Open until 19:00+7 (778) 096 59 61Call a technician
Tech Service technician next to a microwave oven

Horizont Microwave Oven Repair in Astana

A technician arrives within 60 minutes anywhere in the city. Free diagnostics, 1-year warranty on labor and parts.

  • 1-year warranty
  • Arrival within 60 minutes
  • Free diagnostics

Our own technicians4 to 20 years of experience

Kairat A.Ruslan S.Nikita O.Kuanysh A.

Repair prices

  • Diagnostics0 ₸
  • Backlight lamp replacementfrom1 500 ₸
  • Mica plate replacementfrom3 000 ₸
  • Fuse replacementfrom4 000 ₸
  • High-voltage capacitor replacementfrom4 500 ₸
All prices
ours5,06 127 reviews
order database
Common faultsCommon faultsTECH SERVICE02

Common Horizont microwave faults in Astana

The symptoms customers most often report. The technician will determine the exact cause after diagnostics.

PricesPricesTECH SERVICE03

How much Horizont microwave repair costs in Astana

The table shows microwave repair prices for Horizont in Astana: labor cost "from" (parts not included) and the timeframe; the technician confirms the final amount before starting the repair.

Backlight lamp replacementparts not included

1–2 hours

from1 500 ₸

Mica plate replacementexact price — after the free diagnostics

1–2 hours

from3 000 ₸

Fuse replacementparts not included

1–2 hours

from4 000 ₸

High-voltage capacitor replacementparts not included

1–3 hours

from4 500 ₸

Tray motor replacementparts not included

1–2 days

from4 500 ₸

Before and afterBefore and afterTECH SERVICE04

Before and after Horizont microwave repair in Astana

Inter-turn short circuit of the transformer

1–2 hourstime

from 8 500 ₸cost

Problem
The Horizont microwave hummed loudly on startup and did not heat, and from the second or third switch-on it tripped the mains fuse.
What we did
The technician removed the casing, unscrewed the old high-voltage transformer from the base, installed a new one of the same power and connected the wires.
Result
The oven was tested by heating water — it heats evenly, without humming; a 1-year warranty is given for the work and parts.
I want the same
Daewoo microwave: inter-turn short circuit of the transformer — after repairBeforeAfter
01 / 04
All repairs
TECH SERVICE mobile technician with a tool case

How Horizont microwave repair works at your home in Astana

Five steps from request to checking the microwave's operation.

  1. Requestsame day

    Describe the fault and your Horizont microwave model.

  2. Approvalbefore repair

    The technician lists the work and parts, and you confirm the scope before repair begins.

  3. Diagnosticsfree

    The technician finds the cause of the fault and quotes the repair cost.

  4. Repairafter approval

    Work is performed after the cost and parts are approved.

  5. Checkafter repair

    The technician checks the microwave's operation and provides a 1-year warranty on labor and parts.

Leave a request

We reply during working hours

Book Horizont microwave repair in Astana

Describe the fault and a convenient time. The technician will arrive with tools and common parts, check the appliance, and agree on the scope of work with you before starting the repair.

TECH SERVICE administrator replying to a customer's WhatsApp message

Warranty question? Call us

+7 (778) 096 59 61
Customer reviewsReviewsTECH SERVICE05

Reviews of Horizont microwave repair in Astana

5,0ours

6 127 reviews of repairs at TECH SERVICE in total

Борис В.Order No. 2610-5048 · 6 May 2026

ours

С левого берега ехать далеко, поэтому искал поближе к дому. Основная жалоба — не крутится тарелка. Гудит ровно, не перегревается

Repair: microwave oven repair in

Эвелина Ш.Order No. AST-2509-199 · 10 July 2025

ours

Раньше обращался в другой сервис, там очередь на две недели. Открыл — и сразу понял: искрит. Tech-service посоветовали в домовом чате. Ни шума, ни запаха, всё штатно.

Repair: microwave oven repair in

Пётр Ч.Order No. 70256 · 4 January 2025

ours

Выбирал между официальным и этим, выбрал этот. Приехал с дачи, а тут — искрит. Шум ушёл, работает мягко.

Repair: microwave oven repair in

Юрий М.Order No. ZK-2024-559 · 10 July 2024

ours

Офис на Кабанбай батыра, технику туда и повёз. С этим и пришёл: не крутится тарелка. Дамир М — мастер от бога, если можно так сказать. Ни разу не пожалел

Repair: microwave oven repair in

Эвелина Ш.Order No. TSA-53722 · 10 February 2024

ours

Дамир М провозился, но сделал. Приняли, объяснили, что и почему, без спешки. Проверил на всех режимах — держит!!

Repair: microwave oven repair in

Екатерина К.Order No. TSA-91571 · 2 May 2023

ours

Смотрел, чтобы был свой склад запчастей, а не под заказ. Жалоба одна: не греет. После ремонта — как новое

Repair: microwave oven repair in

Леонид П.Order No. AST-2202-708 · 1 June 2022

ours

Живу в Есиле, искал сервис, чтобы не тащиться через весь город. Больше всего мешало: не греет. Функционирует, тьфу-тьфу.

Repair: microwave oven repair in

Оксана Т.Order No. AS-8834 · 25 April 2021

ours

Живу в Есиле, искал сервис, чтобы не тащится через весь город. Диагностика микроволновой печи — с неё и начал. Проблема ровно одна: не греет. Обошлось заменой: трансформатор. Вышло около 29 500, точнее не считал. Внешне не видно, что разбирали.

Repair: microwave oven repair in

Галина Ф.Order No. TSA-95121 · 30 January 2020

ours

Хотел вызвать на дом, но в ЖК не пускают без пропуска. Позвонил жене, говорит: не крутится тарелка. В другом месте просили на треть больше. Всё оформили по договору, с печатью и подписью. Обошлось заменой: трансформатор. Проверил на всех режимах — держит

Repair: microwave oven repair in

Вера Э.Order No. AS-2318 · 4 April 2018

ours

Заявку оставил через сайт вечером, утром перезвонили. Открыл — и сразу понял: не греет. Всё быстро, но без суеты. Итог — 27 500 тенге, ничего сверху. Ни разу не пожалел)

Repair: microwave oven repair in
See all reviews

Our technicians in Astana

01 / 08
Kairat A., senior small appliance technicianexperience14 years

Kairat A.

Senior small appliance technician

Ruslan S., on-site coffee machine diagnostics technicianexperience15 years

Ruslan S.

On-site coffee machine diagnostics technician

Nikita O., coffee machine cleaning technicianexperience5 years

Nikita O.

Coffee machine cleaning technician

Kuanysh A., coffee machine diagnostics technicianexperience12 years

Kuanysh A.

Coffee machine diagnostics technician

Aydar A., portafilter coffee machine technicianexperience5 years

Aydar A.

Portafilter coffee machine technician

Serikbay A., vacuum cleaner repair technicianexperience12 years

Serikbay A.

Vacuum cleaner repair technician

Artur G., vacuum cleaner repair technicianexperience15 years

Artur G.

Vacuum cleaner repair technician

Akzhol K., washing machine repair technicianexperience18 years

Akzhol K.

Washing machine repair technician

Questions and answersQuestionsTECH SERVICE06

Questions about Horizont microwave repair in Astana

Didn’t find the answer? Message us on WhatsApp.

Ask a question
Do you repair Horizont microwaves in Astana if the model is discontinued?

Yes, we do: we identify the fault by the component, not by the year of manufacture. For discontinued models, we source compatible parts, but the outcome depends on the specific model and the availability of the required component.

My Horizont microwave stopped heating — is it the magnetron or something simpler?

It's not necessarily the magnetron: often the high-voltage diode, capacitor, or fuse is to blame. The exact cause will be shown by free diagnostics after opening the unit, and the technician will then quote the cost.

My Horizont microwave sparks near the wall — is it still safe to use or already dangerous?

Do not use it: sparking near the wall is often caused by a burnt mica plate or dirt, and it's a fire hazard. Unplug the appliance and call a technician who will check the component and replace the damaged parts.

My Horizont microwave turntable isn't spinning — is it the motor or something more serious?

Most often it's the turntable motor or coupling, less often the rotation mechanism; it depends on the model. The technician will check both components and replace the faulty one, after which the turntable will rotate evenly again.

My Horizont microwave clicks and won't turn on — what could it be?

Clicking when trying to turn it on is usually related to the door microswitches, fuse, or control board. Before the technician arrives, check that the door is closed tightly and that the outlet has power.

Do you provide a warranty for Horizont microwave repair in Astana, and what exactly does it cover?

Yes, 1-year warranty on labor and parts. If the problem returns within this period, the technician will come and fix it under warranty.

Repair guideArticleTECH SERVICE07

Horizont Microwave Repair in Astana by Tech Service

Kairat A., senior small appliance technician

Author: Kairat A.,Senior small appliance technician

Published
Updated

Tech Service repairs Horizont microwaves in Astana: our technician comes to your home within 60 minutes or takes the appliance to the service center. Diagnostics are free, 1-year warranty on labor and parts, technicians have 4 to 20 years of experience. The technician quotes the price after diagnostics, and you can pay any way you like.

Why Your Horizont Microwave Won't Heat, Won't Turn On, or Sparks

In a Horizont, as in any microwave, heating, startup, and sparking depend on different components. Let's break down what's behind each symptom and what you can realistically check before calling a technician.

Not Heating, But Light and Fan Work

If your Horizont microwave hums, the light is on, and the turntable spins, but the food stays cold, heating isn't starting — most often the issue is the magnetron or the high-voltage circuit that powers it. The humming comes from the high-voltage transformer, not the emitter itself. We check the whole chain: transformer, high-voltage capacitor, high-voltage diode, and only then the magnetron. We also inspect the waveguide's mica plate — charring there can also disrupt heating. In my experience with this brand, the diode burns out more often than the emitter itself, even though the complaint is always the same. We start Horizont microwave repair in Astana by checking the high-voltage circuit, not by replacing the magnetron. The magnetron is replaced only after testing the transformer, capacitor, and diode — otherwise the new part will fail for the same reason, so diagnostics start with the circuit, not the magnetron itself.

Won't Turn On or Clicks When Starting

When a Horizont microwave won't turn on at all, or clicks and then dies, we first check the power supply and fuse, then the door lock and latches — they block startup if the door isn't closed tightly. The power cord is also on the list: a frayed cable at the base of the body gives exactly this symptom. A click followed by silence often means the protection circuit tripped for a reason: turning it back on without checking the cause can finish off the fuse and nearby components. So at the first click, unplug the oven and don't start it again. A technician arrives within 60 minutes in the city, and diagnostics are free — they pinpoint the cause on site without unnecessary disassembly. Replacing the fuse without finding the short circuit that caused it is pointless: the new one will blow on the next start.

Sparking Inside, Turntable Not Spinning, or Louder Humming

Sparking at the cavity wall is most often due to a burnt mica plate or a dirty waveguide, while a stationary turntable and increased humming point to the turntable motor or cooling fan. The mica plate covers the waveguide inlet and over time gets charred by grease splatters — then arcing strikes directly into the cavity. The turntable motor fails independently of heating, so the oven heats but the plate doesn't turn. Louder humming comes from the magnetron's cooling fan: a dried-out bushing or accumulated dust increases noise. The Horizont touch panel isn't always replaced entirely — sometimes just the membrane needs changing, but the decision is made after checking how the panel sends commands to the control board. Don't run a sparking oven until it's inspected — arcing damages the cavity enamel, and repairs become more expensive.

Horizont Display Error Codes and What They Mean

Models with electronic controls show a code on the display when the board detects a fault. This hint narrows down the suspect components but doesn't replace diagnostics.

How to Read an Error Code on the Display

A code on your Horizont microwave display is the control board's signal that a component is out of acceptable parameters, and it should be interpreted along with symptoms: is the cavity heating or not, is the turntable spinning, is there sparking. First, note the code itself and when it appears — at startup, mid-cycle, after opening the door. Then compare with behavior: a silent magnetron with the fan running rules out one branch, humming with a stopped turntable rules out another. On models with a touch panel, add a membrane check: a stuck button gives a false signal, and the board goes into error without a real fault. If you need Horizont microwave repair in Astana, decoding the display code helps the technician quickly locate the faulty component. The same code on different Horizont models can point to different components, so during diagnostics we compare it with the appliance's behavior rather than relying on the symbols alone.

Typical Code Groups and What They Indicate

Code groupWhat it indicatesWhat we check
Heating errorMagnetron or high-voltage circuitTransformer, capacitor, diode, magnetron
Temperature sensor errorOverheating or faulty sensorCooling fan, sensor
Panel errorTouch membrane or control boardMembrane, ribbon cable, board
Rotation errorTurntable motorMotor, drive, tray

When an error code needs a technician and when a check is enough

If the message appears once after a power surge and the appliance works normally after a reset, observation is enough; but a recurring signal or the same signal along with no heating is a reason to call a technician. Our free diagnostics comes before any work: the specialist measures the high-voltage circuit, checks the membrane and sensors, and doesn't just clear the symbols from the display. A reset doesn't fix the cause—it only removes the signal, so if the error reappears, it's important to note what actions preceded it: this speeds up diagnostics. In our practice, panel signals on Horizont are more often a stuck membrane than a burned-out board—but only measurement confirms it. It's also worth noting how long ago the mode was changed: a jump in component operation is noticeable by the time between switching on and the code appearing.

Is it dangerous to use a microwave if it sparks, smokes, or smells burnt

Sparking, smoke, and a burnt smell are not cosmetic defects but signals that something inside the chamber or in the electrical circuit is burning. Let's look at when to unplug the appliance immediately and what to do before inspection.

Signs that mean you should unplug the microwave immediately

If a Horizont microwave sparks at the wall, smokes, or smells of burnt wiring or plastic, unplug it immediately and do not turn it on until a technician inspects it. Sparks at the right wall of the chamber usually mean the mica plate covering the waveguide is broken—microwave energy strikes the metal through it and burns the edges of the hole. Smoking and the smell of burnt plastic indicate overheating of the wiring, transformer winding, or high-voltage capacitor. Crackling and clicking with the door closed are signs of a high-voltage diode breakdown or choke damage. And you need to unplug it from the outlet: on some models the indicator goes out but the circuit remains energized. Until the burnt plate is replaced, each start continues to destroy the waveguide and can damage the magnetron. If you need microwave repair Horizont price, the technician quotes the cost after free diagnostics.

What you can do before the technician arrives

  • Cut the power: pull the plug from the outlet and do not turn the appliance on until inspection, even if the sparks were isolated.
  • Do not open the case: removing the panel without discharging the capacitor is life-threatening—the high-voltage circuit retains a charge.
  • Remove the dishes: take out the plate and rack, inspect the chamber for signs of soot and melting near the walls.
  • Ventilate the room: open a window if the burnt smell remains, and do not cook in the appliance until the specialist arrives.
  • Note the circumstances: when the smell, smoke, or sparks appeared—these details speed up on-site diagnostics.
  • Preserve traces of soot: do not clean the chamber with harsh chemicals before inspection—they help the technician find the source of damage faster.

How safety is checked after repair

After replacing damaged components, we check the door interlock, make sure there's no sparking, and verify even heating and the absence of unusual noises. We pay special attention to the door latch: if even one fails, the generator should not start with the door open. The choke — a metal quarter-wave groove around the door perimeter — suppresses microwave radiation at the joint between the door and the body, and its deformation or a thick layer of carbon buildup reduces protection. We check for radiation leakage around the door perimeter and in the waveguide area. Keep an eye on the condition of the door seal and choke: their wear over time can cause leakage even if the appliance seems to work fine. That's why after any repair involving the door or waveguide, we inspect the seal separately and ask the owner not to ignore darkening and microcracks on it.

How Horizont microwave repair in Astana works from request to warranty

We handle Horizont microwave service in one consistent order — from request and visit to post-repair check and warranty. Let's go through each step.

Request, visit, and free diagnostics

Once you request a visit, our technician arrives at your home within 60 minutes anywhere in the city, or you can bring the appliance to the service center. The inspection is free and happens before any work — we don't charge for finding the cause. During the visit, the specialist opens the chamber, checks the high-voltage circuit, magnetron, door latch, and touch membrane to pinpoint the exact component that failed. At the service center, the same checks are done on the bench, where it's easier to test the transformer and capacitor. During the inspection, it's important to tell the specialist the circumstances that led to the symptom — this shortens the search for the cause and helps avoid replacing parts "just in case." The more precisely you describe what preceded the failure, the faster we find the culprit.

Approval of work and cost after diagnostics

The technician gives the cost of restoring Horizont microwaves after free diagnostics, once it's clear which components need replacing; work and parts are agreed upon before any work begins. We don't start disassembly until you've confirmed the scope: the list includes specific operations — replacing the mica plate, turntable motor, touch membrane, or magnetron. Horizont service isn't more expensive "because of the brand" — the total depends on which component failed: replacing the mica plate and replacing the magnetron are operations of different scope. That's why we price the same "not heating" fault differently in two units, and you see upfront what the total consists of. The estimate is fixed before the specialist picks up a tool.

What the warranty covers and what to do if the fault returns

We provide a 1-year warranty on labor and parts: if after service the Horizont microwave stops heating again or the same fault appears, the appliance is inspected again. The warranty covers the work performed and the parts installed, so if you contact us again, it's important to describe any changes in the appliance's behavior after the visit. Our technicians, with 4 to 20 years of experience, compare the symptom with the component that was replaced and check adjacent circuits during the follow-up inspection — sometimes the return of the "same" symptom is caused by a neighboring element that was fine on the first visit. You can pay via Kaspi QR, Kaspi Red, bank card, cash, or bank transfer for companies. Keep a description of the symptom and the conditions under which it appears — it speeds up the follow-up check and helps the technician find the real cause faster.

Repair formats and what we check at the end

FaultWhere we fix itWhat we check
Not heatingAt home or at the service centerMagnetron, high-voltage circuit
SparkingAt homeMica plate, chamber, waveguide
Won't turn onAt homePower supply, fuse, door latch
Turntable not spinningAt homeTurntable motor, drive
Touch not respondingAt the service centerTouch membrane, control board

Repair or a new microwave when a Horizont isn't worth fixing

Not every Horizont microwave is worth restoring: sometimes replacing a component brings the appliance back to life, and sometimes it's more honest to tell the owner right away that it's time for a replacement. Let's look at where that line is.

When repairing a Horizont is justified

Restoring a Horizont microwave is usually justified if the body and cavity are intact and the fault is local — a mica plate, fuse, turntable motor, or door latch. These components fail individually and don't take the rest of the circuit with them. The mica plate burns from grease splatters and stops letting waves through, the fuse blows during a voltage spike, the turntable motor stops the plate from spinning, and the door latch stops closing the interlock circuit. Each of these parts is replaced separately, without touching the magnetron or high-voltage block. At Tech Service, we agree on the work and parts before starting, so the owner understands exactly what is being replaced. A local breakdown doesn't mean the appliance is old and falling apart: after replacing one component, the microwave can keep working for a long time if the other parts are in good shape.

When repair may not be worth it

Restoration is worth reconsidering if the cavity is damaged, the magnetron has burned out along with the high-voltage circuit, or the model is discontinued and the needed component is hard to find. A burned-through cavity isn't just marks on the walls: the geometry and shielding are compromised, and restoration requires replacing large panels. The microwave stops heating when the magnetron or high-voltage circuit fails, and here several expensive components are involved at once. For a discontinued model, repairability is limited: the part is either no longer supplied or takes a long time to find, and compatible analogs don't always fit. Even in such cases, the decision is made after diagnostics: sometimes replacing one component costs less than a new appliance, and sometimes the combination of work makes restoration impractical.

How to decide before paying

We help you decide whether to repair or replace during free diagnostics: the technician explains which components are faulty and what scope of work is ahead. The check goes along the chain from power supply to magnetron, so you see the big picture, not just one symptom. The technician shows components that have reached the end of their life and those that still have some left, and the owner decides without pressure. If doubts remain after diagnostics, it's useful to compare the upcoming scope of work with the condition of the other components — that's more honest than focusing on just one symptom. The repairability of an old model is also assessed on site: the condition of the cavity, door, and wiring shows whether the appliance will survive a part replacement. This conversation happens before payment, and you can decline the work at this stage without any consequences.

When a Horizont microwave oven repair pays off

Briefly about the factors that determine the outcome of restoring a Horizont microwave: which component failed, how safely the appliance behaves, and when the work is economically justified.

  • Not heating but working: the cause is more often the magnetron or high-voltage circuit, so diagnostics start with the high-voltage path.
  • Error code on the display: narrows down the suspect components, but it needs to be interpreted together with symptoms and how the appliance behaves when started.
  • Sparking, smoke, burning smell: unplug the appliance immediately and don't start it until a technician inspects it.
  • Restoration is justified: when the fault is local and the cavity is intact; if the cavity is damaged or the part is hard to access, the decision is made after diagnostics.
  • Scope of work and cost: discussed before work begins, and the warranty covers the work performed and the parts installed.

40brands

Besides Horizont, we repair other microwave brands in Astana

Our technicians work with microwaves from various brands. Choose a brand to learn more about repairs.

We also repairWe also repairTECH SERVICE08

Besides Horizont microwave repair, we fix other equipment in Astana

Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.

BlogBlogTECH SERVICE09

Worth reading before Horizont microwave repair in Astana

Leave a review

Choose a platform — the TECH SERVICE page will open.

Send a review with photos on WhatsApp