Open until 19:00+7 (778) 021 11 78Call a technician
Tech Service technician next to a oven

Gorenje Oven Repair in Astana

A technician will come and fix the oven issue. Diagnostics are free, with a 1-year warranty on labor and parts.

  • 1-year warranty on labor and parts
  • Arrival within 60 minutes across the city
  • Free diagnostics

Our own technicians4 to 20 years of experience

Beknur D.Yerkimbek S.Vladimir V.Ozat K.

Repair prices

  • Diagnostics0 ₸
  • Door seal replacementfrom3 000 ₸
  • Temperature sensor replacementfrom4 500 ₸
  • Heating element replacementfrom5 000 ₸
  • Mode switch replacementfrom5 000 ₸
All prices
ours5,06 127 reviews
order database
Common faultsCommon faultsTECH SERVICE02

Common Gorenje oven faults in Astana

Symptoms that Gorenje oven owners most often report, and their likely causes.

PricesPricesTECH SERVICE03

How much Gorenje oven repair costs in Astana

The table shows prices for Gorenje oven repair in Astana: the labor cost "from" without parts and the timeframe; the technician confirms the final amount before starting the repair.

Door seal replacementparts not included

1–2 hours

from3 000 ₸

Temperature sensor replacementparts not included

1–2 hours

from4 500 ₸

Heating element replacementparts not included

1–3 hours

from5 000 ₸

Mode switch replacementparts not included

1–2 hours

from5 000 ₸

Wiring repairparts not included

1–3 hours

from5 000 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Gorenje oven repair in Astana

Not reaching temperature

1 visittime

from 6,000 ₸cost

Problem
The Gorenje oven was not reaching temperature: it heated weaker than the set temperature, and baked goods did not bake through.
What we did
The technician removed the control panel, took out the old thermostat with the capillary tube and bulb, installed a new one, secured the bulb in the chamber, connected the wires, and checked the heating with a thermometer.
Result
The oven again reaches the set temperature; heating was checked with a thermometer.
I want the same
Ardo oven: not reaching temperature — after repairBeforeAfter
01 / 04
All repairs
TECH SERVICE mobile technician with a tool case

How Gorenje oven repair works at your home in Astana

Five steps from request to checking the oven's performance.

  1. Requeston the day of request

    Describe the symptom and oven model so the technician brings the right tools.

  2. Technician visitwithin 60 minutes

    The technician brings tools for the described symptom and model to avoid extra trips.

  3. Diagnosticson site

    The technician finds the cause of the issue and quotes the cost of work.

  4. Approval of workafter inspection

    You decide whether to proceed with the repair right away or think it over.

  5. Check and warrantyafter repair

    The technician checks heating and component operation after reassembly.

Leave a request

We reply during working hours

Book Gorenje oven repair in Astana

Describe the Gorenje oven issue and a convenient time. The technician will arrive with tools and common parts, check the cause of the failure, and confirm the repair before starting work.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 021 11 78
Customer reviewsReviewsTECH SERVICE05

Reviews of Gorenje oven repair in Astana

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Амир Р.Order No. TSA-81383 · 9 April 2026

ours

Алдымен интернеттен қарадым, кейін осында келдім. Барлығы ресми, чек берді. Бөлшекті екі күн күттім!!

Repair: oven repair in

Зоя М.Order No. AS-4124 · 11 February 2026

ours

Было важно успеть до конца недели, а то морозы обещали. Диагностика духовки — с неё и начал. Жалоба одна: не держит температуру. По факту меняли: тэн. Сравнивал — здесь дешевле. Привезли на такси, приняли без вопросов. Не разочаровался. Работает, как будто и не ломалось.

Repair: oven repair in

Айбек А.Order No. TSA-49239 · 12 November 2025

ours

Қыс қатты, техникасыз қиын, сондықтан тез жөндеу керек болды. Құрылғы ескі, бірақ жақсы қарайды екен. Ризамын, рахмет.

Repair: oven repair in

Римма Х.Order No. AS-7246 · 24 May 2023

ours

Хотел вызвать на дом, но в ЖК не пускают без пропуска. Жалоба одна: не греет. Дамир М провозился, но сделал. Третий месяц — никаких проблем.

Repair: oven repair in

Лариса О.Order No. 23889 · 14 October 2022

ours

Знакомый мастер раньше здесь работал, дал номер. Вчера работало, сегодня уже не закрывается. Выдали номер заказа и сказали, как отслеживать. Цену держали до конца, молодцы. Тихо, ровно, без сюрпризов.

Repair: oven repair in

Григорий И.Order No. ZK-2021-506 · 22 November 2021

ours

Сосед по площадке хвалил, решил проверить. Утром столкнулся с этим: не держит температуру. Внутри оказалось: термостат. Ни копейки больше обещанного. Приехал без записи, но свободный мастер нашёлся. Ставлю пять. Стоит, работает, радует

Repair: oven repair in

Георгий З.Order No. 1807-4646 · 30 September 2018

ours

Переезжали в новую квартиру, техника после перевозки захандрила. Приехал с дачи, а тут — не греет. Выдали номер заказа и сказали, как отслеживать. Замена: термостат. Цену держали до конца, молодцы. Обращусь ещё. Пользуюсь и вспоминаю добрым словом

Repair: oven repair in

Михаил У.Order No. AS-8530 · 30 April 2018

ours

Смотрел, чтобы был свой склад запчастей, а не под заказ. Позвонил насчёт духовки. С этим и пришёл: не держит температуру. Радик Т посмотрел и честно сказал: менять не надо. На ресепшене оформили за пару минут, выдали квитанцию. Нужна была новая деталь: термостат. Сравнивал — здесь дешевле. Пользуюсь и вспоминаю добрым словом.

Repair: oven repair in

Зоя М.Order No. 1603-7476 · 7 June 2016

ours

Дамир М — мастер от бога, если можно так сказать. Пришлось ставить: термостат. Тихо, ровно, без сюрпризов.

Repair: oven repair in

Оксана Т.Order No. 1612-1198 · 2 March 2016

ours

Сосед по площадке хвалил, решил проверить. Ни с того ни с сего — не держит температуру. Нагрев в норме, посторонних звуков нет.

Repair: oven repair in
See all reviews

Our technicians in Astana

01 / 05
Beknur D., stove and oven repair technicianexperience11 years

Beknur D.

Stove and oven repair technician

Vladimir V., senior washing machine technicianexperience10 years

Vladimir V.

Senior washing machine technician

Ozat K., freezer repair technicianexperience11 years

Ozat K.

Freezer repair technician

Adilkhan N., washing machine installation technicianexperience16 years

Adilkhan N.

Washing machine installation technician

Questions and answersQuestionsTECH SERVICE06

Questions about Gorenje oven repair in Astana

Didn’t find the answer? Message us on WhatsApp.

Ask a question
The Gorenje oven is showing an error code on the display — what does it mean, and can I keep using it?

The code on the display points to a specific fault: with Gorenje, it's most often the temperature sensor, thermostat, or an electronics failure. It's best not to use the oven until the cause is fixed — it could make the problem worse. A technician will give you the exact interpretation after free diagnostics.

The Gorenje oven stopped heating — is it the heating element or the thermostat, and how can I tell before the technician arrives?

If the heating element doesn't glow red when you turn on the heat, but the fan and light work, the heating element has most likely burned out. If it heats but the temperature doesn't hold or the oven turns off too early, the thermostat may be the issue. The technician will make the exact diagnosis on site.

Can a Gorenje oven be repaired if the touch control panel is broken?

Yes, Gorenje touch panels can be repaired: the problem is often in the ribbon cable, contacts, or the module itself. Depending on the model, either a single component or the whole board is replaced. The technician comes to your home and determines exactly what has failed.

The Gorenje oven with convection is noisy and not blowing hot air — is this an expensive repair?

Noise and lack of circulation usually mean a worn bearing or a broken fan blade in the convection fan. This unit is repairable, and the cost depends on the model and the part needed. The technician will give you the exact price after free diagnostics.

Can a Gorenje gas oven be repaired at home, or does it need to be taken to a service center?

Gorenje gas ovens are usually repaired at home if no gas line replacement is needed. The technician arrives with tools and checks the burner, thermocouple, and gas control system. In complex cases, it may need to be transported to a service center.

What should I do if the problem comes back after the Gorenje oven repair?

If the fault recurs, contact the service center under warranty — it covers 1 year on labor and parts. The technician will run diagnostics again and fix the cause. It's important not to disassemble the oven yourself to keep the warranty valid.

Repair guideArticleTECH SERVICE07

Gorenje oven repair in Astana by Tech Service technicians

Beknur D., stove and oven repair technician

Author: Beknur D.,Stove and oven repair technician

Published
Updated

Tech Service repairs electric and gas Gorenje ovens in Astana: a technician arrives at your home within 60 minutes anywhere in the city, diagnostics are free, and there is a 1-year warranty on labor and parts. Technicians with 4 to 20 years of experience understand convection, grills, touch panels, and gas models with thermocouples. The technician provides the price after diagnostics.

Why a Gorenje oven doesn't heat or hold temperature

A Gorenje oven most often fails to heat due to a heating element, thermostat, or sensor. Let's look at how to tell these causes apart by the appliance's behavior and what the technician checks.

Not heating at all or heating weakly

  • Upper and lower heating elements: two separate heaters are responsible for their zones, and failure of one is already noticeable.
  • Thermostat: turns off the heater when the set temperature is reached, and worn contacts leave the chamber cold.
  • Sensor: sends readings to the control module, and its failure disrupts the heating circuit.
  • Zone testing: we test each heater separately to avoid replacing a working component.
  • Power circuit: a break in the wiring to the heater produces the same effect as a burned-out part.
  • Diagnostic order: first we rule out the thermostat and sensor, then we test the heaters for continuity.

Heats unevenly, burns on one side

Uneven heating is most often caused by a faulty heating element in one zone, a worn door seal, or a sensor malfunction. The seal keeps heat inside the oven, and through a cracked profile, heat escapes—the dish browns on one side and stays raw on the other. A heating element in the upper or lower zone with a partially damaged coil heats weaker than its neighbor, and the difference is visible on a baking sheet. A sensor with shifted readings causes the module to cut heating from one zone earlier. Before replacing parts, the technician checks whether the door fits tightly: misaligned hinges produce the same effect, and adjusting hinges costs less than replacing components. On models with convection, we also check the fan—if the impeller stops, heat flows only from the bottom. If you need Gorenje oven repair in Astana, a technician comes to your home and checks all heating components.

Won't turn on even though the outlet works

  • Fuse: protects the Gorenje oven circuit, blows first during a voltage surge, and cuts power to the appliance.
  • Module power supply: converts mains voltage for the board, and its failure leaves the panel dark.
  • Internal wiring: frayed wires near heaters and terminals cause a break that isn't visible from outside.
  • Buttons and switches: stuck contacts on the panel block program start even with working electronics.
  • Power cord and plug: we check for heat and integrity of the wires, because damage at the base of the plug is common.

Error codes and display signals on Gorenje ovens

A code on the display hints at which component has failed. Below we cover typical Gorenje signals and what to do before the technician arrives.

What error codes on the display mean

Display signalWhat we checkWhat we do
Temperature sensor errorsensor circuit and connectordiagnostics, sensor replacement
Thermocouple error (gas models)thermocouple and ignition unitcheck, thermocouple replacement
Heating errorheating element and power circuitheater test, replacement if broken
Control module errorpanel and wiringrepair or module replacement

Oven turns off by itself after 10-15 minutes

Spontaneous shutdowns usually point to overheating, a faulty thermostat, or a control module failure. The thermostat maintains the set temperature inside the cavity: when its contact burns, heating runs uncontrolled, and the safety cut-off turns the oven off. The temperature sensor may then send distorted readings, and the control module may process them incorrectly. Such shutdowns are usually linked to overheating: the safety cut-off trips when the cavity temperature exceeds the set value. If the shutdown repeats at the same temperature, it's almost always the thermostat rather than a random electronics glitch — so the technician checks the thermostat contact first instead of replacing the board. He also inspects the terminals and wiring to the sensor: a burnt connector produces the same symptoms as a failed component, and replacing it costs less.

Can I use the oven if there's an error on the display?

  • Heating and gas errors: do not use — the cavity may overheat or gas may leak, so unplug the oven and wait for the technician.
  • Temperature sensor error: don't cook — the cavity heats unevenly, and food burns outside while staying raw inside.
  • Control module error: the panel may not hold the mode correctly, so convection and grill work erratically.
  • Resetting by unplugging: you can briefly clear the code by unplugging, but if it comes back, the fault is still there.
  • Burns and smell: with a sensor error, the cavity overheats, grease burns on, and the component wears out faster.
  • Before the technician arrives: leave the door slightly open to cool down and don't try to take the panel apart yourself.

Grill, convection, and control panel as separate Gorenje components

In Gorenje ovens, convection, grill, and the touch panel are three independent components, each with its own diagnostics and symptoms. Let's look at how each failure shows up and where adjustment ends and repair begins.

Grill or convection not working

We check the top heating element and the convection fan separately because they are independent components with different symptoms. The heating element is located at the top of the cavity and provides top heat in the corresponding mode, while the fan blade circulates hot air throughout the cavity, so if it fails, food bakes unevenly even though the oven appears to work. Diagnostics start with testing the heater circuit and checking whether the blades spin: the technician listens to the motor, assesses shaft movement, and checks if air flows into the cavity. Both components are connected to the control module, so the break may not be in the element itself but in the wiring or relay. If the motor makes noise but doesn't circulate hot air, the cause may be a jammed fan blade rather than the motor itself — this changes the scope of work.

Touch control panel broken

  • Ribbon cable: a worn conductor between the panel and the module interrupts the touch signal.
  • Connector contacts: oxidation on the terminals causes the same failures as a failed sensor.
  • Moisture on the board: condensation after cleaning the cavity shorts the traces and blocks response.
  • The control module itself: a damaged board requires repair or replacement of the component.
  • Checking the ribbon cable: before replacing the module, the technician tests the conductor and contacts — oxidation on the connector produces the same symptoms as a failed sensor.

How to tell a component failure from incorrect settings

ComponentSymptomFirst check
Grilltop doesn't heat in grill modeheater and its circuit
Convectionnoise, no hot air circulationfan and blade
Touch paneldoesn't respond to touchribbon cable and module contacts
Lightinglamp doesn't lightbulb and socket

How the repair works and what to do before the technician arrives

Gorenje oven repair starts with free diagnostics, and before the technician arrives there are a few simple steps that speed up the work and help select the right part.

What to do before the technician arrives

  • Cut the power to the oven: turn off the breaker in the panel or unplug the oven — this is a must before any work.
  • Don't take the panel apart: disassembling components yourself makes diagnostics harder and can hide the original cause of the breakdown.
  • Find the nameplate: write down the model and serial number from the sticker on the body — they are used to select the part.
  • Describe the symptom: tell us exactly what happens and when it started — this narrows down the components to check.
  • Don't pull out a built-in oven: most components can be accessed by removing the front panel right on site.

How diagnostics and repair work

Diagnostics are free, the technician arrives at your home within 60 minutes anywhere in the city and gives you the cost of work after the inspection. First, he checks the power supply, the heating element integrity, the thermostat readings and the control panel operation, comparing them with the symptoms you described over the phone. Based on the inspection, he explains which component has failed and what repair options are possible — you approve the scope before work begins. If the breakdown can't be fixed on site, the appliance is serviced at the service center, and the technician explains in advance why this option is needed. We provide a 1-year warranty on labor and parts. The exact model and the described symptom significantly reduce the time needed to find the fault.

How the part is matched to the model

  • Part selection by model: the required component is selected using the oven's nameplate and series to avoid mistakes with the modification.
  • Rare part for the model: if a specific component for a particular Gorenje modification is needed, its replacement is agreed upon after diagnostics.
  • Model from the nameplate: the serial number and model designation help select the right part for the specific modification.
  • Built-in Gorenje ovens: for these, the part is selected by the body marking, not by the appearance of the front panel.
  • Approval before installation: you find out which part is needed and why before replacement begins.

On-site repair, built-in and gas models

The service format depends on the type of Gorenje oven: built-in and gas models are repaired differently, and this determines whether a technician comes to you or the appliance is taken to the service center.

Do you repair Gorenje ovens on site?

  • Technician visit: we come to the client anywhere in the city, on-site diagnostics are free.
  • What we fix on site: heating, convection, control panel and most typical Gorenje faults.
  • When service center is needed: if a breakdown can't be fixed on site, the repair is done at the service center.
  • Our own technician: Tech Service is a direct contractor, our employee arrives, not an intermediary.
  • Payment and warranty: we accept Kaspi QR, Kaspi Red, bank card, cash or bank transfer, provide a 1-year warranty on labor and parts.

Built-in Gorenje oven — can it be repaired?

In most cases, we repair built-in Gorenje ovens on site without removing them from the kitchen cabinet. The technician removes the front panel, checks the heating elements, thermostat and convection fan right in the niche — access to these components is through the front of the body. The control panel is removed separately: underneath are the wiring harnesses and the module, which most often fail during uneven heating. When access to the back of the body is needed, the technician carefully pulls the oven out of the niche and puts it back after the work — the fasteners are not damaged, and the surrounding furniture remains intact. Gorenje built-in appliances sit tightly in the cabinet, and rough pulling tears the seals and scratches the facade, so this work is entrusted to a technician with experience specifically with built-in models.

Gorenje gas oven — on site or at the service center?

We repair Gorenje gas ovens on-site, paying special attention to the thermocouple and ignition unit, which are responsible for safety. The thermocouple cuts off the gas supply when the flame goes out, and the ignition unit lights the burner — a failure of either component makes the oven dangerous, even if the heating appears to work. We check the gas part first: we inspect the tightness of connections, the condition of the nozzles and the draft, and only then move on to the ignition and heater. This sequence is not a formality: a leak through a loose connection is more dangerous than a non-working grill, and it must be ruled out before any other work. When replacing the thermocouple or nozzle requires disassembling the body deeper than the niche allows, the appliance is taken to the service center.

Warranty, maintenance, and who to trust with the repair

Warranty, maintenance, and the choice of contractor directly affect how long a Gorenje oven will last after service. Let's go through these points in order.

What warranty covers Gorenje oven repair

We provide a 1-year warranty on labor and parts. The warranty also covers replaced parts: if an installed component fails within the term, it is replaced again at no extra cost. The warranty applies to the work performed and the parts installed, so the owner doesn't have to prove that the breakdown is related to the repair. This eliminates disputes about the cause of the malfunction and extra costs on repeat visits. In my opinion, this is the main guideline when choosing a contractor — a warranty on the part is more important than a promise to 'fix it forever.' Before starting work, clarify what exactly is covered by the warranty period and which components it applies to: that way you know in advance what to expect if you need to call again. Keep your repair documents — they make it easier to confirm a warranty case.

Why Gorenje ovens break down and how to avoid it

  • Burnt-on grease: clean the cavity after cooking to avoid overheating the heating element and clogging the ventilation channels.
  • Voltage surges: connect the oven to a stable power line; surges in the mains can damage the control module.
  • Improper use: don't leave the door open during heating — the thermostat can't stabilize the temperature.
  • Preventive maintenance: check the door seal and hinges once a season to avoid heat loss and overloading the heater.
  • Early contact: don't delay calling at the first symptoms, before the fault affects neighboring components.

How to tell that a technician really knows Gorenje

Tech Service is a direct contractor: our own employee comes to your home, and specialists with 4 to 20 years of experience understand Gorenje's design. Qualification also shows in how a person starts the conversation: they immediately ask for the model from the nameplate and clarify the series, rather than promising to 'fix any oven.' Different lines have different control modules, heating element wiring diagrams, and sensor locations — someone who knows these nuances doesn't waste time guessing. Clarifying the model from the nameplate helps to understand in advance which series you'll be working with. If a contractor doesn't ask about the model and series but gives a solution blindly, be wary: a one-size-fits-all approach to Gorenje often leads to repeat calls. Ask which series of the brand the specialist works with most often — the answer will show their real experience.

Why Gorenje oven repair makes sense

Let's sum up the key points a Gorenje oven owner should keep in mind: from typical causes of breakdown to what to do when one occurs.

  • Cause of 'not heating': most often it's the heating element, thermostat, or temperature sensor — these are checked first.
  • Code on the display: hints at the component, but the decoding is checked against the specific model, not a general table.
  • Before the technician arrives: cut power to the oven at the breaker and don't disassemble the panel — this protects the wiring and electronics.
  • Prevention: burnt-on grease on heaters and voltage surges accelerate wear on components, so cleaning and stable power extend service life.
  • Choosing a contractor: a direct service with a warranty on labor and parts is more reliable than an aggregator where responsibility is blurred between intermediaries.

41brands

Besides Gorenje, we repair other oven brands in Astana

Choose your oven brand to go to its page with a description of services and common issues.

We also repairWe also repairTECH SERVICE08

Besides Gorenje oven repair, we fix other equipment in Astana

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE09

Worth reading before Gorenje oven repair in Astana

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp