experience10 yearsVasiliy Z.
Senior TV repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 096 52 04Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
A technician arrives within 60 minutes anywhere in the city. Free diagnostics.
Our own technicians4 to 20 years of experience




Repair prices
Below are typical symptoms and likely causes. The technician will pinpoint the exact cause during free diagnostics.
discharged battery, power controller failure
from5 000 ₸
worn connector, faulty cable
from8 000 ₸
impact, drop, cracked touchscreen
from7 000 ₸
dirt, worn flex cable, oxidation
from5 000 ₸
damaged touchscreen, flex cable failure
from5 500 ₸
antenna failure, damaged flex cable
from11 500 ₸
damaged module, dirty lens
from11 500 ₸
clogged mesh, moisture damage
from7 000 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1–2 hourstime
from 8 000 ₸cost

BeforeAfter5 steps

Five steps from request to final check.
Send a request with your model and symptom. The technician will confirm a convenient time.
The technician arrives anywhere in the city within 60 minutes after confirming your request.
The technician checks the device and identifies the cause before starting any work.
The technician gives you the final repair price before work begins, so you can decide whether to proceed.
Work starts once the scope and price are approved. 1-year warranty on labor and parts.
The digital device repair department in Almaty has 7 technicians with 7 to 18 years of experience.

The department has 7 specializations — they are listed on the technicians' cards.
experience10 yearsSenior TV repair technician
experience10 yearsTV board repair technician
experience10 yearsElectromechanical technician
experience13 yearsAudio and DVD repair technician
experience18 yearsSmartphone repair technician
experience8 yearsScreen and battery replacement technician
experience7 yearsGame console repair technician
We reply during working hours
Send a request and the technician will arrive within 60 minutes anywhere in the city. Diagnostics are free, with a 1-year warranty on labor and parts. Confirm a convenient visit time with the technician.

Warranty question? Call us
+7 (778) 096 52 047 898 reviews of repairs at TECH SERVICE in total
Руслан Д.Order No. 2025-5612 · 13 February 2025
oursХотел сначала вызвать мастера на дом, потом передумал. Симптом был очевидный: глючит тачскрин. Ребёнок уже проверил на прочность, держится.
Андрей П.Order No. TS-2406-882 · 19 July 2024
oursДруг посоветовал, у него похожая история была. Симптом был очевидный: не реагирует на перо. С тех пор ни разу не подвёл.
Елена К.Order No. TS-1162 · 11 April 2024
oursРемонт графического планшета — вот с этим и пришёл. Повод для визита: не определяется компьютером. Нужна была замена: перо. Вышло дешевле нового, что логично. Посмотрели, назвали срок — два дня. Второй месяц — полёт нормальный.
Тимур А.Order No. ZK-2024/554 · 31 March 2024
oursДолго откладывал ремант, потом всё-таки собрался. Починили и дали гарантию на месяц.
Эльмира Т.Order No. 74742 · 13 December 2021
oursБыло подозрение, что дело в плате, хотелось услышать второе мнение. Симптом был очевидный: сбилась калибровка. Сделали аккуратно, следов разборки не видно.
Максат О.Order No. TS-6973 · 6 October 2020
oursПервое, что заметил: не держит заряд. Турарбек Кайрош принял, посмотрел и сразу сказал, что делать. В тех сервис привёл знакомый, у него тут чинили ноут. Все разъёмы на месте, ничего не люфтит.
Елдос К.Order No. 170941 · 27 April 2019
oursСмотрел, у кого есть запчасти на такую модель. Вечером включил — и всё стало ясно: глючит тачскрин. Оплатил картой, чек дали. Нужна была замена: аккумулятор. Внешне как новый, если не считать мелкой царапины.
Аружан К.Order No. TS-6325 · 5 March 2019
oursДамир М перезвонил, когда всё было готово. Функции все на месте, ничего не отвалилось)
Алишер У.Order No. ZK-6271 · 28 December 2018
oursБыло подозрение, что дело в плате, хотелось услышать второе мнение. Даже настройки не сбились, что удивительно.
Виктор Ф.Order No. TS-1805-262 · 26 July 2018
oursТехника на гарантии уже не была, так что выбор был свободный. Проблема — сбилась калибровка. Отдельно спасибо мастеру — Дамир М, терпения ему хватило. Уже полгода — ни одного сбоя.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionApple offers the base iPad, iPad mini, iPad Air, and iPad Pro — they differ in screen size and specs. Before repair, the technician confirms the model, since disassembly and parts vary across the lineup.
If the image is visible but touch doesn't work, the touch layer is usually at fault; if there's no image or there are lines, it's the display. The exact answer comes from free diagnostics, after which the technician tells you what to replace.
Lines usually point to damage to the matrix or display cable, not a system glitch. It depends on the model: sometimes resoldering the cable helps, sometimes a screen module is needed.
A broken iPad Pro 12.9 screen is repaired by replacing the screen module, and this is usually cheaper than buying a new tablet. During free diagnostics, the technician will check whether the board was affected after the drop.
When swollen, the case bulges, the screen lifts, or a gap appears — you can see this without tools, unlike a simple discharge. Using such an iPad is dangerous; it's best to show it to an iPad repair technician right away.
Yes, after a drop with a cracked screen, the iPad is repaired by replacing the glass or display depending on the damage. During free diagnostics, the technician will determine what exactly to replace and confirm the work.
Tech Service repairs iPads of all lines in Almaty as a direct provider: a technician arrives at your home within 60 minutes or the work is done at the service center. Diagnostics are free, the technician gives you the price after diagnostics, and there is a 1-year warranty on labor and parts. Technicians have 4 to 20 years of experience.
The iPad screen consists of several layers, and the scope of work depends on which one is broken. Here's how to tell a broken glass from a broken display and what parts are replaced in each case.
We look at the image: if the picture is intact and bright, and the cracks are only on the surface, the glass (touchscreen) is usually replaced, while the matrix stays. The glass on an iPad covers the sensitive layer on top of the matrix and holds the Multi-Touch grid, so when it's damaged, input suffers, not the image output. We check it like this: run a finger across the entire area and note where the response disappears or lags, and look at an angle to the light for dark smudges under the crack — they indicate matrix damage. We also look at the corner of impact: if the shards have crumbled and your finger catches on the edge, the touchscreen will almost certainly have to be removed entirely. Delaying with a crack is risky — shards and moisture through the chips gradually reach the flex cables, and then matrix work is added to the glass replacement. If you're interested in how much iPad repair costs in each of these cases, the technician gives the price after free diagnostics.
We replace the display (matrix) when there are colored stripes, dark spots, "dead zones" on the screen, or the backlight is gone — this is already the image output layer, not the touch panel. The display backlight gives an even white background: if it turns gray or yellowish at the edges, the layer has worn out even without external cracks. We also check Face ID and Touch ID separately — their modules sit next to the screen flex cables and often suffer from impact along with the matrix. Dead pixels and rainbow smudges in the center also point to the matrix: polishing and replacing the top layer won't help here. After the screen replacement, the technician separately checks Face ID and Touch ID and the response across the entire area — if this isn't done right away, the failure will show up at handover.
| Symptom | What is likely damaged | What we check |
|---|---|---|
| Cracks, image intact | Glass (touchscreen) | Response across the entire area |
| Colored stripes, spots | Display (matrix) | Backlight and flex cables |
| No backlight, dim | Display, backlight | Power and flex cable |
| Response disappears in places | Touchscreen, flex cable | Multi-Touch, contacts |
| Chip on corner, input glitches | Glass and housing | Mounting and flex cables |
No reaction to the button is a symptom, not a diagnosis: it could be the connector, battery, board, or even a software glitch. Here's the step-by-step troubleshooting logic.
During free diagnostics, we first check the power chain — charging port, cable, and adapter, then the battery and board, so we don't replace parts at random. The port wears out from frequent connections: contacts oxidize, and current stops reaching the power controller. We check the battery by its behavior under load — it may show a charge but not deliver it. We inspect the board for signs of oxidation and damaged components, especially if the device has been exposed to moisture or impact. iPad repair starts with this chain because the external symptom is the same for the battery and the board — the tablet is dead. Often a "dead" device comes back to life after replacing the port or battery, and only testing shows the board's integrity.
Freezing on the logo can be caused by either software or hardware issues, so we first try software recovery and reflashing, and if that doesn't help, we look for a problem on the board. A software glitch often occurs due to a failed update or a sync error: the device gets stuck on the start screen and doesn't reach the home screen. We perform software recovery only with the owner's consent, since the procedure may erase data—it's best to back it up beforehand. If reflashing doesn't help, the technician checks the board and power circuits, and also tests the controller responsible for system startup. We also assess how the device behaves when charging and under load: cyclic reboots during those times are more often related to power drops rather than the system. When a tablet freezes specifically under load or during charging, it usually points to hardware rather than firmware.
Moisture and impact are the two most common scenarios of tablet damage. The diagnostic approach and urgency differ, and that determines which components can be saved.
If an iPad gets into water, we first check for contact oxidation and board damage, because moisture continues to work inside even after the device has dried on the outside. Liquid seeps through the seams of the case and settles on connectors, flex cables, and board contact pads; a thin film of oxidation gradually impairs conductivity. The touchscreen is usually the first to fail: the Multi-Touch layer starts responding with a delay, "jumps," or doesn't respond to touches in certain areas. Moisture in the charging port causes false triggers and disconnections when connecting the cable. If you're unsure whether to take the device to a service center, it's better to show an iPad that has been in water to a specialist as soon as possible. A device that works but has a glitchy touchscreen after water exposure is better not to dry out on your own—oxidation eventually reaches the flex cables and board, and then simple cleaning won't be enough.
When there's an impact, we check not only the screen but also the case and mounts, because deformation of the frame can prevent the new glass from seating properly. The aluminum case flexes when hit on the corner and retains a micro-bend, and the display seating area loses its geometry. If the image is intact after the impact, it's often possible to get by with replacing the glass and straightening the case without touching the matrix. The technician removes the damaged layer, straightens the frame, and checks the touchscreen and display for gaps and spots. A crack running through the button or camera area requires a separate check of the flex cables: the impact could have affected not only the glass but also the internal connectors. At Tech Service, we straighten the case before installing new glass—otherwise the new layer sits crooked and cracks at the first touch.
| Scenario | What suffers first | What we check |
|---|---|---|
| Moisture exposure | Contacts, board, flex cables | Oxidation, touchscreen glitches |
| Drop | Screen, case, mounts | Cracks, frame deformation |
| Moisture and drop together | Both components and case | Everything, one after another |
A direct contractor is a technician who comes to you or handles the device in the service center without intermediaries between you and the work. Here's what the process involves and what exactly the warranty covers.
A technician arrives at your home within 60 minutes anywhere in the city, or you can bring the device to the service center — you choose the method, but the person doing the work is the same. This kind of iPad repair in Almaty covers both urgent tasks and cases that require careful work with the board. The on-site technician performs typical operations on the spot: replacing the display, glass, connectors, and battery. The one who works on-site can take the device apart, test the flex cables, and check the device before returning it to the owner. A home visit doesn't mean "quick and by eye": the inspection protocol is the same, only the location changes. The service center is more often chosen for complex cases involving the board — there the work is done in the service center, not on-site. If you're unsure between an on-site visit and the service center, tell us the model and the symptom — we'll advise where the task can be solved without extra transportation and loss of time.
Diagnostics are free: we check the device, state the cause and the cost, and work begins only after approval. First, a visual inspection and questions about symptoms — was there a drop before the breakdown, did the tablet come into contact with water. Then we check the screen, connectors, battery, and board to separate external faults from internal ones. As a result, you get a clear picture: which part failed, which components are being replaced and why. The technician gives the cost after free diagnostics — before the device is disassembled for replacement. Approval before work protects you from surprises: you know in advance where the problem is and why a particular part is needed, and you can refuse without consequences. Some disputable cases are resolved at this stage — sometimes it's enough to clean a connector or reconnect a flex cable, and no replacement is needed. If the cause requires parts, we explain which ones will be replaced.
The final amount depends on several factors, and it can only be named accurately after inspecting the device. We explain what influences the estimate and why the technician doesn't give a figure over the phone.
The cost depends on the model, the damaged component, and the scope of work, so the technician names it after free diagnostics, not over the phone. We disassemble the device, check the power, flex cables, and board condition, and then explain which parts need replacement and why. The same breakdown on different lines is solved differently: iPad Air and iPad Pro have different mounts, connectors, and display removal methods, and on older models some components are replaced as a unit. The scope of work also matters: replacing just the glass and water damage recovery are tasks of different scale. The estimate also includes the fact that after water exposure, the entire power circuit is checked, not just the affected area. The exact figure appears only after inspection, since outwardly similar symptoms point to different causes.
The iPad model is identified by the A number on the back cover, and from it the technician understands which parts fit and what scope of work is ahead. We check the number against a compatibility table: the same screen diagonal appears in different generations, and their connectors and flex cables are not interchangeable. The line also matters — iPad mini, Air, Pro, and base versions are assembled differently, and this affects how many components must be removed to reach the damaged area. Models with an adhesive-fitted display require more operations to remove than earlier screw-fitted versions. If the device is old, diagnostics will show whether servicing is worthwhile: sometimes replacing a component makes less sense compared to a new device.
In short, here's how to predict the outcome of a repair: proper diagnosis of the cause rather than replacing parts at random, and understanding which scenario the breakdown falls under.
19brands
We work with Apple tablets, from the compact mini to the powerful Pro. Find your model on the brand page.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your phone won't charge, start by checking the adapter, cable, and port, then the charging settings.
16 February 2026 · 12 minutes read
If your phone falls in water, take it out right away, turn it off, and don't charge it.
19 January 2026 · 12 minutes read
If your phone camera isn't working, first check app permissions, clear the cache, and restart your phone — this fixes some software glitches.
24 December 2025 · 13 minutes read
If your phone won't turn on, first check the charging setup: try another cable, adapter, and port, leave the device on charge, and attempt a forced restart.
3 October 2025 · 12 minutes read
If your laptop screen is broken, turn the device off first, don't press on the display, and check the picture through an external monitor.
12 March 2026 · 11 minutes read
If your laptop freezes, the first thing to do is restart it and check Task Manager to see what's loading the CPU and memory.
25 January 2026 · 12 minutes read












