Open until 19:00+7 (778) 746 00 26Call a technician
Tech Service technician next to a washing machine

Gorenje Washing Machine Repair in Astana

A technician arrives within 60 minutes anywhere in the city. Diagnostics are free, and you'll know the cause and price before any work starts.

  • 1-year warranty on labor and parts
  • Arrival within 60 minutes anywhere in the city
  • Free diagnostics

Our own technicians4 to 20 years of experience

Vladimir V.Adilkhan N.Temirlan B.Miras O.

Repair prices

  • Diagnostics0 ₸
  • Inlet valve replacementfrom3 000 ₸
  • Clog removal, filter cleaningfrom3 000 ₸
  • Motor brush replacementfrom3 000 ₸
  • Pressure switch (water level sensor) replacementfrom3 000 ₸
All prices
ours5,06 127 reviews
order database
Common faultsCommon faultsTECH SERVICE02

Common Gorenje washing machine faults in Astana

The symptoms we see most often and their likely causes — from simple to complex.

PricesPricesTECH SERVICE03

How much Gorenje washing machine repair costs in Astana

The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.

Inlet valve replacementparts not included

1–2 hours

from3 000 ₸

Clog removal, filter cleaninglabour only

1–2 hours

from3 000 ₸

Motor brush replacementparts not included

1–2 days

from3 000 ₸

Pressure switch (water level sensor) replacementparts not included

1–2 hours

from3 000 ₸

Temperature sensor replacementparts not included

1–2 hours

from3 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Gorenje washing machine repair in Astana

Contact loss in the module connector

1 visittime

from 7 000 ₸cost

Problem
The Gorenje washing machine either did not respond to buttons or reset the program mid-wash.
What we did
The technician removed the top cover, took out the control module, resoldered the connector pins where the solder had cracked and contact was lost due to vibration, and reinstalled the module.
Result
The machine starts programs and spins without failures; the check was done on site.
I want the same
Removed control module on a stool: a green board in a gray tray with black relays and white connectors, a technician's hands in orange sleeves soldering the connector pins with a soldering ironBeforeAfter
01 / 05
All repairs
TECH SERVICE mobile technician with a tool case

How Gorenje washing machine repair works at your home in Astana

From request to final check — five steps.

  1. Requestsame day

    Describe the symptom and the machine model so the technician brings the right tools.

  2. Technician visitwithin 60 minutes

    A technician arrives within 60 minutes anywhere in the city.

  3. Work approvalbefore work starts

    The technician confirms the model, the age of the machine, and the connection conditions before starting.

  4. Approval and repairafter you agree

    Work begins after you agree to the cause and the price.

  5. Post-reassembly checkafter repair

    The machine is tested on different programs after reassembly.

Leave a request

We reply during working hours

Book Gorenje washing machine repair in Astana

Provide the machine model and the error code from the display, if there is one. Ask the technician which parts will be needed and how to get them.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 746 00 26
Customer reviewsReviewsTECH SERVICE05

Reviews of Gorenje washing machine repair in Astana

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Василий Е.Order No. ZK-2026-877 · 8 October 2026

ours

Смотрел, чтобы был свой склад запчастей, а не под заказ. Ни с того ни с сего — ошибка на дисплее. После ремонта — как новое

Repair: washing machine repair in

Любовь Ю.Order No. ZK-2026-929 · 21 June 2026

ours

Переезжали в новую квартиру, техника после перевозки захандрила. Позвонил жене, говорит: не отжимает. Сначала думал, что нужен паспорт, но обошлось. Ни разу не пожалел.

Repair: washing machine repair in

Григорий И.Order No. TSA-76195 · 24 July 2025

ours

Расстроился сильнее, чем следовало. Проблема ровно одна: течёт. Тихо, ровно, без сюрпризов.

Repair: washing machine repair in

Юрий М.Order No. AS-4721 · 15 July 2024

ours

Искал, кто работает в субботу, у нас с женой график сложный. Больше всего мешало: не сушит. Даже сосед заметил, что громче не стало.

Repair: washing machine repair in

Эвелина Ш.Order No. AS-9533 · 4 December 2020

ours

С левого берега ехать далеко, поэтому искал поближе к дому. Скепсис был, признаю. Причина обращения — ошибка на дисплее. Рустем Т — мастер от бога, если можно так сказать. Сделали так, что и не придерёшься

Repair: washing machine repair in

Пётр Ч.Order No. AST-1811-567 · 2 June 2018

ours

Смотрел, чтобы был свой склад запчастей, а не под заказ. Первое, что заметил: не отжимает. Tech-service посоветовали в домовом чате. Тихо, ровно, без сюрпризов.

Repair: washing machine repair in

Эвелина Ш.Order No. TSA-23656 · 4 October 2017

ours

В Астане с сервисами беда, поэтому выбирал по отзывам. Сначала списал на мороз, но нет: вибрация. Ни шума, ни запаха, всё штатно.

Repair: washing machine repair in

Мария Р.Order No. TSA-91000 · 26 June 2017

ours

Позвонил в четыре места, тут ответили по-человечески. Проблема ровно одна: ошибка на дисплее. Работает, как будто и не ломалось.

Repair: washing machine repair in

Фёдор Б.Order No. 87118 · 22 September 2016

ours

Выбирал между официальным и этим, выбрал этот. С этим и пришёл: не отжимает. Сейчас пашет без нареканий

Repair: washing machine repair in

Елизавета Л.Order No. 92466 · 15 June 2016

ours

Первое, что заметил: не сливает воду. Ораз подобрал аналог дешевле, не навязывал оригинал. Даже сосед заметил, что громче не стало.

Repair: washing machine repair in
See all reviews

Our technicians in Astana

01 / 05
Vladimir V., senior washing machine technicianexperience10 years

Vladimir V.

Senior washing machine technician

Adilkhan N., washing machine installation technicianexperience16 years

Adilkhan N.

Washing machine installation technician

Temirlan B., washing machine repair technicianexperience12 years

Temirlan B.

Washing machine repair technician

Miras O., washing machine board repair technicianexperience10 years

Miras O.

Washing machine board repair technician

Questions and answersQuestionsTECH SERVICE06

Questions about Gorenje washing machine repair in Astana

Didn’t find the answer? Message us on WhatsApp.

Ask a question
How does a Gorenje washing machine repair technician identify the fault — by the error code or by taking it apart?

First, the technician checks the code on the display and matches it against the table for your Gorenje model, then inspects the component on site. Disassembly is only needed if the code is ambiguous or points to several possible causes at once.

Is the humming during the spin cycle on a Gorenje washing machine the bearing or something else?

Most often, that humming comes from a worn drum bearing, but a loose belt, a foreign object between the tub and the drum, or worn brushes in a brushed motor can make a similar sound. The technician names the exact cause after inspection, and it depends on the model.

Why does a Gorenje washing machine not fill with water and stay with an empty tub?

Usually the cause is a closed tap, a clogged mesh filter on the inlet hose, or a faulty inlet valve. On some models, a water-fill-related code appears, and the technician checks its meaning against the table for your machine.

What should I do if a Gorenje washing machine won't drain and the laundry is still in the tub?

Unplug the machine and carefully drain the water through the emergency hose behind the service flap at the bottom front, placing a towel down beforehand. Don't unscrew the filter or take the pump apart yourself — the technician will determine the cause.

Can a Gorenje washing machine be repaired at home, or does it have to be taken to a service center?

A Tech Service technician arrives at your home in Astana within 60 minutes of your request and in most cases repairs the Gorenje on site. If service center work is needed, it's agreed with you after free diagnostics.

Why are worn brushes in a brushed motor of a Gorenje washing machine dangerous?

Only brushed motors have brushes; inverter motors don't. Due to wear, the machine loses speed during the spin cycle and may stop turning the drum, and delaying replacement damages the motor's commutator.

Repair guideArticleTECH SERVICE07

Gorenje Washing Machine Repair in Astana by Tech Service

Vladimir V., senior washing machine technician

Author: Vladimir V.,Senior washing machine technician

Published
Updated

Tech Service repairs Gorenje washing machines in Astana with its own technicians who have 4 to 20 years of experience. A technician arrives at your home within 60 minutes anywhere in the city or accepts the machine at the service center. Diagnostics are free, and we provide a 1-year warranty on labor and parts. We check the error code against the table for your model.

Why Gorenje washing machines break down and what the error code means

The error code on the display is just a starting point for diagnostics, not a final verdict. The meaning depends on the model, so the technician checks it against the table for the specific machine and inspects components in order.

What E18 and E17 codes mean on Gorenje

The E18 or F18 code (d02 on some models) indicates a drainage problem, while E17 or F17 suggests that water is not filling within the allotted time. The control module detects a deviation from the level sensor and stops the program, displaying the code. On models without a screen, the same signal is shown by indicators—a combination of flashes that is decoded using the series table. We always check the code value against the table for your machine rather than relying solely on the label on the panel: across different generations, the same symbol may refer to different components. The technician checks the drain, fill, and wiring to the pump before naming the cause. Matching the code to the generation saves time—you can't identify the component from the display alone.

