Open until 19:00+7 (778) 746 00 26Call a technician
Tech Service technician next to a washing machine

Daewoo Washing Machine Repair in Astana

A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.

  • Arrival within 60 minutes
  • Free diagnostics
  • 1-year warranty

Our own technicians4 to 20 years of experience

Vladimir V.Adilkhan N.Temirlan B.Miras O.

Repair prices

  • Diagnostics0 ₸
  • Inlet valve replacementfrom3 000 ₸
  • Clog removal, filter cleaningfrom3 000 ₸
  • Motor brush replacementfrom3 000 ₸
  • Pressure switch (water level sensor) replacementfrom3 000 ₸
All prices
ours5,06 127 reviews
order database
Common faultsCommon faultsTECH SERVICE02

Common Daewoo washing machine faults in Astana

Select a symptom to see the likely cause.

PricesPricesTECH SERVICE03

How much Daewoo washing machine repair costs in Astana

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Inlet valve replacementparts not included

1–2 hours

from3 000 ₸

Clog removal, filter cleaninglabour only

1–2 hours

from3 000 ₸

Motor brush replacementparts not included

1–2 days

from3 000 ₸

Pressure switch (water level sensor) replacementparts not included

1–2 hours

from3 000 ₸

Temperature sensor replacementparts not included

1–2 hours

from3 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Daewoo washing machine repair in Astana

Contact lost in module connector

1 visittime

from 7 000 ₸cost

Problem
The Daewoo washing machine either did not respond to buttons or reset the program mid-wash.
What we did
The technician removed the top cover, took out the control module, re-soldered the connector pins where the solder had cracked and contact was lost due to vibration, and reinstalled the module.
Result
Program start and spin work, the machine is controllable again and does not reset the wash.
I want the same
Removed control module on a stool: a green board in a gray tray with black relays and white connectors, a technician's hands in orange sleeves soldering the connector pins with a soldering ironBeforeAfter
01 / 05
All repairs
TECH SERVICE mobile technician with a tool case

How Daewoo washing machine repair works at your home in Astana

From request to performance check — five steps.

  1. Requeston the day of request

    Describe the symptom and the machine model so the technician brings the right tools.

  2. Part approvalbefore ordering

    The technician determines which part is needed — original or equivalent — and agrees on the option with the owner.

  3. Post-assembly testafter assembly

    The technician runs a wash cycle and checks for tightness and leaks after installing the part.

  4. Repairby appointment

    The technician replaces the faulty component and checks the connections for tightness after assembly.

  5. Checkafter repair

    The technician shows the result to the owner and explains how to use the machine going forward.

Leave a request

We reply during working hours

Book Daewoo washing machine repair in Astana

Choose a convenient visit time and confirm your request — the technician will arrive prepared, and you won't waste time on approvals.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 746 00 26
Customer reviewsReviewsTECH SERVICE05

Reviews of Daewoo washing machine repair in Astana

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Альбина Ю.Order No. AS-5393 · 13 April 2026

ours

Позвонил в четыре места, тут ответили по-человечески. Проблема ровно одна: не отжимает. Рустем Т — мастер от бога, если можно так сказать. Ни разу не пожалел.

Repair: washing machine repair in

Эдуард К.Order No. 2502-2274 · 23 May 2025

ours

Позвонил в четыре места, тут ответили по-человечески. В работе было: промышленная стиральная машина. Больше всего мешало: не отжимает. Ни копейки больше обещанного. Вскрытие показало: тэн. Работает, даже лучше прежнего

Repair: washing machine repair in

Сымбат Х.Order No. 88858 · 4 November 2024

ours

Құрылғыны әкелдім, бірден қабылдады. Нәтижесіне ризамын. Қайта жүгінуден тартынбаймын.

Repair: washing machine repair in

Валентина Р.Order No. TSA-91786 · 11 August 2024

ours

Офис на Кабанбай батыра, технику туда и повёз. Скепсис был, признаю. Жалоба одна: не сушит. Стоит, роботает, радует)

Repair: washing machine repair in

Борис В.Order No. 44344 · 19 June 2023

ours

Было важно успеть до конца недели, а то морозы обещали. Отдал в сервис: промышленная стиральная машина. Симптом как на ладони: вибрация. Мастер сам предложил забрать технику на следующий день. Проверил на всех режимах — держит.

Repair: washing machine repair in

Инна Н.Order No. 2112-1851 · 2 September 2021

ours

Раньше обращался в другой сервис, там очередь на две недели. Не хотел везти, думал, проще новое взять. Первое, что заметил: вибрация. Ораз подобрал аналог дешевле, не навязывал оригинал. Третий месяц — никаких проблем.

Repair: washing machine repair in

Мария Р.Order No. AS-4480 · 24 August 2021

ours

Дильмурат С всё сделал при мне, за пятнадцать минут. Шум ушёл, работает мягко.

Repair: washing machine repair in

Эдуард К.Order No. 2001-3695 · 11 December 2020

ours

С левого берега ехать далеко, поэтому искал поближе к дому. С этим и пришёл: ошибка на дисплее. Стоит, работает, радует.

Repair: washing machine repair in

Зоя М.Order No. AS-4933 · 25 August 2020

ours

Дима отсоветовал дорогой ремонт, предложил простой. Третий месяц — никаких проблем

Repair: washing machine repair in

Валерия А.Order No. 65923 · 22 March 2016

ours

Искал, кто работает в субботу, у нас с женой график сложный. Честно, не ожидал, что так быстро. Больше всего мешало: течёт. Замена: подшипник. Диагностику провели при мне, ничего не унесли в подсобку. В другом месте просили на треть больше. Достойно сделали. После ремонта — как новое.

Repair: washing machine repair in
See all reviews

Our technicians in Astana

01 / 05
Vladimir V., senior washing machine technicianexperience10 years

Vladimir V.

Senior washing machine technician

Adilkhan N., washing machine installation technicianexperience16 years

Adilkhan N.

Washing machine installation technician

Temirlan B., washing machine repair technicianexperience12 years

Temirlan B.

Washing machine repair technician

Miras O., washing machine board repair technicianexperience10 years

Miras O.

Washing machine board repair technician

Questions and answersQuestionsTECH SERVICE06

Questions about Daewoo washing machine repair in Astana

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Can a Daewoo washing machine with a sealed tub be repaired in Astana?

Yes, but the bearing in a sealed tub isn't replaced separately: the tub is replaced as a unit or a split-tub alternative is installed if it fits your model. The technician assesses this after free diagnostics.

Why won't the Daewoo washing machine drain water, and how can you tell if it's the pump and not the filter?

First, check the drain filter at the bottom front behind the service flap and the hose: debris and clogs are the most common cause. If the filter is clean but the pump impeller doesn't spin freely, the pump is likely faulty, and the technician confirms this.

The Daewoo won't spin clothes and the drum jerks—is it an imbalance or something more serious?

Most often it's an imbalance of laundry or a drain issue, less often a belt or motor. Spread the items evenly in the drum and check if the water has drained; if the spin doesn't start, a technician's inspection is needed.

How does a technician select a part for a Daewoo washing machine—by part number or by model?

They go by the part number or the model code from the machine's rating plate, because components differ across Daewoo series. This reduces the risk that a new part won't fit your modification.

What are the risks of continuing to use a Daewoo washing machine with a leak at the bottom?

Water floods the floor and can reach wiring and electronics, and a leak from under the door also damages the machine itself. Stop the wash, unplug the Daewoo from the mains, and don't run it until a technician inspects it.

Can the motor brushes in a Daewoo washing machine be replaced, or is the motor replaced entirely?

On brushed motors, the brushes are replaced separately, and this costs less than replacing the motor. Inverter models don't have brushes, so the cause is sought differently there—it depends on the model, and the technician gives the exact conclusion after diagnostics.

Repair guideArticleTECH SERVICE07

Daewoo Washing Machine Repair in Astana by Tech Service

Vladimir V., senior washing machine technician

Author: Vladimir V.,Senior washing machine technician

Published
Updated

Tech Service repairs Daewoo washing machines in Astana: a technician comes to your home within 60 minutes or you can drop the machine off at the service center. Diagnostics are free, there's a 1-year warranty on labor and parts, and the technician gives you the price after diagnostics. Technicians with 4 to 20 years of experience check the error code against the table for your specific model.

Why Your Daewoo Won't Drain and What Codes E18 and E17 Mean

Daewoo machines most often come in for draining, water fill, and spin issues. Let's break down what the code on the display means and which causes the technician checks first.

Code E18 or F18 and Other Drain Signals

We read E18 or F18 (d02 on some models) as a draining problem, and E17 or F17 as "water not filling within the allotted time." Code E18 usually points to a clogged drain filter, a kinked hose, or a worn drain pump; E17 indicates a water fill issue when the tap pressure is low, the inlet mesh is clogged, or the inlet valve won't open. On models without a display, the same signal is shown by indicators—their combination is decoded using the series table. The code's meaning depends on the model, so the technician checks it against the table for your specific machine rather than relying on a general list: the same brand's firmware across different generations interprets the signal differently. If water won't drain, Daewoo washing machine repair in Astana starts with checking the drain filter and pump impeller.

Won't Drain, Won't Fill, Won't Spin, Leaks, Won't Heat

SymptomCommon causes (from simplest)What the technician checks
Won't drainclogged filter, hose, pumpfilter, pump impeller
Won't filltap, mesh, inlet valvepressure, mesh, valve
Won't spinimbalance, drain, belt or motorlaundry, drain, belt
Leaks from bottomhoses, pump, connectionsconnections, door seal
Won't heatheating element, temperature sensorheating element and sensor
Stops mid-cycledrain, imbalance, motordrain, motor, board

Why the Machine Stops Mid-Wash

Most often, a Daewoo stops due to draining issues, laundry imbalance, or the motor—the control board is just one possible cause, not the main one. When water won't drain, the machine doesn't proceed to spin and freezes mid-program; if the laundry is bunched up, imbalance hits the drum and the cycle interrupts before the spin starts. A worn motor makes itself known with jerking and unusual humming, while the control board fails less often—usually after a power surge or moisture exposure. Always start with the drain filter at the bottom front behind the service flap and check whether the pump impeller spins freely—a multimeter won't show a jammed pump. If the machine stops with water in the drum, don't run another spin—deal with the drain first, or the water will remain and the cycle will interrupt again.

What to Do Right Now While the Technician Is on the Way

If there's water standing in the drum or the machine is leaking, there's one safe step that calms the panic and doesn't harm the appliance. Let's go over what to do before the technician arrives.

A Safe First Step When There's Water in the Drum

We recommend unplugging the machine, draining the water through the emergency drain hose behind the service flap at the bottom front, and placing a towel underneath. The hose is located next to the drain filter—it's a short corrugated tube with a cap; remove the cap over a basin or rag. Draining the water this way relieves pressure on the drum and keeps water from seeping under the baseboards while our technician is on the way across the city. We do this step first on site: after that, it's easier to check whether the pump impeller spins freely and whether the filter is clogged with lint and debris. The drain assembly doesn't run during water fill, so wait calmly for the program to stop before opening the cap. The water may be hot, so don't put your hands under the stream right away; and don't unscrew the filter "on the fly" or take the assembly apart yourself.

What Not to Do Before the Technician Arrives

Before the technician arrives, don't take the case apart, don't remove the pump, and don't run another wash cycle if the water won't drain. A repeat cycle pushes water back into the drum with the same clog and adds pressure to the pipes and hoses, and parts removed without experience are hard to put back. If it's leaking from the bottom, put a cloth underneath and shut off the water supply valve — that limits the flood, and it's easier for the technician to find the source by dry and wet areas. A leak from the bottom on a Daewoo points to the pipes, drain assembly, or hoses, while the door seal leaks at the front, right at the door, and you can see it without taking the case apart. A clogged filter and debris in the impeller are a common cause of stopping mid-cycle, and there's no point in taking the pump apart before inspection. Leave the machine alone until diagnostics — that way there's less risk of damaging a part that can still be fixed.

How Daewoo repair works in Astana

Our Daewoo washing machine repair in Astana is set up so the owner understands every step — from the technician's visit to the warranty. Below are the three stages that make up the whole job.

Home visit or repair at the service center

We send our technician to your home within 60 minutes anywhere in the city, or we take the machine in at the service center — whichever is more convenient for the owner. On a home visit, a technician with 4 to 20 years of experience inspects the machine on site: most often the problem is in the drain assembly or the water fill, and then it can be fixed right at your place. If the drum needs to be taken apart or the bearing replaced, it's easier to bring the machine to us — that work takes the longest because it requires removing the drum and tub. Tech Service is a direct provider, not an aggregator or a middleman, so the person who comes to your address is ours, not an outside contractor. The same technician who opened your machine is responsible for the result, and this approach makes it much easier to sort out any disputes after the repair.

Free diagnostics and how the price is set

Diagnostics are free, and the technician gives you the price after them — when it's clear which part is to blame. First he checks whether the pump impeller turns freely, whether the filter behind the service flap at the bottom front is intact, whether water fills and the heating works, and only then quotes the amount for the work and the part. That way the owner decides based on facts, not a phone call: first the inspection, then the numbers, and no guesses before the check. In my view, this approach is the fairest — you pay for a specific part, not for a guess. If the repair turns out to be impractical, you'll know before any work starts and won't waste money. The technician checks the error code against the table for your model, so the cause is named precisely, not guessed.

1-year warranty and payment

We give a 1-year warranty on labor and parts and accept payment via Kaspi QR, Kaspi Red, card, cash, or bank transfer for companies. The warranty covers both the part and the work itself, so if the same part acts up again after the repair, the same service center handles it, not a separate parts supplier. For the owner, this removes the main risk: you don't have to figure out who's responsible for the pump and who's responsible for installing it. You can pay any way you like, and the technician gives you the price after free diagnostics, before the repair starts. Before handing the machine in to the service center, ask which parts the warranty covers in your case — the technician records this at drop-off, and that detail saves time for both sides later.

Which Daewoo parts we repair and how we decide

Not every Daewoo part is replaced entirely — some are repaired. The technician explains why a particular approach is chosen and shows what the decision depends on.

Pump, filter, and how to tell them apart

We first check the drain filter at the bottom front behind the service flap and see if the pump impeller spins freely — that's how we tell a clog from a pump failure. Debris, coins, and lint are the main cause of drain pump failures, and a clogged filter is the first thing to hit it. A multimeter won't show a jammed pump: the meter measures the winding, not the mechanics, so checking that the impeller spins matters more than any readings. The drain pump doesn't run while the machine is filling — if water drains too early, look for the cause elsewhere. The drain filter is at the bottom front behind the service flap, and you can reach it without taking the machine apart. In my experience, half of all drain-related calls are solved by cleaning the filter and removing a foreign object from the impeller. Remove dried debris carefully so you don't damage the blades.

Motor, brushes, and bearing

Brushes only wear out on brushed motors — inverter motors don't have brushes, and the bearing in a sealed tub isn't replaced separately. The brushed motor in a Daewoo has brushes that wear down under load, and their condition tells you whether to repair the unit or replace it. An inverter motor is built differently, and looking for brushes in it makes no sense. Bearing replacement is the longest job, requiring removal of the tub and drum, so it's scheduled separately from other work. If the tub is split, the bearing can be replaced; if not, the issue is handled differently, up to replacing the whole tub. Drum speed is usually 800–1600 rpm depending on the model, and a worn bearing is more noticeable at high spin speeds. Before disassembly, the technician runs a spin cycle to confirm the source of the noise — that way the bearing isn't confused with an imbalance.

Control board: repair or replace

We first figure out what exactly failed on the board, and only then decide whether to repair the module or replace it — a full replacement isn't always needed. The board is one of the reasons a machine stops, but not the main one, so before touching the module the technician rules out drainage, imbalance, and motor issues. Diagnostics are free, and they show whether the machine is erroring out due to electronics or mechanics. If a clog or an unbalanced load is to blame, the board isn't touched at all. The module is repaired when the fault is local and visible on components; replacement is discussed when the board is damaged across multiple circuits. After restoration, Tech Service tests the machine on all programs to make sure the error doesn't come back. In our practice, the decision on the board always comes last — after checking the units that are cheaper and faster to work on.

How we source a part for your Daewoo model

Owners worry whether a part will be found for their specific machine. We source by part number or model code, not by eyeballing the unit's appearance.

By part number or model code

We source the part by part number or model code so the unit fits the specific Daewoo machine. The number is stamped on the unit itself — on the pump housing, the heating element, the belt — and the model code is on the rating plate under the door or on the back panel. The technician cross-checks both designations against the catalog and only then orders the unit. Mounting dimensions, connector, and fastening differ between similar series, so a visual match guarantees nothing. The same unit across different series may differ in fit and connector, so a "similar" part without verifying the number is a risk of a repeat visit. Ask the technician to show you the part number before installation — that way you can see the right part is being fitted, and the 1-year warranty on labor and parts confirms the technician's accountability.

How Daewoo models differ in repair

Model featureHow it showsWhat it means for repair
With displaycode on screenwe check against the model table
Without displaycode via indicatorswe decode by the indicator pattern
Brushed motorhas brushesbrush wear is possible
Sealed tubtub is one piecebearing isn't replaced separately

Why Daewoo washing machine repair makes sense

We've summed up what helps a Daewoo owner make a decision without extra steps: codes, common faults, a safe first step, and how to choose parts.

  • Drain and fill codes: E18 or F18 on Daewoo machines point to a drain problem, E17 and F17 to a water fill issue, but always check the meaning against the table for your specific model.
  • Checking by symptom: each fault has 2–3 likely sources that are checked from simple to complex — filter, hose, pump, valve, heating element.
  • Water in the drum: a safe first step is to unplug the machine and drain the water through the emergency hose behind the service panel, keeping in mind it may be hot.
  • Repair or replace: some components can be restored rather than replaced entirely, but the bearing in a sealed drum is not replaced separately.
  • Choosing a part: look up the part by number or model code so it fits your machine, not a similar one from the same series.

85brands

Besides Daewoo, we repair other washing machine brands in Astana

We work with washing machines of every brand sold in Kazakhstan — from Samsung, LG and Indesit to Beko, Haier, Artel and rare imported makes. Can’t find yours in the list? Call anyway — a technician will come and take a look.

We also repairWe also repairTECH SERVICE08

Besides Daewoo washing machine repair, we fix other equipment in Astana

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE09

Worth reading before Daewoo washing machine repair in Astana

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp