Екатерина К.Order No. 2612-2689 · 13 July 2026
oursПричина обращения — сломался динамик. Турарбек Кайрош не пропал после ремонта, помог с настройкой. Сейчас пашет без нареканий.
City
Language
What broke
Sections
Message on WhatsApp+7 (778) 096 52 04Mon–Fri 10:00–19:00, Sat–Sun 11:00–18:00
We take Xiaomi and Redmi phones with any symptoms. Free diagnostics, technician arrives within 60 minutes anywhere in the city.
Our own technicians4 to 20 years of experience




Repair prices
Eight typical failures that Xiaomi owners most often come to us with: from a cracked screen to charging and sound problems.
drop, impact on the body, crack
from3 000 ₸
pressure on the glass, flex cable, moisture
from4 500 ₸
battery wear, swelling, controller
from5 000 ₸
port, cable, power controller
from4 500 ₸
battery, button, board
from4 000 ₸
cracked glass, module, flex cable
from4 000 ₸
speaker, microphone, flex cable
from4 000 ₸
drop, impact, adhesive wear
from3 000 ₸
The table shows how much phone repair for Xiaomi costs in Astana: the labor price "from", excluding the part and the timeframe, with the final amount agreed with the technician before any repair begins.
1–3 daystime
from 9 500 ₸cost

BeforeAfter5 steps

Five steps from request to checking the device after the work.
Describe the model and symptoms, and attach a photo if needed — the technician will agree on a convenient time.
The technician checks the screen, ports, and board; after the inspection you get the cause and the cost of work.
You confirm the scope of work and the type of part; only then does the technician start.
The technician performs the agreed scope of work with the chosen parts; payment and warranty are discussed in advance.
After reassembly, the device goes through a general performance test to make sure the result is good.
We reply during working hours
Tell us the model and symptom — the technician will agree on a convenient time and give you the price before work starts. Free diagnostics, 1-year warranty on labor and parts.

Warranty question? Call us
+7 (778) 096 52 046 127 reviews of repairs at TECH SERVICE in total
Екатерина К.Order No. 2612-2689 · 13 July 2026
oursПричина обращения — сломался динамик. Турарбек Кайрош не пропал после ремонта, помог с настройкой. Сейчас пашет без нареканий.
Лариса О.Order No. TSA-31374 · 17 January 2024
oursСосед по площадке хвалил, решил проверить. С чем обратился: разбитый экран. Внешне не видно, что разбирали.
Римма Х.Order No. AS-6227 · 24 April 2023
oursЗнакомый мастер раньше здесь работал, дал номер. Думал, показалось, ан нет: не включаеться. Все функции проверил — работают.
Константин О.Order No. AS-2014 · 10 March 2023
oursТехника на балансе ТОО, нужен был чек и акт. Симптом как на ладони: не включается. Про тех сервис слышал на Сарыарке. Работает, даже лучше прежнего.
Юрий М.Order No. AS-7310 · 5 March 2023
oursЗимой без техники никак, поэтому тянуть было нельзя. Позвонил жене, говорит: износ аккумулятора. Работает, даже лучше прежнего
Аркадий Я.Order No. AST-2212-603 · 22 November 2022
oursВ Астане с сервисами беда, поэтому выбирал по отзывам. Настроение было — хуже некуда. Проблема ровно одна: не видит симку. После ремонта — как новое.
Леонид П.Order No. AS-8683 · 5 March 2022
oursДамир М сам позвонил и сказал, что готово. Внешне не видно, что разбирали.
Наталия С.Order No. 2008-6652 · 31 July 2020
oursЖиву в Есиле, искал сервис, чтобы не тащится через весь город. Проблема ровно одна: сломался динамик. Турарбек Кайрош не пропал после ремонта, помог с настройкой. Прошивка та же, ничего не сбросили.
Галина Ф.Order No. AS-7327 · 19 May 2017
oursС левого берега ехать далеко, поэтому искал поближе к дому. Больше всего мешало: сломался динамик. Все функции проверил — работают
Ульяна Ч.Order No. AST-1601-639 · 31 July 2016
oursСосед по площадке хвалил, решил проверить. Жалоба одна: разбитый экран. Дамир М подобрал аналог дешевле, не навязывал оригинал. Тихо, ровно, без сюрпризов.
experience19 yearsLead smartphone repair technician
experience7 yearsPhone flashing specialist
experience10 yearsPhone repair technician
experience18 yearsPhone microsoldering technician
experience5 yearsOn-site phone technician
experience12 yearsSmartphone repair technician
Didn’t find the answer? Message us on WhatsApp.
Ask a questionYes, in most cases it's fixable: the issue lies in the slot itself, the contacts, or the SIM reader. The technician checks the tray, the contact group, and the board, then replaces the faulty component. It depends on the model and the extent of the damage.
That means the problem is with the earpiece or media speaker, not the entire audio path. Often the cause is a dust-clogged speaker, oxidized contacts, or a broken flex cable. The technician checks the speaker and replaces it if necessary.
First, restart the phone and check if the camera is blocked by a case or screen protector. If the error persists, the issue is with the camera module or flex cable, and diagnostics are needed. The camera module can be repaired or replaced separately.
A copy is cheaper but may differ in color reproduction, brightness, and touch sensitivity. An original behaves like the factory one but costs more. The choice depends on the model and your needs; the technician will explain the difference after diagnostics.
Yes, there's a chance if you don't turn on or charge the phone after contact with moisture. The sooner the device gets to the service center, the lower the risk of board corrosion. The technician disassembles the phone, cleans it, and checks the components.
Yes, the approach is the same: diagnostics, approval of work, and repair following the same scheme. The only difference is the design of the components and the available parts for a specific model. We service all three Xiaomi lines.
Tech Service repairs Xiaomi phones in Astana: a technician arrives at your home within 60 minutes or you can drop off your device at the service center. Diagnostics are free, the technician gives you the price after diagnostics, and there is a 1-year warranty on labor and parts. We work with Mi, Redmi, and POCO lines, and our technicians have 4 to 20 years of experience.
Xiaomi phones fail in a few recurring scenarios: battery wear, the charging port, drops, and moisture. Let's look at what's behind each and what the technician checks first.
Most often after an impact, the display module or a loose flex cable is the problem in a Xiaomi, not the board itself. That's why we start by checking the screen and connectors rather than replacing expensive components. The motherboard fails from contact with water or a strong impact when a crack runs through the solder under the controller. We also inspect the display flex cables and power button separately: they come loose from a side impact, and the device seems dead even though the board is fine. If the device shows no signs of life at all (no vibration, no heat at the port), that's a reason to check the circuit on the board and draw conclusions only from the free diagnostics, not from appearances. In such cases, Xiaomi phone repair in Astana starts with checking the flex cables and connectors, not replacing the board.
When a customer says "it won't charge," we check three things in order on a Xiaomi: the Type-C port, the cable and power adapter, and the battery condition. Only then do we name the cause. The port suffers from frequent plugging and moisture, while the battery wears out: capacity drops with cycles, and the phone holds less and less. We check the controller separately if the port and battery are fine but current isn't flowing. Heat at the port during charging usually points to a contact issue rather than the battery itself. In my opinion, this is the most common reason for unnecessary battery replacement. The technician comes to your home or you can drop off the device at the service center, and the warranty on labor and parts is 1 year.
Reboot loops, lost sound, camera errors, and "SIM not detected" are symptoms tied to specific components. Let's break down what they mean and which component to check first.
A cyclic reboot on a Xiaomi most often points to a firmware issue, the power controller, or contacts after moisture, not a "burnt-out" phone. The power controller supplies voltage to the motherboard: if it fails, the device starts, fails a check, and shuts down again, repeating the cycle. Moisture causes oxidation of contacts under the screen and at the port, so the cycle occurs even with intact hardware. A stuck power button keeps the device in a restart state, and a battery drained to zero won't let the board reach operating mode. The picture is the same on Redmi and POCO models. Before drawing conclusions, rule out simple causes: a battery drained to zero and a stuck power button. If the cycle repeats after that, board diagnostics are needed.
If you hear sound in your headphones but not through the speaker, the issue is with the earpiece speaker or the flex cable, not the "audio chip." We check the camera and SIM card slot the same way, component by component. The earpiece speaker and microphone sit on a separate flex cable: a worn contact causes silence even when the board is fine. The camera and SIM slot often share a common flex cable—a loose connector disconnects both at once. Moisture oxidizes the contacts under the screen, and then sound, signal, or camera may fail one after another. A Tech Service technician tests the flex cables and checks connector seating before replacing modules. A missing camera and SIM slot often stem from the same thing—a loose flex cable or oxidation after moisture—so it's worth checking them together rather than replacing modules one by one.
| Symptom | What we check first | Common cause |
|---|---|---|
| Won't turn on after a drop | Screen, flex cables | Display module |
| Won't charge | Connector, cable, battery | Type-C connector |
| Drains fast and heats up | Battery, board | Battery wear |
| Boot loop | Button, contacts, board | Moisture, controller |
| No sound from speaker | Speaker, flex cable | Earpiece speaker |
| Camera or card not detected | Flex cables, slot | Contact oxidation |
Our repair process follows clear steps—from request and free diagnostics to work approval and device check before pickup.
The technician gives the cost after free diagnostics, and work begins only after the client approves the scope. Until then, no one disassembles the device beyond what's needed for inspection. We explain which component is being replaced, why it's necessary, and what happens if replacement is delayed. The owner sees the list of work before any soldering or part replacement—and decides whether to proceed or take the device back. If during work it turns out another component is needed, we get the client's approval again. This way, no unexpected items appear on the invoice, and the final result matches what was discussed during inspection. In my view, this step removes the owner's main worry—not knowing what they're paying for. You can pay via Kaspi QR, Kaspi Red, bank card, cash or bank transfer for companies, and the payment is settled based on the approved scope.
After replacing components, we test the device as a whole—signal, sound, camera, charging—and return it with a 1-year warranty on labor and parts. The technician runs test calls, checks both SIM cards, the microphone on recording and during calls, the touchscreen across the entire surface, and charging from the cable. We also check whether the device heats up under load—this rules out hidden board defects. You get a working phone and a one-year warranty that covers both the work performed and the installed part. How long the repair takes depends on which component is replaced and what diagnostics show. We can give a more precise estimate after inspection, not over the phone: it's impossible to name a timeframe based on a symptom description, and guessing isn't our policy.
We offer two ways to get service: a technician comes to your home, or you drop the device off at our service center. Let's look at when each option makes more sense and how they differ in practice.
Our on-site technician arrives at your home within 60 minutes anywhere in the city — handy when you need your phone close at hand and don't have time to take it somewhere. The visit works as a full on-site diagnostic: the technician opens the device, checks the connector, battery, and board, identifies the cause, and agrees on the work with you. You get the same free diagnostics at your address as at the service center — the format doesn't affect how thorough the check is. If the repair requires complex board soldering under a microscope, the device may need to be taken to the service center — this is discussed on the spot, with no hidden conditions. In our experience, on-site visits are more often chosen by owners whose Xiaomi is their only working phone: the phone stays with them during the check. At your address, it's immediately clear whether a part needs replacing or a cleaning and re-soldering of contacts will do.
Tech Service is a direct provider: the work is done by our own technician, not by an intermediary who passes the request to a third party. Our team has 4 to 20 years of experience, and every on-site technician is a staff member, not a one-off contractor. When you go through an aggregator, you don't know in advance who will do the job or how: one company takes the request, but a technician you have no agreement with shows up at your door. With a direct provider, the same service team is responsible for the work and the warranty — the 1-year warranty on labor and parts is issued by our workshop. In my view, this difference shows up not when you call, but a month later when you need a follow-up inspection under warranty: you know exactly who to contact.
| Format | When it's convenient | Who does the work | Diagnostics |
|---|---|---|---|
| On-site visit | Urgent, no travel needed | On-site repair technician | Free |
| Service center | Complex board repair | Service center technician | Free |
| Service center | Diagnostics of multiple components | Service center technician | Free |
The choice of part depends on the model and the component being replaced. Let's look at the difference between original and copy parts and which Xiaomi lines we take in for repair.
A copy display falls short of the original in color reproduction and touch responsiveness, while a copy battery falls short in capacity and stability — so the choice of part affects how the phone behaves going forward. A full display assembly replaces the glass, the matrix, and the sensor cable, while a separate glass keeps the original matrix but requires careful gluing around the perimeter. Copy batteries lose capacity faster and heat up more under load, especially with fast charging. In our experience, the difference shows up within the first months of active use — not on the day of installation, but later, when the phone starts behaving differently under load. For budget models, a copy is sometimes the only reasonable option, while for flagships the difference in sensor and brightness is more noticeable — it's worth discussing this with the technician before the replacement.
We work with all three Xiaomi lines — Mi, Redmi, and POCO — and use the same diagnostic approach for them, even though the components and parts differ between models. Budget devices more often suffer from charging port issues: the thin flex cable and plastic around the port take the load from the cable. Flagships after drops more often have display module damage — the large glass area and thin frame handle impacts worse. POCO phones are similar in layout to Redmi, but some models have non-standard flex cable routing, and we take that into account during disassembly. The check sequence is the same: power, charging circuit, display, sound, connectivity. Budget Redmi phones more often have charging port issues, while flagships more often have display module damage after drops; so the model matters no less than the symptom itself.
| Component | Options | What it affects |
|---|---|---|
| Screen | Module or glass | Touch, color reproduction |
| Battery | Original or copy | Capacity, heating |
| Port | Component replacement | Charging stability |
| Speaker | Speaker replacement | Sound clarity |
Warranty commitments, technician qualifications, and a direct way of working — these are what Xiaomi owners look at when choosing a service. Let's go over how we handle this and what details to pay attention to before handing over your phone.
We provide a 1-year warranty on labor and parts — it covers the replaced component and the quality of the work performed. If after service your Xiaomi phone acts up again — heats up, won't hold a charge, or turns off — you come back under the same warranty instead of looking for another technician. Component replacements are recorded in the order: you can see which part was installed and exactly what period it's covered for. Our technicians work with Xiaomi boards, power ports, displays, and batteries, so a warranty case is handled for the specific component, not the whole device. For the owner, this means a predictable process: the technician looks at the exact part that was replaced and doesn't shift the blame to other parts. It's best to clarify the warranty terms and exclusions with the technician when you drop off your device — that way there won't be any mismatch in expectations if something goes wrong later.
We've pulled together the key points that shape the outcome of a Xiaomi phone repair: what determines the repair scenario, where to look for the cause most often, and what to check when choosing a technician.
Tech Service technicians repair other appliances too — with the same 1-year warranty on labour and parts.
Refrigerator Repair in Almatyfrom 3 000 ₸
Washing Machine Repair in Almatyfrom 3 000 ₸
Dishwasher Repair in Almatyfrom 3 500 ₸
Oven Repair in Almatyfrom 3 000 ₸
Cooktop Repair in Almatyfrom 3 500 ₸
Air Conditioner Repair in Almatyfrom 3 500 ₸
Boiler and Water Heater Repair in Almatyfrom 2 500 ₸
Freezer Repair in Almatyfrom 6 000 ₸
Tumble Dryer Repair in Almatyfrom 5 000 ₸
Coffee Machine Repair in Almatyfrom 2 500 ₸
Robot Vacuum Cleaner Repair in Almatyfrom 3 500 ₸
Vacuum Cleaner Repair in Almatyfrom 1 500 ₸
Microwave Oven Repair in Almatyfrom 2 000 ₸
Hair Dryer Repair in Almatyfrom 1 500 ₸
Iron Repair in Almatyfrom 3 000 ₸
Electric Kettle Repair in Almatyfrom 2 500 ₸
Mixer Repair in Almatyfrom 2 500 ₸
Multicooker Repair in Almatyfrom 500 ₸
If your phone won't charge, start by checking the adapter, cable, and port, then the charging settings.
16 February 2026 · 12 minutes read
If your phone falls in water, take it out right away, turn it off, and don't charge it.
19 January 2026 · 12 minutes read
If your phone camera isn't working, first check app permissions, clear the cache, and restart your phone — this fixes some software glitches.
24 December 2025 · 13 minutes read
If your phone won't turn on, first check the charging setup: try another cable, adapter, and port, leave the device on charge, and attempt a forced restart.
3 October 2025 · 12 minutes read












