Open until 19:00+7 (778) 746 00 26Call a technician
Tech Service technician next to a washing machine

Atlant Washing Machine Repair in Astana

A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.

  • 1-year warranty on labor and parts
  • Free diagnostics
  • Technician arrival within 60 minutes

Our own technicians4 to 20 years of experience

Vladimir V.Adilkhan N.Temirlan B.Miras O.

Repair prices

  • Diagnostics0 ₸
  • Inlet valve replacementfrom3 000 ₸
  • Clog removal, filter cleaningfrom3 000 ₸
  • Motor brush replacementfrom3 000 ₸
  • Pressure switch (water level sensor) replacementfrom3 000 ₸
All prices
ours5,06 127 reviews
order database
Common faultsCommon faultsTECH SERVICE02

Common Atlant washing machine faults in Astana

Common symptoms and likely causes. The technician will pinpoint the exact cause during free diagnostics.

PricesPricesTECH SERVICE03

How much Atlant washing machine repair costs in Astana

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Inlet valve replacementparts not included

1–2 hours

from3 000 ₸

Clog removal, filter cleaninglabour only

1–2 hours

from3 000 ₸

Motor brush replacementparts not included

1–2 days

from3 000 ₸

Pressure switch (water level sensor) replacementparts not included

1–2 hours

from3 000 ₸

Temperature sensor replacementparts not included

1–2 hours

from3 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Atlant washing machine repair in Astana

Contact lost in module connector

1 visittime

from 7 000 ₸cost

Problem
The Atlant washing machine sometimes did not respond to buttons, and sometimes reset the program in the middle of a wash.
What we did
The technician removed the top cover, took out the control module, resoldered the connector pins where the solder had cracked and contact was lost due to vibration, and put the module back in place.
Result
The machine starts programs and the spin cycle without failures, and the controls work stably. 1-year warranty on the work and on the parts.
I want the same
Removed control module on a stool: a green board in a gray tray with black relays and white connectors, a technician's hands in orange sleeves soldering the connector pins with a soldering ironBeforeAfter
01 / 05
All repairs
TECH SERVICE mobile technician with a tool case

How Atlant washing machine repair works at your home in Astana

Five steps from request to post-repair check.

  1. Requeston the day of request

    Describe the symptom and machine model so the technician brings the right tools.

  2. Technician arrivalwithin 60 minutes

    The technician arrives anywhere in the city, inspects the machine, and notes the symptoms.

  3. Part selectionpart verification

    The technician checks the part against the machine's markings to avoid bringing an incompatible component.

  4. Post-repair checkcomponent test

    The technician runs a test program and shows that the component works without leaks or errors.

  5. Handoverafter repair

    The technician demonstrates the result and hands the machine back to the owner.

Leave a request

We reply during working hours

Book Atlant washing machine repair in Astana

Before the visit, the operator will ask about the type of noise, when the error appears, and whether there is water in the drum — this helps the technician prepare.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 746 00 26
Customer reviewsReviewsTECH SERVICE05

Reviews of Atlant washing machine repair in Astana

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Василий Е.Order No. ZK-2026-877 · 8 October 2026

ours

Смотрел, чтобы был свой склад запчастей, а не под заказ. Ни с того ни с сего — ошибка на дисплее. После ремонта — как новое

Repair: washing machine repair in

Григорий И.Order No. TSA-76195 · 24 July 2025

ours

Расстроился сильнее, чем следовало. Проблема ровно одна: течёт. Тихо, ровно, без сюрпризов.

Repair: washing machine repair in

Юрий М.Order No. AS-4721 · 15 July 2024

ours

Искал, кто работает в субботу, у нас с женой график сложный. Больше всего мешало: не сушит. Даже сосед заметил, что громче не стало.

Repair: washing machine repair in

Мария Р.Order No. AS-4480 · 24 August 2021

ours

Дильмурат С всё сделал при мне, за пятнадцать минут. Шум ушёл, работает мягко.

Repair: washing machine repair in

Степан Я.Order No. TSA-98227 · 1 February 2021

ours

Хотел вызвать на дом, но в ЖК не пускают без пропуска. Основная жалоба — не сушит. Полёт нормальный.

Repair: washing machine repair in

Пётр Ч.Order No. AST-1811-567 · 2 June 2018

ours

Смотрел, чтобы был свой склад запчастей, а не под заказ. Первое, что заметил: не отжимает. Tech-service посоветовали в домовом чате. Тихо, ровно, без сюрпризов.

Repair: washing machine repair in

Эвелина Ш.Order No. TSA-23656 · 4 October 2017

ours

В Астане с сервисами беда, поэтому выбирал по отзывам. Сначала списал на мороз, но нет: вибрация. Ни шума, ни запаха, всё штатно.

Repair: washing machine repair in

Елизавета Л.Order No. 92466 · 15 June 2016

ours

Первое, что заметил: не сливает воду. Ораз подобрал аналог дешевле, не навязывал оригинал. Даже сосед заметил, что громче не стало.

Repair: washing machine repair in

Инкар Д.Order No. AST-1608-336 · 22 March 2016

ours

Кеңседегі құрылғы, чек пен акт керек еді. Қабылдау тез болды, кезек жоқ. Бағаны алдын ала айтты, соңында өзгермеді. Түскі үзіліске қарамастан қабылдады. Мастер бәрін түсіндірді. Ескі бөлшекті көрсетіп, қайтарып берді. Достарыма айтамын.

Repair: washing machine repair in

Валерия А.Order No. 65923 · 22 March 2016

ours

Искал, кто работает в субботу, у нас с женой график сложный. Честно, не ожидал, что так быстро. Больше всего мешало: течёт. Замена: подшипник. Диагностику провели при мне, ничего не унесли в подсобку. В другом месте просили на треть больше. Достойно сделали. После ремонта — как новое.

Repair: washing machine repair in
See all reviews

Our technicians in Astana

01 / 05
Vladimir V., senior washing machine technicianexperience10 years

Vladimir V.

Senior washing machine technician

Adilkhan N., washing machine installation technicianexperience16 years

Adilkhan N.

Washing machine installation technician

Temirlan B., washing machine repair technicianexperience12 years

Temirlan B.

Washing machine repair technician

Miras O., washing machine board repair technicianexperience10 years

Miras O.

Washing machine board repair technician

Questions and answersQuestionsTECH SERVICE06

Questions about Atlant washing machine repair in Astana

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Where can I get an Atlant washing machine repaired in Astana?

Our service repairs Atlant washing machines in Astana: a technician comes to your home or takes the machine in for repair at the service center. Diagnostics are free, and a technician arrives within 60 minutes anywhere in the city.

What are common faults in Atlant washing machines?

The most common issues are problems with draining or filling water, failure to spin, leaks from the bottom, no heating, and noise during spinning. The technician determines the exact cause after diagnostics, checking against the model code.

What breaks most often in a washing machine?

Based on our technicians' experience, the drain pump, heating element, and sensors fail most often, and filter and hose clogs also occur. Hard water and overloading the drum contribute to wear.

How do I find a good washing machine repair technician?

Choose a direct contractor rather than an intermediary: it's easier to get a warranty and ask questions to the person who will do the repair. Ask whether they provide a warranty on labor and parts and offer free diagnostics.

How can I tell if the pump in an Atlant washing machine is broken?

If the machine doesn't drain water but the filter and hose are clean, the pump has likely failed. The technician will check whether the impeller spins freely and replace the pump if necessary.

Water is leaking from the bottom of an Atlant washing machine — what could it be?

Most often, leaks come from hoses, the pump, or connections, and the door seal leaks at the front. The technician will determine the exact cause after inspection to replace only the damaged component.

Repair guideArticleTECH SERVICE07

Atlant Washing Machine Repair in Astana with a Technician Visiting Your Home

Vladimir V., senior washing machine technician

Author: Vladimir V.,Senior washing machine technician

Published
Updated

Tech Service repairs Atlant washing machines in Astana with its own technicians, who have 4 to 20 years of experience. A technician arrives at your home within 60 minutes anywhere in the city, diagnostics are free, and there is a 1-year warranty on labor and parts. The technician gives you the price after diagnostics.

Why Atlant Washing Machines Won't Drain, Fill, or Spin

For Atlant washing machines, most complaints boil down to five symptoms, and each has two or three common causes—from simple to complex. Let's break down what to check first and where the fault usually lies.

The Machine Won't Drain Water: What to Check Before Calling a Technician

If your Atlant washing machine won't drain water, the most common culprits are a clogged drain filter, a kinked or blocked hose, and only then the drain pump. The filter is located at the bottom front behind the service flap: lint, coins, and small objects block the impeller, and the water simply won't drain. The drain pump doesn't work during water intake—it only turns on during draining, so any unusual humming during the wash cycle has nothing to do with the pump. The cause of pump failures is the same debris and a clogged filter. A multimeter won't show a jammed pump: you check whether the impeller rotates freely. Atlant washing machine repair in Astana usually starts with this check—it rules out the most common causes. Before calling a technician, unplug the machine and drain the water through the emergency drain hose behind the service flap at the bottom front, placing a towel underneath—the water may be hot.

It Won't Fill with Water or Heat: Where to Look for the Cause

When an Atlant machine won't fill with water, check the tap, the inlet hose filter, and the inlet valve; and if there's a heating problem, it's almost always the heating element or the temperature sensor. The filter gets clogged with rust and sand over the season, and the pressure drops to a level where the valve won't open. The inlet valve fails less often—usually due to scale on moving parts. Heating is checked separately: if the wash cycle runs but the water stays cold, the issue is either the heating element or the sensor sending a wrong signal to the board. On most brands, the heating element can be replaced without removing the tank, so "not heating" usually requires less disassembly than the owner might think—don't put off diagnostics for fear of dismantling half the machine.

It Won't Spin, Stops Mid-Cycle, and Leaks from Below

If your Atlant machine won't spin or stops mid-cycle, the cause is more often an unbalanced load, a draining problem, the drive belt, or the motor—and the control board is just one possible cause. A load bunched into a lump prevents the drum from accelerating: usually 800–1600 rpm depending on the model, and at high speed the imbalance triggers a protective stop. The machine stops mid-cycle more often due to draining, less often due to the motor. Brushed motors wear out their brushes; inverter motors don't have brushes. A leak from below is traced to the hoses, pump, and connections, while the door seal leaks at the front by the door, so the leak location immediately tells you which part to disassemble: the front panel or the bottom of the machine.

Atlant Washing Machine Error Codes and Model-Specific Repair

A symbol on the display narrows down the cause, but its meaning depends on the specific machine, so the technician cross-checks the code with the table for your model. Let's go over common codes and how to interpret them.

Drain and Fill Error Codes E18, F18, E17, F17

Code E18 or F18 (d02 on some models) indicates a draining problem, while E17 or F17 means water isn't filling within the allotted time. The drain code points to three typical causes: a clogged filter at the bottom front behind the service flap, a kinked or blocked drain hose, or a worn pump whose impeller is jammed with debris. For filling issues, check for a closed tap, the inlet hose filter, and the inlet valve. The drain pump doesn't work during water intake, so don't confuse these two groups. If the code indicates draining or filling, Atlant washing machine repair in Astana starts with checking these components. The same symptom on different Atlant generations is coded differently, so you can't order a part based on a single digit without the machine's model number—first cross-check the table for your appliance.

Error F13 and Why the Code Should Be Read Together with the Model

The F13 error on an Atlant washing machine doesn't have one universal meaning—it's decoded using a table for the specific model and generation. On machines with a display, the code is shown right away; on versions without a screen, it's indicated by flashing lights: it's important to note which lights are on and in what sequence, not just the fact that the machine stopped. The generation also changes the set of components behind the code and the order of checks. The same combination on two different Atlant machines can point to different components, so the technician first checks the machine number on the nameplate and then interprets the symbol. On versions without a screen, the combination is shown by indicators, and the owner should write down which lights are flashing—this will speed up diagnostics.

How a technician decodes the code using the model table

We compare the error code with the table for the specific Atlant model and generation, rather than decoding it from memory. A Tech Service technician first records the code and model number, then checks them against the table, and only after that addresses the component. The code narrows down the possible components, but the final cause is confirmed by checking the component: the same drain combination can be caused by a clogged filter or a failed pump, and the machine behaves the same externally. Our technicians have worked with this brand for 4 to 20 years and know where the generation changes the interpretation. Before disassembling, unplug the machine and drain the water through the emergency drain hose behind the service flap at the bottom front, placing a towel underneath—the water may be hot.

How Atlant washing machine repair at home works

Atlant washing machine repair at home follows one procedure: free diagnostics, selecting a part by model code, the work itself, and the warranty. We break down each step and explain why some operations are performed in the service center.

Diagnostics and selecting a part by model code

We start with free diagnostics and select the part by part number or model code, not by eye. A Tech Service technician checks the component, compares the code with the table for your machine, and only then states what exactly needs to be replaced. The identifier is on the nameplate in the loading door—it shows the exact modification and series, so the part ordered is the one installed in your machine. This approach eliminates replacing a working component with a visually similar part: pumps, heating elements, and belts differ in fit across series. The door nameplate allows ordering exactly the element installed in your machine and avoids replacing a working component for a part that looks the same. Before the visit, take a photo of the nameplate—this will speed up part selection.

What is done at home and what in the service center

We service Atlant washing machines at home or in the service center, and the choice depends on the component: the heating element on most brands is replaced without removing the tank, while bearing replacement requires removing the tank and drum. At home, the technician removes the pump, belt, door seal, installs a new heater, and checks the motor—these tasks don't require transporting the machine. The drum bearing is replaced only if the tank is disassemblable; on a sealed tank, the bearing is not replaced separately, so the technician explains in advance what is possible in your case. Bearing replacement is the longest job: the tank and drum have to be removed entirely. For this reason, such operations are not always done on site. Ask before disassembly whether your model has a disassemblable tank—this determines whether the machine stays at home or goes to the service center.

Table of typical work by Atlant components

ComponentWhat we checkHow it is replaced
Drain pumpfree rotation of the impellerpump removed from below
Heating elementheating and temperature sensorwithout removing the tank on most brands
Drive belttension and wearinstalled on site
Door sealleak at the front of the doordoor seal removed
Drum bearingplay and noise during spinwith removal of the tank and drum
Motorbrushes on commutator motorsremoved and windings checked

Direct provider or middleman: who to call in Astana

Search results for Atlant washing machine repair are full of aggregators and classifieds, and owners need to know who will actually show up. Here's how to tell a direct provider from a middleman.

How a direct provider differs from an aggregator

Tech Service is a direct provider with its own technicians, not an aggregator or middleman, so the person who arrives is a service employee, not an outside contractor. With an aggregator, your request goes into a common pool, and someone you didn't choose—whose qualifications are unknown—may show up at your door. A direct provider takes the call, handles the Atlant washing machine service on-site, and stands behind the result. The difference is clear from the first conversation: our dispatcher asks about the model and symptom, not just the address. With a direct provider, the person is accountable to the service, so the warranty and follow-up visits aren't lost between middleman and contractor—there's someone to make a claim to.

60-minute arrival anywhere in the city

Our technician arrives at your home within 60 minutes anywhere in the city, and that covers every district of Astana without exception. An aggregator collects requests and distributes them among contractors—that takes time, and meanwhile your machine sits with water in the drum. Our employee heads to your address right after the call is confirmed, so diagnostics start without unnecessary waiting. Fast arrival matters not for its own sake, but because a leak or a mid-cycle stop can't be left for a day: water and dampness can damage the floor and furniture. If the machine won't drain, unplug it and drain the water through the emergency hose behind the service flap at the bottom front, placing a towel underneath—the water may be hot.

Technician experience and why it matters for Atlant

Our technicians have 4 to 20 years of experience, and with Atlant machines that means familiarity with different generations and model series. The same brand's different generations are built differently, so an experienced technician checks the model first, then chooses tools and the disassembly sequence. Error codes are also read together with the model: the meaning of E18 or F18 (d02 on some models) is checked against the table for that specific machine, not interpreted from memory. A novice often takes the simplest path and replaces the whole unit, while experience lets them check the filter, hose, and pump in order first. In our practice, this approach saves the owner time: the person arrives knowing what to look for and doesn't take the machine apart at random.

Warranty, diagnostics, and terms of service

A warranty and transparent diagnostics remove the owner's main fear—that the service will cost more than expected. Here's how we work and when repair is worth it.

1-year warranty on labor and parts

We provide a 1-year warranty on labor and parts, so if the unit fails again, it's covered under this warranty. The term is the same for both—installation and the part itself, not just the labor. Our technicians have worked with Atlant appliances for 4 to 20 years and know which components of this brand fail repeatedly: the pump, drain hose, heating element, bearing when the seal is worn. A warranty on the part separate from the labor matters because some failures are due to the part, not the quality of installation, and the owner doesn't have to prove whose responsibility it is. When you make a warranty claim, the technician checks the part number and the machine model—these show which part was installed and which unit failed.

Free diagnostics and what the price covers

Diagnostics are free, and the technician gives you the price after them, once the cause and the needed part are clear. During the inspection, they check draining, water intake, heating, and spinning: whether the pump impeller turns freely, whether the mesh on the inlet valve is clogged, whether the belt is intact, and whether there is water in the sump. The same symptom can mean different amounts of work — the machine may not drain because of a clogged filter or because of the pump, and you can't tell until you check. Giving the price after diagnostics is more honest than quoting over the phone, because one symptom can mean anything from a cheap clog to replacing a unit, and you can't see that until you take it apart. That way the owner decides whether to go ahead with the work, knowing the exact cause rather than a guess.

Repair or replace: when repair makes sense

Repairing an Atlant washing machine makes sense when the breakdown affects a single unit and the tank and drum are intact, while replacement is more reasonable when several expensive jobs add up. A single fix — pump, heating element, inlet valve, belt, temperature sensor — gets the machine running again without major disassembly costs. Another scenario is when motor or electronics failure comes with bearing wear: then the total scope of work is calculated and compared with the remaining life of the other components. The longest job is replacing the bearing, which requires removing the tank and drum, so it is often priced separately before deciding the machine's fate. In a sealed tank, the bearing is not replaced separately, and that also affects the conclusion. When the machine is over ten years old and the bearing, pump, and heating all need attention at once, the owner can weigh both options calmly, without rushing.

How Atlant washing machine repair saves you money

Repairing an Atlant washing machine follows a simple logic: from symptom to cause, from error code to the specific unit. Below are the key takeaways that help you decide without unnecessary trips and disassembly.

  • Five symptoms: won't drain, won't fill, won't spin, won't heat, leaks from below — these account for most calls about Atlant machines.
  • Causes in order: each fault is checked from simple to complex — filter and hose before the pump, imbalance and belt before the motor.
  • Error code: E18 or F18 point to draining, but the code's meaning is checked against the table for the specific model generation, not guessed.
  • Workflow: diagnostics, selecting the part by model code, repair at home or in the service center, warranty on the result.
  • Responsibility: the direct contractor is responsible for the work done by its own technicians, while an aggregator only passes on the request.
  • Risk protection: a warranty on labor and parts together with free diagnostics cover the owner's main concerns.

85brands

Besides Atlant, we repair other washing machine brands in Astana

We work with washing machines of every brand sold in Kazakhstan — from Samsung, LG and Indesit to Beko, Haier, Artel and rare imported makes. Can’t find yours in the list? Call anyway — a technician will come and take a look.

We also repairWe also repairTECH SERVICE08

Besides Atlant washing machine repair, we fix other equipment in Astana

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE09

Worth reading before Atlant washing machine repair in Astana

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp