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1–2 hourstime
from 8 000 ₸cost

BeforeAfter5 steps

From request to inspection — five steps.
Describe the symptom and model so the technician brings the right tools.
The technician checks the power, HDMI port, and cooling system before replacing parts.
The technician disassembles the console and checks components step by step to find the cause before replacing parts.
The technician explains which parts are chosen and what alternatives exist, and starts work after your consent.
Check power-on, disc drive operation, HDMI output, and temperature under load.
The digital device repair department in Almaty has 7 technicians with 7 to 18 years of experience.

The department has 7 specializations — they are listed on the technicians' cards.
experience7 yearsGame console repair technician
experience10 yearsSenior TV repair technician
experience10 yearsTV board repair technician
experience10 yearsElectromechanical technician
experience13 yearsAudio and DVD repair technician
We reply during working hours
Choose a convenient visit time and contact method — the technician will confirm the booking and clarify details.

Warranty question? Call us
+7 (778) 746 01 657 898 reviews of repairs at TECH SERVICE in total
Мирас С.Order No. TS-2404-313 · 5 August 2024
oursПозвонил в три места, здесь единственные назвали цену сразу. Сначала просто глючило, потом стало хуже: дрифт стика. Мастер сразу сказал, что к чему, без размытых формулировок. Заплатил 14 000, и не жалею. Поставили новую деталь: плата. Спасибо за работу. Проверили на всех режимах, всё чётко)
Гульнара Б.Order No. TS-2205-963 · 28 September 2022
oursПервое, что заметил: не заряжается. Отдельно спосибо мастеру — Дмитрий Радионов, терпения ему хватило. Прошивку не тронули, всё как было!!
Юлия А.Order No. ZK-2022/302 · 10 July 2022
oursПрочитал кучу отзывов, половина — реклама, но тут вроде живые. Сначала думал, что ерунда, но появилось: перегревается. Деталь на замену — привод. Вышло дешевле нового, что логично. Мастер сразу сказал, что к чему, без размытых формулировок. Техсервис в Алматы, если что, вот их адрес — не пожалел. Однозначно да. Вернули в тот же день, всё функционирует.
Станислав К.Order No. 138548 · 5 December 2020
oursХотел сначала вызвать мастера на дом, потом передумал. Проверили на всех режимах, всё чётко!!
Алишер У.Order No. 2020-4508 · 2 December 2020
oursПробовал найти мастера в своём районе, но все были заняты. Включил, проверил, работает.
Динара М.Order No. 64420 · 4 July 2020
oursБыло важно, чтобы сделали до выходных — гости, то-сё. Первое, что заметил: не заряжаеться. Починили и дали гарантию на месяц)
Эльмира Т.Order No. ZK-2017/245 · 11 December 2017
oursПосле выходных обнаружил: дрифт стика. В тех сервис привёл знакомый, у него тут чинили ноут. Работает как раньше, придирок нет)
Эльвира Д.Order No. 2017-1869 · 16 April 2017
oursМаксим Снегирев взялся за то, от чего другие отказались. Ответили быстро, не пришлось ждать на линии. Все разъёмы на месте, ничего не люфтит
Дмитрий Л.Order No. ZK-2017/393 · 17 January 2017
oursИскал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Ещё утром всё работало, а к вечеру — не читает диски. Мастер приехал на дом, всё посмотрел при мне. Нужна была замена: кулер. Оплатил картой, чек дали. Пользуюсь ежедневно, вопросов нет!!
Марат Ж.Order No. 55061 · 15 March 2016
oursПервое, что заметил: не читает диски. Максим Снегирев снял деталь, показал износ, вопросов не осталось. Проверил дома — всё на месте, ничего не забыли)
Didn’t find the answer? Message us on WhatsApp.
Ask a questionIf the console doesn't respond to the power button and shows no signs of life after a power surge, the power supply is usually checked first. A precise conclusion comes from free diagnostics: a technician opens the case and tests the components, depending on the model.
The blue screen of death isn't always a death sentence: the cause can be a firmware glitch, a damaged hard drive, or a chip that has come loose. Diagnostics show what exactly happened, and recovery isn't possible in every case and depends on the model.
Yes, this case is usually related to the drive itself: laser wear, a dirty lens, or a mechanical failure. The technician disassembles the unit and determines whether cleaning, adjustment, or replacement of parts is needed, depending on the model.
Yes, when overheated, the console shuts itself off to prevent the chips from burning out, and each such cycle wears out the components. It's better not to wait for a failure and show the console to a technician for cleaning and cooling system maintenance.
Some work can be done at home, such as dust cleaning and thermal paste replacement. Complex repairs of the board or drive require service conditions, so the technician will tell you what to do in your case after free diagnostics.
First, the power supply and protection circuit are checked, then the motherboard is inspected for signs of damage. Diagnostics are free, and the technician will agree on the scope of work and cost with you before the repair.

Author: Bakdaulet E.,Game console repair technician
Published
Updated
Tech Service repairs PlayStation 4 in Almaty as a direct provider: our technician comes to your home or accepts the console at the service center. Diagnostics are free, 1-year warranty on labor and parts, arrival within 60 minutes across the city. The technician provides the cost after diagnostics.
Most console repair requests involve overheating, failure to power on, and the disc drive. Let's break down what each symptom means, which components it affects, and what the technician checks.
Overheating is the most common cause of noise and sudden shutdowns: the cooling system gets clogged with dust, the thermal paste dries out, and the console goes into protection mode. The fan starts running at maximum speed, the heatsink gets covered in a thick layer of dust, and the processor and chip stop dissipating heat into the case. In such cases, PS4 repair begins with disassembly and cleaning: the technician removes the cover, blows out the heatsink, replaces the thermal paste, and verifies that temperatures are back to normal. Our technicians have 4 to 20 years of experience, so by the sound of the fan we can tell a clogged heatsink from a worn fan bearing. If the console shuts down after 20 minutes of gaming, don't delay: repeated overheating cycles accelerate wear on the processor and chip, and maintenance costs less than subsequent board repair. When the console is loud and overheating, PS4 service checks the cooling system first.
A flashing blue light and the blue screen of death (BLOD) indicate a power or motherboard failure, and they can be fixed—but only after diagnostics that separate the power supply from the board. The symptom behaves the same across different revisions: the device starts, the light flashes and goes out, no image. The technician opens the case, tests the power supply, checks the ribbon cable contacts and power on the motherboard—this rules out a cheap cause before soldering is even discussed. Diagnostics are free, and there's a 1-year warranty on labor and parts. Don't write off the console just yet: BLOD is often related to power or contacts, not a dead chip, so checking "power first, then board" saves the owner nerves and money.
If digital games work but discs don't, the problem is in the optical drive; if the console turns on but there's no picture, the HDMI port is checked, and after a power surge the power supply is the first thing to inspect. The optical drive (BD drive) wears out mechanically: the laser loses power, the disc stops spinning, and the repair comes down to cleaning the lens or replacing the unit. No image with working sound more often points to a damaged HDMI port than to the chip's video output, and a power surge primarily damages the power supply—it takes the hit. The technician arrives within 60 minutes in the city, inspects the device, and quotes the scope of work. Dust and liquid damage act slowly: the device may work for months and then fail all at once, so if liquid gets inside, it's better not to turn it on until a technician inspects it.
Each console revision has its own failure profile, and the technician adjusts the approach based on the model—let's look at what owners of the three versions complain about most.
| Revision | Common complaints | What the technician checks |
|---|---|---|
| PS4 Fat | Noise, overheating, shutdowns | Cooler, thermal paste, power |
| PS4 Slim | Overheating, disc drive, HDMI | Drive, port, airflow |
| PS4 Pro | Heating under load, BLOD | Power, board, airflow |
Under load, the Pro generates more heat than the Slim, so overheating and noise show up sooner, and maintenance should be planned more carefully. Both versions work on the same principles: a heatsink, a fan, and thermal paste between the processor and the heatsink base, but the Pro has higher power consumption and a denser board layout — the chip heats up more over the same dissipation area. Over time, the thermal paste dries out and loses conductivity, and dust clogs the heatsink fins: the fan spins up to maximum, and the console hums even in the menu. We replace thermal paste during overheating and maintenance, and also check how the heatsink sits on the chip — a tilted base causes local overheating. Heat depends not only on the model but also on conditions: a cramped shelf, a dusty room, and long sessions speed up clogging on any revision, so choose a spot for the console with plenty of air around the case.
Our console repair follows a clear process — from free diagnostics to warranty — and at every stage the owner knows how the work on the console is progressing.
During free diagnostics, the specialist checks power, cooling, the drive, and ports to pinpoint the cause and scope of work. The power supply is tested under load: a voltage drop explains sudden shutdowns and the blue light. The cooling system is inspected for a clogged heatsink and dried thermal paste — protective overheating often masquerades as a board failure. The optical drive is taken apart down to the laser if the console won't read discs, and the HDMI port is checked for broken contacts and mechanical damage after a sharp cable tug. Diagnostics aren't just a formality: without them, it's easy to replace the wrong part, so we first establish the cause and then agree on the work. PlayStation 4 repair in Almaty starts with exactly this kind of check to avoid replacing working components. A complaint about overheating is often solved with cleaning and thermal paste rather than replacing an expensive part.
After diagnostics, the specialist quotes the price and agrees on the scope of work with the client, and only then starts the job. The owner sees which components need attention now and which can be postponed without risk to the console. The cost is quoted after free diagnostics — before that, any sum would be a guess. Agreeing before work begins protects against unexpected extra charges and lets you weigh priorities: sometimes it's wiser to fix one critical fault and come back to the second later. If the owner decides to delay a particular stage, that's recorded, and no work is added without new approval. This order suits us too: both sides understand the boundaries of the task in advance. The technician explains which parts will be needed and what's included in the work versus paid separately — so the final result matches expectations.
Tech Service provides a 1-year warranty on both labor and parts, so the customer isn't solely responsible for the outcome. This period covers both the quality of soldering and the lifespan of the installed part — both obligations are handled within a single service request. The warranty on parts is just as important as on labor: if a part fails, it's resolved under the same request rather than becoming a new problem with a new bill. The technician who handled the console knows its history and doesn't start from scratch on a repeat visit. For the owner, this means service doesn't end when the device is returned. Before handing it over, ask what exactly is covered by the warranty — it makes planning future maintenance easier.
Some breakdowns are fixed right at the owner's place, while others require in-shop repair. Here's what a technician does on-site, when it's better to bring the console to the shop, and how to prepare for the visit.
At home, we handle diagnostics, dust cleaning, thermal paste replacement, and some power-related work, while complex motherboard repair requires the shop. During a visit, the technician opens the case, checks the cooling system, listens to the fan, and looks for thermal traces near the processor — these show whether the device has overheated. Preventive maintenance with new thermal paste restores normal temperature conditions if overheating hasn't yet damaged components. Some power supply issues are also resolved on-site: we check contacts, connectors, and circuit integrity. PS4 repair in Almaty often starts with a technician visit when the breakdown can be fixed without transporting the console. An on-site visit in Almaty is convenient when you don't want to haul the equipment: the technician arrives within 60 minutes anywhere in the city, and after the inspection it becomes clear whether they can handle the job or if in-shop service is needed.
Motherboard repair, optical drive replacement, and complex cases after liquid damage are performed in the shop, where there are conditions for precise work. Soldering on the board requires a stable table, lighting, and anti-static protection — you can't do it neatly while holding it on a coffee table. The drive is disassembled and replaced separately because the mechanics are sensitive to dust and misalignment. If the device has been liquid-damaged, the speed of disassembly and drying the board matters, otherwise oxidation spreads under the chips. When it's clear during the visit that in-shop service is needed, we'll say so honestly right away — the customer doesn't pay for work that can't be done on-site. This approach saves time: no need to bring the console twice and explain the symptom again.
Regular care extends the life of the console, and the DualShock 4 gamepad is repaired separately from it. Let's go over how often to clean the cooling system and typical controller breakdowns.
Dust cleaning and thermal paste replacement should be done regularly to keep your console from overheating and facing costly board repairs. Dust clogs the heatsink and fan blades, while old thermal paste between the CPU and heatsink dries out and stops dissipating heat — the chip gets hotter, the cooler spins at max, and the console gets noisy even in the menu. This procedure is a common preventive task: a technician disassembles the case, blows out the heatsink, applies fresh paste, and checks how the fan maintains speed under load. We clean the cooling system from dust and replace thermal paste — we provide a 1-year warranty on labor and parts. Maintenance is not a repair but its prevention: regular care reduces the risk of shutdowns due to overheating protection and extends the processor's lifespan. If the console is already noisy and shutting down, a technician will perform PS4 repair at your home after inspection. In my opinion, it's safer to service the console in advance than to replace failed components on the board later.
The DualShock 4 is restored separately from the console: if the gamepad won't connect or charge, the issue is often in the board, battery, or sticks. Sticks wear out from active gaming — play develops and drift occurs when the character moves on its own; the battery eventually stops holding a charge, and the board suffers from moisture or drops. We restore the controller across these three components: replace sticks and battery, repair the board, and check how the joystick connects to the console and holds charge after reassembly. The gamepad wears out faster than the console, so its repair is a common separate task that doesn't require bringing in the system itself. Just bring the controller — the console stays at home, and we provide a 1-year warranty on the work performed. Joystick servicing is a separate task that doesn't require bringing in the system itself.
We've briefly summarized what determines the outcome of console restoration: what the diagnosis depends on, why revision matters, and how maintenance saves the owner money.
12brands
We work with Fat, Slim, and Pro: we source parts for the specific revision.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your laptop screen is broken, turn the device off first, don't press on the display, and check the picture through an external monitor.
12 March 2026 · 11 minutes read
If your phone won't charge, start by checking the adapter, cable, and port, then the charging settings.
16 February 2026 · 12 minutes read
If your laptop freezes, the first thing to do is restart it and check Task Manager to see what's loading the CPU and memory.
25 January 2026 · 12 minutes read
If your phone falls in water, take it out right away, turn it off, and don't charge it.
19 January 2026 · 12 minutes read
If your phone camera isn't working, first check app permissions, clear the cache, and restart your phone — this fixes some software glitches.
24 December 2025 · 13 minutes read
If your laptop won't boot, first determine which of two states you're in: the device doesn't respond to the power button at all…
13 December 2025 · 12 minutes read












