experience10 yearsMaksim S.
Graphics card repair technician
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 021 13 16Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
Free diagnostics, a technician at your door within 60 minutes anywhere in the city. 1-year warranty on labor and parts.
Our own technicians4 to 20 years of experience




Repair prices
Eight common symptoms in BenQ projectors, from no power to spots on the image. The technician confirms the cause during free diagnostics.
power, lamp, fuse
from7 500 ₸
thermal protection, filter, fan
from2 500 ₸
clogged filter, fan, sensor
from2 500 ₸
lamp, ballast, signal cable
from7 500 ₸
dust on the matrix or in the optics
from6 000 ₸
lamp life, ballast, power
from7 500 ₸
bearing, dust, mounting
from5 500 ₸
capacitors, fuse, circuit
from7 500 ₸
The table lists the 'from' price for labor, for common jobs also the 'from' price of the part, plus the time required to complete the job.
1–2 daystime
from 9 000 ₸cost

BeforeAfter5 steps

Five steps from request to checking the projector after repair.
Describe the model and symptom — the technician will prepare for the visit and bring the necessary parts.
A technician arrives within 60 minutes anywhere in the city and works on-site at the customer's location.
Diagnostics are free — the technician identifies the cause and cost, and agrees with you.
The technician performs the work and tests the projector with a signal source.
The technician demonstrates the projector working with a test signal and explains what to check in the first days of use.
The computer and laptop repair department in Almaty has 7 technicians with 6 to 15 years of experience.

The department has 7 specializations — they are listed on the technicians' cards.
experience10 yearsGraphics card repair technician
experience6 yearsPC and laptop diagnostics technician
experience8 yearsLaptop repair engineer
experience10 yearsSoftware installation specialist
experience7 yearsPC and laptop repair technician
experience13 yearsDiagnostics and virus removal specialist
experience15 yearsConsultant
We reply during working hours
Describe the issue over the phone: the technician will arrive with tools and test equipment. Before starting work, they will confirm the cause of the breakdown and the final repair cost.

Warranty question? Call us
+7 (778) 021 13 167 898 reviews of repairs at TECH SERVICE in total
Николай Ч.Order No. ZK-2026/322 · 8 February 2026
oursПробовал найти мастера в своём районе, но все были заняты. С чем пришёл: шумит. Сергей Архипов приехал в тот же день, хотя был конец смены. Уже полгода — ни одного сбоя.
Индира П.Order No. TS-2609-518 · 7 January 2026
oursОтдельно спосибо мастеру — Дамир М, терпения ему хватило. Внешне как новый, если не считать мелкой царапины.
Данияр С.Order No. ZK-4978 · 10 September 2022
oursПрочитал кучу отзывов, половина — реклама, но тут вроде живые. Была паника, если честно. Проблема — шумит. Из деталей — лампа. Функции все на месте, ничего не отвалилось.
Дмитрий Л.Order No. ZK-2020/837 · 14 September 2020
oursБыло подозрение, что дело в плате, хотелось услышать второе мнение. Симптом был очевидный: тускнеет картинка. Работает как раньше, придирок нет)
Талгат С.Order No. TS-2083 · 28 May 2020
oursПробовал найти мастера в своём районе, но все были заняты. Симптом был очевидный: шумит. Все разъёмы на месте, ничего не люфтит
Талгат С.Order No. 2018-7095 · 29 April 2018
oursИскал мастерскую поближе к дому, чтобы не мотаться с техникой через полгорода. По деньгам вышло адекватно, в другом месте просили больше. Работает как раньше, придирок нет.
Тимур А.Order No. TS-1610-748 · 11 May 2016
oursПоломка застала перед командировкой, тянуть было нельзя. Первое, что заметил: шумит. Проверил дома — всё на месте, ничего не забыли.
Павел Ш.Order No. TS-1611-493 · 9 May 2016
oursЦена имела значение, но и горонтия тоже. Жена сказала выкинуть, я решил сначала показать мастеру. Проблема — тускнеет картинка. Поставили новую деталь: блок питания. Посмотрели, назвали срок — два дня. Починили и дали гарантию на месяц
Сабина Г.Order No. 48141 · 1 April 2016
oursПовод для визита: шумит. Дамир М взялся за то, от чего другие отказались. Второй месяц — полёт нормальный!!
Марина В.Order No. 459684 · 1 April 2016
oursПоломка застала перед командировкой, тянуть было нельзя. Больше всего напрягало: не включаеться. Все разъёмы на месте, ничего не люфтит.
Didn’t find the answer? Message us on WhatsApp.
Ask a questionYes, in most cases it can be fixed: the cause is often the lamp, HDMI cable, color wheel, or board. A technician will check the signal source and optics, depending on the model, and will provide an estimate after diagnostics.
A red indicator usually points to a power issue, lamp problem, or overheating, and the exact meaning depends on the model. Check the power cable and let the projector cool down; if that doesn't help, a technician's diagnostics are needed.
Yes, it can be fixed: the cause is usually dirty optics or a color wheel failure, depending on the model. A technician will clean the optics or replace the unit and check the image on the screen.
A dim image is most often due to lamp wear, dirty optics, or a clogged filter. A technician will check the lamp and optics and tell you whether replacement is needed or cleaning is enough.
Yes, if it's overheating or there's a cooling failure, continued use speeds up wear on the lamp and components. It's better to turn off the projector and call a technician for diagnostics to avoid an expensive repair.
Yes, a technician comes to your home within 60 minutes anywhere in the city, and diagnostics are free. Some work is done on-site, the rest at the service center, with a 1-year warranty on labor and parts.
Tech Service repairs BenQ projectors in Almaty: our technician arrives at your home within 60 minutes or takes the device to our service center. Diagnostics are free, and the technician provides the cost after diagnostics. We give a 1-year warranty on labor and parts. We understand error codes and typical failures of lamp-based models.
Failure to turn on is the most common reason for contacting us about BenQ projectors. Here's what the technician checks first, how to read the indicator signals, and why you shouldn't immediately expect a board replacement.
The red indicator on a BenQ projector most often signals that protection has triggered — for power, temperature, or lamp — and diagnostics reveal the exact cause. On MX and MS series models, the indicator either lights steadily or blinks with pauses: a steady light usually points to the lamp and its circuit, a series of short flashes to the power supply unit, and a combination with a blinking green light accompanies an attempt to exit protection mode. BenQ error codes are read by the number and rhythm of flashes, and this decoding is different for each series — you can't transfer values from one model to another. The color and blinking pattern of the indicator narrow down the search before disassembly, so it's important for the technician to know whether it blinks steadily or with pauses — record the rhythm on video before contacting us.
After a power surge, BenQ projectors most often suffer damage to the power supply, less often to the main board, and repairs start with checking the input circuits. A voltage spike can blow the varistor and input capacitors, and with a severe drop the voltage reaches the PWM controller and switching transistors — then the projector won't come out of standby and the indicator stays red. In our experience, such calls across the city are a regular occurrence after thunderstorms and substation accidents, and in most cases the work is limited to the power section without replacing the entire board. A technician arrives at your home within 60 minutes, performs free diagnostics, and quotes the price after inspection. If your equipment is connected to an unstable power grid, it's worth considering surge protection — that's cheaper than replacing a burned-out module again.
Overheating, noise, and image defects are the second most common group of complaints about BenQ projectors. Here's what each symptom points to and what the technician checks first.
Overheating and emergency shutdown on BenQ projectors are usually caused by a clogged filter and cooling fans — we check those first. Dust clogs the filter cells, airflow drops, the temperature inside the case rises, and the protection turns off the lamp long before the session ends. The fans may also hum louder than usual or, conversely, stop due to bearing wear. On models with a temperature sensor, an error appears on screen or the indicator blinks, but the sensor itself can sometimes be wrong — we compare its readings with the actual case temperature and the airflow at the vent. We also inspect the air ducts separately: compacted dust on the heatsink fins retains heat even after the filter is replaced. If the equipment is used in a dusty room, preventive cleaning extends lamp life and reduces the risk of repeated overheating.
| Symptom | What it indicates | What we check |
|---|---|---|
| Local spot | Contaminated optics, dust on the lens | Condition of the lenses and light tunnel |
| Colored "rainbow" | Color wheel problem | Wheel segments and its drive |
| Uniform dimness | Lamp wear | Operating hours, condition of the electrodes |
| Colored halo at the edges | Misalignment of the wheel or lens | Alignment of the optical unit |
| Dark stripes | Degradation of the matrix or DMD chip | Image processing board |
A white or blue screen and "no source found" on a BenQ can be either a setting or a faulty port or board — we check both. First we rule out the obvious: wrong input in the menu, a laptop that has gone to sleep, a cable with a broken wire. Then we test the HDMI port with another source and the VGA input separately — this shows whether the connector is broken or the signal reception on the main board is failing. If the picture disappears intermittently, the cause is often a loose socket: the contact breaks at the slightest movement of the cable. Resolution and refresh rate settings can also cause a black screen when the source outputs a format the projector doesn't accept. Before taking the projector to a service center, it's worth checking the cable and trying another source — sometimes the problem is in the connector, not the device.
The lamp, air filter and optics are consumable parts that affect picture brightness and the device's lifespan. Here's when replacement is needed and when cleaning is enough.
If the picture gradually dims but the projector turns on reliably, it's usually the lamp; if it won't start or shuts off after a few seconds, we check the power supply. Installing a new BenQ light source takes us less time than troubleshooting the power circuit and doesn't require disassembling the case down to the board. Signs of wear: a dimmed picture, a yellowish or pinkish tint, uneven illumination in the corners of the frame, and messages about exhausted lamp life in the service menu. A faulty power supply looks different — clicking on startup, shutting down under load, no response to the power button. The lamp is a consumable with a limited lifespan, so replacing it with a warranty on labor and parts is more cost-effective than trying to stretch it until complete failure, when overheating affects neighboring components. In my opinion, waiting until the last minute costs more here: one overheated fan leads to another.
| Job | Where we do it | What we check |
|---|---|---|
| Lamp replacement | On-site | Base and model compatibility |
| Filter and optics cleaning | On-site | Airflow and even illumination |
| Image adjustment | On-site | Geometry, focus, color reproduction |
| Power board soldering | In the service center | Integrity of traces and components |
| Color wheel diagnostics | In the service center | Wear of segments and bearing |
A clear process removes the owner's main worry — what will happen to the device and how long it will take. Here are the steps from request to pickup with a warranty.
Service starts with free diagnostics: a technician finds the cause and gives you the price, and work begins only after you approve it. Diagnostics cover the power supply, lamp, optical path, control board, and connection ports — we check the chain step by step, not at random. The cost depends on which component has failed, so the exact amount can only be quoted after inspection, not over the phone. Approval works both ways: you see exactly what needs replacing and decide whether to go ahead. This approach eliminates the situation where the price suddenly jumps after disassembly. In our experience, half of all requests are resolved with cleaning and adjustment without replacing parts — it's cheaper and faster than a full repair cycle. If a component is working, we don't suggest replacing it just to pad the job.
We provide a 1-year warranty on both labor and parts. That's twice as long as the typical three months offered by services in the city and covers both components: the replacement itself and the installed part. A parts warranty means that if the same component fails again, it's replaced without charging for labor again. This applies to the lamp, power supply, control board, and other components we installed. For the owner, it's a practical guideline: if the projector starts behaving the same way as before the service, the request is handled under warranty, not as a new order. We record which component was replaced so that on a repeat visit the technician immediately sees the device's history. In my view, a one-year warranty is a fair term: it's enough time for both a manufacturing defect and installation errors to show up.
Our technicians have 4 to 20 years of experience and understand the error codes and common failures specific to BenQ, not just general projector principles. Brand specialization cuts diagnostic time: the technician already knows which BenQ components fail more often and doesn't waste time checking circuits that are obviously fine. A red indicator, a blinking lamp, failure to turn on after a power surge — each signal on this brand reads as a specific hypothesis, not a reason to take the whole device apart. Four-plus years of experience means the person has handled dozens of devices of this brand, not learning on your projector. At our service, BenQ projector maintenance is handled by a specialist who works with this line constantly. When choosing a repair provider, ask how many devices of this exact brand they've disassembled — a generic answer to that question sounds evasive.
We explain how on-site visits work in the city, when home repair is more realistic than a trip to the service center, and what to do with older BenQ models.
A technician arrives at your home within 60 minutes anywhere in the city, performs free diagnostics, and immediately tells you what can be done on the spot. This format covers BenQ projector repair in Almaty without hauling the device across town and waiting for it at the service center. During the visit, the technician checks the lamp, filter, ports, tries to power on the device, and assesses the indicator behavior. Some issues are resolved right at your place: lamp replacement, filter cleaning, signal source setup, HDMI cable check. If the cause is deeper — a faulty power board or control controller — the device will still need to go to the service center, where there are proper conditions for disassembly and component testing. In our experience, on-site visits more often save time on surface-level issues. Before the visit, have the remote and power cable ready — it speeds up diagnostics.
Lamp-based BenQ models, including the MX560, are repairable when typical faults occur, and the question of whether to fix or replace is decided after diagnostics. The MX560 is a classic lamp projector with a separate power supply and optical path, where most components are serviceable rather than sealed into a single module. Typical failures for such devices include lamp wear, a dusty filter, overheating due to a stopped fan, and power supply board issues. Older models behave predictably: if one component fails, restoration usually gets the device working again, but if several fail at once, the decision is made based on the overall picture. Choosing restoration usually makes sense when one component is faulty rather than several at once. In my view, with these models it's worth diagnosing the cause first and then deciding the device's fate.
Here's the key information a BenQ projector owner should keep in mind before contacting a service center: what the diagnosis depends on, what symptoms indicate what, and how the repair process works.
18brands
BenQ projectors are our main focus; other brands with dedicated pages on the site are listed alongside.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your laptop screen is broken, turn the device off first, don't press on the display, and check the picture through an external monitor.
12 March 2026 · 11 minutes read
If your laptop freezes, the first thing to do is restart it and check Task Manager to see what's loading the CPU and memory.
25 January 2026 · 12 minutes read
If your computer won't turn on, start simple: check the outlet, power cable, switch on the power supply, and the power button.
19 January 2026 · 13 minutes read
If your laptop won't boot, first determine which of two states you're in: the device doesn't respond to the power button at all…
13 December 2025 · 12 minutes read