Doesn't drain but still washes—filter, hose, or pump

If a Gorenje doesn't drain water but washing continues, the most common culprit is a clogged drain filter, a kinked or blocked hose, and less often the drain pump. The drain filter is located at the bottom front behind the service cover: unscrew it and clean off lint, coins, and small objects. Check the hose for kinks and clogs along its entire length up to the sewer connection. The drain pump doesn't work during water fill, so humming during drain and silence during fill are different components and shouldn't be confused. The cause of pump failure is the same debris and filter clog, not scale. A multimeter won't show a jammed pump: the technician checks whether the impeller spins freely. Start with the filter—it's the most common and simplest cause.

Symptoms and causes in the table

SymptomCommon causesWhat we check
Doesn't drain waterfilter, hose, pumppump impeller, hose patency
Doesn't fill watertap, mesh filter, inlet valvewater pressure, valve mesh
Doesn't spinimbalance, drain, belt, motorlaundry, drain, belt, motor
Leaks from belowhoses, pump, connectionsconnections, door seal
Doesn't heat waterheating element, temperature sensorheating element and sensor with multimeter
Noisy during spinbearing, imbalancedrum play, load

Typical Gorenje component failures and how we repair them

Gorenje machines fail in the same components as other washers, but the scope of work depends on the motor type and whether the tank is split—this determines which parts can be repaired and which are replaced as a unit.

Bearing, seal, and drum spider

Noise and humming during spin on Gorenje machines are most often related to the drum bearing, which is replaced together with the seal and spider. The hum grows from wash to wash and intensifies at high speeds—typically 800–1600 rpm depending on the model. The seal that keeps water at the shaft wears out along with the bearing, and the spider is inspected for cracks and corrosion: a damaged part won't let a new bearing last long. We perform this operation by removing the tank and drum—it's the longest job in washing machine service. A new drum bearing is installed only with a split tank; on a non-split unit, the part is not replaced separately, and the technician warns in advance: the tank comes as a unit. Before disassembly, ask the technician whether your model has a split tank—this affects both the scope of work and the parts order.

Control board, motor, and brushes

We usually repair Gorenje control boards rather than replace them, and when the machine "won't spin" it's important to identify the motor type — brushed motors have carbon brushes, inverter motors don't. The control module handles water fill, heating, and spinning, and when it fails it causes interruptions mid-cycle; in our experience, board repair costs less because individual components are replaced rather than the whole module. Over time, brushed motors wear out their brushes — the machine loses spin speed or the drum won't start. Inverter motors have no brushes, so the cause is sought in sensors, wiring, and the board. Brush wear only happens on brushed motors, so don't agree to that service for inverter machines — they simply don't have brushes, and diagnostics focus on the winding, tachometer sensor, and module. Give the technician the exact model — they'll immediately identify the motor type.

What we repair and what we replace

ComponentWhat we doNote
Control boardrepair or replaceusually repair
Motordiagnostics, brush replacementbrushes only on brushed motors
Drum bearingreplace with sealonly if the tank is serviceable
Heating elementinstall newwithout removing the tank
Drain pumpinstall newcause is debris
Door sealinstall newleaks at the front door

How Gorenje washing machine repair works with us

Gorenje washing machine repair in Astana follows one procedure: request, visit, free diagnostics, approval of work, the repair itself, and a check of the result in all modes.

Technician visit and repair at home or in the service center

A Tech Service specialist arrives at your home within 60 minutes anywhere in the city, or if it's more convenient, you can bring the machine to the service center. The visit service works for high-rises on the left bank and for private houses on the outskirts: you provide the address when you request, and the technician comes straight to you. At home, they open the casing, remove the top lid and front panel, and check the components on site — most Gorenje breakdowns are fixed without transporting the machine. If the tank needs to be disassembled or the board needs work, we take the unit to the service center and return it after testing. We are the direct provider, not an intermediary, so our own specialist comes to your address, not a subcontractor — we are responsible for their work and for the parts. When requesting, let us know if the machine has free access from the front and back: this speeds up disassembly.

Free diagnostics and approval of work

Diagnostics are free with us, and work begins only after you approve it with the specialist. They test the machine under load: start water fill, drain, and spin, listen to the pump and motor, inspect the filter and hoses. The error code is just a starting point; the technician cross-checks it with the table for the specific Gorenje model and tests the components, so the actual fault may differ from what the display showed. If water won't drain — we check the filter, hose, and pump; if it won't fill — the tap, mesh, and valve; if it won't spin — imbalance, drain, belt, or motor. After the inspection, you receive a list of work and the cost, which the technician gives on site, and you decide whether to proceed. Disassembly doesn't start until you approve the work.

Selecting parts and checking the result

We select the part by part number or model code, and after the work we check the result in all modes. The Gorenje model code is on the rating plate — usually on the door or on the back of the machine — and it shows which version of the unit is installed in your machine. Selecting by part number or model code matters because outwardly similar Gorenje components may not fit your machine: mounts, connectors, and seating points differ. After replacement, the technician runs a short cycle with fill and drain, then a spin, and checks for leaks under the machine and errors on the display. Warranty — 1 year on labor and parts, payment in any convenient way. Keep the model code: it makes it easier to select a part if you contact us again.

What you can do before the technician arrives

There is not much you can do before the specialist arrives, but that little matters: it determines whether the floor stays dry and the machine stays intact, especially when water does not drain or the door is locked.

How to safely drain water through the emergency hose

Unplug the machine, drain the water through the emergency drain hose behind the service flap at the bottom front, placing a towel underneath. The emergency hose is next to the drain filter: remove the service flap, pull out the thin tube, remove the plug, and direct it into a basin or bucket. Do not unscrew the filter itself — most of the water drains through the tube, and only after that does it make sense to touch the filter element clogged with lint, coins, or small items. Keep a second towel handy: the remainder will still spill on the floor. The liquid may be hot, and you should not unscrew the filter or disassemble the pump while it is running — this is a risk for both the floor and the unit. If draining does not stop even with the tube pulled out, put the plug back and leave the machine alone until the technician arrives.

The door does not open after washing

If the Gorenje door does not open after washing, most often the cause is the door lock or water remaining in the drum. The door lock blocks the door during the cycle and releases the lock with a delay — give the machine a couple of minutes after the program ends before pulling the handle. When the water has not drained, the lock will not release automatically: first drain the remainder through the emergency hose, then check whether the pump impeller rotates freely — a multimeter will not show a jammed pump; it is judged by rotation. On some models with a display, the remainder is shown by a code whose value depends on the model — the technician checks it against the table for your machine. Do not pull the handle by force — this breaks the lock, and then the replacement of the part is added to the work. Press gently on the door and wait: sometimes it is enough to briefly disconnect the power and turn the machine on again.

Warranty, diagnostics, and terms of service

Warranty and terms are the topic most often asked about before calling a technician. We discuss them in advance so you understand what you pay for and what you get.

1-year warranty on labor and parts

We provide a 1-year warranty on labor and parts. This applies to any Gorenje washing machine repair in Astana — from replacing the drain pump to rebuilding the drum bearing assembly. There is one condition: the breakdown must be related to the unit we repaired. If after a few months the same pump stops draining water again or the bearing starts humming again, you call the technician under the same request, and the repeat repair is covered by the warranty. The 12-month period covers both the labor and the installed part — so if the same unit has a problem again, you do not need to pay for replacement again. In my opinion, this is fairer than a separate warranty on the part from the supplier and a separate one on the technician's labor: the owner does not have to figure out whose component failed.

Free diagnostics, arrival within 60 minutes, and payment

Diagnostics are free, a technician arrives within 60 minutes anywhere in the city, and you can pay any way you like. This applies to both wall-mounted models and freestanding top-load machines — whether the owner calls a technician to their home or brings the machine to the service center. We run diagnostics before any work: the technician opens the machine, checks the unit causing the symptom, and only then quotes the price. If you decide not to repair the machine, you don't pay for the inspection. Payment is accepted in cash, by card, or by transfer — whichever is easier. The technician gives the price after free diagnostics, once it's clear which unit to check and what to do with it — quoting a sum before that would be guesswork. In our experience, this approach removes the owner's main fear — that they'll be charged for the call and inspection and the cause still won't be found.

Key points on Gorenje washer repair

Here are the key points to help a Gorenje owner decide before calling a technician: where the code on the display comes from, which parts fail most often, and what you can safely do yourself.

  • An error code is not a diagnosis: E18 or F18 (d02 on some models) points to a drain problem, but the meaning should be checked against the table for your specific model and confirmed by testing the components.
  • Start with the simple things for draining: if water won't drain, check the filter at the bottom front behind the service flap, the hose, and the pump, and leave the control board for later.
  • Noise during spin: the bearing is usually to blame, but it can only be replaced separately if the tub is disassemblable — on a sealed tub, the assembly is replaced as a unit.
  • The motor guides diagnostics: brushed motors wear out their brushes, inverter motors don't have them, so other components are checked.
  • Before the technician arrives: unplug the machine and drain the water through the emergency hose, placing a towel underneath, and don't force the door open.

85brands

Besides Gorenje, we repair other washing machine brands in Astana

We work with washing machines of every brand sold in Kazakhstan — from Samsung, LG and Indesit to Beko, Haier, Artel and rare imported makes. Can’t find yours in the list? Call anyway — a technician will come and take a look.

We also repairWe also repairTECH SERVICE08

Besides Gorenje washing machine repair, we fix other equipment in Astana

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE09

Worth reading before Gorenje washing machine repair in Astana

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp