experience7 yearsBakdaulet E.
Game console repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 746 01 65Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics.
Our own technicians4 to 20 years of experience




Repair prices
Below are typical symptoms and likely causes. The exact cause will be determined by the technician during free diagnostics.
Power supply, button, board
from16 000 ₸
Worn mechanics, dirt, disc
from12 000 ₸
Laser, drive, mechanics
from12 000 ₸
HDMI port, cable, chip
from13 500 ₸
Overheating, power supply, protection
from16 000 ₸
Software, storage, board
from8 000 ₸
Power, firmware, button
from5 000 ₸
Misalignment, mounting, lubrication
from2 500 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1–2 hourstime
from 8 000 ₸cost

BeforeAfter5 steps

From request to check — five steps.
Tell us the model and symptoms — the technician will prepare for the visit.
The technician brings tools and common parts for the model you mention; address and time are agreed when you place the request.
The technician reports the inspection results and the list of needed work.
You confirm the list of work, and then the technician starts the repair.
The technician launches a test game and checks the ports and drive together with the owner.
The digital device repair department in Almaty has 7 technicians with 7 to 18 years of experience.

The department has 7 specializations — they are listed on the technicians' cards.
experience7 yearsGame console repair technician
experience10 yearsSenior TV repair technician
experience10 yearsTV board repair technician
experience10 yearsElectromechanical technician
experience13 yearsAudio and DVD repair technician
We reply during working hours
Describe the console issue — the technician will agree on a visit time and come with tools and parts. They will tell you the diagnostics results and repair cost on site before starting work.

Warranty question? Call us
+7 (778) 746 01 657 898 reviews of repairs at TECH SERVICE in total
Алексей Г.Order No. TS-2611-791 · 26 February 2026
oursВыбирал по отзывам в 2ГИС, времени на эксперименты не было. Настроения писать не было, но пусть будет. Проблема — не читает диски. Поставили новую деталь: кулер. По деньгам вышло адекватно, в другом месте просили больше. Ребята из techservice работают давно, это чувствуется. Проверил дома — всё на месте, ничего не забыли.
Эльвира Д.Order No. ZK-2025/560 · 12 April 2025
oursДолго откладывал ремант, потом всё-таки собрался. Основная жалоба — перегреваеться. Работает как раньше, придирок нет.
Алексей Г.Order No. 2022-3956 · 31 August 2022
oursРаботаю допоздна, поэтому нужен был сервис с нормальным графиком. Записался на диагностику VR-шлема. С чем пришёл: мутность. Дмитрий Радионов принял, посмотрел и сразу сказал, что делать. Ответили быстро, не пришлось ждать на линии. Все разъёмы на месте, ничего не люфтит.
Артём К.Order No. ZK-4477 · 8 March 2022
oursИскал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. Техника работала годами, а тут — не включается. Поставили новую деталь: привод. Приняли, выдали квитанцию, всё по-человечески. Оплатил картой, чек дали. В общем, доволен. Даже настройки не сбились, что удивительно)
Лилия В.Order No. ZK-7800 · 4 August 2020
oursДруг посоветовал, у него похожая история была. В списке работ — аккумулятор. Починили и дали гарантию на месяц.
Мадина Т.Order No. 75051 · 23 June 2020
oursБольше всего напрягало: перегревается. Дмитрий Радионов помог выбрать, без навязывания. Сделали и забыл про проблему.
Сергей Р.Order No. 595824 · 3 January 2020
oursДо этого обращался в другой сервис, там только развели руками. Отдал мастеру: геймпад. Больше всего напрягало: не заряжается. Дмитрий Радионов помог выбрать, без навязывания. Заплатил 11 500, и не жалею. Из деталей — аккумулятор. Мастер сразу сказал, что к чему, без размытых формулировок. Спасибо, выручили. Даже настройки не сбились, что удивительно.
Алия Ш.Order No. TS-1803-103 · 1 February 2018
oursХотел сначала вызвать мастера на дом, потом передумал. Первое, что заметил: не включается. Вернули в тот же день, всё функционирует!!
Евгений М.Order No. 2017-7532 · 25 May 2017
oursДолго откладывал ремант, потом всё-таки собрался. Нужен был ремант VR-шлема — обратился сюда. Основная жалоба — мутность. Дмитрий Радионов не стал навязывать дорогую запчасть, поставил нормальную. Деталь на замену — линзы. Ответили быстро, не пришлось ждать на линии. По деньгам вышло адекватно, в другом месте просили больше. Ставлю пятёрку. Пользуюсь ежедневно, вопросов нет.
Фарида К.Order No. 2016-8631 · 5 February 2016
oursДруг посоветовал, у него похожая история была. Больше всего напрягало: перегреваеться. Второй месяц — полёт нормальный)
Didn’t find the answer? Message us on WhatsApp.
Ask a questionYes, most often the power supply or the protection circuit on the board fails, and this can be restored by replacing the damaged components. A free diagnostic check by a technician will show exactly what burned out.
It depends on the model and the condition of the drive: sometimes it's enough to clean the mechanism or replace the laser, and sometimes a new drive assembly is needed. The technician will determine this after disassembly and testing.
Yes, the HDMI port and the video output circuit can be repaired, and usually there's no need to replace the console. After replacing the port, the technician checks the signal on the TV and provides a 1-year warranty.
The cause can be the controller itself, the console's Wi-Fi and Bluetooth module, or a pairing failure. The technician will check both devices and restore the communication module or repair the gamepad separately.
Most likely it's overheating due to dried thermal paste or dust in the cooling system, which over time can lead to shutdowns. The technician will clean it, replace the thermal paste, and check the fans.
Yes, this behavior is often related to overheating, a firmware failure, or a faulty hard drive. The technician will run diagnostics and restore the system or replace the storage drive.

Author: Bakdaulet E.,Game console repair technician
Published
Updated
Tech Service repairs Xbox 360, One, One S, One X, Series S, and Series X consoles, as well as Xbox controllers in Almaty. A technician arrives at your home within 60 minutes, or the repair is done at the service center. Diagnostics are free, and there is a 1-year warranty on labor and parts. The technician provides the cost after diagnostics.
Xbox failures are rarely random—each symptom points to a specific component: power, cooling, or the video chip. We explain what each sign means and what the technician checks during diagnostics.
Most often, an Xbox won't turn on due to a power supply or damage to a circuit on the motherboard after a voltage spike, and less often due to a firmware failure after an update. The switching power supply is the first to absorb a surge in the mains and either goes into protection or burns out along with the board traces. A failure after a system update looks different: the console shows signs of life but freezes on the logo or gets stuck in a reboot loop. We start by measuring the output voltages of the power supply and checking the board's power circuits—these two components account for most "won't turn on" cases. Before taking the console to a service center, unplug it from the mains for 10–15 minutes—sometimes the power protection kicks in, and it's not a breakdown. Our Xbox repair in Almaty starts with free diagnostics, not with replacing components at random.
If an Xbox Series X gets noisy and hot after 20 minutes of gaming, the cause is usually a dust-clogged cooling system and dried-out thermal paste, not a faulty chip. The fan runs at high RPM trying to compensate for a clogged heatsink, so the hum increases toward the middle of a gaming session, and the case becomes hot to the touch. Thermal paste between the processor and heatsink loses its properties over a couple of years and stops dissipating heat. Then thermal protection kicks in—the console shuts down without an error, and the owner blames it on a game freeze. In our practice, maintenance with disassembly, cleaning, and thermal paste replacement restores the normal noise level. Overheating is dangerous not in itself—it accelerates chip wear, so maintenance is done before shutdowns appear, not after.
The Red Ring of Death and error E74 on Xbox 360 indicate a hardware failure—most often problems with the video chip or board power. Error E74 is related to the video chip and its circuitry, while combinations of flashing ring segments describe different failure groups: power, overheating, or cold solder joints under the chip. The technician reads the code by the number of lit segments and the flashing pattern, then confirms the diagnosis by testing circuits on the motherboard. They also check the video chip's power and the condition of the thermal interface beneath it—these areas most often produce this symptom. Flashing ring segments are a code, not "just a glitch": by the number of lit segments, the technician narrows down the faults even before disassembly, which means a more accurate estimate of the work.
The Xbox lineup is not uniform: the 360, One, and Series have different weak points. We show what breaks on each model and which component we check first.
| Model | Common failures | What we check |
|---|---|---|
| Xbox 360 | red ring, error E74, disc drive | video chip, power, tray |
| Xbox One | won't turn on, freezes | power supply, hard drive |
| Xbox One S | HDMI output, tray | connector soldering, disc drive |
| Xbox One X | overheating, power | cooling, thermal paste, board |
| Xbox Series S | noise, overheating, Wi-Fi | fan, thermal paste, module |
| Xbox Series X | noise and shutdowns | cooling system, board |
Restoring an Xbox 360 makes sense when the fault is local—a disc drive, a port, or cooling; if the video chip fails, the decision depends on the condition of the board. The 360 most often comes in with the red ring and error E74: both symptoms point to an overheating video chip and solder degradation underneath. The optical tray and HDMI output are fixed point-by-point—replacing the drive or re-soldering the port gets the console working again without touching other components. Video chip failure is trickier: the integrity of the board and the absence of signs of previous repairs matter here. Before deciding on restoring a 360, it's worth comparing it with the cost of replacing the component—sometimes maintenance extends the console's life for less than you'd think, and sometimes the board is beyond repair.
We service both current models both at home and in the shop, and a technician arrives anywhere in the city within 60 minutes. Diagnostics are free: on site we check the cooling system, power, and Wi-Fi module, and if needed we take the console to the shop—our Xbox repair in Almaty starts with this check, and based on its results the technician quotes the cost of work. We provide a 1-year warranty on labor and parts and you can pay via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies. New consoles suffer more from overheating and voltage spikes than from wear, so maintenance is more relevant for them than major intervention: replacing thermal paste and cleaning the heatsink takes the main load off the board, and the on-site format saves the owner a trip across town.
We are a direct provider, not an aggregator: your console is serviced by our specialist, not a middleman. Here's the workflow from request to test—with free diagnostics and a 1-year warranty.
Diagnostics are free and start with disassembly and a visual inspection of the board, after which the specialist names the cause and the cost of work. They arrive at your home within 60 minutes anywhere in the city and open the case on site—some faults are visible right away without transporting the console. If the breakdown requires soldering or board work, the device goes to the shop, and you get a conclusion on the specific component, not a vague phrase about a malfunction. Inspecting the board under magnification reveals signs of overheating and microcracks in the solder that aren't visible during an external check of the case. That's why the technician shows you the area where the defect is found—it makes clear whether this is a restoration or a component replacement.
Dust cleaning and thermal paste replacement are maintenance, which becomes part of cooling system work once overheating has already started. In our practice, these tasks go together: dust clogs the heatsink fins, the fan spins at max, and the chip runs hotter than it should. Thermal paste isn't changed on a schedule but based on condition: if it's dried out, airflow won't save the chip from overheating even with a clean heatsink. Our specialist removes the cover, blows out the heatsink, removes the old layer and applies a new one, then checks heating under load. Moreover, on consoles with tight layouts this procedure also reduces noise—it often comes from a sticking fan, not the chip itself.
The Xbox drive is more often restored than replaced entirely, and the HDMI port is fixed by soldering if the board traces aren't damaged. Xbox console repair in this case comes down to local intervention: the laser is replaced, the port is re-soldered, the cable between components is checked. Replacing the whole drive is only justified when the mechanics are worn out—if the laser or solder fails, local restoration of the component is enough. With HDMI the logic is the same: first they check the condition of the motherboard traces, because a pulled-out port with a damaged mounting area requires restoring contacts, not just installing a new part. Before such soldering, we always check the image output on another cable and monitor—this rules out a false diagnosis of the port.
A gamepad fails no less often than the console itself, but it's repaired separately and doesn't require replacing the whole system. Here's why the device loses connection with the console and what can actually be restored.
If your Xbox controller won't connect via Bluetooth, the culprit could be either the joystick itself or the console's module — our technicians determine which side is at fault during free diagnostics. First, they check pairing with another device: if the controller shows up on a smartphone or PC, its transmitter is working, and the issue lies in the console's Wi-Fi module or firmware. The opposite picture — the console doesn't see any gamepad — points to a worn-out radio module inside the case. On Series S and Series X, this unit is combined with the wireless board, and replacing it requires soldering. On Xbox One, the connection more often drops due to oxidized contacts on the sync board. Before contacting the service, reconnect the controller to another device — that immediately shows which side to look for the fault. Our Xbox repair starts with checking pairing, not with replacing the case.
Transparent terms are more important than promises. We explain how the cost is formed, what diagnostics includes, and what warranty we provide for work and parts.
The technician names the cost after free diagnostics, when the cause and scope of work are known. First, they open the case and check the power, motherboard circuits, cooling system, and drive — for each unit, it's clear whether a part needs replacing or just cleaning and thermal paste. Repairing an Xbox with a damaged power connector and replacing the drive involve different disassembly and different components, so a single figure for all cases would be misleading. Free diagnostics removes the main risk: you pay only for the work your console actually needs. The final amount depends on the unit and part, so naming it before disassembly means guessing, not calculating. In our practice, it's often not the replacement itself that costs more, but finding the cause: until the board is checked, any estimate remains a guess.
We provide a 1-year warranty on labor and parts and you can pay via Kaspi QR, Kaspi Red (instalments), bank card, cash, or bank transfer for companies. The specialist who opened the console remains responsible for the result: if the same unit fails again, they will deal with it, not an unnamed contractor. In our practice, we see different wallets and habits — cash, card, transfer — and payment isn't tied to one method. The warranty also covers components, so replacing a unit doesn't turn into a second repair at your own expense. This is an important difference from one-off side jobs: a 1-year warranty on labor and parts means that during this period, the same person who handled your console from the start will address the issue.
With a direct contractor, your console is serviced by our technician, not an intermediary, so one party is responsible for the work and warranty. In an aggregator, a dispatcher stands between you and the specialist: one service takes the request, but a third-party person comes on-site, and in a dispute about quality, the warranty runs into correspondence, not a specific contractor. With us, the on-site technician arrives personally, performs diagnostics, and is responsible for the result — a one-link chain. For the console owner, this means the request isn't relayed to a colleague over the phone — the same technician handles it. And a warranty case is resolved without forwarding: the request goes to the person who had the device in their hands.
Console repair comes down to three steps: read the symptom correctly, account for the specifics of the model line, and don't put off maintenance until the first shutdowns. Below is a short summary to help you decide.
12brands
We repair all generations of Xbox consoles: Series X|S, One, and earlier models. A technician will come at a time that works for you, anywhere in the city.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your laptop screen is broken, turn the device off first, don't press on the display, and check the picture through an external monitor.
12 March 2026 · 11 minutes read
If your phone won't charge, start by checking the adapter, cable, and port, then the charging settings.
16 February 2026 · 12 minutes read
If your laptop freezes, the first thing to do is restart it and check Task Manager to see what's loading the CPU and memory.
25 January 2026 · 12 minutes read
If your phone falls in water, take it out right away, turn it off, and don't charge it.
19 January 2026 · 12 minutes read
If your phone camera isn't working, first check app permissions, clear the cache, and restart your phone — this fixes some software glitches.
24 December 2025 · 13 minutes read
If your laptop won't boot, first determine which of two states you're in: the device doesn't respond to the power button at all…
13 December 2025 · 12 minutes read












